Hopp til innhold
-9%

Traxxas 2832X LiPo 3S 11,1V 5000mA 25C iD-Connector (Short)

Art.nr: TRX 2832X

995,-

1.095,-

- 9%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 5000mAh 11.1v 3-Cell 25C Short LiPo Battery


TRAXXAS CERTIFIED LIPO POWER!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.

Specs:

  • Type: LiPo
  • Total Capacity: 5000 mAh
  • Voltage: 11.1 V (3S)
  • C Rating: 25
  • Length: 135 mm
  • Height: 28.5 mm
  • Width: 44 mm
  • Weight: 354 g

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 2970GX
Copied
EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification   One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! ­ ­ QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER ­ Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries ­ ­     EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: ­ 100–240 Volts Charge Current Range: ­ 1.0-4.0A (40W Max.) Discharge Current Range: ­ 500mAh Current Drain For Balance Ports: ­ 500mAh NiMH Battery Cell Count: ­ 5–8 Cells LiPo Cell Count: ­ 2–3 Cells Net Weight: ­ 365g Dimensions: ­ 146 x 123 x 53mm     MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

KJØP
-9%
Art.nr: TRX 2971GX
Copied
Fast, easy and Bluetooth-compatible! Introducing the EZ-Peak Live, the most powerful, most advanced charger ever offered by Traxxas! Compatible with 5-8 cell NiMHs and 2-4S LiPos, the EZ-Peak Live is equipped with built-in Bluetooth to work seamlessly with the EZ-Peak Live app for Apple and Android devices. It provides you detailed battery pack information, remote monitoring and advanced operating functions through the HD color interface on your device. Patent-pending iD technology makes charging as easy as plugging in your battery and pressing “Start!” 100-Watt 12-amp output. Recognizes Traxxas iD-equipped batteries to automatically program and optimize charger settings. LED charge progress indicator. Optimized for faster LiPo balance charging. One-button LiPo storage charge protects your battery investment. Advanced high-resolution peak detection delivers a perfect charge. Easy-to-use interface. Supports Traxxas EZ-Peak Live Application, compatible with Apple and Android devices. Audible alerts. Built-in cooling fan. Advanced Mode for full manual control through the EZ-Peak Live App. Legacy support for all Traxxas High-Current Connectors. Built-in balance port for conventional LiPo batteries. Charges 5-8 cell NiMH batteries. Charges 2S, 3S and 4S LiPo batteries. AC Input: 100-240V, 50-60Hz, 1.5A.   Traxxas iD Battery Type Capacity EZ-Peak Live™ Maximum Charge Rate 6-cell NiMH 1200-1800mAh 2A 3000-4200mAh 4A 4300-5000mAh 5A 7-cell NiMH 3000-4200mAh 4A 4300-5000mAh 5A 8-cell NiMH 3000-4200mAh 4A 4300-5000mAh 5A 2-cell LiPo, 7.4v 6000-10000mAh 12A 3-cell LiPo, 11.1v 4500-8400mAph 9A 4-cell LiPo, 14.8v 3400-6700mAh 6.7A     This is the Traxxas EZ-Peak Live 12Amp NiMH/LiPo Fast Charger  with iD Auto Battery Identification and Bluetooth.   FEATURES Optimized for Traxxas NiMH and LiPo battery packs  Built-in Bluetooth works seamlessly with the Traxxas EZ-Peak Live  app for iOS and Android devices  Free EZ-Peak Live app provides access to high definition graphical  interface, firmware upgrades, remote monitoring, alerts for up to  four chargers, detailed live charging info and the ability to  turn off iD mode  Traxxas iD system detects which Traxxas iD equipped battery is  connected and automatically configures settings for fastest charge  iD mode may be switched off through the EZ-Peak Live Application  for charging older Traxxas batteries with non-iD high-current  connectors  12A LiPo charging rate  5A NiMH charging rate  EZ-Peak Live Storage Mode prepares LiPo batteries for extended  storage  Charge status LEDs INCLUDES EZ-Peak Live NiMH/LiPo Fast Charger with iD Auto Battery  Identification and Bluetooth, Battery Connector, and Balance  connector   REQUIREMENTS LiPo charging bag if charging LiPo batteries   SPECIFICATIONS  AC Input: 100-240V, 50-60Hz, 1.5A  Charger Output: 100W, 4-19V  Charge Current Range: 1.0-12A  Discharge Current Range: 665mAh  Current Drain for Balance Ports: 665mAh  LiPo Battery Cell Count: 2-4S  NiMH Battery Cell Count: 5-8 cells  Dimensions: 5.2 x 6.6 x 2.2" (133 x 169 x 55mm)  Weight: 1.15lbs (526g)

