Hopp til innhold

Traxxas 5394X Forward Only Conversion Kit Revo

Art.nr: TRX 5394X

129,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Convert your Traxxas Revo to forward only with this Forward Only
 Conversion Kit from Traxxas.

 

 


FEATURES

All parts required to convert the Revo to forward only

 


INCLUDES

One forward only shaft (aluminum construction)
 Two forward only gears (white nylon construction)
 Two 3x3.75mm screw pins
 One sensor cover (one black plastic plastic construction)
 One black plastic cover (covers the spot that the optidrive was)
 One blue rubber plug

 


REQUIREMENTS

Assembly following the included instructions and exploded view

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
  Fuel line (610mm or 2ft)

49,-

59,-

KJØP
-17%
This is the Brake Yoke w/Pins for the Traxxas Revo.  It is use on the Center/Front Driveshaft Assembly.     FEATURES Plastic Brake Yoke  Steel Brake Pins(each knurled on one end)  Steel Screw Pins   INCLUDES One Brake Yoke  Two Brake Pins  One Screw Pin   REQUIREMENTS Assembly to the vehicle   SPECIFICATIONS  Brake Yoke Outer Diameter: 18.5mm (.73")  Brake Yoke Center Key Size: 4mm x 6mm (.17" x .24")  Brake Yoke Length: 24mm (.95")  Screw Pin Size: 4mm x 15mm (Threaded length-5mm)  Brake Pin Size: 3mm x 20mm (.12" x .8") COMMENTS Brake Yoke Center is "keyed" to have a positive fit to the shaft.

49,-

KJØP
Trykk her for høyre side.   RPM Front Left Blue A-arms for the Traxxas Summit, Revo & E-Revo (1.0) Quick Notes: Fits the Traxxas Summit, Revo & E-Revo (1.0) Replaces stock Traxxas #5332 Matching Front Right A-arms also available Matching True-Track Rear End Conversion Kit available (for the Revo & E-Revo 1.0) In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo (reference RPM #80212 & #80215) are already compatible with the Summit but due to the extended T-Lock differential on the left side, our Revo front left A-arms would not fit. That is no longer an issue with these A-arms. With a revamped cross-brace to clear the T-Lock differential, our Summit front left A-arms will allow full suspension travel and significantly improve overall suspension durability. RPM front A-arms for the Traxxas Summit are molded from our indestructible blend of engineering grade nylons for unmatched performance and durability. Every RPM molded part in manufactured in the USA and carries with it a limited lifetime warranty against breakage. If you’re tired of replacing broken stock parts over and over, give RPM a try. INCLUDES Front Upper and Lower Left A-Arms  Instruction Sheet

