Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / E-Revo 1/10 Brushless / Traxxas 5129 Driveshaft Assembly Rebuild Kit Revo/T-Maxx

Traxxas 5129 Driveshaft Assembly Rebuild Kit Revo/T-Maxx

Art.nr: TRX 5129

89,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx.


FEATURES: Restores performance to worn driveshaft components


INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two
            driveshaft assemblies

 

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 8556X Driveshaft Center Set Front Steel UDR
Traxxas 8556X Driveshaft Center Set Front Steel UDR
  Driveshaft, center, front (steel)/ 2.5x12 screw pin

229,-

KJØP
Hovedbilde Traxxas 8461 Shocks, GTR, 160mm, silver aluminum ...
Traxxas 8461 Shocks, GTR, 160mm, silver aluminum ...
  Shocks, GTR, 160mm, silver aluminum (fully assembled w/o springs) (rear, no threads) (2)

505,-

KJØP
Hovedbilde Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing RC PTFE Bearing (12x18x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6026BS/10) RC Telfon Bearing (12x18x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

139,-

KJØP
-14%
Hovedbilde Yeah Racing YB6017B/S10 RC PTFE Bearing (6x13x5mm) ...
Yeah Racing YB6017B/S10 RC PTFE Bearing (6x13x5mm) ...
Yeah Racing RC PTFE Bearing (6x13x5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6017BS/10) RC Telfon Bearing (6x13x5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Tamiya 86011 PS-11 Polycarbonate Spray Pink 3 oz Hovedbilde Tamiya 86011 PS-11 Polycarbonate Spray Pink 3 oz
Tamiya 86011 PS-11 Polycarbonate Spray Pink 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-11 Pink).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Traxxas 3935 90 Degree Angled Body Clips Revo (10)
Traxxas 3935 90 Degree Angled Body Clips Revo (10)
  These are the replacement Body Clips for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Silver in Color           Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

39,-

Ikke på lager
Hovedbilde Traxxas 5134 Caster Spacers w/Shims (4)
Traxxas 5134 Caster Spacers w/Shims (4)
This is a Package of Replacement Caster Spacers for the Traxxas.                   These spacers adjust caster of the wheels. FEATURES: Black nylon construction. INCLUDES: Four caster spacers           Four caster shims REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Thickness: 2mm (0.08")

39,-

KJØP
Hovedbilde RPM 80475 Rod Ends Short Blue 1/10 Traxxas
RPM 80475 Rod Ends Short Blue 1/10 Traxxas
Short Rod Ends for most Traxxas 1:10 Scale Vehicles Quick Notes: – RPM short rod ends replace Traxxas stock #5347 – requires stock Traxxas pivot balls Description The same engineering that made RPM Rod Ends for Associated and Losi vehicles some our best selling RPM parts for over 2 decades has gone into the creation of RPM Rod Ends for Traxxas 1/10th scale vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash 4×4, Summit, T-Maxx, E-Maxx, Revo, e-Revo, Slayer Pro 4×4, Stampede 4×4, Rustler VXL, Jato and Bandit VXL. Tech Notes: RPM short rod ends replace Traxxas stock #5347. Sold without pivot balls. Stock Traxxas pivot balls are required for completion.    

119,-

KJØP
Hovedbilde RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
RPM Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.  

159,-

Ikke på lager
Hovedbilde Traxxas 4579X Connector Wiring Harness 4570/5270 Revo
Traxxas 4579X Connector Wiring Harness 4570/5270 Revo
 This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems.     This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires           Pre-installed connectors and eyelets INCLUDES: One wire harness           One black connector bracket REQUIRES: Installation onto vehicle equipped with EZ Start or EZ Start 2. COMMENTS: The differences between this and the old design are:  Longer wire            leads, L-shaped motor connectors, and one continuous glow plug wire.

65,-

KJØP
Hovedbilde Traxxas 5349 Rod Ends w/Hollow Balls Small Revo (6)
Traxxas 5349 Rod Ends w/Hollow Balls Small Revo (6)
            This is the Small Rod End Set for the Traxxas Revo. FEATURES: Plastic construction           Black in color           Metal Pivot Balls INCLUDES: Six Rod Ends           Six Pivot Balls REQUIRES: Assembly to vehicle SPECS:    Length:               18mm (.71")           Width at ball joint: 9.5mm (.38")

49,-

KJØP
Hovedbilde Traxxas 5041 Grease Premium High-Performance 20cc ...
Traxxas 5041 Grease Premium High-Performance 20cc ...
Grease, premium high performance (20cc)

