Hopp til innhold

Traxxas 8952 Stub Axle Carriers Rear (Pair) Maxx

Art.nr: TRX 8952

79,-

Traxxas

Traxxas

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Carriers, stub axle (left & right)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 6480X Gear, 19-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

69,-

På lager 1
KJØP
Bulkhead tie bar, rear, upper (1)/ lower front (1)/ lower rear (1) (steel)

155,-

På lager 4
KJØP
Bulkhead tie bar, front, upper (1)/ lower (2) (steel)

155,-

På lager 1
KJØP
3s 5000mAh - 60C - Gens Ace Bashing G-Tech EC5 er et godt valg til radiostyrte biler som krever 3s LiPo. Batteriet har dimensjonene 135x43x27mm og veier 339g. XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere. PS! Produkt kan avvike fra video: Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen. G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov. G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 339g Størrelse: 135x43x27mm Strømplugg: EC5 Balanseringsplugg G-Tech

599,-

649,-

På lager 2
KJØP
-8%
New TRX-6™ Mercedes-Benz G 63 AMG 6x6 The Mercedes-Benz G 63 AMG 6x6 represents a singular vision to create the boldest and toughest all-terrain vehicle ever. Traxxas captures the spirit and no-compromise approach of the Mercedes-Benz G 63 AMG 6x6 with an officially licensed detailed scale replica built on the proven TRX-6 platform. Six drive wheels, three T-Lock™ remote-locking differentials, portal axles, high/low transmission, 6 aluminum long-travel shocks, and a stunningly accurate body with brilliant LED lighting make this the most advanced and capable RC crawler ever to hit the trail. Video:       Traxxas Innovation   Superior 6x6 Design A fully independent intermediate axle puts an extra set of driving wheels where you need them most to power over obstacles that would otherwise be impossible. 6-wheel drive also allows greater traction to attack steeper inclines and more grip over loose and rocky surfaces. Exceptional Body Detail The TRX-6 Mercedes-Benz G 63 AMG 6x6 faithfully reproduces one of the most exclusive and recognizable all-terrain vehicles ever created. Chrome accents, molded trim, and finely detailed lighting elements highlight the rich metallic paint. Traxxas’ uncompromising attention to detail elevates the TRX-6 to the ultimate expression of beauty and brawn. Factory-Equipped LED Lighting Rugged and fully-waterproof, the preinstalled LED lighting blazes a path through the darkest night. Accurate scale details abound in the finely crafted headlights, taillights, and side marker lights. Even the roof visor is fitted with brilliant LED lighting. A dedicated power supply regulates the voltage for bright, consistent, and efficient lighting. Rigid Steel Frame Designed exclusively for the TRX-6 Mercedes-Benz G 63 AMG 6x6, thick 1.5 mm steel frame rails are formed from one solid piece for maximum strength. Extra bracing and crossmembers provide exceptional torsional rigidity to resist chassis twist under load. Full inner fenders and accurately reproduced skidplates enhance the scale realism. Ultimate Ground Clearance Traxxas exclusive portal axles lift the truck at the wheels for huge ground clearance under the axles. In order to achieve the same clearance with straight axles (and not get stuck), your tires would have to be over an inch taller than the TRX-6's tires. Straddling boulders with ease, the TRX-6 chassis definitely takes the path less travelled and simply leaves all the others behind. High/Low Range Transmission When the going gets tough, shift into low range and all six wheels dig in for incredible torque. Shift into high range and the Mercedes-Benz G63 AMG 6x6 transforms the desert floor into an off-road racetrack with massive roosts and 6-wheel power slides. Remote Locking Differentials Traxxas scores another RC first with three transmitter-operated locking differentials. Leave the differentials unlocked to take advantage of the TRX-6’s tight turning radius, even with 6-wheel drive and the long wheelbase. Lock the front differential or lock both rear axles in tandem for extreme 6-wheel all-wheel-drive drive traction. Sleeved micro cables control the differential action for scale appearance. GTS Aluminum Shocks Six oil-filled coil-over GTS shocks deliver silky-smooth damping with threaded aluminum shock bodies for easy ride height adjustments. Specially calibrated rear springs allow full articulation of both rear axles independently for optimal traction on uneven surfaces. 2.2" Wheels Unique 2.2” beadlock-style wheels with contrasting red trim and detailed center caps ride on specially designed all-terrain tires. The soft S1-compound tires come pre-glued and mounted for rugged climbing action. A standard 12mm steel hex is used for compatibility with the full line of TRX-4 wheels and tires.         MORE DETAILS COMING SOON Photos and specifications subject to change.

