Hopp til innhold

Traxxas 7051 Driveshaft Assembly Slash VXL 3x10mm Pin

Art.nr: TRX 7051

99,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 This is the Driveshaft Assembly for use on the
                     Traxxas 1/16 Slash VXL

FEATURES: Nylon construction
          Black in color
          Fits left or right

INCLUDES: One Fully Assembled Driveshaft Assembly

REQUIRES: Installation on the vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 7051X
Copied
These are the optional Driveshafts for use on the             Traxxas 1/16 Slash VXL 4WD Brushless RTR.             Traxxas 1/16 Rally VXL 4WD Brushless RTR. FEATURES: Steel construction           Constant velocity INCLUDES: Four Driveshafts REQUIRES: Installation on the vehicle

839,-

KJØP

Kunder kjøpte også

Traxxas 60WT/700cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 60WT (700cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Silicon Shock Oil Premium 40WT (500cSt) 60ml

99,-

109,-

KJØP
-9%
Silicon Shock Oil Premium 50WT (600cSt) 60ml

99,-

109,-

KJØP
-9%
These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Ball bearings           Blue rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 12mm (0.47")           Inner Diameter: 8mm (0.31")           Width: 3.5mm (0.14")

49,-

Ikke på lager
Disse lagerene er samme størrelse som Tamiya 850 Yeah Racing RC PTFE Bearing (5x8x2.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011BS/10) RC Telfon Bearing (5x8x2.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

79,-

89,-

KJØP
-11%
 This is the RPM Blue Axle Carriers for the Traxxas 1/16 scale                           E-Revo and 1/16 scale Slash. FEATURES: Blue plastic construction           Stronger pivot ball mounting   INCLUDES: One left and right axle carrier, four molded caps, eight 2x8mm             flathead screws, instructions and decals   REQUIRES: Installation following the included instructions

169,-

KJØP
This is the Transmission Gear Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon input and output gears           Steel idler gear INCLUDES: 18T Input Gear           25T Input Gear           13T Idler Gear           35T Output Gear           3x13.75mm Screw Pin REQUIRES: Installation on the vehicle

129,-

KJØP
This is the Chassis for use on the                  Traxxas 1/16 E-Revo, Slash VXL and Rally VXL Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: One Chassis REQUIRES: Installation on vehicle SPECS:    Length: 245mm (9.6")           Width: 107mm (4.2")           Height: 40mm (1.6")

189,-

Ikke på lager
This is the Complete Differential Assembly for use on the                   Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel and nylon construction INCLUDES: One Complete Differential Assembly REQUIRES: Installation on the vehicle

289,-

KJØP
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
These are the Front and Rear Gearbox Halves for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Front and Rear Gearbox Halves REQUIRES: Installation on the vehicle  

59,-

KJØP
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
These are the Assembled SCT Tires and Wheels for use on the                   Traxxas 1/16 Slash VXL 4WD RTR FEATURES: SCT satin chrome wheels           Red beadlock style           SCT off-road racing tires INCLUDES: One Left and One Right Assembled SCT Tire and Wheel REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 67.4mm (2.7")           Width: 28.5mm (1.1")           Hex: 12mm

229,-

KJØP
Charge Lead Tamiya with 4mm banana plugs

69,-

KJØP
NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon.   This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High  Current Connector and Integrated Balance Connector   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 2S2P  Continuous Discharge: 25C (55A)  Max Burst Rate: 50C (110A)  Watt Hours: 16.28  Charge Rate: 1C (2.2A)  Max Charge Rate: 2C (4.4A)  Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm)  Weight: 4.2oz (118g)

549,-

569,-

KJØP
-4%
EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification   One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! ­ ­ QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER ­ Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries ­ ­     EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: ­ 100–240 Volts Charge Current Range: ­ 1.0-4.0A (40W Max.) Discharge Current Range: ­ 500mAh Current Drain For Balance Ports: ­ 500mAh NiMH Battery Cell Count: ­ 5–8 Cells LiPo Cell Count: ­ 2–3 Cells Net Weight: ­ 365g Dimensions: ­ 146 x 123 x 53mm     MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

KJØP
-9%
This is the Traxxas replacement Body Washers. FEATURES:  Nylon construction            Helps prevent the body mount hole from cracking prematurely            White in color SPECS:     Outer Diameter: 0.87" (22mm)            Inner Diameter: 0.26" (6.7mm) INCLUDES:  Eight large body mount washers

29,-

Ikke på lager
This is a pair of Traxxas TE37 Volk Racing Touring Car Wheels and Gymkhana Slick Tires. FEATURES Plastic construction, green in color with chrome finish spokes Six spoke TE37 Volk Racing design Gymkhana slick tires mounted to wheels INCLUDES Two TE37 Volk Racing Touring Car Wheels and Gymkhana Slick Tires SPECIFICATIONS Width: 1.02" (26mm) Diameter: 2.5" (65mm) Hex Size: 12mm

229,-

KJØP
This is a replacement Traxxas Transmitter Antenna, and is intended for use with the Traxxas 2.4GHz TQ Transmitter.

69,-

Ikke på lager
These are the Front and Rear Body Mounts for the                   Traxxas 1/16 scale Rally Racer. FEATURES: Plastic construction INCLUDES: One-piece Rear and two-piece Front Body Mounts REQUIRES: Fastening to chassis and installing body

59,-

69,-

KJØP
-14%
These are the Shock Pistons and Travel Limiters                          for the Traxxas Rally VXL. FEATURES: Red plastic shock pistons with 2 x.5mm holes           Back plastic travel limiters INCLUDES: Four shock pistons           Four travel limiters REQUIRES: Installation in shocks SPECS:    Thickness:        Piston (.06" / 1.5mm)   Limiter (.16" / 4mm)           Inside Diameter:  Piston (.09" / 2.5mm)   Limiter (.09" / 2.5mm)           Outside Diameter: Piston (.30" / 7.6mm)   Limiter (.19" / 5mm)

29,-

KJØP
This is the Foam Body Bumper for the Traxxas 1/16 Rally VXL. FEATURES: Foam construction           Black in color INCLUDES: One foam body bumper REQUIRES: Installation on to rally car SPECS:    Length: 139mm (5.47")           Width: 43mm (1.69")           Thickness: 14.5mm (0.57")

29,-

KJØP
This is the Front Bumper and Mount for the Traxxas 1/16 scale Rally VXL. FEATURES: Black plastic construction INCLUDES: 1 Mount and 1 Bumper REQUIRES: Installation onto the 1/16 Rally chassis

89,-

99,-

KJØP
-10%
These are the Rubber Sealed Ball Bearings for use on the               Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles. FEATURES: Blue rubber sealed           May also be used in any vehicle where this size bearing is required INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 8mm (0.31")           Inner Diameter: 4mm (0.16")           Width: 3mm (0.12")

49,-

KJØP
These are the stock replacement Shock Springs for use on the                  Traxxas 1/16 VXL Rally RTR. FEATURES: Steel construction           White in color           -10% progressive compression, green firmness rating INCLUDES: Two Shock Springs REQUIRES: Installation on the vehicle SPECS:    Length: 18mm (0.70")           Outer Diameter: 14mm (0.55")           Wire Diameter: 1.4mm (0.06")

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png