Traxxas

Traxxas 3675 Dyable 2.2" Front Wheel Rustler/Stampede (2)

Art.nr: TRX 3675

55,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

12 mm hex.

These are FRONT nylon rims for the Traxxas electric Rustler, electric Stampede,
and any other Traxxas vehicles which use a hex-style drive washer. These will
NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1974 on those.
*
Includes: (2) white nylon front rims (aka wheels)
*
Features: dyeable white nylon construction
          8-hole design
          hex-drive hub system (drive hubs not included- TRX 1654)
*
Specs: 2.2" diameter
       1.9" width
*
Comments: The rear set of rims is TRX 3674. The only difference between these
          two rims is the internal offset is greater on the rears.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Tamiya 53159 4MM FLANGE LOCK NUT BLUE

Hovedbilde Tamiya 53159 4MM FLANGE LOCK NUT BLUE

Tamiya 53159 4MM FLANGE LOCK NUT BLUE

4MM FLANGE LOCK NUT BLUE

89,-

99,-

-10%

Hovedbilde Fly-Sky FS-A3 3 channel receiver for FS-GT2E Radio

Fly-Sky FS-A3 3 channel receiver for FS-GT2E Radio

Description: The Flysky FS A3 is a 3-channel receiver. Compatible with GT2E, GT2G, GT2F, IT4S, GT5, I4X, I6, I6X, I6S, TH9A, TM10, I8 and I10. Specifications: Channels 3 RF 2.4 GHz Protocol AFHDS 2A Input Voltage 4–6.5 V Dimensions 35 × 22 × 12 mm Weight 6 g Range 500–1500 m (air) Suitable For Cars, boats, aircraft models, etc.

199,-

249,-

-20%

Hovedbilde Traxxas 3672 Wheels Truck 2,2

Traxxas 3672 Wheels Truck 2,2" Chrome Rear (2)

Wheels, chrome (2.2'') (rear) (2) Dress up the look of your Traxxas model with these durable nylon wheels with a polished chrome finish. Dyeable nylon wheels are also available allowing you to pick your own color.

69,-

Hovedbilde Savox SW-0230MG PLUS Waterproof 7.4V 0.13 speed/8kg. ...

Hovedbilde Savox SW-0230MG PLUS Waterproof 7.4V 0.13 speed/8kg. ...

Savox SW-0230MG PLUS Waterproof 7.4V 0.13 speed/8kg. ...

SAVÖX SW-0230MGPLUS - Water Proof High Voltage Metal-Geared Standard-Sized Servo The SW-0230MG-PLUS is a budget friendly waterproof digital servo capable of operating on high voltage. This is a great upgrade if your looking to drive your RC vehicle in any condition - rain or snow. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Capable of HV operation Ideal for cars, truck, and boats subject to water or snow Specifications: Torque @ 6V: 6.5kg/cm Torque @ 7.4V: 8kg/cm Speed @ 6V: 0.16 sec/60 deg Speed @ 7.4V: 0.13 sec/60 deg Dimensions L x W x H: 41.8 x 20.2 x 38mm Weight: 60g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 100mA @6.0V, 120mA @7.4V Stall Current (at locked): 1500mA @6.0 V, 1800mA @7.4V Idle Current: 5mA @6.0V, 5mA @7.4V Wire Length: 200 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed Specifications Parts Popular Accessories GPSR

539,-

599,-

-10%

Hovedbilde RC4WD S0588 Chubby 6 Ton Scale Jack Stands

RC4WD S0588 Chubby 6 Ton Scale Jack Stands

This is a pair of RC4WD Chubby 6 Ton Jack Stands for 1/10 scale Vehicles. FEATURES Fully functional jack stands lift 1/10 scale vehicles to work on or for display Cast aluminum construction with powder coated finish, and chrome plated handle INCLUDES Two Chubby 6 Ton Jack Stands for 1/10 scale Vehicles SPECIFICATIONS Height: 2.87" (72.9mm) with lift section fully lowered Width at Base: 1.75" (44.7mm) Length at Base: 1.96" (50mm)

199,-

299,-

-33%

Hovedbilde Traxxas 1914R Front & Rear Body Mount Black Slash

Traxxas 1914R Front & Rear Body Mount Black Slash

Denne erstatter TRX 1914X This is the Front and Rear Body Mounts for the Traxxas Slash 2wd. And Traxxas Body Mount Front/Rear Monster Jam FEATURES: Nylon construction Black in color INCLUDES: One front body mount One rear body mount Two 38mm body posts Two 26mm body posts Installation hardware REQUIRES: Installation on the Traxxas Slash

75,-

Hovedbilde Traxxas 6774 Tires & Wheels Talon Extreme/RXT Black ...

