Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas Nitro-Biler / Nitro 4-tec 3.3 2,4 GHz / Traxxas 4336 Steering Blocks 4-Tec (2)

Traxxas 4336 Steering Blocks 4-Tec (2)

Art.nr: TRX 4336

49,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a pair of the Steering Blocks for the Traxxas Nitro
and Electric Powered 4-Tec Touring Cars.
These Blocks support the Wheel Hubs and connect to the
Front Suspension Arms and Steering Tie Rods.

FEATURES

Constructed of high impact plastic
Replaces worn or damaged Steering Blocks

INCLUDES

Two Steering Blocks for the Traxxas Nitro and Electric Powered 4-Tec
Touring Cars with four metal inserts.
All are Key #4336

REQUIREMENTS

Inserting two 5mm x 10mm ball bearings, fastening
to Front Suspension Arms TRX 4831, and Tie Rods TRX 4841

COMMENTS

For the optional aluminum version, order TRX 4336X

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ... Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ... Hovedbilde Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ...
Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ...
Disse lagerene er samme størrelse som Tamiya 850 Yeah Racing RC PTFE Bearing (5x8x2.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011BS/10) RC Telfon Bearing (5x8x2.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 3147X Fuel line (610mm or 2ft)
Traxxas 3147X Fuel line (610mm or 2ft)
  Fuel line (610mm or 2ft)

49,-

59,-

KJØP
-17%
Hovedbilde LouiseRC 3277B Tire & Wheel MT-ROCK 3,8
LouiseRC 3277B Tire & Wheel MT-ROCK 3,8" Black ...
  0-OFFSET - 4WD FRONT & REAR Fits: Traxxas E-MAXX Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas E-REVO Brushless Front & Rear Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear HPI SAVAGE X 4.6 Front & Rear HPI TROPHY Flux 4WD Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Flux Front & Rear Kyosho Psycho Kruiser 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes - 5353X, 5353G & 5353R: Traxxas E-Maxx Front & Rear  Traxxas E-Maxx Front & Rear  Traxxas E-REVO Front & Rear  Traxxas E-REVO Front & Rear  Traxxas T-Maxx 3.3 Front & Rear  Traxxas T-Maxx 3.3 Front & Rear  Traxxas T-Maxx 3.3 Front & Rear  Specs: Wheel diameter: 3.8" Tire Diameter: 171 mm Tire Width: 109 mm Weight (each): 428 g Hex: 17 mm Offset: 0" Tire Compound: Sport Wheel finish: Black Nylon

579,-

599,-

KJØP
-3%
Hovedbilde Traxxas 5245X Pipe Coupler(Blk)/Exhaust Deflector/Ties ...
Traxxas 5245X Pipe Coupler(Blk)/Exhaust Deflector/Ties ...
  This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo. FEATURES: Black rubber construction   INCLUDES: One black coupler           One black exhaust deflector           Two 7" (178mm) zip ties           Two 3" (76mm) zip ties   REQUIRES: Installing between tuned pipe and exhaust header

49,-

KJØP
Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 4851 Drive Shafts Telescopic
Traxxas 4851 Drive Shafts Telescopic
  These are Replacement Drive-Shafts by Traxxas. FEATURES: Black Plastic Construction. INCLUDES: Two external-splined           Two internal-splined           Four metal U-joints REQUIRES: Installation onto kit

75,-

Ikke på lager
Hovedbilde Traxxas 3631X Suspension Arms Front HD Black (2) Hovedbilde Traxxas 3631X Suspension Arms Front HD Black (2)
Traxxas 3631X Suspension Arms Front HD Black (2)
Suspension arms, front (black) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Accessory part for these models (front): Rustler Rustler VXL Stampede Stampede VXL Bigfoot Slash Slash VXL Ford F-150 Raptor

119,-

KJØP
Hovedbilde Traxxas 4332 Susp.arm 4-Tec Upper
Traxxas 4332 Susp.arm 4-Tec Upper
Control arms, upper (2)/ upper rod ends (with ball joints installed) (2)/ 4x20mm set (grub) screws (2)

75,-

KJØP
Hovedbilde RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD
RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

179,-

KJØP
Hovedbilde Traxxas 4341 Tie-Rod Set 4-Tec (8)
Traxxas 4341 Tie-Rod Set 4-Tec (8)
This is the Replacement Tie-Rod Set for the Traxxas 4-Tec.  This set includes Steering and Camber Links.     FEATURES Black nylon rod ends  Steel studs   INCLUDES Eight rod ends  Eight 5.8mm studs  Four 18mm threaded rods   REQUIREMENTS Installation onto 4-Tec

89,-

KJØP
Hovedbilde Traxxas 5151 Half Shafts Center
Traxxas 5151 Half Shafts Center
This is the Center Halfshaft Set for the Traxxas T-Maxx 3.3 RTR.   FEATURES Constructed of hardened composite material with steel U-joints  Center front and center rear driveshaft assemblies   INCLUDES Two external splined halfshafts  Two internal splined halfshafts  Four metal U-joints   REQUIREMENTS Installing between transmission and differentials   SPECIFICATIONS  Rear Internal Splined Halfshaft Length: 1.6" (40.5mm)  Front Internal Splined Halfshaft Length: 2" (51mm)  Front and Rear External Splined Halfshaft Length: 1.57" (40mm)   COMMENTS These halfshafts are specific to the 3.3 T-Maxx and will not fit in  any other version.

