Traxxas

Traxxas 4124 Clutch Bell Steel 24T

Art.nr: TRX 4124

149,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the Traxxas 24 Tooth Steel Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.

FEATURES

Fits all Traxxas 1/10 scale nitro vehicles including the 3.3 version of the T-Maxx

Constructed of hardened steel

INCLUDES

One Traxxas 24 Tooth Steel Clutch Bell

Two 5mm x 8mm 0.5mm fiber washers

Two 5mm E-clips

REQUIREMENTS

Disassembly of flywheel, clutch shoes, and adapter unit.

Two 5mm x 11mm bearings

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Hpi Racing 86369 Clutch Hub (Savage Heavy Duty 2 Spee)

Hpi Racing 86369 Clutch Hub (Savage Heavy Duty 2 Spee)

Spare parts for Savage HD 2 Speed transmission gear (#87227) Spare part for the HPI #87227 Heavy-Duty Transmission Gear 39T for all Savage 2 speed transmissions.

69,-

Hovedbilde Traxxas 4146X Clutch Shoes/Spring T-Maxx

Traxxas 4146X Clutch Shoes/Spring T-Maxx

These are Replacement Clutch Shoes for the Traxxas T-Maxx. These mount to the flywheel and engage the clutch. FEATURES: Carbon Construction Black in Color INCLUDES: Two Clutch Shoes One Spring REQUIRES: Assembly into the clutch system.

95,-

Hovedbilde Traxxas 4579X Connector Wiring Harness 4570/5270 Revo

Traxxas 4579X Connector Wiring Harness 4570/5270 Revo

This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires Pre-installed connectors and eyelets INCLUDES: One wire harness One black connector bracket REQUIRES: Installation onto vehicle equipped with EZ Start or EZ Start 2. COMMENTS: The differences between this and the old design are: Longer wire leads, L-shaped motor connectors, and one continuous glow plug wire.

65,-

Hovedbilde Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx

Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx

This is the Glow Plug Lead Wire for the T-Maxx Truck Kit. This wire that is attached to the glow plug that heats it while starting. FEATURES: This is a blue silicone wire. It has one bullet connector soldered on one end of wire. INCLUDES: One blue glow plug lead wire with bullet connector. COMMENTS: Designed for use only with the EZ Start System.

29,-

Hovedbilde Traxxas 6542 Flywheel 35mm with Sensor Magnet

Traxxas 6542 Flywheel 35mm with Sensor Magnet

Flywheel 35mm with Sensor Magnet

99,-

Hovedbilde Traxxas 5360 Engine mount 3x28mm CS with washers (2)/ ...

Traxxas 5360 Engine mount 3x28mm CS with washers (2)/ ...

Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)

239,-

Hovedbilde Traxxas 5340 Aluminum Exhaust Header Silver Revo

Traxxas 5340 Aluminum Exhaust Header Silver Revo

This is the Aluminum Exhaust Header for the Traxxas Revo. FEATURES Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange INCLUDES One Exhaust Header REQUIREMENTS Assembly to vehicle SPECIFICATIONS Length: 59mm (2.32") Pipe diameters: Outside-13mm (.52") Inside -10mm (.40") Width between engine exhaust mount holes: 22mm (.866")

249,-

Hovedbilde Traxxas 3281 Cone Split Beveled

Traxxas 3281 Cone Split Beveled

Replacement SPLIT BEVEL CONE for the Traxxas Nitro Vee Boat. This cone is part of the engine assembly. INCLUDES 1-Beveled Cone FEATURES Black steel construction Beveled cone shape with split on one side COMMENTS Beveled cone sits in front of the flywheel

39,-

Hovedbilde Traxxas 5274 Back Plate w/Starter Traxxas 2.5

Traxxas 5274 Back Plate w/Starter Traxxas 2.5

This is the Replacement Backplate for the Traxxas 2.5 engine. This backplate is used on the 2.5 equipped with EZ starter. FEATURES Aluminum construction. INCLUDES One backplate with pre-installed bushing. REQUIREMENTS Installation onto 2.5 engine. SPECIFICATIONS Length: 32mm (1.26") Width: 32mm (1.26")

149,-

Hovedbilde Traxxas 5224 Connecting Rod Traxxas 2.5 and 3.3

Traxxas 5224 Connecting Rod Traxxas 2.5 and 3.3

This is the Connecting Rod for the Traxxas 2.5 and 3.3 Engine. This part connects the piston to the crankshaft. FEATURES Aluminum construction Pre-installed bushing INCLUDES One connecting rod REQUIREMENTS Installation into engine. SPECIFICATIONS Length: 37mm (1.46") Thickness: 3mm (0.12")

399,-

449,-

-11%

Hovedbilde Traxxas 5242 Dust Boot Carburetor TRX 2.5/ TRX 3.3 (2)

Traxxas 5242 Dust Boot Carburetor TRX 2.5/ TRX 3.3 (2)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

49,-

59,-

-17%

Hovedbilde Traxxas 5290 Piston & Sleeve TRX 3.3

Traxxas 5290 Piston & Sleeve TRX 3.3

Piston/sleeve (matched set), wrist pin clips(2) (TRX 3.3)

