Traxxas

Traxxas 5671 Geode 3.8" Chrome Wheels Summit (2)

Art.nr: TRX 5671

145,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

These are the 3.8" Chrome Geode Wheels for use on the
Traxxas Summit Truck RTR (TRAC38**).

FEATURES: Nylon construction
Beadlock style
Chrome in color

INCLUDES: Two Chrome 3.8" Geode Wheels

REQUIRES: Tires
Beadlock Sidewall Protectors.

SPECS:    Outer Diameter: 96.5mm (3.8")
          Width: 70.5mm (2.8")
          Hex: 17mm

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Castle Creations 011011900 Castle Link Programming Kit ...

Castle Creations 011011900 Castle Link Programming Kit ...

This is the Castle Creations Castle Link V3 USB Programming Kit. Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10* FEATURES Simple programming interface for the Castle Creations Phoenix, Talon,Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle Creations external switching regulators (BECs) Air users can customize values for low voltage cutoff, prop brakestrength, governor gain and more Suface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Demo mode checks available settings without connecting device to computer Downloadable updates INCLUDES Castle Link V3 USB Programming Kit with Standard USB Cable COMMENTS *Macintosh users may use software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

379,-

439,-

-14%

Hovedbilde Traxxas 3675 Dyable 2.2

Traxxas 3675 Dyable 2.2" Front Wheel Rustler/Stampede ...

12 mm hex. These are FRONT nylon rims for the Traxxas electric Rustler, electric Stampede, and any other Traxxas vehicles which use a hex-style drive washer. These will NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1974 on those. * Includes: (2) white nylon front rims (aka wheels) * Features: dyeable white nylon construction 8-hole design hex-drive hub system (drive hubs not included- TRX 1654) * Specs: 2.2" diameter 1.9" width * Comments: The rear set of rims is TRX 3674. The only difference between these two rims is the internal offset is greater on the rears.

55,-

Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium

Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium

Traxxas 6468 Tire Glue TRX Ultra Premium

Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond). To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features: The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr

139,-

159,-

-13%

Hovedbilde Zap Blue Adhesives Thread Locker .20 oz

Zap Blue Adhesives Thread Locker .20 oz

Pacer has designed this bottle of Threadlocker Compound to be used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS: Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker Locks threaded fasteners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt) Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue. The reason being is the glue requires a large amount of oxygen or the glue will dry out. All one would need to do once you have the glue is shake the bottle and turn upside down, if the tip turns Blue then the glue is present. To some the bottle may appear empty.

59,-

Hovedbilde Traxxas 5666 Sidewall Protector Beadlock Style Blue ...

Hovedbilde Traxxas 5666 Sidewall Protector Beadlock Style Blue ...

Traxxas 5666 Sidewall Protector Beadlock Style Blue ...

These are the Blue Sidewall Protectors from Traxxas. FEATURES: Nylon construction Blue in color Beadlock style INCLUDES: Two Blue Sidewall Protectors Twenty Four 2.5x8mm Cap Screws REQUIRES: Installation on the wheels SPECS: Outer Diameter: 100.4mm (4") Inner Diameter: 79.8mm (0.08") Width: 5mm (0.20")

85,-

Hovedbilde Traxxas 6842 Spur Gear 0.8 Metric Pitch 50T

Traxxas 6842 Spur Gear 0.8 Metric Pitch 50T

This is a Traxxas M0.8P, 50T Spur Gear. FEATURES: M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDES: One M0.8P, 50T Spur Gear SPECS: Pitch: M0.8 Tooth: 50 Outer Diameter: 41.5mm (1.63") Inner Diameter: 11mm (0.43")

39,-

Hovedbilde Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)

149,-

169,-

-12%

Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 15mm Diameter: 3mm

35,-

Hovedbilde Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)

Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)

These are Inner Drive Cups for the Traxxas Revo/T-Maxx. FEATURES: Steel construction INCLUDES: Two steel constant velocity driveshafts Two M4/15 screw pins REQUIRES: Installation onto vehicle. SPECS: Length: 18mm (.70") Diameter: 13mm (.51")

99,-

Hovedbilde LouiseRC 3276CH Tire & Wheel MT-MCROSS 3,8

LouiseRC 3276CH Tire & Wheel MT-MCROSS 3,8" Chrome ...