99,-

KJØP
Hovedbilde Traxxas 4928X Diff Output Yokes w/Screw Yoke Pins 2.5 ...
Traxxas 4928X Diff Output Yokes w/Screw Yoke Pins 2.5 ...
 These are the optional Differential Output Yokes        for the T-Maxx and E-Maxx and the newer 2.5 T-Maxx from Traxxas. FEATURES: Features thicker plastic for long life and durability.           These diff yokes are more rigid than the stock yokes.           Black in color.   INCLUDES: Two heavy duty diff yokes           Two yoke mounting shafts   REQUIRES: Assembly onto the truck.

59,-

KJØP
Hovedbilde Traxxas 4955 Axle Pins T-Maxx (4)
Traxxas 4955 Axle Pins T-Maxx (4)
 This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.              These pins go through the stub axles on each wheel,                the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins           Axle pins are steel   INCLUDES: Four 2.5x12mm axle pins   REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs             (4954) over pins.    

19,-

KJØP
Hovedbilde Traxxas 4881 Differential Side Cover & Screws
Traxxas 4881 Differential Side Cover & Screws
This is the Differential Pulley and Side Cover for the Traxxas Nitro 4-Tec. FEATURES: Plastic construction           Black in color INCLUDES: One differential pulley           One differential side cover           Four 3x10mm self tapping flat head screws REQUIRES: None, item is a stock replacement part. SPECS:    Number of teeth: 34           Overall diameter: 31.5mm (1.24") COMMENTS: If planetary gears are needed, use TRX 2382

59,-

KJØP
Hovedbilde Traxxas 4579 EZ-Start Quick Connector
Traxxas 4579 EZ-Start Quick Connector
This is the stock replacement Quick Connector set for the Traxxas EZ Start. FEATURES: All wires included in an EZ starting system INCLUDES: One complete Wire Set with connectors           Two zip ties           One adhesive foam pad REQUIRES: The remainder of the EZ Starting system. COMMENTS: This does not include the connector and box which attaches to the             7.2V battery pack for use on the EZ starting system.

69,-

79,-

KJØP
-13%
Hovedbilde Traxxas 4147X Nuts Flanged Alum Bl-Anodizd 5mm T-Maxx ...
Traxxas 4147X Nuts Flanged Alum Bl-Anodizd 5mm T-Maxx ...
These are 5mm Nylon Locknuts by Traxxas. FEATURES: Blue anodized aluminum construction.           Nylon inserts. INCLUDES: Four 5mm locknuts. SPECS:    Thickness: 4.95mm (.195")

75,-

KJØP
Hovedbilde Traxxas 4318 Differential Housing 4-Tec
Traxxas 4318 Differential Housing 4-Tec
This is the Stock Replacement Differential Housing for the Traxxas                    Electric and Nitro 4-Tec Touring Cars. FEATURES: Black nylon construction INCLUDES: One front diff cover and housing           One front shock tower REQUIRES: Installation onto vehicle. SPECS:    Length of diff cover: 55mm (2.18")           Length of shock tower: 52mm (2.06")

75,-

KJØP
Hovedbilde Traxxas 4317 Rear Shock Tower 4-Tec
Traxxas 4317 Rear Shock Tower 4-Tec
This is the Rear Shock Tower for the Traxxas Nitro and Electric                     4-Tec Four Wheel Drive On-Road Sedan.       This shock tower fastens to the Rear Side Plates TRX 4824                  and supports the top section of each shock. FEATURES: Replaces damaged shock towers.           Constructed of hardened plastic.           Two mounting holes per side for different damping rates. INCLUDES: One Rear Shock Tower for the Traxxas Nitro and Electric 4-Tec Four             Wheel Drive On-Road Sedan. REQUIRES: Fastening to side plates with four 3mm x10mm countersunk machine             screws. Attaching top section of shocks with 3mm x 20mm             countersunk machine screws. SPECS:    Width:     3.36" (85mm)           Height:    1.96" (50mm)           Thickness: 0.24" (6mm)

45,-

KJØP
Hovedbilde Traxxas 5263 Foam Air Filter Oil 1.75 oz.
Traxxas 5263 Foam Air Filter Oil 1.75 oz.
This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES: Used to treat foam air filter elements to increase their filtering             capacity, and extend engine life.           1.75 fluid ounce bottle provides oil for many applications, and is             still small enough to fit easily into a field bag or tool box. INCLUDES: One 1.75 oz bottle of Air Filter Oil           One applicator tip REQUIRES: Working oil into foam air filter element and squeezing out the excess SPECS:    Fluid Ounce: 1.75 oz (50cc)           Bottle Size-            Height:   3.5" (89mm)            Diameter: 1.5" (38mm)

69,-

Ikke på lager
Hovedbilde RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 3639 Shock Tower Front
Traxxas 3639 Shock Tower Front
This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Height: 2 3/4"    Thickness: 1/4"    Width at base: 2 3/4"    Width at top: 2" INCLUDES:    (1) Front shock tower for the Traxxas Stampede

59,-

KJØP
Hovedbilde Traxxas 3232X Super Duty Long Glow Plug
Traxxas 3232X Super Duty Long Glow Plug
This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

119,-

139,-

Ikke på lager
-14%
Hovedbilde Traxxas 4352 Rear Hub Carriers 1.5 Degree 4-Tec
Traxxas 4352 Rear Hub Carriers 1.5 Degree 4-Tec
These are the stock replacement stub axle carriers for the Traxxas                   Electric and Nitro 4-TEC touring cars. FEATURES: Black nylon construction INCLUDES: Two Axle Carriers REQUIRES: Assembly into Traxxas 4-TEC (Nitro or Electric) SPECS:    Suspension arm mount width: 14.4mm (.57")           Bearing size hole: 11mm           Height: 42mm (1.65")           Toe in angle: 1.5° COMMENTS: To prevent confusion, the axle carriers are stamped L and R            The rear axles ride in these.

39,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png