Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 4x4 VXL / Traxxas 6845G Drag Link Alu Green
-8%

Traxxas 6845G Drag Link Alu Green

Art.nr: TRX 6845G

119,-

129,-

- 8%
Traxxas

Traxxas
På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Drag link, machined 6061-T6 aluminum (red-anodized)

This ultra-rigid aluminum piece provide added stability and durability for drivers seeking the ultimate in control from their Slash, Stampede, or Rustler 4X4 model.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 3932 Flat Head Machine Hex Drive Screws 3x6mm ...
Traxxas 3932 Flat Head Machine Hex Drive Screws 3x6mm ...
These are the 3x6mm Flathead Machine Screws used on the                     Traxxas T-Maxx 3.3 RTR. FEATURES: Constructed of steel, black in color INCLUDES: Six 3x6mm Flathead Machine Screws REQUIRES: 2.5mm hex wrench. SPECS:    Length: 6mm           Diameter: 3mm COMMENTS: Can be used in any application where a screw of this size is needed.

35,-

På lager 2
KJØP
Hovedbilde Traxxas 9097 LED Light Rear Bumper Hoss 4x4
Traxxas 9097 LED Light Rear Bumper Hoss 4x4
Traxxas Hoss 4x4 LED Lights Rear

229,-

249,-

På lager 3
KJØP
-8%
Hovedbilde Traxxas 10246-BLUE Steering Bellcranks Set Alu Blue ...
Traxxas 10246-BLUE Steering Bellcranks Set Alu Blue ...
Traxxas 10246-BLUE - Aluminum Bellcrank Assembly Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your short course machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely for silky-smooth turning action. The set includes aluminum supports, servo saver bushing, drag link, and hardware. Add the 10247 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. ­ Includes bellcranks, posts, drag link, servo saver bushing, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 10247 aluminum servo horn Accessory part for: Maxx® Slash®

779,-

819,-

På lager 1
KJØP
-5%
Hovedbilde Traxxas 9096 LED Light Front Bumper Hoss 4x4
Traxxas 9096 LED Light Front Bumper Hoss 4x4
Traxxas Hoss 4x4 LED Lights Front

169,-

På lager 1
KJØP
Hovedbilde Traxxas 8935X Bumper Front (use with LED Lights #8990) ...
Traxxas 8935X Bumper Front (use with LED Lights #8990) ...
Bumper, front (for use with #8990 LED light kit)

69,-

På lager 4
KJØP
Hovedbilde Traxxas 6721G Wing, Rustler® 4X4 (green)/ 3x8 FCS (3)
Traxxas 6721G Wing, Rustler® 4X4 (green)/ 3x8 FCS (3)
Wing, Rustler® 4X4 (green)/ 3x8 FCS (3)

69,-

På lager 2
KJØP
Hovedbilde Traxxas 6720 Body mounts, front & rear
Traxxas 6720 Body mounts, front & rear
Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

149,-

På lager 2
KJØP
Hovedbilde M-DRIVE 30070 Hex/Nut Driver Tool - 7mm Hovedbilde M-DRIVE 30070 Hex/Nut Driver Tool - 7mm
M-DRIVE 30070 Hex/Nut Driver Tool - 7mm
M-DRIVE Hex/Nut Driver Tool - 7mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 7mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 7mm: For M4 nuts

79,-

89,-

** Ikke på lager
KJØP
-11%
Hovedbilde M-DRIVE - Body Reamer 0-14mm with Protective Cap
M-DRIVE - Body Reamer 0-14mm with Protective Cap
M-DRIVE - Body Reamer 0-14mm with Protective Cap High quality body reamer with black anodized aluminium handle and a super sharp conical HSS cutting blade that cuts perfect 0-14mm holes in Lexan bodies. An aluminium protective cap is also included. Specs: Handle: Black anodized aluminium Handle Diameter: 18.7mm Handle Length: 76mm Laser Engraving: M-DRIVE logo + size Cutting Tool Size: 0-14x42mm Weight (including the protective cap): 47.5g Suitable for: Making round holes up to 14mm in diameter in Lexan bodyshells

