Hopp til innhold

Traxxas 8613 Body support/ 3x12mm CS (4)

Art.nr: TRX 8613

95,-

Traxxas

Traxxas

På lager: 5

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Body support/ 3x12mm CS (4)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Purple paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

29,-

På lager 9
KJØP
  This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Green paint REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

På lager 3
KJØP
This is the replacement Center Wing Mount for the optional Traxxas                    Revo series wing mount set - TRX 5411  FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged center wing mount INCLUDES: One Center Wing Mount           Two Beveled Nylon Wing Washers

59,-

På lager 3
KJØP
This is the Front and Rear Skid Plates for the Traxxas Revo. FEATURES: Black plastic construction           Front skid plate is a two-piece design           Rear skid plate is a one-piece design INCLUDES: Front and read skid plates          Part #5337           (8) 3X10mm button head screws       Part #2577           (1) 3X30mm button head screws       Part #2582 REQUIRES: Installation on the Traxxas Revo

99,-

På lager 3
KJØP
This is the Black Wing for the Traxxas Revo.                  This part attaches to the rear of the body. FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS:    Length: 8" (203.2mm)           Width: 3" (76.2mm)

189,-

På lager 3
KJØP
 This is a 4x10mm Button Head Screw Set for the Traxxas Revo vehicle. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  16mm (.63")           Threaded Length: 10mm (.39")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the Electronics Box.

35,-

På lager 1
KJØP
            These are the replacement Steering Servo Guards for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Nylon Construction           Black in Color INCLUDES: One Left Black Nylon Steering Servo Guard           One Right Black Nylon Steering Servo Guard REQUIRES: Assembly onto Vehicle

49,-

Ikke på lager
Ikke på lager
  RPM Front Right Arms for the Summit, Revo 3.3 & E-Revo (old) - Blue Replaces stock Traxxas #5331 Quick Notes: Fits Traxxas Summit, Revo & E-Revo Replaces stock Traxxas #5331 Matching Front Left A-arms are also available Matching True-Track Rear End Conversion Kits are available (for the Revo & E-Revo) RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Features: Nearly identical in weight to stock A-Arms. Redesigned for incredible durability under the toughest of conditions. More wear resistant than any other material available. Excess A-arm end-play has been eliminated for more accurate caster and toe angle settings. Angled leading and trailing edges eliminate dirt build-up. No low-hanging cross-braces or shock mounting areas providing better ground clearance. Massive shock rod mounting areas for improved rigidity. Available in black & blue. Less than half the price of aluminum A-arms. Molded from our bulletproof blend of nylons and backed by our world renowned breakage warranty. Sold in sets of one upper and one lower A-arm.

209,-

På lager 2
KJØP
RPM Extended* Right Rear A-arms for the Traxxas Summit, Revo & E-Revo - Blue Quick Notes: Replaces Traxxas stock #5327, #5333R & #8633 Stock replacement arms for the Summit & Revo 2.0 Extended replacement arms for the Revo & e-Revo We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you speak, RPM listens. As a result of your requests, our extended rear A-arms for the Traxxas Summit and Revo are now available. RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra-lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5327, #5333R & #8633. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via “Downloads” for technical information regarding the installation of these a-arms.

149,-

På lager 2
KJØP
  Skidplate Transmission Black

119,-

139,-

På lager 1
KJØP
-14%
Body support, rear/ 3x15mm CS (2) / 3x15mm flat-head machine (2) (fits X-Maxx®)

179,-

På lager 7
KJØP
RPM Extended* Left Rear A-arms for the Summit, Revo & E-Revo - Blue Quick Notes: Replaces Traxxas stock #5328, #5333R & 8634 Stock replacement arms for the Summit & E-Revo 2.0 Extended replacement arms for the Revo & E-Revo We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you speak, RPM listens. As a result of your requests, our extended rear A-arms for the Traxxas Summit and Revo are now available. RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra-lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. All RPM molded products are backed by our limited lifetime warranty against breakage and are molded in black or blue. For unmatched performance, reliability you can trust, and unmatched durability, you can’t go wrong with a set of RPM A-arms installed on your ride! Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5328, #5333R & #8634. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via “Downloads” for technical information regarding the installation of these a-arms.

149,-

På lager 1
KJØP
RPM Front Left A-arms for E-Revo 2.0 - Black Replaces stock Traxxas #8632 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8632 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81512 & #81515 replace stock Traxxas #8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

