Traxxas

Traxxas 8614 Body posts, clipless, front & rear (1 each)

Art.nr: TRX 8614

59,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Body posts, clipless, front & rear (1 each)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde Traxxas 8611R Body E-Revo Black

Traxxas 8611R Body E-Revo Black

Art.nr: TRX 8611R

Copied

Body E-Revo Black Body, E-Revo, black/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/10, 1/8 Painted: Yes

949,-

999,-

-5%

Hovedbilde Traxxas 8611T Body E-Revo 2 Purple

Traxxas 8611T Body E-Revo 2 Purple

Art.nr: TRX 8611T

Copied

Body, E-Revo®, orange/purple, window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

949,-

999,-

-5%

Hovedbilde Traxxas 8611X E-Revo 2.0 Blå Body

Traxxas 8611X E-Revo 2.0 Blå Body

Art.nr: TRX 8611X

Copied

Body, E-Revo, blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

949,-

999,-

-5%

Hovedbilde Traxxas 8612 E-Revo 2.0 Solar Flare Body

Traxxas 8612 E-Revo 2.0 Solar Flare Body

Art.nr: TRX 8612

Copied

E-Revo 2.0 Solar Flare Body Body, E-Revo®, Solar Flare (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting) Is it time to upgrade your E-Revo with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with pre-installed front and rear body mounts and roof skid.

895,-

1.095,-

-18%

Kunder kjøpte også

Hovedbilde DynoMAX 9703 Charge Lead T-Plug with 4mm banana plugs

DynoMAX 9703 Charge Lead T-Plug with 4mm banana plugs

Charge Lead T-Plug with 4mm banana plugs

99,-

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde Tamiya 81516 Acrylic Mini X-16 Purple 1/3 oz

Tamiya 81516 Acrylic Mini X-16 Purple 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Purple paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

29,-

Hovedbilde Tamiya 81505 Acrylic Mini X-5 Green 1/3 oz

Tamiya 81505 Acrylic Mini X-5 Green 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Green paint REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-

Hovedbilde Traxxas 8958 Rod End w/ Pivot Balls (4) Maxx

Traxxas 8958 Rod End w/ Pivot Balls (4) Maxx

Traxxas 8958 Rod End w/ Pivot Balls (4) Maxx

69,-

Hovedbilde Traxxas 7884 LED Light Bar Front Maxx, X-Maxx

Traxxas 7884 LED Light Bar Front Maxx, X-Maxx

LED light bar, front (high-voltage) (40 white LEDs (double row), 82mm wide) Fits: X-Maxx® or Maxx®)

249,-

Hovedbilde Traxxas 8935X Bumper Front (use with LED Lights #8990) ...

Traxxas 8935X Bumper Front (use with LED Lights #8990) ...

Bumper, front (for use with #8990 LED light kit)

69,-

Hovedbilde Traxxas 8920 Bulkhead Front Upper & Lower Maxx

Traxxas 8920 Bulkhead Front Upper & Lower Maxx

Bulkhead Front Upper & Lower Maxx

149,-

Hovedbilde Power HD LW-15MG Waterproof Servo 15kg/0.11s

Hovedbilde Power HD LW-15MG Waterproof Servo 15kg/0.11s

Power HD LW-15MG Waterproof Servo 15kg/0.11s

Power HD servo perfekt til deg som ønsker å oppgradere fra din orginalservo. Flott og motstandsdyktig utførelse i aluminiums-hus med gir i kobber og aluminium. Servoen er vannbestandig og div servohorn og skruer medfølger. Flott servo til 1/10 offroadbiler. Spesifikasjoner: Kraft 4.8V: 10kg/cm Hastighet 4.8V: 0.15s Kraft 6.0V: 12.5kg/cm Hastighet 6.0V: 0.13s Kraft 7.2V: 15kg/cm Hastighet 7.2V: 0.11s Vekt: 62g Gir: Kobber & Alu Størrelse: 40.5x 20.5 x 39.3mm Servohorn 25T

449,-

499,-

-10%

Hovedbilde Traxxas 3628 Reciever Box Stampede/Rustler/Bandit

Traxxas 3628 Reciever Box Stampede/Rustler/Bandit

This is the Receiver Box for use on the Traxxas Stampede, Rustler, and Bandit Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One Receiver Box One Rubber Seal Foam Padding Two 2.5x8mm Cap Head Screws Two 3x10mm Cap Head Screws Two 2.5x10mm Cap Head Screws One Tube of Grease Instruction sheet REQUIRES: Installation on the vehicle SPECS: Length: 78mm (3.07") Width: 35mm (1.4") Height: 33mm (1.3")

145,-

Hovedbilde WL-144010.2159 2.5x47.5PM D6 Screw Set

WL-144010.2159 2.5x47.5PM D6 Screw Set

WL-144010.2159 2.5x47.5PM D6 Screw Set 4pcs

39,-

Hovedbilde Yeah Racing YB6047B/S10 RC PTFE Bearing 7x14x5mm10pcs

Yeah Racing YB6047B/S10 RC PTFE Bearing 7x14x5mm10pcs

Yeah Racing RC PTFE Bearing 7x14x5mm10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing RC PTFE Bearing (5x10x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

Hovedbilde Traxxas 8612 E-Revo 2.0 Solar Flare Body

Traxxas 8612 E-Revo 2.0 Solar Flare Body

E-Revo 2.0 Solar Flare Body Body, E-Revo®, Solar Flare (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting) Is it time to upgrade your E-Revo with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with pre-installed front and rear body mounts and roof skid.

