Hopp til innhold

Traxxas 7727 Bulkhead rear upper

Art.nr: TRX 7727

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Bulkhead rear upper

Produsent

"Utgått"

Relaterte produkter

 

Art.nr: TRX 7727R
Copied
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

KJØP
Art.nr: TRX 7727X
Copied
X-Maxx rear upper and lower bulkhead for use with 8s Torque-Biasing Center Drive™. Replaces #7727 and #7728, and requires (2) #5108 ball bearings to complete installation.

239,-

269,-

Ikke på lager
-11%

Kunder kjøpte også

Traxxas 7743-BLUE - Aluminum Suspension Pin Retainers - Blue Add more color and style to your X-Truck™ with this set of four aluminum suspension pin retainers. The retainers are carefully machined from tough 6061-T6 aluminum and anodized in bright eye-catching colors. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Fits front or rear. Features: Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Fits XRT®, Maxx®, and X-Maxx® and Funco® Pro Scale® Sand Car Accessory part for these models: X-Maxx® XRT® MAXX® Funco® Pro Scale® Sand Car

149,-

159,-

KJØP
-6%
Bulkhead Front Upper XRT and X-maxx Bulkhead, front (upper) Replacement front upper bulkhead

69,-

79,-

KJØP
-13%
Bumper Mount Front Maxx

59,-

KJØP
Springs, shock (natural finish) (GTX) (1.450 rate) (2)

199,-

KJØP
TRX 7733, Traxxas 7733, 7733 This is the Bumper Mount and Front Bumper Support  for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Front Bumper Support

89,-

Driveshaft, steel constant velocity (shaft only, 190.3mm) (1) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

229,-

239,-

KJØP
-4%
Stub axle, aluminum, (orange-anodized) (1) (for use only with #7750X driveshaft) Add a touch of style to your X-Maxx® or XRT™ with this brightly-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft 7750X only.

185,-

KJØP
Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Shock shafts GTX Medium (#7861) (2) Shock shaft, 92mm (GTX) (steel, chrome finish) (2) (assembled with rod ends & hollow balls) Pair of replacement 92 mm steel shock shafts with chrome finish for medium-length GTX™ shocks. Shafts come assembled with rod ends and hollow balls (2).

229,-

249,-

KJØP
-8%
Høykvakitets Silicone demper olje med viskositet 700. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
HPI  101190 - 17MM HEX AND PIN SET (4pcs) TROPHY 4.6 TRUGGY RTR / TROPHY TRUGGY FLUX RTR THIS PART FITS THE FOLLOWING KITS / PARTS: Trophy Truggy 4.6 Trophy Truggy 4.6 Trophy Truggy Flux

109,-

KJØP
Radient 010064 EC5 Pairs (5PCS) MERKE Radient KONTAKT EC5

219,-

KJØP
These are the Front and Rear Tie Bar Mountsfor the Traxxas X-Maxx Monster Truck. FEATURES One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and rear bulkhead assemblies in place INCLUDES Front and Rear Tie Bar Mounts

69,-

KJØP
These are the Front and Rear Skidplates  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction  Reduces damage to underside of chassis and other components during  chassis bottoming   INCLUDES One each;  Front and Rear Skidplate  Two Rubber Mounts

119,-

KJØP
Driveshaft assembly, center, aluminum

159,-

169,-

KJØP
-6%
These are the 5106A 15 x 24 x 5mm Ball Bearingsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the outer bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

KJØP
-9%
Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

109,-

119,-

KJØP
-8%
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

139,-

159,-

KJØP
-13%
This is the Differential Carrier  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction   INCLUDES Differential Carrier  Two X-Ring Gaskets  Two Ring Gear Gaskets

55,-

KJØP
These are the 5107A 17 x 26 x 5mm Ball Bearings  for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber seals  Used in the front and rear differentials of the X-Maxx   INCLUDES Two 17 x 26 x 5mm Black Rubber Sealed Ball Bearings   SPECIFICATIONS  Inner Diameter: 17mm  Outer Diameter: 26mm  Thickness: 5mm

109,-

119,-

KJØP
-8%
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
This is a set of Traxxas 6x13x5mm Ball Bearings                    for use on the E-Revo FEATURES: Stainless Steel bearing construction           Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings  Part #5180 SPECS:    Inside diameter: 6mm (0.24")           Outside diameter: 13mm  (0.51")           Width: 5mm (0.20")

65,-

KJØP
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball cups  Connects steering assembly to each steering block   INCLUDES Left and Right Toe Link   SPECIFICATIONS  Total Length: 6.8" (173mm)  Length between Ball Cup Centers: 6.2" (158mm)

109,-

119,-

KJØP
-8%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png