Traxxas

-20%

Traxxas 4061 Air Filter Nitro

Art.nr: TRX 4061

39,-

~~49,-~~

- 20%

Traxxas

Traxxas

** Ikke på lager

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the Replacement Air Filter Element for the Traxxas Nitro Stampede.This element is located in the rubber air filter body.

FEATURES

Pre-oiled

INCLUDES

One air filter element.

REQUIREMENTS

Nothing. This is a direct replacement part.

SPECIFICATIONS

Diameter: 30mm (1.18")

3Height: 17.5mm (0.69")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde ZAP PT31 AFTER RUN 2 OIL

ZAP PT31 AFTER RUN 2 OIL

Det er viktig å bruke After Run Oil i glow motorer etter bruk. Dette hindrer korrosjon og rust i blant annet kulelagere. Fra produsenten: Use AFTER RUN after every run. Most fuels we use for our models do a good job of protecting your engine while it is running, however some of the chemicals used in our fuels are corrosive. These chemicals and what they can leave behind are the main reason why our engines rust and corrode when stored, even for short periods. Adding AFTER RUN to your engine protects all of the internal parts. Since AFTER RUN is a concentrated high tech corrosion inhibitor, it will last or months. Use AFTER RUN in your chain saw and weed whacker engines when storing for the winter. Wipe down metal parts and surfaces to prevent corrosion, great for all tools left in a garage or shed. Use on bike chains and cables. Coat metal push rods for use in plastic or nylon sleeves. Helpful Hints: Add AFTER RUN to your engine by placing a few drops in the carb air intake for a small engine, add more for larger engines, then turn the engine over by hand 6 to 10 times to coat all of the internal parts. AFTER RUN is safe for use on all metals and will not harm plastics. Wipe up any excess AFTER RUN with a water dampened cloth. To free up sticky engines, add a few drops of AFTER RUN, turn over by hand several times and let the engine sit overnight DIRECTIONS: After running engine, simply put a few drops in the engines carb or glow plug port and turn engine by hand a few times. This coats the internal engine parts and protects them from corrosion.

99,-

Hovedbilde Traxxas 8933 Bumper Mount Front Maxx

Traxxas 8933 Bumper Mount Front Maxx

Bumper Mount Front Maxx

59,-

Hovedbilde Traxxas 8944 Skidplate Front + Rear Maxx

Traxxas 8944 Skidplate Front + Rear Maxx

Skidplate, front (1), rear (1)

99,-

Hovedbilde Traxxas 2535 Countersunk Hex Screw 4x10mm Jato (6)

Traxxas 2535 Countersunk Hex Screw 4x10mm Jato (6)

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

35,-

Hovedbilde Traxxas 5148 Grease White Lithium

Traxxas 5148 Grease White Lithium

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES: Great lubrication for nylon gears INCLUDES: One tube of lithium grease (volume unknown) REQUIRES: Application to parts needing lubrication.

39,-

Hovedbilde Traxxas 3193 Screw M3x10 (6) Washerhead

Traxxas 3193 Screw M3x10 (6) Washerhead

Screws, 3x10mm washerhead machine (6)

19,-

Hovedbilde Traxxas 5001 Top Fueler Fuel Bottle 500cc

Traxxas 5001 Top Fueler Fuel Bottle 500cc

This is the Traxxas Top Fueler 500cc Glow Fuel Bottle. Can be used with any glow fuel. FEATURES Clear plastic 500cc capacity bottle Blue anodized aluminum spout INCLUDES One Fuel Bottle One fuel bottle spout with black plastic cap REQUIREMENTS Filling with glow fuel. SPECIFICATIONS Capacity: 500 cubic centimeters (500ml) COMMENTS The bottle is labeled Traxxas Top Fueler in red print.