1.395,-

1.495,-

KJØP
-7%
Art.nr: TRX 2973
Copied
Traxxas EZ-Peak Live Dual Charger The new EZ-Peak™ Live Dual charger takes the same great features of the original EZ-Peak Live and supercharges them for faster charging and dual 4S battery charging. Exclusive Traxxas iD technology makes 1-button charging a reality. Just plug in an iD-equipped NiMH or LiPo battery and press start. Nothing could be easier! The new MAXX Charge feature fast charges one battery at the highest rate to get you back in the action sooner than ever, while continuing to supply the remaining available power to the second battery. Take full control over charging features with the revolutionary high-definition full color EZ-Peak Live App for your mobile device. When it comes to fast and easy charging, nothing beats Traxxas! Quick Features on EZ-Peak Live Dual (#2973G) iD Charger: 200 Watt 26+ amp output Recognizes iD-equipped batteries to optimize charger settings MAXX Charge feature gets you back in the action quickly Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface with dual LED charge progress indicators Supports Traxxas EZ-Peak Live Application Audible alerts Dual high-flow cooling fans Advanced Mode for full manual control through EZ-Peak Live App Legacy support for all Traxxas High-Current Connectors Integrated dual balance ports for conventional LiPo batteries Built-in 2-amp USB charger output port Charges Dual 5-8-cell NiMH batteries Charges Dual 2s, 3s, and 4s LiPo Batteries Patent Pending iD Technology There has never been an easier or safer way to charge your batteries than the Traxxas iD system. Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! Traxxas pioneered this exclusive technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. MAXX Power Faster charging means more time behind the wheel. The new MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun. Charging Flexibility The EZ-Peak Live Dual is a true multi-chemistry charger. The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Even the largest 4-cell LiPo batteries are no problem with up to 16 amps of charging horsepower per side. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device. No other charger features EZ-Peak Live’s combination of power and flexibility with iD safety and simplicity. Technology Traxxas pushes the technological envelope to provide you the fastest, most convenient charging experience possible. Not only is EZ-Peak Live Dual our most powerful charger ever, it’s also our most advanced. The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. This is charging the Traxxas way—fast, easy, and more advanced than ever!   App Features: Important Customer Note: Accessing some charger features requires a mobile device with Bluetooth® capability (sold separately) and the Traxxas EZ-Peak Live Application. EZ-PEAK LIVE DUAL (#2973G) SPECIFICATIONS: AC Input: 100-240V, 50-60Hz, 2.35A Charge Current Range: 1.0—26.0A+ Discharge Current Range: 750mAh Current Drain for Balance Ports: 750mAh NiMH Battery Cell Count: 5-8 Cells LiPo Cell Count: 2-4 Cells Dimensions: 204 x 174 x 68mm Compatible Connectors:

2.295,-

2.595,-

KJØP
-12%
Art.nr: VPLIPOBAGA
Copied
Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

KJØP
Art.nr: VPLIPOBAGD
Copied
VAPEX LiPo-Safe Bag-D 125x64x50mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Perfect for 1/16-1/18 car batteries, 1-2s Shorty LiPo's and smaller airplane batteries Fits inside the storage Bag-E Velcro Flap Size: 125x64x50mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

89,-

KJØP
-11%
Art.nr: B9665
Copied
DynoMAX B9665 - TRX Charge Lead for Chargers with XT60 Output This is a charging lead for batteries with a TRX connector. It fits the latest SkyRC chargers that are eqipped with a XT60 male output/charging connector. Don't use this for charging Traxxas LiPo batteries! Specs: Battery Connector: TRX Charger Connector: XT60 Wires: 14AWG Length: 500mm

125,-

KJØP
Art.nr: B9702
Copied
Charge Lead Traxxas with 4mm banana plugs

79,-

KJØP
Art.nr: 100149-01
Copied
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Art.nr: VPLIPOBAGE
Copied
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%

