Traxxas

Traxxas 3458 Heat Sink for Velineon 3500 & 540XL

Art.nr: TRX 3458

129,-

Traxxas

Traxxas

På lager: 3

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors

The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor

Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor

Traxxas 3351R Velineon 3500 Brushless Motor

Art.nr: TRX 3351R

Copied

This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power Optimized for 1/10th scale vehicles Ultra high temp sintered neodymium motor magnets 12-gauge motor wire with gold-plated bullet connectors Efficient, high-speed ball bearings Consistent, high-power output Precision-balanced rotor Solder tabs with protective end caps Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS: Type: Sensorless Brushless RPM/volt: 3500 (10-turn) Wire size: 12-gauge Maxx Cable Max RMP: 50,000 Weight: 9.24 oz (262g) Current Ratings: 65A constant / 100A peak/burst Magnet type: Ultra High-Temp. Sintered Neodymium Connection type: Solder tab / TRX 3.5mm Bullet

1.195,-

1.295,-

-8%

Hovedbilde

Hovedbilde

"BULK" Traxxas 3351R Velineon 3500 Brushless Motor

Art.nr: BULK TRX 3351R

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Bulk betyr at den kommer uten emballasje. This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power Optimized for 1/10th scale vehicles Ultra high temp sintered neodymium motor magnets 12-gauge motor wire with gold-plated bullet connectors Efficient, high-speed ball bearings Consistent, high-power output Precision-balanced rotor Solder tabs with protective end caps Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS: Type: Sensorless Brushless RPM/volt: 3500 (10-turn) Wire size: 12-gauge Maxx Cable Max RMP: 50,000 Weight: 9.24 oz (262g) Current Ratings: 65A constant / 100A peak/burst Magnet type: Ultra High-Temp. Sintered Neodymium Connection type: Solder tab / TRX 3.5mm Bullet

995,-

1.295,-

-23%

Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System

Hovedbilde Traxxas 3350R Velineon VXL-3s Brushless Power System

Traxxas 3350R Velineon VXL-3s Brushless Power System

Art.nr: TRX 3350R

Copied

Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC, Velineon 3500 motor, and speed control mounting plate (part #3725)) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. (dette er 1/8 biler) men man bør gire den til ca 55-60 km/t med 3 celler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 3mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

2.095,-

2.395,-

-13%

Hovedbilde

"BULK" Traxxas 3350R Velineon VXL-3s Brushless Power ...

Art.nr: BULK TRX 3350R

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC og Velineon 3500 motor) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 4mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

1.995,-

2.395,-

-17%

Hovedbilde Traxxas 3456 Cooling Fan Kit

Traxxas 3456 Cooling Fan Kit

Art.nr: TRX 3456

Copied

Cooling Fan Kit (Velineon 3500/ 540XL) (Need Heat Sink #3458

299,-

329,-

-9%

Hovedbilde Traxxas 3461 Motor Velineon 540XL Brushless

Traxxas 3461 Motor Velineon 540XL Brushless

Art.nr: TRX 3461

Copied

Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx®)

1.395,-

1.595,-

-13%

Kunder kjøpte også

Hovedbilde Yeah Racing YA-0594RD RC BODY CLIP FOR 1/8 1/10 1/12 ...

Yeah Racing YA-0594RD RC BODY CLIP FOR 1/8 1/10 1/12 ...

Feature: For: 1/8 1/10 1/12 RC Car Material: Steel Include: Body Clips (10 pcs) Yeah Racing RC Body Clip For 1/8 1/10 1/12 10pcs Laser Red Description: Yeah Racing series of body clips featuring different colors for you to match to your paint scheme! More than enough for a car so you can have spares in case you lose one. Feature: For: 1/8 1/10 1/12 RC Car Material: Steel Include: Body Clips (10 pcs)

49,-

Hovedbilde Traxxas 3935A Body Clips Angled Black (10)

Traxxas 3935A Body Clips Angled Black (10)

Body clip (mounting clip), angled, 90-degrees (black) (10)

39,-

Hovedbilde Traxxas 3769 Spring Pre Load Spacers

Traxxas 3769 Spring Pre Load Spacers

This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

Hovedbilde Traxxas 6883 Center Differential Gear Set Slash 4X4

Traxxas 6883 Center Differential Gear Set Slash 4X4

This is the Center Differential Gear Set for use on the 1/10 scale Traxxas Slash 4x4 Ultimate and Platinum Editions. FEATURES: Steel construction Replaces worn or damaged center differential gears INCLUDES: Two Output Gears Two Spider Gears One Spider Gear Shaft REQUIRES: Diassembly of differential

189,-

Hovedbilde Traxxas 3924 Receiver Box

Traxxas 3924 Receiver Box

Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal, grease, 3x10 mm screws (2), 2.5x8 mm screws, and 3x15 mm screws (2).