99,-

Hovedbilde Traxxas 5170 Recoil Starter TRX 2.5

Traxxas 5170 Recoil Starter TRX 2.5

This is the Recoil Starter for the 2.5 and 3.3 Traxxas engines. FEATURES Black plastic case INCLUDES One Recoil Starter Four 3mm x 12mm cap head screws REQUIREMENTS 2mm Allen Wrench SPECIFICATIONS Mounting Holes center-to-center: 27mm COMMENTS This part is for the recoil unit only Screws have thread-locking compound pre-applied

269,-

Hovedbilde Dubro 341 Fuel Filter Large

Dubro 341 Fuel Filter Large

This is Large In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 3.2-4 mm (1/8"-5/32") id tubing. INCLUDES One large In-Line Fuel Filter REQUIREMENTS 3.2-4 mm (1/8"-5/32") id fuel tubing SPECIFICATIONS Length: 28 mm Width: 14.3 mm

109,-

119,-

-8%

Hovedbilde Mstyle E60WP Waterproof Electronic Speed Control (ESC)

Hovedbilde Mstyle E60WP Waterproof Electronic Speed Control (ESC)

Mstyle E60WP Waterproof Electronic Speed Control (ESC)

Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC) Item no. 542408 The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries. Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 60A Forward Burst Current: 360A Reverse Continuous Current: 230A Reverse Burst Current: 180A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36.5x32x18mm Weight: 39g

399,-

449,-

-11%

Hovedbilde Yeah Racing YBS-0071 Steel Bearing Set (28pcs) Top ...

Hovedbilde Yeah Racing YBS-0071 Steel Bearing Set (28pcs) Top ...

Yeah Racing YBS-0071 Steel Bearing Set (28pcs) Top ...

Yeah Racing YBS-0071 Steel Bearing Set (28pcs) For Tamiya Top Force EVO 2021 Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars! Feature: For : Tamiya Top Force EVO 2021 Material : Bearing Steel Shielding: Rubber Specification: YB6006B (3x7x3mm) (2 pcs) YB6011B (5x8x2.5mm) (10 pcs) YB6014B (5x11x4mm) (16 pcs) Include: Total Bearing (28 pcs)

249,-

289,-

-14%

Hovedbilde Jperkins Fuel Filter Deluxe With Mount (Sintered)

Jperkins Fuel Filter Deluxe With Mount (Sintered)

Hard anodisert fuel filter med feste. Sintret bronse sil.