169,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm ... Hovedbilde Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm ...
Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm ...
Traxxas 3426 - Heavy Duty Rubber Pit-Table Mat New Traxxas pit mats are a perfect gift idea and companion for any hobbyist. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect workbenches (or mom's kitchen table) from damage. The generous 36" x 20" (91.4 x 50.8cm) size is large enough to accommodate most Traxxas vehicles, with specially designed compartments to organize your parts and tools. Features: Heavy-gauge, chemical-resistant rubber construction protects underlying surfaces Multiple compartments for organizing tools and parts Large 36" x 20" (91.4 x 50.8cm) size accommodates most Traxxas vehicles Helps prevent spillage The perfect accessory for virtually any hobbyist

519,-

549,-

På lager 5
KJØP
-5%
Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ... Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 4100KV Motor Combo - 2-3S LiPo   ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor   EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.   Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

** Ikke på lager
KJØP
-11%
Hovedbilde Hobbywing 30404500 QuicRun 3660 G2 Brushless Motor ...
Hobbywing 30404500 QuicRun 3660 G2 Brushless Motor ...
Sensorløs 2-3s LiPo 1/10 Sensorløs børsteløs motor som blant annet passer 1/10-biler. Denne motoren skal brukes på 2-3S LiPo. Leveres med ferdigloddet med 4mm gullkontakter. Dette produktet leveres uten sensorkabel og vil ikke funke med andre Hobbywing-enheter som ikke bruker det samme systemet. Spesifikasjoner Akseldiameter 5mm Diameter 36mm Lengde 60mm Vekt 273g KV 3150 Gullkontakter (male) 4.0mm

495,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8 Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE - Car and Truck Stand Work Like a Pro with the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addition to your workbench. Made from high-quality aluminum and anodized with a brilliant blue finish, the RC stand is built for years of dependable service. The stand swivels a full 360° on dual ball bearings for smooth, precise action. A handy locking lever secures the stand in one of 16 different positions for maximum stability. Pick up your Traxxas RC stand today and start working like a pro! RC Stand Features: Engineered for the full range of Traxxas 1/10 to 1/8 scale vehicles Use with TRX-4M foam stand (9794) for 1/18 scale models Use with Foam Inserts (8794) for LaTrax 1/18 scale and Traxxas 1/16 Scale models Tough aluminum construction with a brilliant blue finish Dual ball bearings for smooth 360° rotation Locking lever with 16 positions Non-slip foam pads on top and bottom Perfect for maintaining and storing vehicles Prevents flat-spotting of tires Compatible with 1/18 TRX-4M™ The Traxxas RC stand features cutouts for the TRX-4M display stand (9794, sold separately) to securely hold 1/18 scale models for storage and maintenance. Compatible with LaTrax 1/18 Scale and Traxxas 1/16 Scale Models The foam insert set for the Traxxas RC Stand (8794, sold separately) accommodates smaller scale models.

479,-

519,-

På lager 1
KJØP
-8%
Hovedbilde Traxxas 6795 LED Light Front & Roof Skid Set Complete ... Hovedbilde Traxxas 6795 LED Light Front & Roof Skid Set Complete ...
Traxxas 6795 LED Light Front & Roof Skid Set Complete ...
Traxxas Rustler 4X4 LED Light Kit The Traxxas Rustler 4X4 takes stadium truck performance to new heights and now there’s an LED light kit to extend the fun after sunset. High-intensity LEDs come pre-installed and integrated in a new front bumper and roof skid made from our toughest composite material. The two forward facing bright-white LED light bars and rear red light bar are regulated by the included chassis-mounted power supply. Built Traxxas Tough and fully waterproof, the Rustler 4X4 LED light kit adds a fun new dimension to the Rustler 4X4 experience. Features: Efficient, high-intensity LED lighting Front bumper with integrated LED lights Roof skid with integrated front (white) and rear (red) light bars Regulated power supply for stable lighting performance Easy installation with included power tap connector Includes mounting hardware

