Traxxas

Traxxas 6451 Driveshaft Front XO-1

Art.nr: TRX 6451

459,-

Traxxas

Traxxas

På lager: 2

På lager i vår butikk i Oslo

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Driveshaft, front (steel-spline constant-velocity) (complete assembly) (1)

The Traxxas front steel constant velocity driveshaft offer the ultimate in torque handling and efficient power transfer with a larger 6 mm stub axle. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. Fits left or right position.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde Traxxas 6452 Driveshaft Rear XO-1

Hovedbilde Traxxas 6452 Driveshaft Rear XO-1

Traxxas 6452 Driveshaft Rear XO-1

Art.nr: TRX 6452

Copied

Driveshaft, rear (steel-spline constant-velocity) (complete assembly) (1) The Traxxas rear steel constant velocity driveshaft offer the ultimate in torque handling and efficient power transfer with a larger 6 mm stub axle. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. Fits left or right position.

459,-

På lager 1

Hovedbilde Traxxas 6757 Rebuild Kit XO-1

Traxxas 6757 Rebuild Kit XO-1

Art.nr: TRX 6757

Copied

Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware) Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to rebuild two driveshafts. Fits 1951R, 6851R, 6852R, 6451, 6452, and 9450R.

219,-

239,-

På lager 2

-8%

Kunder kjøpte også

Hovedbilde Hobbywing 30860400 Fan MP4510SH 6V 8000RPM Black

Hobbywing 30860400 Fan MP4510SH 6V 8000RPM Black

Hobbywing MP4510SH 8000RPM 6V 0.30A Cooling Fan Black For EZRUN MAX5 ESC #30860400 Description: This is Hobbywing MP4510SH 8000RPM 6V 0.30A Cooling Fan Black For EZRUN MAX5 ESC. Feature: For: EZRUN MAX5 ESC Material: Plastic Color: Black Porous bearing Waterproof Specification: Size: 45mm (L) * 44mm (W) *10mm(D) RPM: 8000RPM@6V Include: Hobbywing MP4510SH 8000RPM 6V 0.30A Cooling Fan (1 pc) Screw (4 pcs)

79,-

** Ikke på lager

Hovedbilde Traxxas 7895R Suspension Kit WideMaxx Red X-Maxx

Hovedbilde Traxxas 7895R Suspension Kit WideMaxx Red X-Maxx

Traxxas 7895R Suspension Kit WideMaxx Red X-Maxx

X-Maxx® WideMaxx® Kit A Tougher, Wider Stance The Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on the X-Maxx’s already legendary performance by widening the stance 60 mm for even greater cornering stability. Take your X-Maxx to the next level with the WideMaxx kit and get ready for the ultimate expression of Traxxas Tough™. The X-Maxx WideMaxx kit includes extended versions of the extreme heavy-duty suspension arms for a 2.36” (60 mm) wider stance. Molded from our toughest composite material, the new arms offer just enough flex to resist breaking, even in cold weather. Five different color options allow maximum customization of your X-Maxx. New 1.346 rate shock springs replace the standard springs for optimal handing performance. Wider suspension links and steel driveshafts complete the package and X-Maxx's thoughtful engineering makes installation quick and easy. X-Maxx WideMaxx Quick Features Available in five different color options Widens the X-Maxx by 2.36" (60 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspension arms (4) Extended driveshafts (4) WideMaxx toe links (2) New springs (1.346 rate) MODEL 7895: WideMaxx® Kit

2.195,-

2.395,-

På lager 1

-8%

Hovedbilde Traxxas 8638 Toe Link 5.0mm F/R Steel (2)

Traxxas 8638 Toe Link 5.0mm F/R Steel (2)

Toe link, 5.0mm steel (front or rear) (2)

115,-

På lager 1

Hovedbilde Traxxas 8646 Rod Ends (Assembled with Hollow Balls) ...

Traxxas 8646 Rod Ends (Assembled with Hollow Balls) ...

Rod ends, heavy duty (toe links) (8) (assembled with hollow balls)

89,-

På lager 1

Hovedbilde Traxxas 6432 Splitter Extension 3x10mm XO-1

Traxxas 6432 Splitter Extension 3x10mm XO-1

This is the Splitter Extension for the Traxxas XO-1. FEATURES: Molded plastic construction INCLUDES: Splitter Extension with two 3x10mm Countersunk Screws

69,-

På lager 1

Hovedbilde Traxxas 6469 Wheel Hub Splined 17mm XO-1

Traxxas 6469 Wheel Hub Splined 17mm XO-1

225,-

På lager 2

Hovedbilde Traxxas 6750 Half Shaft External Splined XO-1

Traxxas 6750 Half Shaft External Splined XO-1

This is the Constant Velocity Half Shaft for the Traxxas XO-1 FEATURES: Polished steel construction Externally splined INCLUDES: One Constant Velocity Half Shaft

99,-

På lager 3

Hovedbilde Traxxas 6720 Body mounts, front & rear

Traxxas 6720 Body mounts, front & rear

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

149,-

På lager 2

Hovedbilde Traxxas 6737 Bumper, rear/ bumper mount, rear

Traxxas 6737 Bumper, rear/ bumper mount, rear

Bumper, rear/ bumper mount, rear

89,-

På lager 2

Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time. Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

På lager 2

-10%

Hovedbilde Traxxas 7468X Shock Parts GTR

Traxxas 7468X Shock Parts GTR

Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

59,-

På lager 1

Hovedbilde Traxxas 1926 Vinyl Caps/Antenna Spool

Traxxas 1926 Vinyl Caps/Antenna Spool

This is a set of TRAXXAS receiver tube caps and a spool that could be used for any receiver antenna tubes. FEATURES: Caps are yellow plastic. Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps One spool