1/2-OFFSET - 4WD FRONT & REAR Fits: Traxxas SUMMIT Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Front & Rear HPI SAVAGE X 4.6 Front & Rear Kyosho Mad Force Kruiser 4WD Front & Rear Kyosho FO-XX VE 4WD Front & Rear Kyosho FO-XX GP 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes - 5353X, 5353G & 5353R: Traxxas E-REVO Front & Rear TRX56036-1 Traxxas E-REVO Front & Rear TRX56036-4 Also fit these Trucks if you want a wider stance (width): Traxxas E-Maxx Front & Rear (if converting to 17 mm hexes) Traxxas E-Maxx Brushless Front & Rear Traxxas E-REVO Front & Rear (if converting to 17 mm hexes) Traxxas E-REVO Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas T-Maxx 3.3 Front & Rear (if converting to 17 mm hexes) Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear Specs: Wheel diameter: 3.8" Tire Diameter: Tire Width: Weight (each): Hex: 17 mm Offset: 1/2" Tire Compound: Sport Wheel finish: Chromed Nylon

599,-

649,-

-8%

Hovedbilde RPM 80102 Front Bumper Black T/E-Maxx

RPM 80102 Front Bumper Black T/E-Maxx

Tubular Front Bumper for the Traxxas T-Maxx & E-Maxx Quick Notes: – replaces stock Traxxas #3926, #4935 & #4935X – matching Heavy Duty Rear Bumper also available Description RPM bumpers are not only the strongest bumpers made; they are extremely lightweight and have a scale, realistic appearance. Our front bumper adds extra protection with a lower, tubular bar extending down to help absorb impacts that would have been taken by the front skid plate alone. We’ve also strengthened the areas around the screw holes. Our rear bumpers have the scale appearance of a step bumper found on most full-sized trucks. Our rear bumper weighs the same as a stock bumper, yet is stronger, and supports the rear skid plate for added rear-end protection. In addition, we’ve designed a recessed area where you, with a little creativity, can add in a customized, scale license plate or a ball hitch! All colored bumpers have the color molded in, not dyed, for long lasting color, even when scratched. Our “Chrome” finish bumpers are coated over our silver bumper to help prevent nicks and scratches from showing through.

149,-

Hovedbilde Traxxas 3769 Spring Pre Load Spacers

Traxxas 3769 Spring Pre Load Spacers

This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

Hovedbilde Tamiya 86015 PS-15 Polycarbonate Spray Metal Red 3 oz

Tamiya 86015 PS-15 Polycarbonate Spray Metal Red 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-15 Metallic Red). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

Hovedbilde Traxxas 4947X Aluminum Transmission Skid Plate Maxx

Traxxas 4947X Aluminum Transmission Skid Plate Maxx

Denne passer både på E-Maxx og T-Maxx. This is the Optional Center Transmission Skid Plate for the Traxxas Maxx This piece covers the center area below the lower chassis braces FEATURES: One piece, Aluminum Construction Blue Anodized Four lines machined into the plate, as well as 8 holes on the side. INCLUDES: One Center Skid Plate REQUIRES: Traxxas Maxx truck SPECS: Length: 72.3mm (2.84") Width: 62mm (2.45") Thickness: 3.3mm (.13") Center Distance between mounting holes: 59mm/53.2mm (2.31"/2.10")

219,-

Hovedbilde Traxxas 3924 Receiver Box

Traxxas 3924 Receiver Box

Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal, grease, 3x10 mm screws (2), 2.5x8 mm screws, and 3x15 mm screws (2).

149,-

169,-

-12%

Hovedbilde Traxxas 3912 Body Long Wheelbase E-Maxx

Traxxas 3912 Body Long Wheelbase E-Maxx

This is the Long Wheelbase Body for the Traxxas E-Maxx Trucks. FEATURES: Highly detailed body, trimmed Clear plastic body with a protective overspray film INCLUDES: One clear body with decals REQUIRES: Polycarbonate Paint SPECS: Length: 19-1/2" (495.3mm) Width: 6-3/4" (171.45mm) --front Width: 7" (177.8mm) --rear Height: 5-1/2" (139.7mm) Fits: Traxxas E-Maxx Brushless #TRX3908 Traxxas E-Maxx Brushed #TRX3903 (B4)