Traxxas 6774 Tires & Wheels Talon Extreme/RXT Black ...

Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (2WD electric rear) (2) (TSM® rated) High-performance all-terrain Talon EXT tires dig into dirt and grass for outstanding traction. The EXT’s tire compound provides extra durability on pavement with a unique design that resists “ballooning” at high speeds. Talon EXT tires come mounted and pre-glued on tough RXT black wheels for no-hassle, out-of-the-box bolt-on traction. TSM®-rated for high-speed applications. Fits 12 mm hex, 2WD electric rear.

349,-

379,-

-8%

Hovedbilde RPM 70680 Screw Kit For Wide Front A-Arms ...

RPM 70680 Screw Kit For Wide Front A-Arms ...

This is the Screw Kit for the Rustler and Stampede 2WD Wide Front A-Arms from RPM. FEATURES Use with XL-5 versions Easy and inexpensive option for bolting camber links (not included) and tie rods (not included) to your electric Rustler XL-5 or electric Stampede 2wd XL-5 when installing RPM Wide Front A-arm kits INCLUDES 4 M3 x 14mm button-head screws 4 M3 x 16mm button-head screws 2 M3 locknuts

39,-

Hovedbilde Yeah Racing Alu 7075 Ball Bearing Steering Set For ...

Hovedbilde Yeah Racing Alu 7075 Ball Bearing Steering Set For ...

Yeah Racing Alu 7075 Ball Bearing Steering Set For ...

Aluminum steering rack takes away most of the slop found in the original part, features bearings allowing for smooth and direct steering input! Feature: For: Tamiya M08 Material: Aluminum Color: Black Include: Aluminum 7075 Ball Bearing Steering Set (1 pc)

329,-

349,-

-6%

Hovedbilde RPM 70662 Wide Front A-Arms Black Rustler/Stampede

RPM 70662 Wide Front A-Arms Black Rustler/Stampede

These are the optional RPM Wide Front A-Arms for the Traxxas Electric Rustler and 2WD Stampede. FEATURES Composite nylon construction Widens front wheel stance by almost 1-1/4" (31.8mm) for greater stability Wide front A-arms extend the front width by exactly the difference in offset between the front and rear wheels INCLUDES Left and Right Wide Front A-Arms with Instruction Sheet REQUIREMENTS Longer turnbuckle and camber links; Rustler XL-5: RPM Screw Kit Traxxas Long Camber Links Traxxas Long Toe Links Stampede XL-5: RPM Screw Kit Traxxas Long Camber Links Traxxas Long Toe Links Rustler VXL: RPM Screw Kit Traxxas Long Camber Links Traxxas Long Toe Links Stampede VXL: Traxxas Long Toe Links One pair of front wheels, used to replace rear wheels, for proper alignment

199,-

Hovedbilde Yeah Racing TATT-020 Oil Filled Gear Differential Set ...

Hovedbilde Yeah Racing TATT-020 Oil Filled Gear Differential Set ...

Yeah Racing TATT-020 Oil Filled Gear Differential Set ...

True oil filled gear differential for Tamiya's TT02 and TT01! Design based on 1/10 competition touring car differentials to ensure smoother operation and oil sealed operation! Comes with driveshaft blade protectors to protect driveshafts and differential outdrive! Note: For the small sized ball joint universals. Features: For: Tamiya TT01 TT02 Material: Plastic/Steel Outdrives Color: Black Includes: Gear Differential (1 pc) Pins (4 pcs) Bevel Gear (1 pc)

319,-

349,-

-9%

Hovedbilde Tamiya 53113 RACING R/S INNER SPONGE

Tamiya 53113 RACING R/S INNER SPONGE

Tamiya 53113 RACING R/S INNER SPONGE This inner sponge set provides an even contact of the tire surface to the ground and extra high grip. Effect Of Inner Spronge Feature: For: 50419/50454/50476/53214/53220/53224/53227/53293/53294 Material: Sponge Color: Gray Qty: 4Pcs Without sponge, the tire may deform uner excessive pressure. Inner sponge minimizes deformation to maintain positive grip.