209,-

KJØP
RPM True-Track Rear End Kit for Revo 3.3 & Revo (old) - Blue Replaces stock Traxxas #5331, #5332 & #5334 Quick Notes: Fits both the Revo 3.3 and E-Revo (does not fit the E-Revo 2.0) Replaces stock Traxxas #5331, #5332 & #5334 32 grams lighter than stock components! Perfect rear toe angles Includes massive oversized bearings Matching Front Left & Front Right A-arms are available Matching Front Axle Carriers are available The RPM True-Track Rear A-arm Conversion Kit for the Revo eliminates some of the biggest headaches associated with toe link rear ends. Rear toe angles are nearly impossible to set accurately and there isn’t a gauge currently made that can accurately identify whether each individual wheel’s toe angle is set correctly in relation to the chassis. The RPM True-Track rear end kit completely eliminates the rear toe links, locking in the rear toe angle at a solid 1.5 degrees per side for a total rear toe-in angle of 3 degrees. By getting rid of the rear toe links, we’ve completely eliminated all rear bump steer! That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain. Identical to our T/E-Maxx True-Track Kit, the Revo True-Track Kit retains the stock upper pivot ball in the new, ultra beefy RPM axle carrier to allow precise camber adjustments while the lower pivot ball has been eliminated in favor of a rock-solid 4mm diameter hinge pin that locks in the rear toe angles for race winning consistency (hinge pin replacement part #80970). All aspects of the RPM True-Track Conversion Kit have been beefed up for rugged durability and slop free movement throughout its range of travel. Additionally, we’ve incorporated our oversized bearings into the new RPM axle carrier design, providing an additional 2mm more bearing contact with the axle while doubling the bearing load rating & tripling the fatigue rating over the stock bearings. So does all this come at a cost of added weight? The RPM Revo True-Track Rear A-arm Conversion Kit actually weighs LESS than the stock components it replaces! How much less? 16 grams PER SIDE! That’s a total weight loss of 32 grams or 1-1/8 ounces! That means you get perfect rear toe angles, added A-arm strength, bearings that are more durable & longer lasting, an unbeatable breakage warranty and a reduction in weight! What more can anyone ask for? What’s Included: Our Revo True-Track Rear End Kit consists of two upper rear A-arms, two lower rear A-arms, two beefy rear axle carriers, two outer 6x15mm sealed bearings, two inner 12x21mm sealed bearings, two aluminum pivot ball setscrews, two delrin pivot ball bushing cups, two M3x16mm shock mount screws, two 4mm diameter tool steel hinge pins & enough e-clips to get the job done (4 minimum). RPM Recommendations: The RPM True-Track System is designed to match RPM A-arms (Part #80212 & #80215 – Right Side & #70372 & #70375 – Left Side) & Axle Carriers (#80582 & #80585 – 1 package needed) currently available for the Revo. With the True-Track system mounted at the rear and a set of RPM replacement A-arms & Axle Carriers up front, you are assured the best & most indestructible A-arm / Axle Carrier combination possible! To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70950 Monster Camber Gauge. Tech Notes: These rear end kits work on all earlier versions of the Traxxas Revo (does not fit the Revo 2.0). One kit will complete the entire rear end. These kits will not work in conjunction with Traxxas (#5356) 120-LT Long Travel Rockers.

599,-

KJØP
  RPM Front Right Arms for the Summit, Revo 3.3 & E-Revo (old) - Blue Replaces stock Traxxas #5331 Quick Notes: Fits Traxxas Summit, Revo & E-Revo Replaces stock Traxxas #5331 Matching Front Left A-arms are also available Matching True-Track Rear End Conversion Kits are available (for the Revo & E-Revo) RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Features: Nearly identical in weight to stock A-Arms. Redesigned for incredible durability under the toughest of conditions. More wear resistant than any other material available. Excess A-arm end-play has been eliminated for more accurate caster and toe angle settings. Angled leading and trailing edges eliminate dirt build-up. No low-hanging cross-braces or shock mounting areas providing better ground clearance. Massive shock rod mounting areas for improved rigidity. Available in black & blue. Less than half the price of aluminum A-arms. Molded from our bulletproof blend of nylons and backed by our world renowned breakage warranty. Sold in sets of one upper and one lower A-arm.

209,-

KJØP
These are the replacement FWD/REV Output Gears for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Nylon Construction           Black and White in Color   INCLUDES: One Nylon FWD Output Gear           One Nylon REV Output Gear           One White Nylon Drive Dog Carrier   REQUIRES: Assembly onto Vehicle   SPECS:    FWD Gear-            Diameter:   30mm (0.94")            Thickness: 5.8mm (0.23")            Teeth:     28T           REV Gear-            Diameter:   30mm (0.94")            Thickness: 9.5mm (0.37")            Teeth:     28T

115,-

KJØP
   These are the Center Half Shafts for the Traxxas Revo 3.3. FEATURES: Constructed of hardened plastic           For front and rear driveshafts INCLUDES: Two external splined shafts           Two internal splined shafts REQUIRES: Installing between yokes on each drive shaft assembly SPECS:    Length: 1.9" (48.2mm)

55,-

KJØP
Traxxas 5451X Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)

149,-

169,-

KJØP
-12%
Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 17 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

KJØP
This is the Flange Pipe (4pcs)  For the HPI Racing WR8     FEATURES Steel construction   INCLUDES Four flange pipes   COMMENTS This part is for the  1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