579,-

599,-

På lager 1
KJØP
-3%
Hovedbilde Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s Hovedbilde Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s
Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s
QuicRun WP 10BL120 G2 - Brushless Electronic Speed Controller Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port PRODUKTINFORMASJON 120A 2-4S XT60 BEC IP67 QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter. Spesifikasjoner Dimensjoner (LxBxH) 52.8x39.8x38.2mm Vekt 119g LiPo 2-4S BEC 6V / 7.4V - 5A Max anbefalt motor 3S KV4000 3660 Max anbefalt motor 4S KV2600 4268

749,-

799,-

På lager 1
KJØP
-6%
Hovedbilde Traxxas 6710 Body Reinforcement Rustler 4x4 Hovedbilde Traxxas 6710 Body Reinforcement Rustler 4x4
Traxxas 6710 Body Reinforcement Rustler 4x4
Traxxas body reinforcement sets provide added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits.

59,-

På lager 4
KJØP
Hovedbilde Traxxas 6828A Differential Output Yokes HD with Half ...
Traxxas 6828A Differential Output Yokes HD with Half ...
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)

95,-

På lager 3
KJØP
Hovedbilde Traxxas 8719-70 Speed Bit Nut Driver 7mm
Traxxas 8719-70 Speed Bit Nut Driver 7mm
Speed bit, nut driver, 7.0mm

99,-

119,-

På lager 3
KJØP
-17%
Hovedbilde Traxxas 8711 Speed Bit Master Set Hex Driver ... Hovedbilde Traxxas 8711 Speed Bit Master Set Hex Driver ...
Traxxas 8711 Speed Bit Master Set Hex Driver ...
Speed Bit Master Set Hex Driver (7-pieces) Traxxas 7-Piece Metric Hex Bit Master Set 7-Piece Metric Hex Bit Master Set (#8711) Features: Precision-ground, hardened steel metric hex drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm Ball end drivers: 2 mm, 2.5 mm, 3 mm Maximum Durability 7-Piece Metric Hex Bit Master SetTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™.  

949,-

999,-

På lager 2
KJØP
-5%
Hovedbilde Traxxas 2968X Li-Po Voltage Meter/Balancer with ... Hovedbilde Traxxas 2968X Li-Po Voltage Meter/Balancer with ...
Traxxas 2968X Li-Po Voltage Meter/Balancer with ...
LiPo Cell Voltage Checker/Balancer (2968X)  The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.  NOTE: Do not attempt to use the battery adapters for charging or any purpose other than adapting Traxxas iD batteries to the cell voltage checker.  

439,-

469,-

På lager 1
KJØP
-6%
Hovedbilde Traxxas 6728G Body Skid Plate Roof Green Rustler 4x4
Traxxas 6728G Body Skid Plate Roof Green Rustler 4x4
  Skid plate, roof (body) (green)/ 3x12 CS (4)

69,-

På lager 2
KJØP
Hovedbilde Traxxas 6719 Body support Rustler 4x4, 3x12mm CS (4)
Traxxas 6719 Body support Rustler 4x4, 3x12mm CS (4)
Body support Rustler 4x4, 3x12mm CS (4)

89,-

På lager 3
KJØP
Hovedbilde Traxxas 3431 Straight Tip Scissors
Traxxas 3431 Straight Tip Scissors
Traxxas straight tip heavy-duty polycarbonate scissors are perfect for cutting curved lines in polycarbonate bodies and other simmilar materials.

119,-

På lager 2
KJØP
Hovedbilde Traxxas 3432 Curved Tip Scissors
Traxxas 3432 Curved Tip Scissors
Traxxas curved tip heavy-duty polycarbonate scissors are perfect for cutting around wheel wells and other curved lines in polycarbonate bodies and other simmilar materials.

119,-

129,-

På lager 3
KJØP
-8%
Hovedbilde Traxxas 6877A Clear Gear Cover Slash 4X4
Traxxas 6877A Clear Gear Cover Slash 4X4
This is the optional Clear Gear Cover for use on the Traxxas Slash 4x4. FEATURES: Plastic construction           Clear in color INCLUDES: One Clear Gear Cover REQUIRES: Installation on the vehicle

55,-

På lager 2
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png