Kunder kjøpte også

This is the Completer Pack with the Traxxas EZ-Peak 100W Dual Battery Charger  with iD Auto Battery Identification,  and two Power Cell 11.1V 5000mAh 25C 3S LiPo Batteries.     FEATURES #2972 Charger   Charges 2S and 3S LiPo batteries  5-8 cell NiMH batteries  Traxxas's iD technology automatically configures and optimizes charge  settings for Traxxas iD equipped batteries  Charges two batteries simultaneously at up to 50W (4 amps) each, or  charges single battery at 100W (8 amp) output in High-Output  mode  Charges a NiMH and LiPo at the same time  Advanced Mode for full manual control of charger settings  Progress bar and audible alerts  Storage Mode prepares LiPo batteries for extended storage  30 day limited warranty through Traxxas beginning at date of  purchase  #2872X Batteries   Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas EZ-Peak 100W Dual Battery Charger with AC Power Cord,  Instructions, Cooling Fan  Two Power Cell 11.1V 5000mAh 25C LiPo 3S Batteries with High-Current  Connectors and Integrated Balance Plugs   SPECIFICATIONS Charger;  Input Power: 100-240V/50-60Hz  Output: 100W max  Charge Current: 1-4A (dual mode), 5-8A (high output mode)  Discharge Current Range: 500mA  Current Drain for Balance Ports: 500mA  Weight: 20.3oz (575g)  Dimensions: 7 x 5.4 x 2.2" (176 x 138 x 57mm)  Batteries;  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)

2.995,-

3.495,-

KJØP
-14%
Traxxas 6640X Gimbal Sticks Transmitter (Thumb Pads)

49,-

KJØP
Traxxas 2433 Body, Bandit, pink (painted, decals applied) Is it time to upgrade your Bandit with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Bandit® VXL Bandit®

549,-

KJØP
This is the Rear Tire set for the Traxxas Bandit vehicle FEATURES: Rubber Anaconda tires           Split X-Pattern tread           Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS:    Overall Diameter: 3.54" (90mm)           Width: 1.69" (43mm)

339,-

369,-

Ikke på lager
-8%
This is a set of telescoping drive shafts. Includes:  2 black nylon telescoping shaft (each shaft is made of two pieces)            4 aluminum U-joints

59,-

69,-

KJØP
-14%
This is an optional Wheelie Bar for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

209,-

229,-

KJØP
-9%
3s 5000mAh - 60C - Gens Ace XT90 Bashing Series Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 342g Størrelse: 135x43x25mm Strømplugg: XT90     Product details in english Gens ace lipo 5000mah 3S1P 60C battery Suited to the following models:1/8, 1/10 RC car model, such as 1/8 SLEDGE. Fast charging by 5C is available.   Specs: - Product Type: lipo battery pack-Bashing Series - Capacity: 5000mAh - Voltage: 11.1V - C rate: 60C  - Weight: 342g - Dimensions: 135*43*25mm - Balance Plug: JST-XHR-4P - Discharge Plug: XT90 - Charge Rate: 1-3C Recommended   Usage: Gens ace lipo 5000mah 3S1P 60C battery packs suited for 1:8 TYPHON 6S/3S 1:10 SENTON 3S/GRANITE 4x4 MEGA/BIGROCK 4x4 3S BLX/OUTCAST/Kraton 1/8 SLEDGE.

599,-

649,-

KJØP
-8%
Traxxas 95096-4-BLUE - Sledge 6s Truggy Belted - GREEN Redefining 1/8 Scale Off-Road Engineered. Tested. Built to a higher standard. Sledge® is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. New belted Sledgehammer® tires limit high-speed tire expansion for a larger, flatter contact patch and game-changing high-speed precision and control. Engineered for 6s Power Sledge is the only truck in this class with a properly sized, 6s-capable driveline. Bigger gears. More steel. Basically bombproof. Sledge smashes the status quo to be the new standard for extreme 6s durability. Superior Chassis Strength Sledge is engineered to have the strongest chassis in the class. The triangulated chassis structure integrates a deep-formed aluminum plate with a multi-point composite truss system and the patent-pending full-length T-Bar™. Built on a solid foundation, Sledge is strongest where it matters most. Clipless Body Remove and replace the body in just seconds with exclusive patent-pending clipless body solutions engineered by Traxxas. Sledge’s clipless body goes on smoothly with a satisfying snap. The body is designed to come off when YOU release it. Monster Servo Sledge is equipped with a high-performance metal gear servo that packs massive torque inside a heat dissipating aluminum center case. Powerful and reliable steering authority is assured with no upgrade required. VXL-6s Power System The Velineon VXL-6s features new hardware and new tuning specifically for the 2000 kV motor. Together they deliver substantially more power under the curve for increased mid-range punch and hard-charging acceleration you can see and feel. Belted Sledgehammer Tires Sledge’s belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. Specs: Length (including wing): 604 mm Front Track: 459 mm Rear Track: 459 mm Ground Clearance: 50 mm Weight (no battery): 5.77kg Height (overall): 214 mm Wheelbase: 384 mm Shock Length (front): 128 mm Shock Length (rear): 144 mm Tire Size: 170 x 84 mm Wheel Diameter: 3.8 inches (97 mm) Speed Control: Velineon® VXL-6s (3485) Motor (electric): Velineon® 2000 kV Brushless Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: 3.2 mm aluminum plate Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank w/metal servo arm Wheels & Tires: 3.8″ wheels, pre-glued belted Sledgehammer® Tires & foam inserts; 6.7x3.8 Radio System: 2-Channel, TQi™ 2.4 GHz Transmitter with TSM® receiver Servo: 2275 Waterproof, metal-gear (347 oz-in torque) Top Speed: 112+ KPH with two 3s LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: Narrow configuration (L/W/H): 181 x 50 x 29/37/45 mm* / Wide configuration (L/W/H): 160 x 57 x 29/37/45 mm* What’s In The Box: Sledge, Ready-To-Race® monster truck with Traxxas 2000 kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi 2.4 GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000 mAh 3-cell 11.1 V Power Cell LiPo batteries for maximum performance. Dual 7600 mAh 7.4 V LiPo batteries or a single 6700 mAh 14.8 V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