895,-

1.095,-

-18%

Hovedbilde Traxxas 2575 Button Head Machine Screw 3x6mm Revo (6)

Traxxas 2575 Button Head Machine Screw 3x6mm Revo (6)

This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 6mm Diameter: 3mm

35,-

Hovedbilde Traxxas 5348 Toe Link Rod Ends Revo (4)

Traxxas 5348 Toe Link Rod Ends Revo (4)

This is a set of Rod Ends for the Traxxas Revo. They are to be used on the Rear Toe-Link Rods only. FEATURES: Plastic construction Black in color INCLUDES: Four Rear Toe-Link Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 23mm (.91") Width at ball joint: 11mm (.43") COMMENTS: Ring on the rod end shaft denotes for Rear Toe Links only. If Pivot Balls are needed, use TRX 5355 or 5355X

25,-

Hovedbilde Traxxas 5338 Toe Link 5.0mm Steel Revo (2)

Traxxas 5338 Toe Link 5.0mm Steel Revo (2)

This is a pair of replacement Toe Links for the Traxxas Revo Truck. These adjust the position of the toe on the vehicle. FEATURES: Steel turnbuckle design 5.0mm diameter INCLUDES: Two front or rear toe links REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 5.1" (129mm)

125,-

Hovedbilde Traxxas 5451R Steel Drive Shaft Revo/T-Maxx ...

Hovedbilde Traxxas 5451R Steel Drive Shaft Revo/T-Maxx ...

Traxxas 5451R Steel Drive Shaft Revo/T-Maxx ...

This is a set of Steel Driveshafts for the Traxxas Revo/Maxx. FEATURES: Steel construction Can be used to replace a bent or damaged front center driveshaft Assembled with inner & outer dust boots INCLUDES: Four steel constant-velocity driveshafts SPECS: Length: 7" (177.8mm) between canter of ball ends Diameter: .19" (5mm) Reservedeler: Traxxas 5129 Driveshaft Assembly Rebuild Kit Revo/T-Maxx Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2) Traxxas 5153R Drive Cups Inner Revo (2) Traxxas 5154 Drive Shaft Steel Constant Velocity Revo/T-Maxx Traxxas 5166 Stub Axle/Axle Sleeve Revo/T-Maxx

899,-

949,-

-5%

Hovedbilde Traxxas 5353X 17mm Splined Wheel Nuts Anodized Blue ...

Traxxas 5353X 17mm Splined Wheel Nuts Anodized Blue ...

These are the optional 17mm Splined Wheel Hubs for the E-revo 1/10 and E-max 1/10 with brushmotor. FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel hubs and nuts REQUIRES: Installation on the vehicle

289,-

299,-

-3%

Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC

Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC

Traxxas 3340 Cooling fan, Velineon VXL-3s ESC

The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.

299,-

329,-

-9%

Hovedbilde Traxxas 5650R Driveshafts Center E-Revo Front/Rear ...

Hovedbilde Traxxas 5650R Driveshafts Center E-Revo Front/Rear ...

Traxxas 5650R Driveshafts Center E-Revo Front/Rear ...

These are the optional Center Driveshafts for use on the Traxxas E-Revo. FEATURES: Steel construction Constant-velocity Inner and outer dust boots INCLUDES: One Rear Center Driveshaft One Front Center Driveshaft REQUIRES: Installation on the vehicle

549,-

599,-

-8%

Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...

Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...

This is the replacement Pivot Ball and Dust Cap Boot Set for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots Four Black Dust Boot Retainer Four Blue Notched Dust Boot Retainer Four Blue Rubber Boot Plugs Four nylon Pivot Ball Retainers Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

-10%

Hovedbilde Traxxas 5677R Gear Cover Single Motor E-Revo

Traxxas 5677R Gear Cover Single Motor E-Revo

Denne erstatter TRX 5677RX This is the optional Single Motor Gear Cover for the Traxxas E-Revo FEATURES: Plastic construction Black in color INCLUDES: One Single Motor Gear Cover REQUIRES: Installation on the Traxxas E-Revo COMMENTS: For the double motor gear cover, order TRX 5677

45,-

Hovedbilde Fuse 49900 Traxxas Plug - Batteryside

Fuse 49900 Traxxas Plug - Batteryside

Traxxas Plug - Batteryside

29,-

Hovedbilde Traxxas 5469 Rod Ends GTR Shocks Revo (6)

Traxxas 5469 Rod Ends GTR Shocks Revo (6)

This is a Rod End Set for the Traxxas Revo used with the optional GTR shocks. FEATURES: Plastic construction Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 18.35mm (0.72") Width at ball joint: 10.35mm (0.40") COMMENTS: If Pivot Balls are needed, use TRX 5355.

25,-

Hovedbilde M-Drive Universal Tool - Nut Driver 5.5/7/8mm - ...

Hovedbilde M-Drive Universal Tool - Nut Driver 5.5/7/8mm - ...

M-Drive Universal Tool - Nut Driver 5.5/7/8mm - ...

M-Drive Universal Tool for 5.5/7/8mm Nuts & 3/4/5mm Turnbuckles This is very handy universal tool for M3, M4 & M5 nuts when you cant reach them with a normal hex tool. It's also made for adjusting turnbuckles (3/4/5mm). Specs: Made of steel Laser M-Drive and size symbols Length: 103mm Width: 22mm Thickness: 2mm

59,-