149,-

169,-

-12%

Hovedbilde Traxxas 5136X Differential Oil Kit Revo

Traxxas 5136X Differential Oil Kit Revo

This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil Three pour spouts

249,-

Hovedbilde Traxxas 7464T Shaft GTR Long Tin-Coated (2)

Traxxas 7464T Shaft GTR Long Tin-Coated (2)

This is a pair of Long GTR Shock Shafts from Traxxas. FEATURES: Fits the front shocks of the LiPo equipped Traxxas Slash 4x4 Ultimate TiN (titanium nitride) coating for smooth operation INCLUDES: Two Long GTR TiN coated Shock Shafts

129,-

Hovedbilde Traxxas 6521 Sensor Temperature & Voltage Long XO-1

Traxxas 6521 Sensor Temperature & Voltage Long XO-1

This is the Long Temperature and Voltage Sensor from Traxxas. FEATURES: Functions with the Traxxas Link system to display battery voltage and temperature INCLUDES: Long Temperature and Voltage Sensor with Mounting Screw SPECS: Length: 14" (356mm)

139,-

159,-

-13%

Hovedbilde Traxxas 6535 Mount Temperature Sensor

Traxxas 6535 Mount Temperature Sensor

This is the Temperature Sensor Mount for the Traxxas TQi Telemetry System. FEATURES: For use with electric powered Traxxas vehicles INCLUDES: Mount, Plastic Tie, and Thermal Pad

39,-

49,-

-20%

Hovedbilde Traxxas 6532 Phone mount for TQi

Hovedbilde Traxxas 6532 Phone mount for TQi

Traxxas 6532 Phone mount for TQi

Traxxas TQi & Aton Transmitter Phone Mount Mount a Mobile Device to your TQi or Aton Transmitter The new Traxxas RC Transmitter Phone Mount provides a convenient mounting base for your mobile device on TQi and Aton transmitters. This mount makes monitoring real-time telemetry and adjusting settings simple, keeping your device secured to the radio for easy access. Spring loaded clamps hold a variety of mobile devices to the mount, and the base swivels and tilts to customize the position. Get the most from Traxxas Link telemetry accessories and apps with the new Transmitter phone mount. Neither a smart-phone or a transmitter is included.

199,-

219,-

-9%

Hovedbilde Traxxas 3956X Spur gear, steel, 54-tooth

Traxxas 3956X Spur gear, steel, 54-tooth

Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6780 center differential)

189,-

Hovedbilde Traxxas 6730X Chassis Brace Kit Alu Blue

Hovedbilde Traxxas 6730X Chassis Brace Kit Alu Blue

Traxxas 6730X Chassis Brace Kit Alu Blue

Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

Hovedbilde Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...

Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...

Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles) Set of four replacement 12 mm steel wheel hubs for the 9080-series Extreme Heavy Duty Upgrade Kit. Includes 2x9.8 mm pins (4). Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.

129,-

139,-

-7%

Hovedbilde Traxxas 9090X Gear Adapter Fixed Raptor R, Stampede ...

Traxxas 9090X Gear Adapter Fixed Raptor R, Stampede ...

Traxxas 9090X - Gear adapter, fixed Fixed gear adapter. Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Stampede® 4X4 Brushless

49,-

Hovedbilde Traxxas 6855G Driveshaft Center Aluminum Green

Traxxas 6855G Driveshaft Center Aluminum Green

Driveshaft, center, 6061-T6 aluminum (green-anodized)

125,-

Hovedbilde Traxxas 6855R Driveshaft Center Alu Red Slash ...

Traxxas 6855R Driveshaft Center Alu Red Slash ...

Driveshaft, center, 6061-T6 aluminum (red-anodized)

125,-

Hovedbilde Traxxas 5924 Body Slash 2WD/4WD ProGraphix (for ...

Traxxas 5924 Body Slash 2WD/4WD ProGraphix (for ...

