Traxxas

Traxxas 8932 Caster Blocks (Pair) Maxx

Art.nr: TRX 8932

69,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Caster blocks (c-hubs), left & right

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2065R Metal Gear Micro Servo

Traxxas 2065R Metal Gear Micro Servo

Traxxas 2065R Metal Gear Micro Servo The new waterproof 2065R metal gear servo is the perfect upgrade for the shifting mechanisms found on TRX-4 and 1/10 Summit models. It is also a great performance steering upgrade for all LaTrax vehicles. Replaces the 2065X servo Fully waterproof Fits TRX-4 and 1/10 Summit Fits steering in LaTrax models Power: 2.3kg/cm Speed: 0.20 sec/60° All metal geared Fits: Alle TRX-4M 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton® TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Mercedes-Benz® G 500® 4X4² Summit TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

489,-

529,-

-8%

Hovedbilde Traxxas 10230 Suspension Arm Lower F/R & L/R Black (2)

Traxxas 10230 Suspension Arm Lower F/R & L/R Black (2)

Traxxas 10230 - Suspension Arms Lower Black Suspension arms, lower, black (left and right, front or rear) (2) Heavy-duty Maxx Slash lower suspension arms are formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look. Includes left and right arms. Fits front or rear. Replacement part for these models: Maxx® Slash®

119,-

Hovedbilde Traxxas 10244 Skid Plates Front & Rear Maxx Slash

Traxxas 10244 Skid Plates Front & Rear Maxx Slash

Traxxas 10244 - Skidplates Skidplate, front (1), rear (1) Replacement front and rear Maxx® Slash® skid plates Replacement part for these models: Maxx® Slash®

129,-

Hovedbilde Traxxas 5041 Grease Premium High-Performance 20cc ...

Traxxas 5041 Grease Premium High-Performance 20cc ...

Grease, premium high performance (20cc)

159,-

169,-

-6%

Hovedbilde Traxxas 3640 Suspension Screw Pin Set Steel

Traxxas 3640 Suspension Screw Pin Set Steel

These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins Two 34mm pins Two 30mm pins Two 28mm pins Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

-14%

Hovedbilde Traxxas 7828 Bulkhead Front Lower XRT

Traxxas 7828 Bulkhead Front Lower XRT

Bulkhead Front Lower XRT Bulkhead, front (lower) Replacement XRT™ front lower bulkhead

189,-

199,-

-5%

Hovedbilde Traxxas 7844 Skidplate Set Front & Rear with Rubber ...

Traxxas 7844 Skidplate Set Front & Rear with Rubber ...

Skidplate Set Front & Rear with Rubber Impact Cushion XRT Skid plate, front (1), rear (1)/ rubber impact cushion (1) Front and rear skid plates with rubber impact cusion

119,-

149,-

-20%

Hovedbilde Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)

Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

139,-

Hovedbilde Traxxas 7714X Chassis Top Brace X-Maxx

Traxxas 7714X Chassis Top Brace X-Maxx

This is the Chassis Top Brace for the Traxxas X-Maxx Monster Truck FEATURES One-piece molded composite plastic construction INCLUDES Chassis Top Brace SPECIFICATIONS Length: 14.5" (368mm)

99,-

119,-

-17%

Hovedbilde Traxxas 7736 Bumper Rear X-Maxx

Traxxas 7736 Bumper Rear X-Maxx

This is the Rear Bumper for the Traxxas X-Maxx Monster Truck, FEATURES Molded composite plastic construction INCLUDES Rear Bumper SPECIFICATIONS Length: 7.9" (202mm) Height: 1.6" (41mm)

79,-

Hovedbilde Traxxas 7748 Toe Links Molded Composite 173mm X-Maxx

Traxxas 7748 Toe Links Molded Composite 173mm X-Maxx

This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck FEATURES Molded composite plastic construction with steel ball cups Connects steering assembly to each steering block INCLUDES Left and Right Toe Link SPECIFICATIONS Total Length: 6.8" (173mm) Length between Ball Cup Centers: 6.2" (158mm)

109,-

119,-

-8%

Hovedbilde Traxxas 6533X Micro TQi 5-channel Telemetry TSM ...

Traxxas 6533X Micro TQi 5-channel Telemetry TSM ...