349,-

Hovedbilde Traxxas 4937 Front Skid Plate T-Maxx

Traxxas 4937 Front Skid Plate T-Maxx

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provides protection to the front differential. FEATURES: Skidplate is constructed of high impact molded black plastic. Front of skidplate kicks up at about 45 degrees to shield the differential from crash damage or hard landings from jumps. Stainless steel mounting plate provides rigid mounting surface. INCLUDES: One plastic front skidplate One stainless steel mounting plate. REQUIRES: Installing on chassis with four 3x10mm countersunk machine screws (not included, use TRX 2552)

69,-

Hovedbilde Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)

This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 12mm (.63") Threaded Length: 11mm (.45") Thread Size: M4x.7mm coarse Hex Wrench Size 2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Hovedbilde Traxxas 2820X LiPo 2S 7.4V 2200mAh 25C w/iD Connector

Traxxas 2820X LiPo 2S 7.4V 2200mAh 25C w/iD Connector

NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon. This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 16 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High Current Connector and Integrated Balance Connector REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus LiPo charging bag SPECIFICATIONS Configuration: 2S2P Continuous Discharge: 25C (55A) Max Burst Rate: 50C (110A) Watt Hours: 16.28 Charge Rate: 1C (2.2A) Max Charge Rate: 2C (4.4A) Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm) Weight: 4.2oz (118g)

549,-

569,-

-4%

Hovedbilde Traxxas 5370 Talon 3.8

Traxxas 5370 Talon 3.8" Tires w/Foam Inserts Revo (2)

This is the Traxxas Talon Tires with Foam Inserts. Used on the Traxxas Revo. FEATURES: Soft compound treaded rubber, low profile design INCLUDES: Two Traxxas Talon Tires with two Foam Inserts REQUIRES: Installing foam inserts and gluing tires to wheels. SPECS: Width: 3.25" (83mm) Outer Diameter: 5.6" (143mm) Inner Diameter: 3.8" (96mm)

359,-

Hovedbilde Traxxas 5654 Stub Axle CV Style Machined Steel

Traxxas 5654 Stub Axle CV Style Machined Steel

This is the CV Style Stub Axle for use on the Traxxas Summit Truck 1/10. FEATURES: Machined steel construction CV style INCLUDES: One CV Style Stub Axle One Cross Pin One Drive Pin One Set Screw REQUIRES: Installation on the vehicle SPECS: Length: 49mm (1.9")

125,-

Hovedbilde Traxxas 5498 Sway bar kit/front and rear)(includes ...

Traxxas 5498 Sway bar kit/front and rear)(includes ...

The Traxxas Revo sway bar kit is a must have for Revo racers everywhere. The kit was created, developed, and extensively field tested by Traxxas driver and reigning monster truck national champion Tim Roberts. The sway bar kit fits E-Revo, and it includes front and rear linkages, mounts, thick and thin sway bars, hardware, a tuning guide, and comprehensive installation instructions. Denne anbefales på det varmeste !

359,-

389,-

-8%

Hovedbilde Traxxas 5338 Toe Link 5.0mm Steel Revo (2)

Traxxas 5338 Toe Link 5.0mm Steel Revo (2)

This is a pair of replacement Toe Links for the Traxxas Revo Truck. These adjust the position of the toe on the vehicle. FEATURES: Steel turnbuckle design 5.0mm diameter INCLUDES: Two front or rear toe links REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 5.1" (129mm)

125,-

Hovedbilde Traxxas 5656 Half Shaft Set Long

Traxxas 5656 Half Shaft Set Long

These are the Long Half Shafts for use on the Traxxas Summit 1/10 Truck RTR. FEATURES: Plastic construction Black in color INCLUDES: Two Long Half Shaft Sets, internal splined half shafts and external half shafts with glued boot REQUIRES: Installation on the vehicle SPECS: Length: 130mm (5") Diameter: 17.3mm (0.68")

99,-

Hovedbilde Traxxas 5653 Diff CV Output Drive/Screw Pin/Cross ...

Traxxas 5653 Diff CV Output Drive/Screw Pin/Cross ...

This is the Differential CV Output Drive Set for use on the Traxxas Summit 1/10 Truck RTR. FEATURES: Steel construction INCLUDES: Differential CV Output Drive Screw Pin with Threadlock Cross Pin Drive Pin Set Screw REQUIRES: Installation on the vehicle

125,-