89,-

99,-

-10%

Hovedbilde HPI Racing nano-TTR 1969 Ford Mustang RTR

Hovedbilde HPI Racing nano-TTR 1969 Ford Mustang RTR

HPI Racing nano-TTR 1969 Ford Mustang RTR

Nano-TTR! Small but Mighty! Featuring the Legendary RTR-X! It may be small, but don’t let its size fool you – the official 1:64 scale RC replica of Vaughn Gittin Jr.'s RTR-X is packed with attitude! Developed in collaboration with Vaughn Gittin Jr. and the Need for Speed crew, the full-size RTR-X is a one-of-a-kind, fully functional street, track, and drift machine. And now, you can experience all that excitement in miniature form with this fully functional HPI Racing RC version! Powered by 5.0 liters of tire-shredding American muscle, the RTR-X blends vintage American, Japanese, European, and drift-inspired aesthetics. Vaughn Gittin Jr. has skillfully infused state-of-the-art technology into the 1969 Ford Mustang body, all while maintaining that nostalgic, timeless look. The RTR-X was designed from the ground up to be driven hard, proving it's no trailer queen. While Vaughn will be the one behind the wheel in real life, you can live out the dream with the HPI nano-TTR 1/64th scale Ford Mustang RTR-X! The nano-TTR is an in-house, custom-built and designed chassis, fully assembled and ready to roll. Featuring a detailed, fully licensed hard-body replica of the Ford Mustang RTR-X, the nano-TTR is designed to offer the perfect balance of fun and performance in Tiny scale! Includes a full-size 2.4GHz control system with all the usual adjustment settings, offering smooth handling and responsiveness. Enjoy fully working LED lights – headlights, tail lights, reverse lights, and turn signals – all controllable directly from the transmitter. Plus, just like the Venture18, you can toggle them on/off, and even turn off the signal lights with a simple press of a button! With a high-capacity LiPo battery providing an impressive 45 minutes of runtime, you'll have plenty of time to sharpen your skills, whether you're racing on the tabletop or just having fun around the house. Official Replica of the Amazing RTR-X The nano-TTR features a pre-painted hard body 1969 Ford Mustang RTR-X muscle car body with authentic detailing. The body comes mounted to the nano-TTR chassis for the ultimate in ease. You'll have concours quality appearance, and you can always customize your own nano-TTR with one of the unpainted body packs! UNIQUE BODY MOUNTING SYSTEM The nano-TTR features an innovative Body Mounting System that makes swapping the body a breeze. Designed for ease and efficiency, the chassis allows you to securely mount and remove the bodyshell with just two screws. No fuss, no hassle—just pure convenience. Stay tuned for more officially licensed replicas coming soon! FULLY FUNCTIONING FRONT LIGHTS WITH TURN SIGNALS The nano-TTR, features a fully functional LED light set that’s directly controllable from your transmitter! The nano-TTR offers 3 distinct light modes out of the box, all easily cycled through with a simple push of a button on the transmitter. From Day Mode, Day Mode (No Signals) and Night Mode for full illumination, the nano-TTR has you covered in any lighting condition. FUNCTIONING BRAKE LIGHTS WITH TURN SIGNALS The brake and reverse lights illuminate automatically when used, and signal lights can also be Off or On. When your battery requires charging, the nano-TTR will let you know by turning on the Hazards! Pre-mounted SPEC-GRIP tires! No HPI Racing touring car would be complete without a set of SPEC-GRIP treaded rubber tires, designed to deliver maximum grip on nearly any surface you can race a 1:64th scale car on. These semi-slick, high-traction tires provide excellent acceleration, braking, and cornering performance. Made from a durable, long-lasting rubber compound, they’re built to keep you enjoying hours of racing fun. Plus, they’re mounted on replica WORK MEISTER S1 Green wheels, just like the full-sized version! Long-Lasting Fun Powering this tiny powerhouse is a replaceable 58mAh LiPo battery that delivers an impressive 45 minutes of runtime between charges, so you can keep the action going longer without interruptions. Whether you're tearing through the kitchen or putting it through its paces in your living room, the nano-TTR keeps you in the driver’s seat for hours of fun and excitement. Custom-Built Precision in a Tiny Package The nano-TTR is a true in-house, bespoke creation—custom-built and designed with precision to deliver the ultimate RC experience. Fully assembled and ready to roll right out of the box, this 2WD chassis is engineered for both fun and performance in a compact 1:64th scale. Featuring Real Steer, you get full control in any situation! Easy USB-C Charging Charging your nano-TTR is a breeze with the included USB to USB-C cable. Simply plug it into any USB 2A output port, and you’re ready to go. Fast, convenient, and hassle-free—just power up and get back to the action! MTX-400 2.4GHz RADIO SYSTEM Features: 4 Channel Servo Reverse, EPA, Trims and Dual Rate switches. Foam-covered wheel for extra comfort and grip Light, modern design Digital on and off switch Audible warnings for low power and idle time! The nano-TTR is also cross-compatible with the HPI Racing TF-51 controller if you want even more features! MYhpi: The Ultimate Resource For your nano-TTR Once you've got your nano-TTR, you'll be able add it to your MYhpi garage. Add your entire HPI collection to your MYhpi garage so you can directly access manuals, videos, tips and help for each of your HPI cars! Download the Free nano-TTR poster Here! Brighten up your RC workspace with a FREE poster featuring the nano-TTR! Just click here to download it, then print it out or use it as your tablet or computer wallpaper! Features Factory-assembled & pre-painted electric-powered 2WD 1/64 scale touring car! Hand-finished, officially licensed Ford Mustang RTR-X Hard-Body replica Unique Clipless body mounting for 1:64th Scale Fully Licensed Replicas. Fully proportional “Real Steer” is back! 45 minutes of Runtime! Tiny 1:64th WORK MEISTER S1 Wheels! With matching HPI-Racing SPEC-GRIP Treaded Tires! Fully working LED Lights, including Headlights, Tail lights, Reverse lights and Signal lights Plus: Just like the Venture18, you can turn them On and Off and turn Off the Signal lights right from the Transmitter! USB Charge cable included in RTR HPI MTX-400 2.4GHz radio system Includes 58mAh 3.6V LiPo battery Specification DIMENSIONS Length: 70mm Width: 32mm Height: 22mm Wheelbase: 42mm WEIGHT Running weight: 22g Nano-TTR Ford Mustang RTR-X WHAT YOU NEED: 2A USB power supply 4 x AA batteries for the transmitter

895,-

995,-

-10%

Hovedbilde Absima 400CPS / 34WT Silicone Shock Oil 60ml

Absima 400CPS / 34WT Silicone Shock Oil 60ml

Features: Viscosity 400CPS / 34WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

