Hopp til innhold

Traxxas 2553 Screws Countersunk Machine 3x15mm Revo (6)

Art.nr: TRX 2553

35,-

Traxxas

Traxxas

** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES: Steel construction, Black in color
          Used on the Traxxas Revo monster truck, can also be used in any
            application where a 3x15mm countersunk screw is required

INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws

REQUIRES: 2mm hex head wrench.

SPECS:    Length:  15mm
          Diameter: 3mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 2085RL - Digital High Torque Metal Gear BB WP Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof The High Torque Maxx Servo is the ultimate steering upgrade for your X-Maxx®, XRT®, or Maxx®. With a staggering 46.8kg/cm of torque and full steel gears, the High Torque Maxx Servo delivers total steering authority on even the largest Sledgehammer® tires. The case features an anodized aluminum center section with cooling fins and ball bearings for increased precision. The servo includes a stiffer servo saver spring and steel steering linkage for maximum steering authority and control during high speed driving. Servo requires Maxx® mount found in Maxx, X-Maxx®, and XRT®. Does not fit other vehicles. FEATURES: Fits X-Maxx, XRT, and Maxx trucks Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management® (TSM) 46.8kg/cm torque at 6.0 volts 0.13 sec/60° at 6.0 volts Full steel gears Full ball bearings Aluminum center case with cooling fins Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT®

1.495,-

1.695,-

På lager 1
KJØP
-12%
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Hull Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

På lager 4
KJØP
This is a package of 6 Threadlocked Grubs (4mm) from Traxxas.     FEATURES Threadlocking compound pre-applied.  Hardened steel construction.  Designed for use with Traxxas R/C kits.  Hexagon socket drive insert.   INCLUDES Six 4mm Grubs

49,-

På lager 1
KJØP
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

219,-

På lager 1
KJØP
Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

219,-

På lager 2
KJØP
Bulkhead, rear (upper and lower)

149,-

På lager 1
KJØP
Bulkhead Front Upper & Lower Maxx

149,-

På lager 7
KJØP
Ring gear, differential/ pinion gear, differential (front)

215,-

På lager 1
KJØP
Rebuild kit, GT-Maxx® shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks)

99,-

109,-

På lager 7
KJØP
-9%
Traxxas Torque-Biasing Central Drive Differential for Maxx Think of the Torque-Biasing Center Drive like a center differential on steroids. The all-metal construction has no problem coping with the motor’s torque and allows you to tune the front drive bias with different weight oils. Instead of lifting the wheels and losing traction, the center drive distributes power to the wheels with the most grip to prevent unloading.

849,-

899,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-6%
  Toe links, front (TUBES green-anodized, 6061-T6 aluminum) (2) (for use with #8995 WideMaxx™ suspension kit)

479,-

499,-

** Ikke på lager
KJØP
-4%
Suspension arms, upper, green (left or right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

149,-

** Ikke på lager
KJØP
Suspension arms, lower, green (left and right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

145,-

** Ikke på lager
KJØP
Traxxas 9511A  Body Sledge Orange Complete w/ Supports & Mounts Body, Sledge™, orange/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/8 Painted: Yes

799,-

899,-

** Ikke på lager
KJØP
-11%
X-Maxx®, green-x Body Painted, decals applied Assembled with front & rear body mounts, rear body support, and tailgate protector Car Type: Truck Scale: 1/8 XL, Large Scale Painted: Yes

1.095,-

1.295,-

** Ikke på lager
KJØP
-15%
Traxxas 10280A - Differential Differential kit, center (complete) (aluminum carrier, 100K wt differential fluid) (fits Maxx® or Maxx® Slash®) The high-performance center differential absorbs driveline shocks to improve durability and distribute power evenly for mind-bending acceleration. The finned aluminum housing helps dissipate heat with a tough 44-tooth, mod 1 (1.0 metric pitch) steel spur gear for maximum durability. The sealed differential comes pre-loaded with 100k silicone oil to help prevent unloading and ballooning of the front tires. Replacement part for these models: Maxx® Slash® Accessory part for these models: Maxx®

879,-

** Ikke på lager
KJØP
Traxxas 8958 Rod End w/ Pivot Balls (4) Maxx

69,-

** Ikke på lager
KJØP
Traxxas 9557X Driveshaft, rear, steel constant-velocity (shaft only) (1) (for use only with #9654X rear steel CV driveshafts) Accessory part for these models: Sledge®

199,-

** Ikke på lager
KJØP
Traxxas 6492X Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

89,-

99,-

På lager 2
KJØP
-10%
Spur gear, 52-tooth, steel (1.0 metric pitch)

149,-

På lager 11
KJØP
Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 23-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

79,-

99,-

På lager 1
KJØP
-20%
Traxxas 9552 Carriers Stub Axle (Pair) Sledge Carriers, stub axle (left and right)

69,-

På lager 1
KJØP
Traxxas 9585 Differential Center Complete Sledge Differential, center (complete) (fits Sledge™)

659,-

** Ikke på lager
KJØP
Traxxas 9584 Mount Center DIff Sledge Mount, center differential

89,-

På lager 4
KJØP
Shock shaft, 72mm (GT-Maxx®) (steel, chrome finish) (2)/ rod ends (2)/ hollow balls (2)

145,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png