Hopp til innhold

Traxxas 7775 Wheels (2) (for #7776 wheelie bar)

Art.nr: TRX 7775

59,-

Traxxas

Traxxas

På lager: 3

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Wheels (2) (for #7776 wheelie bar)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 7775X
Copied
Traxxas 7775X Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws (2). (Fits 7776, 8976, and 9576 wheelie bars). Accessory part for these models: Maxx® Sledge® X-Maxx® XRT™

439,-

499,-

På lager 1
KJØP
-12%
Art.nr: TRX 7775A
Copied
Traxxas 7775A Wheels, wheelie bar, 6061-T6 aluminum (dark titanium-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws (2). (Fits 7776, 8976, and 9576 wheelie bars). Accessory part for these models: Maxx® Sledge® X-Maxx® XRT™

439,-

499,-

På lager 1
KJØP
-12%
Art.nr: TRX 7775T
Copied
Traxxas 7775T Wheels, wheelie bar, 6061-T6 aluminum (orange-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws (2). (Fits 7776, 8976, and 9576 wheelie bars). Accessory part for these models: Maxx® Sledge® X-Maxx® XRT™

439,-

499,-

På lager 2
KJØP
-12%
Art.nr: TRX 7775G
Copied
Traxxas 7775G Wheels, wheelie bar, 6061-T6 aluminum (green-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws (2). (Fits 7776, 8976, and 9576 wheelie bars). Accessory part for these models: Maxx® Sledge® X-Maxx® XRT™

439,-

499,-

På lager 1
KJØP
-12%
Art.nr: TRX 7775R
Copied
Traxxas 7775R Wheels, wheelie bar, 6061-T6 aluminum (red-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws (2). (Fits 7776, 8976, and 9576 wheelie bars). Accessory part for these models: Maxx® Sledge® X-Maxx® XRT™

439,-

499,-

På lager 1
KJØP
-12%

Kunder kjøpte også

Bushings Drivshaft F&R (1+1) XRT Bushings, driveshaft, front (1), rear (1) Front and rear driveshaft bushings

39,-

49,-

På lager 2
KJØP
-20%
Wing Black XRT Wing/ 4x12mm FCS (4) Black XRT™ wing with 4x12 mm screws (4)

189,-

209,-

På lager 2
KJØP
-10%
Bulkhead tie bar, upper (1)/ lower (2) (steel)

119,-

129,-

På lager 3
KJØP
-8%
Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

79,-

Kontakt oss for mer informasjon om dette produktet
Disse lagerene er samme størrelse som Tamiya 1510 Ball bearings, black rubber sealed (10x15x4mm) (2)

89,-

På lager 4
KJØP
These are the 5106A 15 x 24 x 5mm Ball Bearingsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the outer bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

På lager 3
KJØP
-9%
   This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES: 4 snap-in adjustment positions to control degree of wheelie action             easily removable if additional control isn't needed           Constructed of hardened plastic, black in color INCLUDES: Wheelie Bar Arm with four Shoulder Screws REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only.          

119,-

129,-

Ikke på lager
Ikke på lager
-8%
Traxxas X-Maxx Heavy-Duty Roof Skid - Green Skid plate, roof (body) (green)/ 3x15mm CS (4) (requires #7713X to mount) Just like our heavy-duty suspension arms, new X-Maxx roof skid plates use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these parts are built with just the right amount of flex to resist breakage--even in cold weather! These important accessories protect the roof during rollovers.

129,-

På lager 1
KJØP
RC PTFE Bearing (15x24x5mm) 10pcs FEATURE: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision SPECIFICATION: Yeah Racing (#YB6039BS/10) RC Telfon Bearing (15x24x5mm) Material: Metal INCLUDE: Bearing (10Pcs) * Photo for Reference Only TIPS ON CLEANING & LUBRICATING BALL BEARINGS (RC BEARING TIPS) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

** Ikke på lager
KJØP
RPM Replacement Bearings for RPM X-Maxx Oversized Axle Carriers Not Compatable with 7752 Quick Notes: They are NOT compatible with stock Traxxas axle carriers This is a set of replacement bearings for RPM #81732 Oversized Axle Carriers for the Traxxas X-Maxx. These bearings are not replacement bearings for stock Traxxas Axle Carriers (#7752). Tech Notes: RPM replacement bearings are 20x32x7mm in size and only fit RPM #81732 Oversized Axle Carriers. Not compatible with stock Traxxas axle carriers.