159,-

169,-

KJØP
-6%
Hovedbilde Traxxas 7138X Toe links, aluminum (red-anodized) (4) Hovedbilde Traxxas 7138X Toe links, aluminum (red-anodized) (4)
Traxxas 7138X Toe links, aluminum (red-anodized) (4)
These are the optional Aluminum Toe Links for use on the Traxxas 1/16 scale E-Revo VXL ! These are the strongest toe links you can buy for your 1/16 scale Traxxas model. Traxxas aluminum toe links are manufactured from high-grade 6061-T6 aluminum and anodized bright red, and the beefy size tells everyone your truck means business. The broad center nut makes it easy to line up the wrench for fast, trackside tuning. A handy machined groove on one end easily identifies the left hand threads.   Lightweight aluminum turnbuckles Pre-assembled and ready to install!! Anodized red in color INCLUDES: Four Toe Links Eight Hollow Balls One 5mm Wrench SPECS: Length: 86mm (3.4") Diameter: 5mm (0.2")

379,-

KJØP
Hovedbilde Traxxas 5315 Steering Servo Guards Revo (2)
Traxxas 5315 Steering Servo Guards Revo (2)
            These are the replacement Steering Servo Guards for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Nylon Construction           Black in Color INCLUDES: One Left Black Nylon Steering Servo Guard           One Right Black Nylon Steering Servo Guard REQUIRES: Assembly onto Vehicle

49,-

Ikke på lager
Hovedbilde Traxxas 7794 Cush Drive Key/Pin/Elastomer Damper ...
Traxxas 7794 Cush Drive Key/Pin/Elastomer Damper ...
Cush drive key/ pin/ elastomer damper

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

139,-

KJØP
Hovedbilde Traxxas 6552 Seal Kit Telemetry Expander Box
Traxxas 6552 Seal Kit Telemetry Expander Box
Seal kit, expander box (includes o-ring, seals, and silicone grease)

49,-

KJØP
Hovedbilde Traxxas 8638R Toe Link 144mm Alu Red (with Wrench) (2) ...
Traxxas 8638R Toe Link 144mm Alu Red (with Wrench) (2) ...
Toe links, E-Revo® VXL (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 10mm (1)

549,-

599,-

KJØP
-8%
Hovedbilde RPM 80422 Body Savers for Traxxas E-Revo Hovedbilde RPM 80422 Body Savers for Traxxas E-Revo
RPM 80422 Body Savers for Traxxas E-Revo "2.0"
RPM Body Savers for Traxxas E-Revo "2.0" Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #8611, #8611A & #8611G bodies RPM engineers examined a brand new E-Revo 2.0 body and were shocked when they discovered cracks around the body mount holes in the body. This vehicle had never been run and the holes were already weakened. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body for $85! RPM Body Savers for the E-Revo 2.0 are a simple, yet clever solution to solve that problem. We disguise our Body Savers in two separate ways. Out front, they look like molded hood vents while in the rear, they look like exposed sections of a roll cage. It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward; there are two pairs of screws holding the sub-frame of the body mounting system to the body in both the front and rear of the truck. Our Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body (wider than currently available washers too). Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with four Body Savers in each kit (two for the front and two for the rear). Tech Notes: RPM Body Savers only work with Traxxas #8611, #8611A & #8611G bodies. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies

149,-

KJØP
Hovedbilde Traxxas 5473 Wheelie Bar Mount Revo/ E-Revo
Traxxas 5473 Wheelie Bar Mount Revo/ E-Revo
Wheelie Bar Mount Revo/ E-Revo   Wheelie bar mount (1)(fits 1/10 scale Revo trucks)

79,-

KJØP
Hovedbilde Traxxas 6487R Gear, 15-T pinion (machined) (1.0 metric ...
Traxxas 6487R Gear, 15-T pinion (machined) (1.0 metric ...
Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ... Hovedbilde Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...
Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...
Traxxas 30WT/350cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 30WT (350cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Hovedbilde Traxxas 5131R Suspension Arms Upper Maxx (2)
Traxxas 5131R Suspension Arms Upper Maxx (2)
Disse passer for Begge E-Maxx`ene og T-Maxx 3.3. These are the Upper Suspension Arms for the T-Maxx 3.3. FEATURES: Fastens to bulkhead and helps to support axle carriers           Black in color, constructed of hardened plastic INCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3 REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only.

89,-

KJØP
Hovedbilde Traxxas 3655X Suspension Arms Left & Right Slash 4x4
Traxxas 3655X Suspension Arms Left & Right Slash 4x4
This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Front or rear application INCLUDES: One left suspension arm           One right suspension arm REQUIRES: Installation on suspension assembly SPECS:    Length: 100mm (3.94")           Width: 45mm (1.77")           Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 6877A Clear Gear Cover Slash 4X4
Traxxas 6877A Clear Gear Cover Slash 4X4
This is the optional Clear Gear Cover for use on the Traxxas Slash 4x4. FEATURES: Plastic construction           Clear in color INCLUDES: One Clear Gear Cover REQUIRES: Installation on the vehicle

55,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png