Traxxas 5924 Body Slash 2WD/4WD ProGraphix (for Clipless Mounting) Body, Slash 2WD, ProGraphix (also fits Slash VXL & Slash 4X4) (graphics are printed, requires paint & final color application)/ decal sheet From mild to wild, choose your own colors to personalize your clipless Slash body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab a can of Traxxas ProGraphix paint to spray the final color. It's easy for anyone to get instant, professional results. Traxxas ProGraphix bodies come completely trimmed for easy installation. A protective overspray film is applied to the body for convenience. Older Slash chassis without clipless mounts will require 6940 (2WD) or 6976 and 10125 (4X4) in order to mount the body. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL

679,-

699,-

-3%

Hovedbilde Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...

Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 1.004 Blue Compression Rate. FEATURES: Steel construction, white in color Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 1.004 Blue Rate GTR Shock Springs SPECS: Length: 2.2" (56mm) Wire Diameter: 0.043" (1.1mm)

59,-

69,-

-14%

Hovedbilde Traxxas 3655-BLK Suspension arms, black, front/rear ...

Traxxas 3655-BLK Suspension arms, black, front/rear ...

Traxxas 3655-BLK Suspension arms, black, front/rear (left & right), heavy duty (2)

149,-

159,-

-6%

Hovedbilde Traxxas 3950X Pinion Gear 20T-32P Hardened Steel

Traxxas 3950X Pinion Gear 20T-32P Hardened Steel

Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

Hovedbilde Pro-Line 117214 Road Rage 2.8

Hovedbilde Pro-Line 117214 Road Rage 2.8

Pro-Line 117214 Road Rage 2.8" mounted on F-11 wheels ...

This is a pair of Pre-mounted Road Rage 2.8” Tires. Looking for the ultimate in low profile look for your Traxxas® JATO®, Rustler® or Stampede®? Do you want awesome traction while cruising the streets in your brand new Pro-Line Chevy Silverado Pro-Touring body? Then check out Pro-Line's 2.8" Road Rage designed specifically for the Street! The Road Rage 2.8" tire features a low profile design for rapid response, M2 (Medium) long-lasting rubber, and a Readers' Choice Award winning tread design which adds up to a winning combination. The tight tread spacing makes the Road Rage planted while carving up the asphalt below. Is there a little water on the street? No problem - the Road Rage's deep V tread acts as knife through butter in wet conditions. Asphalt and concrete is where the Road Rage excels. Now you can easily make it yours and cruise the neighborhood in style with the low profile look of the 2.8" Road Rage. Pro-Line has done the work for you by offering the Road Rage 2.8” tires mounted on F-11 Black Wheels. The F-11 style wheel brings the tough and rugged look of full-size trucks straight to your vehicle of choice! The satin black finish of this super durable wheel will make your truck stand out from the rest. The wheel features a molded-in bead-loc ring and lug nuts, 11 triangulated spokes and a scale P-L logo. This 12mm hex wheel is a must have wheel for all Pro-Line fans! Tire Features: Deep V tread for Awesome Traction Made from Long Lasting M2 (Medium) Rubber Foam Inserts Included Low Profile for Rapid Response Perfect in combination with the Chevy Silverado Pro-Touring Body Readers' Choice Award Winning Tread Design Pre-Mounted by the Pros so you can get out the door! Wheel Features: Tough 11 spoke wheel style Satin Black finish Molded in Bead-loc ring and lug nuts for scale look Wheel made from high-strength, durable DuPont nylon material New P-L Racing Logo and Styling Made in the USA Included: Road Rage 2.8” (Traxxas® Style Bead) All Terrain Tires Mounted on F-11 Black Wheels (2 pcs) Specs: Height: 103 mm Width: 52 mm

699,-

Hovedbilde Traxxas 3946X Pinion Gear 16T-32P Hardened Steel

Traxxas 3946X Pinion Gear 16T-32P Hardened Steel

Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

Hovedbilde Traxxas 3944X Pinion Gear 14T-32P Hardened Steel

Traxxas 3944X Pinion Gear 14T-32P Hardened Steel

Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

-10%

Hovedbilde RPM 80189 Rear A-Arms Rustler/Stampede 2WD Red ...

RPM 80189 Rear A-Arms Rustler/Stampede 2WD Red ...

RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Red Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

-12%

Hovedbilde Traxxas 7430R Bulkhead Front (for Chassis 6723R) ...

Traxxas 7430R Bulkhead Front (for Chassis 6723R) ...

Bulkhead, front (for use only with #6723R chassis)

65,-