Hopp til innhold

Traxxas 2551 Screws Countersunk Machine 3x10mm Revo (6)

Art.nr: TRX 2551

35,-

Traxxas

Traxxas

På lager: 4

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws.

FEATURES: Steel construction, Black in color
          Used on the Traxxas Revo monster truck, can also be used in any
            application where a 3x10mm countersunk screw is required

INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws

REQUIRES: 2mm hex head wrench.

SPECS:    Length:  10mm
          Diameter: 3mm

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 10711-ORNG - Body, Mini Maxx®, orange (painted, decals applied)   Is it time to upgrade your Mini Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come fully-trimmed and ready to mount with pre-applied decals.

399,-

459,-

På lager 1
KJØP
-13%
Traxxas 10711-GRN - Body, Mini Maxx®, green (painted, decals applied)   Is it time to upgrade your Mini Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come fully-trimmed and ready to mount with pre-applied decals.

399,-

459,-

På lager 1
KJØP
-13%
Kyosho MB007 Front Hub Carrier Set (2) (Mini-Z Buggy)

89,-

På lager 1
KJØP
Traxxas 6483X Pinion Gear 13T 1.0M for 5mm Shaft (Machined)  

129,-

139,-

** Ikke på lager
KJØP
-7%
Traxxas 6492X Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

89,-

99,-

På lager 2
KJØP
-10%
Gear, center differential, 44-tooth

135,-

På lager 1
KJØP
Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

89,-

På lager 2
KJØP
This is the 50T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1

39,-

49,-

På lager 4
KJØP
-20%
Traxxas 3760-GRAY - Ultra Shocks (gray) (long) (complete w/ spring pre-load spacers & springs) (4)

439,-

479,-

** Ikke på lager
KJØP
-8%
Traxxas 10728X - Bulkhead, front (upper & lower) Replacement Mini Maxx front upper and lower bulkhead halves. Requires Chassis 10722X

109,-

På lager 3
KJØP
Speed bit, hex driver, straight, 2.0mm (110mm length)

119,-

129,-

På lager 7
KJØP
-8%
Denne erstatter Traxxas 10778 Traxxas 10778X - Ring gear, differential, 47-tooth/ pinion gear, differential, 12-tooth (planetary) (front)

149,-

169,-

På lager 2
KJØP
-12%
Traxxas 10762 - Pinion gear, differential (12/47 ratio) (rear) (requires #10757 with either #10758 or 10760) Pinion Gear Diff Rear (Requires Center Diff/Slipper Clutch) Mini Maxx

79,-

På lager 14
KJØP
Traxxas 10758 - Slipper clutch, complete (fits Mini Maxx®) (requires #10757 & 10762) The Mini Maxx® slipper clutch comes completely assembled and ready to install in your truck with an included 47-tooth spur gear. When installing the slipper clutch, you must replace the standard driveshaft with a shorter 10757-series driveshaft and add the 10762 differential pinion gear.

269,-

289,-

På lager 3
KJØP
-7%
Speed bit, hex driver, straight, 2.5mm (110mm length)

119,-

129,-

På lager 3
KJØP
-8%
Traxxas 10757 - Driveshaft, center, plastic (requires #10762 with either #10758 or 10760) Use this short driveshaft when installing the optional 10758 slipper clutch or 10760 and 10760R center differentials. When using the short driveshaft, you must also use differential pinion gear 10762.

59,-

På lager 6
KJØP
Speed Bits Handle Medium Speed bit handle, medium (one piece)

69,-

79,-

På lager 7
KJØP
-13%
Traxxas 10737 - Skid plate, front (1), rear (1)

109,-

På lager 4
KJØP
Skidplate Set Front & Rear with Rubber Impact Cushion XRT Skid plate, front (1), rear (1)/ rubber impact cushion (1) Front and rear skid plates with rubber impact cusion

119,-

149,-

På lager 3
KJØP
-20%
This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball cups  Connects steering assembly to each steering block   INCLUDES Left and Right Toe Link   SPECIFICATIONS  Total Length: 6.8" (173mm)  Length between Ball Cup Centers: 6.2" (158mm)

109,-

119,-

På lager 1
KJØP
-8%
Traxxas 7734X - X-Maxx Rear Bumper Mount and Bumper Support X-Maxx® rear bumper mount and bumper support

89,-

På lager 2
KJØP
This is the Rear Bumper for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   SPECIFICATIONS  Length: 7.9" (202mm)  Height: 1.6" (41mm)

79,-

På lager 3
KJØP
X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

149,-

På lager 2
KJØP
Bulkhead Front Lower XRT Bulkhead, front (lower) Replacement XRT™ front lower bulkhead

189,-

199,-

På lager 3
KJØP
-5%
Bulkhead Front Upper XRT and X-maxx Bulkhead, front (upper) Replacement front upper bulkhead

69,-

79,-

** Ikke på lager
KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png