229,-

På lager 2
KJØP
Traxxas 92056-4-BLK - TRX4 Chevrolet@ K10 High Trail Edition RTR - Blue Lifted Off-Road Adventure Traxxas elevates scale adventure with the lifted TRX-4® Chevrolet® K10 High Trail Edition. Thanks to its factory-installed Long Arm Lift Kit and oversize tires, the highly detailed K10 replica body stands over an inch taller than our standard TRX-4. The K10’s extended wheelbase further enhances the TRX-4’s already legendary off-road capability for even more fun on the trail. The TRX-4 High Trail Edition is the perfect vehicle for the driver who wants it all: extreme all-terrain capability, stunning scale looks, and Traxxas-Tough™ durability. High Trail Edition The factory-installed Long Arm Lift Kit raises K10 High Trail™ Edition over an inch taller for superior ground clearance. Large 2.2” mag wheels and Canyon Trail tires tame even the most technical trails to extend your scale adventures farther than ever before Extended 336mm Wheelbase K10’s steel frame rails extend the wheelbase out to 336mm to capture the pickup’s real-world proportions perfectly. A longer wheelbase also translates into greater climbing stability and a smoother, more stable ride over rough terrain. Clipless Body Mounting K10’s clipless body holds tight on the trail but releases in just seconds to access the chassis. This hidden latching system adds a new level of convenience and scale realism to the TRX-4 by removing traditional body clips which can interrupt the body’s clean lines. Specifications: Length: 563mm Front Track: 270mm Rear Track: 270mm Center Ground Clearance: 99mm Weight (w/o battery): 3.35kg Height (overall): 277mm Wheelbase: 336mm (13.23 inches) Approach Angle: 70° Departure Angle: 52° Breakover Angle: 67° Front Shock Length: 110mm Rear Shock Length: 110mm Front Wheels: 2.2 x 1.34 inches (56 x 34mm) Rear Wheels: 2.2 x 1.34 inches (56 x 34mm) Front Tires: 5.3 x 2.14 inches (135 x 54mm) Rear Tires: 5.3 x 2.14 inches (135 x 54mm) Hex Size: 12mm Speed Control: XL-5 HV Motor (electric): 21T Reverse Rotation Transmission: 2-speed Hi-Lo, Remote Shifting Gear Pitch: 32P Differential Type: 4 Gear, Remote Locking Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic “Hill Hold” Drive System: Shaft Driven 4WD Steering: Chassis Mounted Servo Servo: 2075X Metal Gear Transmitter: TQi™ 2.4 GHz 4-Channel Transmitter Receiver: 6533 Skill Level: 1 Battery Tray: L158.75 x W47 x H23/26mm What’s In The Box: TRX-4, Ready-To-Race® model XL-5 HV waterproof electronic speed control Titan® 21T reverse rotation motor TQi™ 2.4GHz radio system with cruise control High quality maintenance tools What You’ll Need: Batteries: TRX-4 accepts a wide variety of NiMH (4–7 cell) and LiPo (2s–3s) batteries Charger: Traxxas EZ-Peak® Live charger is recommended for easy and fast charging performance (model #2971) AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

7.995,-

8.495,-

På lager 1
KJØP
-6%
NB!! Passer ikke til Mamba X må tilpasses.   This is the Mamba ESC Mounting Plate from Traxxas. FEATURES: Nylon construction           Black in color INCLUDES: One ESC Mounting Plate           Two 3x35mm Cap Head Screws           Foam Padding REQUIRES: Use with Castle Creations Mamba ESC

39,-

På lager 1
KJØP
LiPo Low Voltage Buzzer Også kjent som LiPo Alarm.   Overvåker spenningen i batteriet og gir alarmsignal når volten blir for lav.

85,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Body posts, clipless, front & rear (1 each)

59,-

På lager 2
KJØP
Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers (4)

119,-

På lager 1
KJØP
These are the replacement Differential Bearings for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Construction           Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle SPECS:    Inner Diameter:  8mm (0.31")           Outer Diameter: 16mm (0.62")           Thickness:       5mm (0.19")

79,-

På lager 3
KJØP
Floor pans, left & right

99,-

** Ikke på lager
KJØP
This is the 54T Spur Gear for the Traxxas X-Maxx Monster Truck. FEATURES Hardened steel construction INCLUDES 54T Spur Gear SPECIFICATIONS Number of Teeth: 54 Pitch: 1.0 metric Pressure Angle: 20°

219,-

** Ikke på lager
KJØP
Available in large 50ml and extra large 100ml bottles with convenient flip cap.  HUDY Ultimate Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY. Each batch of ultimate oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven cSt rating, the new line of oils will be easy to identify, adjust, and feel. HUDY oils cover the complete range from Ultra Thin (100cSt)... Thin (1000 cSt)... Medium (5000cSt)... Thick (10.000cST)... up to Extra Thick (1.000.000cSt), with numerous stages in between. Thinner oils are suitable for shocks (up to Medium), and thicker oils are suitable for differentials. With the available range, you will be able to find the correct viscosity you need for your application. Each category of oils is individually color-coded to allow you to instantly recognize the type of viscosity.   

169,-

** Ikke på lager
KJØP
These are the Front and Rear Red Aluminum Bulkhead Tie Bars for the 1/10 scale Traxxas Revo. FEATURES Red anodized aluminum Flat tie bar installs at rear INCLUDES One front & one rear Tie Bar w/one 3x10mm button head screw

99,-

På lager 2
KJØP
These are the 5107A 17 x 26 x 5mm Ball Bearings  for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber seals  Used in the front and rear differentials of the X-Maxx   INCLUDES Two 17 x 26 x 5mm Black Rubber Sealed Ball Bearings   SPECIFICATIONS  Inner Diameter: 17mm  Outer Diameter: 26mm  Thickness: 5mm

109,-

119,-

På lager 3
KJØP
-8%
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png