Traxxas

Traxxas 7148 GTR Shock Spring Black 1/16 VXL (2)

Art.nr: TRX 7148

49,-

Traxxas

Traxxas

På lager: 4

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

These are the optional Black Rate GTR Shock Springs for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES: Steel construction
Red in color
2.22 rate, black

INCLUDES: Two GTR Shock Springs

REQUIRES: Installation on the vehicle

SPECS:    Length: 19.75mm (0.78")
          Outer Diameter: 13.75mm (0.54")
          Inner Diameter: 10.95mm (0.43")
          Wire Diameter: 1.4mm (0.06")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2514 Sponsor Decal Sheet

Traxxas 2514 Sponsor Decal Sheet

This is a Sponsor Decal Set for R/C Cars from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. These are the contingency/sponsorship decals that are used on race cars. Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD, Mr. Gasket, NOS, Accel, Hurst, and more. Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS: Length: 9-1/8" (23.2cm) Width: 5-1/8" (13.0cm)

59,-

Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

This is the Wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction, black in color INCLUDES: One Wing One Decal Set REQUIRES: Installation on the vehicle SPECS: Length: 118mm (4.6") Width: 43mm (1.7") Height: 29mm (1.1")

75,-

Hovedbilde Traxxas 2080R Servo Micro Metal Gear Sealed

Traxxas 2080R Servo Micro Metal Gear Sealed

Traxxas 2080R Servo, micro, waterproof, metal gear The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience. Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Slash® 4X4 1/16 Summit™

579,-

599,-

-3%

Hovedbilde Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 ...

Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 ...

Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 Shore-Narrow (4)

149,-

Hovedbilde Traxxas 2421 21T 48P Pinion Gear

Traxxas 2421 21T 48P Pinion Gear

This is the Traxxas 21T 48P Pinion Gear FEATURES: Made of steel INCLUDES: One pinion gear One setscrew, M3.0x4.0mm SPECS: Teeth: 21 Pitch: 48 Length: 10.5mm Diameter: 12mm Hole diameter: 3.4mm Length of teeth: 6.1mm

39,-

Hovedbilde Traxxas 8794 Foam Insert Set 1/16-1/18 (Fits Car Stand ...

Traxxas 8794 Foam Insert Set 1/16-1/18 (Fits Car Stand ...

Traxxas 8794 Skuminnsatser, universaladapter (stor og liten)/ selvklebende krok- og løkkefester (4) (for #8796 RC bil-/lastebilstativ) Engelsk: Traxxas 8794 Foam inserts, universal adapter (large & small)/ adhesive hook and loop fasteners (4) (for #8796 RC car/truck stand)

69,-

79,-

-13%

Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8

Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8

Traxxas 8796-BLUE Car Stand Alu 1/10-1/8

Traxxas 8796-BLUE - Car and Truck Stand Work Like a Pro with the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addition to your workbench. Made from high-quality aluminum and anodized with a brilliant blue finish, the RC stand is built for years of dependable service. The stand swivels a full 360° on dual ball bearings for smooth, precise action. A handy locking lever secures the stand in one of 16 different positions for maximum stability. Pick up your Traxxas RC stand today and start working like a pro! RC Stand Features: Engineered for the full range of Traxxas 1/10 to 1/8 scale vehicles Use with TRX-4M foam stand (9794) for 1/18 scale models Use with Foam Inserts (8794) for LaTrax 1/18 scale and Traxxas 1/16 Scale models Tough aluminum construction with a brilliant blue finish Dual ball bearings for smooth 360° rotation Locking lever with 16 positions Non-slip foam pads on top and bottom Perfect for maintaining and storing vehicles Prevents flat-spotting of tires Compatible with 1/18 TRX-4M™ The Traxxas RC stand features cutouts for the TRX-4M display stand (9794, sold separately) to securely hold 1/18 scale models for storage and maintenance. Compatible with LaTrax 1/18 Scale and Traxxas 1/16 Scale Models The foam insert set for the Traxxas RC Stand (8794, sold separately) accommodates smaller scale models.

479,-

519,-

-8%

Hovedbilde RPM 73992 Rear Bumper Black 1/16 E-Revo Replaces TRX ...

Hovedbilde RPM 73992 Rear Bumper Black 1/16 E-Revo Replaces TRX ...

RPM 73992 Rear Bumper Black 1/16 E-Revo Replaces TRX ...

RPM Rear Bumper for the 1/16 E-Revo - Black Replaces TRX 7138 Quick Notes: Replaces stock Traxxas #7138 A matching front bumper is also available (RPM73982) At just over 2” wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren’t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4” wide, almost double the width of the stock bumpers! Now that’s some serious protection. We also decided to go with a more scale look with a twin tube bumper design. Both front and rear bumpers have this new design while the front bumper also integrates an upper protective loop, indicative of a scale front bumper while also providing additional body protection on roll-overs. RPM bumpers for the 1/16th scale Mini E-Revo are molded from RPM materials, which means you know they’re tough! We also mold them in three color options – black, blue and red, matching our A-arms presently available for these mean little trucks while blending perfectly with any stock or aftermarket paint scheme.

109,-

Hovedbilde Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 12mm (.63") Threaded Length: 11mm (.45") Thread Size: M4x.7mm coarse Hex Wrench Size 2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Hovedbilde Traxxas 8674 Tires & Wheels Paddel/Carbide Black 3.8

Traxxas 8674 Tires & Wheels Paddel/Carbide Black 3.8" ...

