Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Stampede XL-5 / Traxxas 3651X Body Stampede 2WD Blue Painted
-19%

Traxxas 3651X Body Stampede 2WD Blue Painted

Art.nr: TRX 3651X

479,-

589,-

- 19%
Traxxas

Traxxas
På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 3651X

Body, Stampede® (also fits Stampede® VXL), blue (painted, decals applied)
Is it time to upgrade your Stampede® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag.

Accessory part for these models:

  • Stampede® VXL
  • Stampede®

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 3691 Gearbox Halves Left & Right
Traxxas 3691 Gearbox Halves Left & Right
These are the left and right gearbox halves for the Traxxas Rusler and Stampede truck kits. Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts           Assembly Comments: These do not include the hardware for assembly. Refer to manual for           appropriate screws.

99,-

Ikke på lager
Ikke på lager
Hovedbilde RPM 81165 Wide Front Bumper for 2WD Bandit, Rustler & ... Hovedbilde RPM 81165 Wide Front Bumper for 2WD Bandit, Rustler & ...
RPM 81165 Wide Front Bumper for 2WD Bandit, Rustler & ...
RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Blue Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

På lager 3
KJØP
Hovedbilde Traxxas 2380 Differential Pro-Built Bandit, Rustler, ...
Traxxas 2380 Differential Pro-Built Bandit, Rustler, ...
Traxxas 2380 - Pro-Built 2WD Differential Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

169,-

På lager 1
KJØP
Hovedbilde Traxxas 3626R Mounting Plate ESC/Receiver Box (Long ...
Traxxas 3626R Mounting Plate ESC/Receiver Box (Long ...
Mounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)

39,-

På lager 1
KJØP
Hovedbilde Traxxas 3769 Spring Pre Load Spacers
Traxxas 3769 Spring Pre Load Spacers
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

På lager 5
KJØP
Hovedbilde Traxxas 4914R Front Body Mount Posts T-Maxx 3.3
Traxxas 4914R Front Body Mount Posts T-Maxx 3.3
  This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins                    for the Traxxas T-Maxx 3.3R. FEATURES: Constructed of plastic these posts and mount attach the body to the             chassis INCLUDES: Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw             pins REQUIRES: Installing on chassis

75,-

På lager 3
KJØP
Hovedbilde Traxxas 2656 Shock Shafts Hard Chrome (2)
Traxxas 2656 Shock Shafts Hard Chrome (2)
This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

På lager 2
KJØP
Hovedbilde Traxxas 3739 Screw Pin Set (10)
Traxxas 3739 Screw Pin Set (10)
This is the replacement screw pin (or hinge pins) for the Traxxas Stampede and Rustler trucks.  They are constructed of chrome-plated steel and used to hold the suspension arms to the chassis and the hubs. PACKAGE INCLUDE:    Two 3mm x 46mm screw pins    Two 3mm x 40mm screw pins    Two 3mm x 29mm screw pins    Two 2mm x 27mm screw pins    Two 2mm x 24mm screw pins

55,-

På lager 2
KJØP
Hovedbilde Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...
Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...
        This is a Hex Wheel Hub Set for the Traxxas Rustler and                 Stampede. These parts have more offset than                   the stock hex wheel hub set. FEATURES: Gray plastic construction INCLUDES: Two wheel hubs           Two 2.5mmX10mm axle pins SPECS:    Hex size:          12mm           Width:             .32"         (8mm)

39,-

49,-

På lager 3
KJØP
-20%
Hovedbilde Traxxas 3793 Shaft Slipper Clutch w/Roll Pin
Traxxas 3793 Shaft Slipper Clutch w/Roll Pin
This is a Slipper Clutch Shaft for the Traxxas Rustler XL                             and Stampede XL. FEATURES: Steel construction _         Roll pin pre-installed INCLUDES: One slipper clutch set SPECS:    Length:         1.98"          (50mm)           Diameter:        .21"          ( 5mm) COMMENTS: This part will fit both the standard and XL version of the Rustler or Stampede.

39,-

På lager 2
KJØP
Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

På lager 3
KJØP
-10%
Hovedbilde Traxxas 1654X Wheel Hubs Aluminum (2)
Traxxas 1654X Wheel Hubs Aluminum (2)
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

På lager 1
KJØP
Hovedbilde Traxxas 3768 Spring Retainers (2)
Traxxas 3768 Spring Retainers (2)
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

På lager 11
KJØP
Hovedbilde Traxxas 3960 Spur Gear 0.8P 65T
Traxxas 3960 Spur Gear 0.8P 65T
This is the optional .8 Metric Pitch 65 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 65T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.12" (54mm)           Thickness: .23" (6mm)

39,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 3959 Spur Gear 0.8P 62T
Traxxas 3959 Spur Gear 0.8P 62T
This is the optional .8 Metric Pitch 62 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 62T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2" (51mm)           Thickness: .23" (6mm)

39,-

På lager 3
KJØP
Hovedbilde Traxxas 5161 Suspension Screw Pin Set
Traxxas 5161 Suspension Screw Pin Set
This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3 and E-Maxx. FEATURES: Steel construction           Silver in color INCLUDES: Two 59mm screw pins.           Four 73mm screw pins.           Two 65mm screw pins

109,-

På lager 2
KJØP
Hovedbilde Traxxas 1726A Antenna, tube, black (1)/ vinyl antenna ...
Traxxas 1726A Antenna, tube, black (1)/ vinyl antenna ...
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

29,-

På lager 3
KJØP
Hovedbilde Traxxas 1844X Servo Saver Large
Traxxas 1844X Servo Saver Large
Denne erstatter TRX 1844 This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver           on most popular servos including: Futaba, Hobbico, Tower, Airtronics,           and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8"                 Diameter: 1"                 The servo saver has 6 holes for mounting the steering linkages.

55,-

På lager 2
KJØP
Hovedbilde Traxxas 3934 Body Clips (12)
Traxxas 3934 Body Clips (12)
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

På lager 4
KJØP
Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC
Traxxas 3340 Cooling fan, Velineon VXL-3s ESC
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

På lager 4
KJØP
-9%
Hovedbilde Tamiya 87051 Epoxy Putty (Quick Type)
Tamiya 87051 Epoxy Putty (Quick Type)
Epoxy Putty (Quick Type)

79,-

** Ikke på lager
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png