85,-

KJØP
This is the Recoil Starter for the 2.5 and 3.3 Traxxas engines.     FEATURES Black plastic case   INCLUDES One Recoil Starter  Four 3mm x 12mm cap head screws   REQUIREMENTS 2mm Allen Wrench   SPECIFICATIONS  Mounting Holes center-to-center: 27mm   COMMENTS This part is for the recoil unit only  Screws have thread-locking compound pre-applied

269,-

KJØP
This is the Aluminum Exhaust Header for the Traxxas Revo.     FEATURES Aluminum construction  Silver in color  Fluted on tuned pipe end for better silicone coupler connection  Heatsink engine mounting flange   INCLUDES One Exhaust Header   REQUIREMENTS Assembly to vehicle   SPECIFICATIONS  Length: 59mm (2.32")  Pipe diameters: Outside-13mm (.52")  Inside -10mm (.40")  Width between engine exhaust mount holes: 22mm (.866")

249,-

KJØP
This is the Traxxas Marine Grease, 30cc FEATURES Roll-up "toothpaste-style" tube   INCLUDES One tube of marine grease compound SPECIFICATIONS  Volume: 1 oz. (30cc)

89,-

99,-

KJØP
-10%
Spenning: 6.0V Kapasitet: 1700mAh Størrelse: 52x32x30 mm Vekt: 118gr JR PLUG

299,-

319,-

KJØP
-6%
 This is the High Volume Air Filter Body                          for the Traxxas Revo 3.3. FEATURES: Replaces damaged or dirty air filter assemblies           Plastic body with foam element and rubber attachment hose INCLUDES: Foam filter and pre filter, support cap, filter base  and wire mount REQUIRES: Air filter oil. SPECS:    Total Height:  3.9" (100mm)           Filter Diameter: 1.6" (41mm)

169,-

KJØP
 This is the GTR Shock Rebuild Kit by Traxxas. FEATURES: Shock rebuild parts INCLUDES: Four blue plastic shock pistons           Two blue rubber diaphragms           Four black plastic shock ends           Two piston lock nuts           Four metal X-rings COMMENTS: This set will rebuild two shocks

59,-

KJØP
  This is a pair of Shock Shafts for the Revo type GTR Shocks from Traxxas. FEATURES: Constructed of steel, threaded on both ends           TiN coated for strength INCLUDES: Two TiN coated Shock Shafts for the Revo type GTR Shocks REQUIRES: Disassembly of shocks SPECS:    Length: 1.8" (47mm)           Diameter: 0.14" (3.5mm)

125,-

KJØP
      This is a Tube of White Lithium Grease from Traxxas.         This product can be used to lubricate parts, such as gears. FEATURES: Great lubrication for nylon gears INCLUDES: One tube of lithium grease (volume unknown) REQUIRES: Application to parts needing lubrication.  

39,-

KJØP
This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two             driveshaft assemblies  

89,-

KJØP
This is the Upper & Lower RIGHT FRONT Suspension Arm Set                          for the REVO from Traxxas. FEATURES: Durable black nylon construction INCLUDES: One upper RIGHT FRONT suspension arm           One lower RIGHT FRONT suspension arm

89,-

KJØP
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

119,-

139,-

Ikke på lager
-14%
This is a set of Steel Driveshafts for the Traxxas  Revo/Maxx. FEATURES: Steel construction           Can be used to replace a bent or damaged front center driveshaft           Assembled with inner & outer dust boots INCLUDES: Four steel constant-velocity driveshafts SPECS:    Length: 7" (177.8mm) between canter of ball ends           Diameter: .19"  (5mm)   Reservedeler:   Traxxas 5129 Driveshaft Assembly Rebuild Kit Revo/T-Maxx   Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)   Traxxas 5153R Drive Cups Inner Revo (2)   Traxxas 5154 Drive Shaft Steel Constant Velocity Revo/T-Maxx   Traxxas 5166 Stub Axle/Axle Sleeve Revo/T-Maxx        

899,-

949,-

KJØP
-5%
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png