49,-

59,-

-17%

Hovedbilde Tamiya 54640 TT-02 Carbon Rear Damper Stay

Tamiya 54640 TT-02 Carbon Rear Damper Stay

Tamiya 54640 TT-02 Carbon Rear Damper Stay Description: This is Tamiya TT-02 Carbon Rear Damper Stay. Carbon fiber parts contribute to the increased rigidity of your RC model. Feature: For: Tamiya TT-02, TT-02D, TT-02T and TT-02R chassis Material: Carbon Color: Black Carbon fiber damper stay features a number of attachment positions to allow alteration to the shock angle Contains small parts for damper attachment, such as collars, screws, ball connector nuts and spacers. Use spacers to adjust damper attachment height and model ground clearance Note: these stays cannot be used on TT-02 Type-S and TT-02B chassis Include: Tamiya TT-02 Carbon Rear Damper Stay (1 Set)

269,-

299,-

-10%

Hovedbilde Tamiya 54477 TT-02 Gear Box JT. Univ. Shaft

Tamiya 54477 TT-02 Gear Box JT. Univ. Shaft

These are steel gearbox joint shafts which replace the kit standard plastic parts for increased performance and durability. They must be used in conjunction with item 53792 RC Universal Shaft Assembly set. Compatible with the TT-02 chassis when item 53792 RC Universal Shaft Assembly is used. Gearbox joints x2

119,-

Hovedbilde RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD

RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD

Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

-11%

Hovedbilde Tamiya 53792 Univ. Shaft (TT-01, TT-02 TA04)

Tamiya 53792 Univ. Shaft (TT-01, TT-02 TA04)

Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering. Compatible chassis: TT-01, TT-02 and TA04 Must use item 54477 when using this part with the TT-02 chassis

379,-

449,-

-16%

Hovedbilde Traxxas 3645 Turnbuckles Toe Link 61mm

Traxxas 3645 Turnbuckles Toe Link 61mm

These are the Traxxas 61mm Turnbuckle Toe Links for the Traxxas Stampede. FEATURES Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES Two 61mm (96mm center to center) turnbuckles REQUIREMENTS Installation on the vehicle

99,-

Hovedbilde RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...

RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...

RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Hovedbilde Protoform 148700 Mazdaspeed6 Regular Weight Clear Body ...

Protoform 148700 Mazdaspeed6 Regular Weight Clear Body ...

Designed for 190mm wide touring cars, this is the Protoform Mazda Speed 6 Sedan body. FEATURES: Conforms to all ROAR, EFRA, FEMCA, FAMAR and IFMAR specs Two lower trims lines. One of the lower lines is for the slightly taller requirements of BRCA rules Clear .030" Lexan construction with paint-then-peel overspray film Clear .030" Lexan wing with mounting hardware Decal sheet with headlight and tail light decals Window mask INCLUDES: One Clear Mazda Speed 6 Body with Overspray Film One Decal Sheet One Window Mask Sheet Two 4-40x1/4" Button Head Screws (1/16" hex size) for wing mounting Two 4-40 Nylon Nuts for wing mounting REQUIRES: Body Scissors - and Reamer - and paint of modeler's choice SPECS: Length: 19.75" (502mm) Width: 7.5" (190mm) Height: 4.5" (115mm) (B6)

359,-

Hovedbilde Traxxas 2656T Shock Shafts Titanium XX-Long (2)

Traxxas 2656T Shock Shafts Titanium XX-Long (2)

These are the Optional Titanium Nitride coated XX-long Shock Shafts from Traxxas. FEATURES: Features a Titanium Nitride coating for increased durability. These shock shafts have a Gold color finish. INCLUDES: Two XX-Long Shock Shafts REQUIRES: Two XX-long Traxxas shocks SPECS: Length- 2.1"(52.8mm) Diameter- 0.1"(3mm)

119,-

Hovedbilde Traxxas 2362 Shock Rebuild Kit

Traxxas 2362 Shock Rebuild Kit

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes: 4 E-clips 2 C-clips 2 O-rings 8 Washers 2 Diaphrams

35,-

Hovedbilde Traxxas 1664T Shock Shafts Long Nitro Rustler (2)

Traxxas 1664T Shock Shafts Long Nitro Rustler (2)

There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS: Diameter: 3mm (0.118") Length: 47 mm (1.85") Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

Hovedbilde Traxxas 1985 Fiber Washers 5x8mm (20)

Traxxas 1985 Fiber Washers 5x8mm (20)

These are Replacement Washers from Traxxas. FEATURES: Black teflon construction. Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS: Size: 5x8mm Thickness: 0.5mm

29,-

Hovedbilde Traxxas 3643 Turnbuckles Camber Link 49mm

Traxxas 3643 Turnbuckles Camber Link 49mm

These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Hovedbilde Traxxas 3621X Bumper Front Monster Jam Replica

Traxxas 3621X Bumper Front Monster Jam Replica

This is the optional Front Bumper with Mount in Blue for the Traxxas Monster Jam Replica Series. FEATURES: Plastic construction, blue in color INCLUDES: Front Bumper with Mount and Mounting Screws

59,-