849,-

899,-

-6%

Hovedbilde Traxxas 5291 Wrist Pin TRX 3.3

Traxxas 5291 Wrist Pin TRX 3.3

Wrist pin, wrist pin clips (2) (TRX 3.3)

49,-

59,-

-17%

Hovedbilde Traxxas 5591 Left & Right Gearbox Halves Jato

Traxxas 5591 Left & Right Gearbox Halves Jato

These are the Left and Right Gearbox Halves for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction Black in color INCLUDES: One Left Gearbox Half One Right Gearbox Half REQUIRES: Assembly onto Vehicle

69,-

79,-

-13%

Hovedbilde Traxxas 5116 Ball Bearings 5x11x4mm Revo (2)

Traxxas 5116 Ball Bearings 5x11x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS: Inside diameter: 3/16" (5mm) Outside diameter: 7/16" (11mm) Width: 5/32" (4mm)

49,-

55,-

-11%

Hovedbilde Traxxas 2277 Gear Set Metal for Servo 2275

Traxxas 2277 Gear Set Metal for Servo 2275

Traxxas 2277 Gear Set Metal for Servo 2275 Gear set, metal (for 2275 servo)

209,-

Hovedbilde Traxxas 5540 Exhaust Header Jato

Traxxas 5540 Exhaust Header Jato

This is the Exhaust Header for the Traxxas Jato. FEATURES Constructed of aluminum, silver in color INCLUDES One Exhaust Header for the Traxxas Jato REQUIREMENTS Attaching to engine and rubber coupler SPECIFICATIONS Distance between mounting holes: 0.87" (22.2mm) Diameter: 0.51" (13mm)

239,-

Hovedbilde Traxxas 5567 Brake Cam Lever Jato

Traxxas 5567 Brake Cam Lever Jato

This is the Brake Cam Lever for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction Black in color INCLUDES: One Brake Came Lever One Linkage Brake Bellcrank One Brake Bellcrank Rod REQUIRES: Assembly onto Vehicle

39,-

Hovedbilde Traxxas 5584 Wheelie Bar Jato 3.3

Traxxas 5584 Wheelie Bar Jato 3.3

This is the optional Wheelie Bar for the Traxxas Jato 3.3. FEATURES: Black plastic construction One inch wheels INCLUDES: One assembled wheelie bar Four 4X6mm Button Cap Screws REQUIRES: The Jato model 5510 requires installation of batt box part #5515X which includes the bosses necessary for installation of the wheelie bar. SPECS: Length: 4.4" (112mm) Width: 2.8" ( 71mm) Height: 1.1" ( 28mm) Wheel diameter: 1" (26mm)

125,-

Hovedbilde Traxxas 5119 Ball Bearings 10x15x4mm Revo (2)

Traxxas 5119 Ball Bearings 10x15x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Side Thickness: 4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed). Tamiya 630 3X6X2.5mm Tamiya 730 3X7X3mm Tamiya 840 4X8X3mm Tamiya 850 5X8X2.5mm Tamiya 1050 5X10X4mm Tamiya 1060 6X10X3mm Tamiya 1150 5X11X4mm Tamiya 1260 6X12X4mm Tamiya 1280 8X12X3.5mm Tamiya 1480 8x14x4mm ??? Tamiya 1510 10X15X4mm Tamiya 1680 8X16X5mm

89,-

99,-

-10%

Hovedbilde Traxxas 1926 Vinyl Caps/Antenna Spool

Traxxas 1926 Vinyl Caps/Antenna Spool

This is a set of TRAXXAS receiver tube caps and a spool that could be used for any receiver antenna tubes. FEATURES: Caps are yellow plastic. Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps One spool

25,-

Hovedbilde Traxxas 5521 Front & Rear Suspension Pin Set Jato

Traxxas 5521 Front & Rear Suspension Pin Set Jato

This is the Front and Rear Suspension Pin Set for the Traxxas Jato. FEATURES: Constructed of steel, 1/16" (3mm) in diameter Holds suspension arms in place INCLUDES: Four 1.1" (27mm) pins Four 2.04" (52mm) pins Two 1.4" (35mm) pins REQUIRES: Inserting through suspension arms, mounts and stub axles

99,-

Hovedbilde Traxxas 5514 Front Body Mount Jato

Traxxas 5514 Front Body Mount Jato

This is the Front Body Mount for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction Black in color INCLUDES: One Front Body Mount REQUIRES: Assembly onto Vehicle

45,-

Hovedbilde Traxxas 3957 Spur Gear 0.8P 56T

Traxxas 3957 Spur Gear 0.8P 56T

This is the 56 Tooth Spur Gear. FEATURES: Nylon construction Black in color .8 metric pitch INCLUDES: One 56T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

Hovedbilde Traxxas 1834 Body Clips (12)

Traxxas 1834 Body Clips (12)

Disse passer Traxxas 1/16 biler. These are Replacement Traxxas Body Clips. They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS: Length: aprrox. 7/8"

25,-

35,-

-29%