Hopp til innhold

Traxxas 8910 Body Reinforcement Set Maxx (Body #8911)

Art.nr: TRX 8910

69,-

Traxxas

Traxxas

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Body reinforcement set, Maxx® (fits #8911 body)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Rebuild kit, GT-Maxx® shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks)

99,-

109,-

På lager 8
KJØP
-9%
Ball bearing, black rubber sealed (6x16x5mm) (2)

59,-

På lager 4
KJØP
Carriers, stub axle (left & right)

79,-

På lager 2
KJØP
Ball bearings, black rubber sealed (12x18x4mm) (2)

109,-

På lager 5
KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

På lager 4
KJØP
-8%
This is the Clear Body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR. FEATURES: Plastic construction Clear INCLUDES: One Clear 1/16 E-Revo Body One Window Masking Set One Decal Set REQUIRES: Polycarbonate paint of modeler's choice Installation on the vehicle SPECS:    Length: 283mm (11.1") Width: 100mm (3.9") Height: 75mm (3")       (B5)

239,-

259,-

På lager 1
KJØP
-8%
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

På lager 11
KJØP
This is the Body for the Stampede from Traxxas. FEATURES: Clear lexan construction Pre-trimmed INCLUDES: One clear body One decal sheet with window, grill and lights decals REQUIRES: Body Mounts, TRX 3614 Polycarbonate Paint SPECS:    Length: 16.5" (419.1mm) Width: 6.25" (158.75mm) at rear wheels (widest point) Width: 6" (152.4mm) behind front wheels (narrowest point) Height: 4.5" (114.3mm) COMMENTS: Body has protective peel coat on outside that should be removed after painting.       (B4)

289,-

329,-

Ikke på lager
Ikke på lager
-12%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-13 Gold).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

På lager 4
KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-18 Metallic Purple).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

På lager 2
KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

På lager 3
KJØP
This is the Traxxas Clear Body for the Rustler VXL FEATURES: Perfectly fits the Traxxas Rustler VXL Stadium Truck Vacuum-formed, clear body INCLUDES: One clear body One decal sheet with window, grill and lights decal sheet One wing REQUIRES: Polycarbonate Paint SPECS:    Length: 15.75" (400.05mm) Width: 5.75" (146.05mm) at widest point Height: 4.5" (114.3mm) COMMENTS: Body has protective peel coat on outside that should be removed after painting.       (B4)

299,-

319,-

** Ikke på lager
KJØP
-6%
    MEDIUM VISCOSITY     MULTI PURPOSE FORMULA     STRONG AND FLEXIBLE      DRIES CLEAR     IDEAL FOR LEXAN PT-22   1/2 oz. Poly-Zap POLY ZAP Is a specialty CA adhesive developed for use on today’s newer plastics. Lexan is one of the more difficult plastics to bond, and POLY ZAP was developed to solve that problem. It works on many types of films and painted surfaces. Its perfect for today’s ARF type models. ABS cowls, canopies, Lexan car bodies, fiberglass repair, model boat parts, and automotive trim are just a few of the many applications for POLY ZAP. To prevent fogging of clear parts do not use a Kicker. Works best on: ABS Delron Fiberglass Lexan Most Acrylics Polycarbonate Nylon Rubber Styrene

99,-

** Ikke på lager
KJØP
Traxxas 9511 Body Sledge Clear w/ Decals Body, Sledge™ (clear, requires painting)/window, grille, lights decal sheet Car Type: Truck Scale: 1/8 Painted: No

539,-

579,-

** Ikke på lager
KJØP
-7%
Traxxas 9513x Body Support Complete w/ Mounts & Roof Skid Pads Sledge

399,-

429,-

På lager 2
KJØP
-7%
Oil Differential 20m Weight

179,-

På lager 7
KJØP
Cush drive key/ pin/ elastomer damper

39,-

På lager 1
KJØP
Differential output yoke assembly, front or rear (assembled with external-splined half shaft)

89,-

På lager 1
KJØP
Bulkhead tie bar, front, upper (1)/ lower (2) (steel)

155,-

På lager 1
KJØP
Shock tower, rear (left & right halves)

95,-

På lager 3
KJØP
Chassis Brace Front Maxx

69,-

På lager 2
KJØP
Shock tower, front (left & right halves)

99,-

109,-

På lager 2
KJØP
-9%
Bulkhead tie bar, rear, upper (1)/ lower front (1)/ lower rear (1) (steel)

155,-

På lager 4
KJØP
This is a pair of pre-mounted Badlands MX38 HP 3.8" Belted Monster Truck Tires. Pro-Line is taking the 3.8" tire game to the next level with the Baddest tire ever conceived: the Badlands MX38 HP BELTED tires! Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the all-new Badlands MX38 HP tires kick that up a notch with Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose & loamy dirt, mud or grass. Just imagine your truck throwing up huge rooster tails with these awesome looking tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. Pro-Line also heard the calls for a new tire size to fit the current generation of Monster Trucks and the all new MX38 HP delivers at 3.48" wide and 6.8" tall. Just like all of Pro-Line's tires, they are proudly Made in the USA! Please note that the Badlands MX38 HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over revving your Badlands MX38 HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires. The new Belted Badlands MX38 HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for backyard bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Badlands MX38 HP 3.8" Belted tires now!

1.049,-

1.099,-

** Ikke på lager
KJØP
-5%
D-MAX Wire Set Red & Black - 14AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m AWG Wire: 14 Area Wire: 2.5mm2 Diameter Wire: 2mm Diameter Insulation: 3.6mm Wire: 400 Strands of Copper @ 0.08 mm Insulation: Silicone Based

69,-

** Ikke på lager
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png