9.995,-

10.495,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-5%
Traxxas 8994X - Stub axle Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft) (for use with #8995 WideMaxx™ suspension kit) Replacement WideMaxx® outer stub axle assembly. Fits front or rear, left or right side. Replacement part for these models: Maxx® (WideMaxx)

89,-

På lager 4
KJØP
Traxxas 5452X - U-Joints Set U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts) Driveshaft U-joint rebuild kit. Includes carriers (4), cross pins (4), headed pins (4) screw pins (2), hex pins (2), and E-clips (6). Rebuilds 2 driveshafts. Replacement part for these models: Ford® Fiesta® ST Rally Brushless Maxx® Rustler® 4X4 Brushless Slash® 4X4 Brushless Stampede® 4X4 Brushless

129,-

139,-

På lager 2
KJØP
-7%
Scalextric C8312 Easy Fit Guide Blade Pack The Scalextric Easy Fit Guide Blade Pack contains 7 blades for easy connection to your Scalextric cars. What's Inside 7x Blade   Tech Specs Item Scale     1:32 Scale

79,-

På lager 3
KJØP
Traxxas 8996T Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) (for use with #8995 WideMaxx™ suspension kit) The Maxx®-duty driveshaft come assembled and ready to install in your Maxx® truck. Include screw pin and fits front or rear, left or right. Must be used with WideMaxx® suspension arms. Replacement part for these models: Maxx® (WideMaxx)

175,-

På lager 6
KJØP
Stub axle

95,-

** Ikke på lager
KJØP
Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)

129,-

139,-

På lager 1
KJØP
-7%
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

På lager 3
KJØP
-11%
  Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 14.8 V (4S) C Rating: 25 Length: 155 mm Height: 34 mm Width: 45 mm Weight: 476 g   Accessory part for these models: Unlimited Desert  RacerX-Maxx

1.395,-

1.495,-

På lager 4
KJØP
-7%
Traxxas 8799 - Maxx Bearing Kit Restore your Traxxas Maxx to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. ­ MAXX BEARING KIT FEATURES All-inclusive bearing kit Individual box compartments Handy label for identifying parts Fits Maxx®

459,-

489,-

** Ikke på lager
KJØP
-6%
Traxxas 9573 Tires & wheels, assembled, glued (3.8" black wheels, belted Sledgehammer® tires, foam inserts) (2) Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. Sledgehammer tires come pre-mounted to 3.8″ black Sledge wheels with an ultra-tough glue bead for the most extreme high-speed off-road action. Fits 17 mm splined hex, front or rear.

929,-

999,-

På lager 1
KJØP
-7%
Excel 20022 Knife Blade #22 Curved (5) DETAILS Excel Blades - #22 Curved Edge Replacement Blade   #22 Curved Edge Blade - Replacement Blades Carbon Steel Available in packs of: 5, 100, 1000  Razor-sharp, curved edge for added maneuverability The large curved edge blade gives you the ultimate precision that allows you to make a more skillful cut than your traditional blade.  Blade coated with a thin layer of oil for rust protection.  This versatile replacement blade fits with all standard medium to light duty xacto style knives Used with: board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more.  This blade is used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with Excel Blades Handle K2, K5. K6 handles L – 1.820/ H – 0.412/ E – 1.304/ S – 0.345/ T – 0.025 Made in the USA 

45,-

På lager 1
KJØP
 This is the GTR Shock Rebuild Kit by Traxxas. FEATURES: Shock rebuild parts INCLUDES: Four blue plastic shock pistons           Two blue rubber diaphragms           Four black plastic shock ends           Two piston lock nuts           Four metal X-rings COMMENTS: This set will rebuild two shocks

59,-

På lager 5
KJØP
This is the Upper & Lower Steering Arm (Incorporates the servo saver)                        for the REVO from Traxxas. FEATURES: Steel & black nylon construction INCLUDES: Steering arm w/incorporated servo saver, servo saver spring, &             pin. REQUIRES: TRX 2587   2587 Cap Head Screw 3X10mm                   TRX 2582   2582 Button Head Screw 3X30mm                   TRX 5116   5116 Ball Bearings

89,-

På lager 1
KJØP
This is a replacement Half Shaft Set for the Traxxas Revo Truck. This package contains a portion of the telescoping drive shafts. FEATURES: Black plastic construction Blue rubber shaft boots INCLUDES: Two half shaft assemblies REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 120mm (4.7")

89,-

På lager 5
KJØP
These are the Pivot Balls and Pivot Ball Cap Bushings for the           Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.        Two of these pivot balls fit into the axle carriers at each wheel             The pivot ball cap bushings fit between the pivot balls                            and the aluminum caps. FEATURES: Replaces stock pivot balls and pivot ball cap bushings.           Pivot balls are made of steel, pivot ball cap bushings are made of             plastic. INCLUDES: Four pivot balls.           Four pivot ball cap bushings REQUIRES: Threading the pivot balls through the axle carriers and into the             suspension arms.  Placing pivot ball cap bushings between the pivot             balls and aluminum caps.

75,-

På lager 1
KJØP
DEANS PAIRS INCLUDING HEAT SHRINK (5PCS)

69,-

På lager 1
KJØP
         These are 3x8mm Countersunk Hex Head Screws by Traxxas.               Can be used anywhere this type of screw is needed. FEATURES: Metal Construction           Black in Color           Countersunk INCLUDES: (6) Screws SPECS:    Length:   8mm           Diameter: 3mm

35,-

På lager 5
KJØP
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  10mm           Diameter: 3mm

35,-

På lager 4
KJØP
 These are the Traxxas Countersunk 4 x 12mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

På lager 3
KJØP
Body reinforcement set, Maxx® (fits #8911 body)

69,-

På lager 2
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png