169,-

På lager 2
KJØP
RPM Shock Shaft Guards for X-Maxx - Green Fits stock Traxxas X-Maxx GTX shocks Quick Notes: Over 100° of frontal protection Zero friction protection devices Increased spring cup spring support Fits stock Traxxas X-Maxx GTX shocks Sold in pairs Rocks, dirt and debris striking your shock shafts lead to dents, dings and burrs, which, in turn, lead to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between seal replacement and shock rebuilds. RPM Shock Shaft Guards are a simple design, replacing stock shock spring cups with ones that have mounting holes for a thin but tough shield that rises up to the base of the shock body. The guard completely blocks debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The front shield of the guard covers over 100° of frontal exposure! That means rocks thrown from the front tires (or from that guy you’re trying to pass) won’t ever hit your shock shafts. RPM Shock Shaft Guards are zero friction protection devices, meaning our guards never touch the working elements of the shocks. As an added bonus, we increased the length of the tubular spring support of the spring cup by nearly 2mm (5/64”). The added length helps prevent the spring from jumping off of the spring perch when the conditions are less than ideal. RPM Shock Shaft Guards are sold in pairs and are stock replacement items. Tech Notes: RPM Shock Shaft Guards fit stock Traxxas X-Maxx GTX shocks (Traxxas #7761, #7761A, #7761G & #7761R) only. They have not been tested nor guaranteed to fit any other shocks for the X-Maxx. RPM Shock Shaft Guards replace Traxxas #7764 (spring cups only). Two packages will be needed to complete one vehicle.

155,-

** Ikke på lager
KJØP
RPM Threaded Hinge Pins for X-Maxx Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Quick Notes: Manufactured from stainless steel Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Can be used in place of CEN #GS025* Works in the outer, lower a-arm hinge pin location only In response to customer demand, we’re proud to release a set of threaded hinge pins for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back! Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer, lower A-arm hinge pin location only. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).

129,-

139,-

På lager 1
KJØP
-7%
Traxxas 7829G - HD Suspension arm Green, upper (right or left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

119,-

På lager 2
KJØP
Traxxas 7831G - HD Suspension arm Green, lower (left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

På lager 3
KJØP
Traxxas 7830G - HD Suspension arm Green, lower (right, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

På lager 3
KJØP
Insert, threaded steel (replacement inserts for #7748X TUBES) (includes (1) left and (1) right threaded insert)

95,-

På lager 1
KJØP
Toe links, X-Maxx (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

629,-

På lager 2
KJØP
Wheel hubs, hex, aluminum (green-anodized) (4)

235,-

På lager 3
KJØP
X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

149,-

På lager 2
KJØP
X-Maxx steel constant-velocity driveshaft for 8s-spec heavy duty drivetrain. 6s truck upgrade also requires #7751X, #7754X, and #7768 or #7768R to complete installation. Numer in package: 1

199,-

På lager 6
KJØP
This is a Roll of 40mm Masking Tape from Tamiya. FEATURES This is a thin, self-adhesive paper tape, developed for model  applications.  Yellow in color.  Flexible.  Easily applied to curved surfaces making it ideal for masking off  areas for painting, etc. INCLUDES One Roll Of Masking Tape SPECIFICATIONS  Width: 40mm

65,-

** Ikke på lager
KJØP
This is the Rear Bumper for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   SPECIFICATIONS  Length: 7.9" (202mm)  Height: 1.6" (41mm)

79,-

På lager 3
KJØP
This is a 6 Meter Roll of 6mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 6m           Width:  6mm

49,-

** Ikke på lager
KJØP
Tires & wheels, assembled, glued (X-Maxx black wheels, Maxx AT tires, foam inserts) (left & right) (2). 8s Rated tires which doesn´t expand as much when going full speed with the X-Maxx 8s FEATURES Tires glued to wheels, ready to install Tires molded from rubber with aggressive all-terrain tread Molded plastic wheels, matte black in color INCLUDES Wheels Tires Foam Inserts SPECIFICATIONS Width: 4" (102mm) Diameter: 8" (203mm) Hex Size: 24mm

849,-

** Ikke på lager
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png