Hovedbilde M-Drive Glow Starter with Meter for Sub-C battery

Hovedbilde M-Drive Glow Starter with Meter for Sub-C battery

M-Drive Glow Starter with Meter for Sub-C battery

M-Drive MD70200 - Glow Starter with Meter for Sub-C Battery (Battery not included) This is a glow starter with aluminium case suitable for most methanol/nitro glow engines. Specs: Battery Size: Sub-C/SC NiMH (sold separately) Length (total): 148mm Diameter: 26.5mm Weight: 61.5g (without battery) Not included - Sold separately: Sub-C NiMH battery cell Charging wire Charger

359,-

379,-

-5%

Hovedbilde Tamiya 51673 TYPE 540-N MOTOR

Tamiya 51673 TYPE 540-N MOTOR

Informasjon på engelsk: Use this motor as a spare for Tamiya kits that include brushed 540-size motors. It’s a genuine replacement motor that offers optimum balance of power and efficiency, plus superior durability. • The Type 540-N Motor can be used as a standard motor. • The use of kit-included pinion gears is recommended. • Input voltage: 7.2V – 8.4V • RPM (without load): 13,800 • Maximum torque: 283gf/cm (at 7.2V) • Current consumption: 8.1A (at 7.2V)

159,-

169,-

-6%

Hovedbilde Gens Ace 7.2V 3000mAh - NiMh - Tamiya

Hovedbilde Gens Ace 7.2V 3000mAh - NiMh - Tamiya

Gens Ace 7.2V 3000mAh - NiMh - Tamiya

Gens Ace NiMh batteripakke på 7,2V og 3000mAh med Tamiya kontakt. Type NiMh Spenning 7,2V Kapasitet 3000mAh Kontakt Tamiya Ledninger 14AWG Lengde 138mm Bredde 48mm Høyde 25mm Vekt 360g

319,-

Hovedbilde Team Orion 30197 Advantage IQ801 NiMh Charger

Team Orion 30197 Advantage IQ801 NiMh Charger

The Advantage IQ801 is an easy to use NiMH battery charger. Plug it into the wall, connect the battery to the battery connector, wait for the LED to go out and you are done. Compact charger for NiMH batteries For batteries with 4-8 cells 1A charge current Tamiya plug

199,-

Hovedbilde Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10

Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10

QuicRun 1060, 60A børsteregulator som er vann og støv beskyttet. Passer til de fleste 1:10 biler med børsteoppsett, leveres med Tamiya batterikontakt og programmeres enkelt via jumper. Kan brukes med 2-3s LiPo eller 7,2V - 10,8V NiMh batterier. Størrelse 35,5 x 32,18 x 18mm Vekt 39g

389,-

429,-

-9%

Hovedbilde Tamiya 81775 Acrylic Mini XF-75 IJN Gray Kure Arsenal ...

Tamiya 81775 Acrylic Mini XF-75 IJN Gray Kure Arsenal ...

This is a Jar of Tamiya Color Acrylic Paint Mini XF-75 IJN Gray Kure Arsenal. For Adult Modelers Age 14 & Older. FEATURES: Handy paint for hobby use Made from water-soluble acrylic resins and is completely safe Can be used on most common model plastics such as styrol resin and styrofoam Can be washed away with plain water prior to curing Glass jar with a plastic, color coded, screw-on lid INCLUDES: (1) Jar of Acrylic Paint Mini XF-75 IJN Gray Kure Arsenal REQUIRES: Stir Stick SPECS: Volume: 10ml (1/3 fl oz)

30,-

Hovedbilde Tamiya 81715 Acrylic Mini XF-15 Flat Flesh 1/3 oz

Tamiya 81715 Acrylic Mini XF-15 Flat Flesh 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Flesh paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

35,-

Hovedbilde Tamiya 81701 Acrylic Mini XF-1 Flat Black 1/3 oz

Tamiya 81701 Acrylic Mini XF-1 Flat Black 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Black paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

29,-

39,-

-26%

Hovedbilde Tamiya 81518 Acrylic Mini X-18 Semi Gloss Black 1/3 oz

Tamiya 81518 Acrylic Mini X-18 Semi Gloss Black 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Semi Gloss Black paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured.

30,-

Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz

Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

-8%

Hovedbilde Traxxas 4060 Air filter Complete

Traxxas 4060 Air filter Complete

Luftfilter (komplett med gummibase og skuminnsats) Air filter (complete with rubber base & foam insert) Air filter assembly with base and foam insert for the TRX® Pro.15 nitro engine

79,-