9.995,-

11.995,-

KJØP
-17%
Shroud, motor fan (fits #3483 motor) Replacement cooling fan shroud for the 3476 cooling fan kit. Fits 9589 motor cradle. Includes mounting screws. Accessory part for these models: Sledge™

289,-

319,-

KJØP
-9%
Shock Absorber Unit(Metal Cap And Ring )

169,-

KJØP
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

KJØP
 This is the set of Traxxas Long GTR Shock Springs                       with 0.892 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.892 Blue Rate GTR Shock Springs SPECS:    Length: 1.8" (45mm)           Wire Diameter: 0.043" (1.1mm)

69,-

KJØP
   This is the set of Traxxas Extra Extra Long GTR Shock Springs                     with 0.884 Pink Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 0.884 Pink Rate GTR Shock Springs SPECS:    Length: 2.2" (56mm)           Wire Diameter: 0.043" (1.1mm)

59,-

KJØP
These are the Traxxas 3x4mm and 4x4mm Set Screws. FEATURES: Constructed of steel           Also known as grub screws INCLUDES: Eight 3x4mm set screws in black.           Four 4x4mm set screws finished in natural finish. REQUIRES: 2mm hex wrench for 4x4mm screws           1.5mm hex wrench for 3x4mm screws COMMENTS: For use in Traxxas kits or any application requiring these size set             screws.

29,-

KJØP
This is the Complete Slipper Clutch Set for the Slash 4X4 and Stampede 4x4 from Traxxas. FEATURES: Complete slipper clutch assembly           Pre-assembled INCLUDES: 2 nuts           1 spring           1 metal plate           1 pin           3 pads           2 washers           54T spur gear REQUIRES: Installation in vehicle

239,-

KJØP
Springs Progressive Rear Pink (2) Accessory part for these models: Ford F-150 Raptor Ford Raptor Nitro Slash Slash VXL Slash

59,-

KJØP
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
-17%
This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.              These are located in the front steering blocks. FEATURES: Steel construction           Natural color INCLUDES: Two front axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 32mm (1.26")           Diameter: 5mm COMMENTS: These will not work for the nitro versions.  For that axle, use TRX 2536,         

39,-

KJØP
This set of rod ends, balls, and screws is used on all but four of Traxxas' kits.  It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes:  4 short rod ends (17mm)            16 long rod ends (19mm)            2  ball screws            18 hollow ball connectors

85,-

95,-

KJØP
-11%
Fits: Traxxas Slash 2WD with LCG chassis only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

399,-

KJØP
Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP
Traxxas 6965 - Slash Clipless body Body, Slash 4X4 (also fits Slash VXL & Slash 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and #6966 latch mounts for clipless mounting) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it easy to get professional quality results. The Slash 4X4 clear clipless body comes fully-trimmed with decals, window masking, and a protective overspray film. Requires 6967 body latches and 6966 latch mounts (sold separately). Accessory part for these models: Slash 4X4 Brushless Slash 4X4 Ultimate Slash 4X4 VXL Slash Brushless Slash

489,-

519,-

KJØP
-6%
Traxxas 6929 - Clipless Body Conversion Kit Slash 2WD  Body conversion kit, Slash 2WD (includes front & rear body mounts, latches, hardware) (for clipless mounting) The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide a secure mounting point that helps prevent pull-through damage. The kit includes all mounting hardware and adhesive templates. Accessory part for these models: Slash VXL Slash 2WD Unassembled Kit Slash

369,-

KJØP
Traxxas 6928 Body conversion kit, Slash 4X4 (includes front & rear body mounts, latches, hardware) (for clipless mounting) The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide a secure mounting point that helps prevent pull-through damage. The kit includes all mounting hardware and adhesive templates. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash® 4X4 Brushless Slash 4X4

399,-

419,-

KJØP
-5%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png