Tires & wheels, assembled, glued (black 3.8' wheels, paddle tires, foam inserts) (2) (TSM rated) Scale: 1/10, 1/8 Size: 3,8 Inch Suit: Truck Drive: 17mm Hex Special: Traxxas TSM-Rated

649,-

699,-

-7%

Hovedbilde Traxxas 5477 Flat Wrench 5mm Blue Revo

Traxxas 5477 Flat Wrench 5mm Blue Revo

This is a Flat, Open-End 5mm Wrench for the Traxxas Revo. FEATURES: Aluminum Construction Blue anodization Etched "Traxxas" and "5mm" logos Drilled hole on one end of easy hanging INCLUDES: One Wrench REQUIRES: Nothing SPECS: Length: 76mm (3.00") Thickness: 3.5mm (.136") Wrench Size: 5mm (.197") COMMENTS: Can be use in most places where a 5mm wrench is required.

49,-

Hovedbilde Yeah Racing YB6008B/S10 RC PTFE Bearing (4x7x2.5mm) ...

Yeah Racing YB6008B/S10 RC PTFE Bearing (4x7x2.5mm) ...

Yeah Racing RC PTFE Bearing (4x7x2.5mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6008BS/10) RC Telfon Bearing (4x7x2.5mm)/li> Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

Hovedbilde Traxxas 5036 Silicon Shock Oil Premium 70WT (900cSt) ...

Hovedbilde Traxxas 5036 Silicon Shock Oil Premium 70WT (900cSt) ...

Traxxas 5036 Silicon Shock Oil Premium 70WT (900cSt) ...

Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

-9%

Hovedbilde M-DRIVE Hex/Allen Wrench Tool - 1.5mm Straight Hex

Hovedbilde M-DRIVE Hex/Allen Wrench Tool - 1.5mm Straight Hex

M-DRIVE Hex/Allen Wrench Tool - 1.5mm Straight Hex

M-DRIVE Hex/Allen Wrench Tool - 1.5mm Straight Hex High quality hex/allen wrench tool with black anodized aluminium handle and tough HSS steel tip. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Hex Size: 1.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: Electric motor pinion M3 crub screws (most 1/10 cars - some larger trucks use a larger M4 screw that needs a 2mm wrench)

69,-

Hovedbilde Traxxas 7046R Spur Gear 50T VXL

Traxxas 7046R Spur Gear 50T VXL

This is the optional 50T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One 50T Spur Gear REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 27.4mm (1.1") Inner Diameter: 5.5mm (0.22")

39,-

Hovedbilde Traxxas 4728 Pinion Gear 48P 28T

Traxxas 4728 Pinion Gear 48P 28T

Passer på Traxxas 1/16 biler også. This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote control sedan. Metal construction INCLUDES: One Pinion Gear One Set Screw SPECS: Teeth: 28 Pitch: 48

39,-

Hovedbilde Traxxas 3215 Back Plate Screws 2.5x6mm (6)

Traxxas 3215 Back Plate Screws 2.5x6mm (6)

This is the stock replacement backplate screw set for the Image .12 Traxxas engine. Features: cap-head aluminum design Includes 6 2.5x6mm cap-head (sockethead) screws

29,-

Hovedbilde Traxxas 2578 Button Head Screws 3x12mm (6)

Traxxas 2578 Button Head Screws 3x12mm (6)

These are 3x12mm Button Head Screws from Traxxas FEATURES: Steel Construction Black in color Hex head INCLUDES: Six button head screws SPECS: Length: 12mm (.47") Diameter: 3mm (.12") COMMENTS: These can be use with various application.

35,-

Hovedbilde Traxxas 7174A Talon Tires On Gemini Wheels 1/16 E-Revo ...

Traxxas 7174A Talon Tires On Gemini Wheels 1/16 E-Revo ...

These are the Traxxas Talon Tires Pre-Mounted on Gemini Black Chrome Wheels. FEATURES: Nylon wheels Gemini 5-spoke design Black chrome in color INCLUDES: Two Pre-assembled Tires and Wheels with Foam Inserts REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 83mm (3.3") Width: 48.3mm (1.9") Hex: 12mm

279,-

Hovedbilde Traxxas 3229 Head Screw 2.5x10mm

Traxxas 3229 Head Screw 2.5x10mm

These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

Hovedbilde Traxxas 7021 Suspension Pin Set Front/Rear VXL

Traxxas 7021 Suspension Pin Set Front/Rear VXL

This is the Suspension Pin Set for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction Silver in color INCLUDES: Two 2x46mm Pins Four 2x14mm Pins REQUIRES: Installation through suspension components

59,-

69,-

-14%

Hovedbilde Traxxas 7145 GTR Shock Spring Orange 1/16 VXL (2)

Traxxas 7145 GTR Shock Spring Orange 1/16 VXL (2)

These are the optional Orange Rate GTR Shock Springs for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Steel construction Red in color 1.76 rate, orange INCLUDES: Two Shock Springs REQUIRES: Installation on the vehicle SPECS: Length: 23mm (0.91") Outer Diameter: 13.5mm (0.53") Inner Diameter: 11mm (0.43") Wire Diameter: 1.3mm (0.05")

49,-

Hovedbilde Traxxas 7045R Spur Gear 45T VXL

Traxxas 7045R Spur Gear 45T VXL

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One 45T Spur Gear REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 24.75mm (0.97") Inner Diameter: 5.5mm (0.22") Width: 7mm (0.28")

39,-

Hovedbilde Tamiya 86063 PS-63 BRIGHT GUN METAL

Tamiya 86063 PS-63 BRIGHT GUN METAL

Tamiya PS-63 PS-63 BRIGHT GUN METAL These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.

119,-

Hovedbilde Tamiya 86027 PS-27 Polycarb Spray Fluorescent Yellow 3 ...

Tamiya 86027 PS-27 Polycarb Spray Fluorescent Yellow 3 ...

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-27 Fluorescent Yellow) For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-