25,-

På lager 4

Hovedbilde Traxxas 7461X Shocks GTR Long Hard Anodized (2)

Traxxas 7461X Shocks GTR Long Hard Anodized (2)

This is a pair of Long Traxxas GTR Shocks. FEATURES: Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES: Two Long Traxxas GTR Shocks Bottle of Silicone Shock Oil REQUIRES: Springs of modeler's choice SPECS: Length: 3.3" (84mm) from upper and lower mounting hole centers Fjærer som passer. TRX 7444

459,-

489,-

På lager 2

-6%

Hovedbilde Traxxas 1664T Shock Shafts Long Nitro Rustler (2)

Traxxas 1664T Shock Shafts Long Nitro Rustler (2)

There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS: Diameter: 3mm (0.118") Length: 47 mm (1.85") Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

** Ikke på lager

Hovedbilde Traxxas 6757 Rebuild Kit XO-1

Traxxas 6757 Rebuild Kit XO-1

Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware) Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to rebuild two driveshafts. Fits 1951R, 6851R, 6852R, 6451, 6452, and 9450R.

219,-

239,-

På lager 2

-8%

Hovedbilde Traxxas 6834 Suspension Pin Set Slash 4x4

Traxxas 6834 Suspension Pin Set Slash 4x4

This is the Suspension Pin Set for the Traxxas Slash 4X4. The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction Silver in color INCLUDES: Four 51.5mm pins Four 30mm pins REQUIRES: Installation on the Slash 4x4

55,-

På lager 2

Hovedbilde Traxxas 6869 Wheel Adapters 12mm hex (4)

Traxxas 6869 Wheel Adapters 12mm hex (4)

Anodized Aluminum 12mm Hex Wheel Adapters for 6mm shafts Traxxas now makes it possible to add the strongest, most durable front and rear driveshafts to the Rally, Slash 4X4, and Stampede 4X4. Originally designed for the 100+mph XO-1 Supercar, steel-splined driveshafts with 6mm axles can now be added to your favorite 4WD off-road model. The new Traxxas 12mm aluminum hex adapters feature a 6mm inner diameter to accept the beefier axles. The 12mm hex adapters are easy to install, compatible with Traxxas short course and rally wheels, and will also fit most standard 12mm hex-style wheels. The rugged machined-aluminum construction provides maximum performance, with custom looks coming from the vivid blue-anodized finish. Hex adapters require the following items for installation on Slash 4X4, Rally, and Stampede 4X4 -- #6451 (x2), #6452 (x2), #6439, #6455, #5117 (x3).

299,-

På lager 2

Hovedbilde Traxxas 6455 Axle Carriers Rear Left/Right Aluminum ...

Traxxas 6455 Axle Carriers Rear Left/Right Aluminum ...

This is a pair of Rear Axle Carriers for the Traxxas XO-1. FEATURES: Constructed of 6061-T6 aluminum, anodized blue in color INCLUDES: Two Rear Axle Carriers

429,-

På lager 1

Hovedbilde Traxxas 5413 Center Wing Mount Cross-Brace

Traxxas 5413 Center Wing Mount Cross-Brace

This is the replacement Center Wing Mount for the optional Traxxas Revo series wing mount set - TRX 5411 FEATURES: Composite nylon construction, black in color Replaces a worn or damaged center wing mount INCLUDES: One Center Wing Mount Two Beveled Nylon Wing Washers

59,-

På lager 3

Hovedbilde Traxxas 5337 Skid Plate Set Revo

Traxxas 5337 Skid Plate Set Revo

This is the Front and Rear Skid Plates for the Traxxas Revo. FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece design INCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part #2577 (1) 3X30mm button head screws Part #2582 REQUIRES: Installation on the Traxxas Revo

99,-

På lager 3

Hovedbilde Traxxas 6449 Spur Gear 54T 1.0 Metric Pitch XO-1

Traxxas 6449 Spur Gear 54T 1.0 Metric Pitch XO-1

This is the 54T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1

39,-

På lager 1

Hovedbilde Traxxas 3643 Turnbuckles Camber Link 49mm

Traxxas 3643 Turnbuckles Camber Link 49mm

These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Ikke på lager

Hovedbilde Traxxas 5460X Shocks, GTR hard-anodized

Traxxas 5460X Shocks, GTR hard-anodized

A full set of four hard anodised shocks with threaded bodies and TiN Shafts for super smooth action. Spend less time rebuilding and more on the track!

919,-

På lager 3

Hovedbilde Traxxas 6452 Driveshaft Rear XO-1

Hovedbilde Traxxas 6452 Driveshaft Rear XO-1

Traxxas 6452 Driveshaft Rear XO-1

Driveshaft, rear (steel-spline constant-velocity) (complete assembly) (1) The Traxxas rear steel constant velocity driveshaft offer the ultimate in torque handling and efficient power transfer with a larger 6 mm stub axle. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. Fits left or right position.

459,-

På lager 1

Hovedbilde Traxxas 6430 Bulkhead Front Tie Bar Bushings XO-1 (2)

Traxxas 6430 Bulkhead Front Tie Bar Bushings XO-1 (2)

This is the Rear Bulkhead for the Traxxas XO-1. FEATURES: Molded plastic construction Holds rear suspension arm hinge pins in place INCLUDES: Rear Bulkhead for the Traxxas XO-1

89,-

På lager 2