Traxxas 6533X - Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) This is the Traxxas TQi Stability Management Receiver. FEATURES Compatible with Traxxas TQi transmitters equipped with a Multi- Function knob Turned on or off and adjusted via the Multi-Function Knob, or by adjusting the slider in the Traxxas link app Provides greater control on loose dirt, concrete, ice and snow Stabilizes vehicles over rough surfaces as the gyro effect of the spinning front tires continue to "steer" when vehicle is in the air Allows faster cornering speeds Does not restrict throttle Improves braking performance and prevents spinouts Fully conpatible with Traxxas Link Works invisibly in the background to allow driver to maintain connected feel with the vehicle INCLUDES Traxxas TQi Stability Management Receiver REQUIREMENTS Traxxas TQi transmitters with Multi-Function knob Connecting to Traxxas Link App (iOS or Android version) required to update receiver firmware with TSM profile for specific model Traxxas Link Wireless Module may also be required depending on TQi radio to connect to a smartphone via bluetooth

649,-

699,-

-7%

Hovedbilde Traxxas 6966 Latch Mounts/Retainers Clipless

Traxxas 6966 Latch Mounts/Retainers Clipless

Traxxas 6966 - Clipless Latch Mounts Latch mounts/ retainers (front & rear, left & right) Complete set of front and rear latch mounts and retainers for 1/10 scale Slash clipless bodies. Extra-wide retainers keep a firm hold on the body and reduce pull-though damage associated with body clips. Requires 6967 body latch mounts (sold separately). Replacement part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash VXL Slash Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless

89,-

Hovedbilde Traxxas 9494 Input Gear 22T with Shaft Magnum 272R ...

Traxxas 9494 Input Gear 22T with Shaft Magnum 272R ...

Traxxas 9494 Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit, Rustler®, Stampede®, Slash 2WD)

129,-

139,-

-7%

Hovedbilde Traxxas 9492 Idle Gear 30T Magnum 272R Transmission

Traxxas 9492 Idle Gear 30T Magnum 272R Transmission

Traxxas 9492 - Idler gear, 30-tooth/ idler gear shaft (steel)

99,-

119,-

-17%

Hovedbilde Traxxas 6967 Latch Body Mounts (Pair)

Traxxas 6967 Latch Body Mounts (Pair)

Traxxas 6967 Latch, body mounts (front & rear) Front and rear Slash clipless body mounts secure to 6966 clipless latch mounts and retainers (sold separately) for a firm hold on the body. Clipless body mounts require require 6940 body mounts for 2WD Slashes and 6976 and 10125 body mounts and adapters for 4X4 Slashes (both sold separately). Replacement part for these models: Slash® 4X4 Ultimate (Clipless) Slash® 4X4 VXL (Clipless) Slash® VXL (Clipless) Slash® (Clipless) Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless

119,-

Hovedbilde Traxxas 3458 Heat Sink for Velineon 3500 & 540XL

Traxxas 3458 Heat Sink for Velineon 3500 & 540XL

Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

129,-

Hovedbilde Traxxas 2380 Differential Pro-Built Bandit, Rustler, ...

Traxxas 2380 Differential Pro-Built Bandit, Rustler, ...

Traxxas 2380 - Pro-Built 2WD Differential Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

169,-

Hovedbilde Traxxas 8985 Input Gear 22T Transmission Maxx

Traxxas 8985 Input Gear 22T Transmission Maxx

Input gear, transmission, 22-tooth/ 2.5x12mm pin

49,-

Hovedbilde Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

This is a set of Traxxas 6x13x5mm Ball Bearings for use on the E-Revo FEATURES: Stainless Steel bearing construction Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings Part #5180 SPECS: Inside diameter: 6mm (0.24") Outside diameter: 13mm (0.51") Width: 5mm (0.20")

65,-

Hovedbilde Traxxas 4955 Axle Pins T-Maxx (4)

Traxxas 4955 Axle Pins T-Maxx (4)

This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck. These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins Axle pins are steel INCLUDES: Four 2.5x12mm axle pins REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs (4954) over pins.

19,-

Hovedbilde Traxxas 4897X Grub Screws 4mm (6)

Traxxas 4897X Grub Screws 4mm (6)

This is a package of 6 Threadlocked Grubs (4mm) from Traxxas. FEATURES Threadlocking compound pre-applied. Hardened steel construction. Designed for use with Traxxas R/C kits. Hexagon socket drive insert. INCLUDES Six 4mm Grubs

49,-

Hovedbilde Traxxas 5106A Ball Bearing Black Rubber Sealed ...

Traxxas 5106A Ball Bearing Black Rubber Sealed ...

These are the 5106A 15 x 24 x 5mm Ball Bearingsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the outer bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

-9%

Hovedbilde Traxxas 8986 Input Shaft Transmission Maxx

Traxxas 8986 Input Shaft Transmission Maxx

Input shaft, transmission

39,-

Hovedbilde Traxxas 6492X Pinion Gear 25T 1.0M for 5mm Shaft (Only ...

Traxxas 6492X Pinion Gear 25T 1.0M for 5mm Shaft (Only ...

Traxxas 6492X Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

89,-

99,-

-10%