Hopp til innhold

Traxxas 8683 Output Gears Hardened Steel for Diff (2)

Art.nr: TRX 8683

305,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Output gears, differential, hardened steel (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

These are the Rubber Tires and Wheels for the          Wheelie Bar for all Traxxas vehicles. FEATURES: Tires constructed of rubber, black in color with with "TRAXXAS"             written in white on the sidewalls           Aluminum wheels, anodized red in color INCLUDES: Two Rubber Tires Trx 5185  four 5x8mm Ball Bearings, four Axles and             two Wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

På lager 2
KJØP
-8%
Traxxas 5475 Multi Tool 4-Way

35,-

På lager 1
KJØP
Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

179,-

På lager 1
KJØP
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

På lager 6
KJØP
Front Bumper Mount for the Traxxas Revo Quick Notes: – replaces Traxxas stock #5335 – Revo Front Bumper also available Description RPM customers already know our bumpers are some of the toughest in the R/C industry, but a tough bumper needs proper support. That support has arrived in the form of RPM bumper mounts for the Traxxas Revo. These new bumper mounts are designed to absorb serious impacts while transferring minimal impact energy into the more fragile components of the truck. RPM engineers reviewed the stock bumper mounts and found that there were several areas that could be improved. Both the front and rear RPM bumper mounts were widened (the front more so than the rear) to allow the bumper mount material more flexing room. We also curved the center connecting rib to allow the bulkhead mounting points the ability to rotate at the mounting screws, allowing more impact absorption and less energy transference. Our last major design improvement is the one everyone is most familiar with – RPM custom-blended nylon! Our material is the toughest stuff out there with just the perfect blend of rigidity, flexibility, durability and memory. When quality counts and protection is needed most, RPM is the company to turn to for the ultimate in American designed and American made aftermarket R/C products! Tech Notes: RPM Front Bumper Mounts replace Traxxas stock #5335 (RPM bumpers sold separately).    

85,-

På lager 2
KJØP
This is the Upper & Lower Steering Arm (Incorporates the servo saver)                        for the REVO from Traxxas. FEATURES: Steel & black nylon construction INCLUDES: Steering arm w/incorporated servo saver, servo saver spring, &             pin. REQUIRES: TRX 2587   2587 Cap Head Screw 3X10mm                   TRX 2582   2582 Button Head Screw 3X30mm                   TRX 5116   5116 Ball Bearings

89,-

På lager 1
KJØP
Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only)

59,-

På lager 1
KJØP
Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTW

69,-

På lager 5
KJØP
This is the Rear Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

49,-

59,-

På lager 2
KJØP
-17%
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

På lager 4
KJØP
Dette produktet erstatter TRX 6882.   This is the Differential Gear Set for use on the Traxxas Slash 4x4, and XO-1 FEATURES: Steel construction INCLUDES: Two Output Gears           Two Spider Gears           One Spider Gear Shaft REQUIRES: Diassembly of differential

189,-

På lager 3
KJØP
This is the Diff Carrier/Gasket Set for the Traxxas Revo. FEATURES: Plastic Diff Carrier           Blue Rubber Shaft Gaskets           Black Rubber Diff Carrier Gaskets           Gray Teflon Washer INCLUDES: One Diff Carrier           Two Blue Rubber Shaft Gaskets           One Black Rubber Diff Carrier Gaskets           One Gray Teflon Washer REQUIRES: Assembly to vehicle

59,-

69,-

På lager 3
KJØP
-14%
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

På lager 9
KJØP
-9%
This is the Traxxas Power Cell 11.1V 4000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 4000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (100A)  Max Burst Rate: 50C (200A)  Watt Hours: 44.40  Charge Rate: 1C (4A)  Dimensions: 5.3 x 1.02 x 1.7" (135 x 26 x 43mm)  Weight: 11.1oz (316g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children  

929,-

999,-

På lager 5
KJØP
-7%
This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 1400mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S2P  Continuous Discharge: 25C (35A)  Max Burst Rate: 50C (70A)  Watt Hours: 15.54  Charge Rate: 1C (1.4A)  Max Charge Rate: 2C (2.8A)  Dimensions: 3.5 x 0.83 x 1.2" (89 x 21 x 30mm)  Weight: 4.2oz (118g)

469,-

489,-

På lager 4
KJØP
-4%
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)

549,-

På lager 1
KJØP
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)

549,-

På lager 1
KJØP
Body, Rustler 4X4 VXL, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

639,-

699,-

På lager 1
KJØP
-9%
Body Clips Standard Black (12)

29,-

39,-

På lager 5
KJØP
-26%
This is a set of 6x30 to 17mm Hex Adapters. Do you want to upgrade your Raid 6x30 2.8” Removable Hex Wheels to 17mm Hex size? You came to the right place! This pack contains a full car set of 17mm Hexes for your 6x30 2.8” wheels that will fit your 17mm hex conversion trucks and the PRO-MT 4x4 / PRO-Fusion SC 4x4. These hexes are made from High-strength, Durable DuPont Black Nylon Material and are built to take a beating.   Upgrade your 6x30 2.8” Removable Hex Wheels to 17mm Hex Fits any of Pro-Line’s 6x30 Removable Hex Wheels Built to Take a Beating Made from High-strength, Durable DuPont Nylon Material Fits any of Pro-Line's 6x30 Removable Hex Wheels 17mm hex offset for PRO-MT 4x4, PRO-Fusion & Trucks with 17mm Conversions   '

129,-

** Ikke på lager
KJØP
This is the Differential Ring and Pinion Gear for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: One Diff Ring Gear           One Pinion Gear REQUIRES: Installation on the vehicle

149,-

På lager 3
KJØP
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Ikke på lager
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

På lager 5
KJØP
Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction           Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS:    Inner Diameter: 10mm           Outer Diameter: 15mm           Side Thickness:  4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed).   Tamiya  630    3X6X2.5mm Tamiya  730    3X7X3mm Tamiya  840    4X8X3mm Tamiya  850    5X8X2.5mm Tamiya 1050    5X10X4mm Tamiya 1060    6X10X3mm Tamiya 1150    5X11X4mm Tamiya 1260    6X12X4mm Tamiya 1280    8X12X3.5mm Tamiya 1480    8x14x4mm ??? Tamiya 1510    10X15X4mm Tamiya 1680    8X16X5mm

89,-

99,-

På lager 3
KJØP
-10%
These are the replacement Differential Bearings for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Construction           Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle SPECS:    Inner Diameter:  8mm (0.31")           Outer Diameter: 16mm (0.62")           Thickness:       5mm (0.19")

79,-

På lager 3
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png