Hopp til innhold

Traxxas 8978 Ring Gear & Pinion Gear Diff Front Maxx

Art.nr: TRX 8978

215,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Ring gear, differential/ pinion gear, differential (front)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hobbywing EzRun 4985 Brushless Sensorless 1650KV Motor Strong Power With a fast acceleration response and a rock-solid, stable output, the EZRUN 4985/5687/56113 motor can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. Features: 4 pole rotor for high torque, fast acceleration response and stable power output Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%) CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearings for high durability and smoothness Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency This EZRUN motor is a perfect match for the HOBBYWING EZRUN MAX6/5 ESC Temperature sensor port provides all-round protection to the power system (Hobbywing will develop some ESCs with the motor thermal protection function to pair these motors in future) Specs: Type: Brushless Sensorless Poles: 4 KV: 1650 LiPo: 3-6S No Load: 5.4A Max Current: 160A Power: Max 5700W Outer Dia: 49mm Length: 85mm Shaft Dia: 5mm Shaft Length: 21.5mm Weight: 587g Application: 1/6 & 1/7 Vehicles

1.295,-

1.595,-

KJØP
-19%
Traxxas 8919R Battery Hold-down Set Maxx (Long Wheelbase) Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase))

129,-

KJØP
Suspension arms, lower, black (left and right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

145,-

KJØP
Bumper Mount Rear Maxx

59,-

KJØP
Shock caps, GT-Maxx® shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks)

69,-

KJØP
 This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.              These pins go through the stub axles on each wheel,                the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins           Axle pins are steel   INCLUDES: Four 2.5x12mm axle pins   REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs             (4954) over pins.    

19,-

KJØP
Shock caps for Sledge® GT-Maxx® shocks with spring perches (2) and adjustment collars (2

79,-

89,-

KJØP
-11%
Traxxas 8955R Driveshaft Center Alu Maxx (Long Wheelbase)

129,-

KJØP
Output gear, center differential, hardened steel (2)

199,-

Ikke på lager
This is a set of 8x32 to 17mm 1/2" Offset Hex Adapters. Do you need to replace your Raid 8x32 17mm hexes for your 3.8" Removable Hex Wheels? You came to the right place! This pack contains a full car set of 17mm Hexes for your 8x32 3.8" wheels. These hexes are made from High-strength, Durable DuPont Black Nylon Material and are built to take a beating. These Hex Adapters are proudly Made by Us in the USA. Get your replacement 8x32 to 17mm Hex Adapters today! Replace your 8x32 3.8" 17mm Hexes Built to Take a Beating Made from High-strength, Durable DuPont Nylon Material Includes 4 Hexes Per Set Made in the USA, since 1982   Included 8x32 to 17mm 1/2" Offset Hex Adapters (4 pcs)   Fits Fits any of Pro-Line's 8x32 Removable Hex Wheels Badlands 3.8" Tires Mounted on Raid Black 8x32 Wheels Badlands MX38 3.8" Tires Mounted on Raid Black 8x32 Wheels Road Rage 3.8" Tires Mounted on Raid Black 8x32 Wheels Sling Shot 3.8" Tires Mounted on Raid Black 8x32 Wheels Street Fighter HP 3.8" BELTED Tires Mounted on Raid Black 8x32 Wheels Trencher HP 3.8" BELTED Tires Mounted on Raid Black 8x32 Wheels Trencher X 3.8" Tires Mounted on Raid Black 8x32 Wheels

149,-

159,-

KJØP
-6%
Traxxas 9670 Tires Sledgehammer (17mm Sledge 1/8) 3.8'' (2)

399,-

KJØP
Traxxas 8688 Gear, center differential, 44-tooth (fits #8980 center differential) Accessory part for these models: Maxx  

149,-

KJØP
Suspension Arm Lower Right F/R Blue X-Maxx WideMaxx, XRT Suspension arm, lower, blue (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

179,-

199,-

KJØP
-10%
This is the Front or Rear Corner Suspension Pin Set  for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction  Fastens suspension arms to chassis and to front and rear uprights   INCLUDES One 4x85mm Pin  Three 4x47mm Pins  Two 4x33mm Pins   SPECIFICATIONS  Diameter: 0.16" (4mm)  Length: 3.3" (85mm), 1.8" (47mm), 1.3" (33mm)

109,-

119,-

KJØP
-8%
These are the Suspension Pin Retainersfor the Traxxas X-Maxx Monster Truck. FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place INCLUDES Four Suspension Pin Retainers Replacement part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT® Accessory part for these models: Maxx® Slash® Maxx® X-Maxx® Ultimate XRT® Ultimate

35,-

45,-

KJØP
-22%
Suspension arm, lower, blue (1) (left, front or rear) (for use with #7895X X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

189,-

209,-

KJØP
-10%
Suspension arms, upper, blue (left or right, front or rear) (2) (for use with #7895X X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

149,-

KJØP
Covers, gear (2)

59,-

69,-

KJØP
-14%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-6 Yellow).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Cooling fan, Velineon VXL-8s ESC

239,-

KJØP
Caster blocks (c-hubs), left & right

69,-

KJØP
Steering blocks, left & right

69,-

KJØP
Suspension arms, upper, white (left or right, front or rear) (2)

85,-

KJØP
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Green Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

KJØP
-12%
Suspension arms, lower, green (left and right, front or rear) (2) (for use with #8995 WideMaxx™ suspension kit)

145,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png