Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / 4-TEC 2.0 VXL 1/10 AWD Chassis / Traxxas 2435 Pinion Gear 35T 48P

Traxxas 2435 Pinion Gear 35T 48P

Art.nr: TRX 2435

35,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Gear, 35-T pinion (48-pitch)/ set screw

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing RC PTFE Bearing (12x18x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6026BS/10) RC Telfon Bearing (12x18x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

139,-

KJØP
-14%
Hovedbilde Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing RC PTFE Bearing (6x12x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6016BS/10) RC Telfon Bearing (6x12x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Xray 302291 T2 Steel Steering Bushing (2+2)
Xray 302291 T2 Steel Steering Bushing (2+2)
Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long. Feature: •For: Xray T2 / T3 / T4 •Material: Steel •Color: Black Include: •Steel Steering Bushing (Short) (2 pcs) •Steel Steering Bushing (Long) (2 pcs)

259,-

KJØP
Hovedbilde Traxxas 3752 Stub Axle Carriers (2)
Traxxas 3752 Stub Axle Carriers (2)
This is a pair of Stub Axle Carriers                for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

KJØP
Hovedbilde Yeah Racing TATT-026BU Aluminium Spur Gear Adaptor Set ... Hovedbilde Yeah Racing TATT-026BU Aluminium Spur Gear Adaptor Set ...
Yeah Racing TATT-026BU Aluminium Spur Gear Adaptor Set ...
Yeah Racing Aluminium Spur Gear Adaptor Set for Tamiya TT02 Blue Description: Aluminum spur gear adaptor plate and spacer set for securely mounting your spur gear on your TT02, this allows for a more flat installation and prevents it from bending under hard acceleration! Feature: For: Tamiya TT02 Material: Aluminum Color: Blue Include: Aluminum Spur Gear Adaptor (1 pc) Collar (1 pc) Screws (4 pcs) Pin (1 pc)

99,-

KJØP
Hovedbilde HPI 113706 Racing Spur Gear 66 Tooth
HPI 113706 Racing Spur Gear 66 Tooth
This is the Stock 66T Spur Gear for the HPI RS4 Sport 3 Flux Falken Porsche. FEATURES Molded plastic construction INCLUDES 66T Spur Gear

79,-

KJØP
Hovedbilde Traxxas 4685 Slipper Friction Pegs (12)
Traxxas 4685 Slipper Friction Pegs (12)
These are replacement slipper friction pegs for all of the TRAXXAS kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc... FEATURES: Made of RULON INCLUDES: Twelve pegs SPECS:    length - 3.5mm           diameter - 3mm COMMENTS: These pegs go in the holes on the side of the spur gear.

55,-

KJØP
Hovedbilde RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
RPM Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.  

159,-

Ikke på lager
Hovedbilde RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ... Hovedbilde RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ...
RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ...
RPM Mount for Rear Bumper or Wheelie Bar for 2WD Slash, Rustler, Stampede & Bandit - Blue Replaces Traxxas stock #3677 Quick Notes: Fits Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

KJØP
Hovedbilde Traxxas 3982 Washer 6x8x5 T-Maxx 2.5 (10)
Traxxas 3982 Washer 6x8x5 T-Maxx 2.5 (10)
These are Plastic Washers from Traxxas.  This will work of the Nitro Rustler.   FEATURES Plastic washers   INCLUDES Ten Washers   REQUIREMENTS Traxxas Nitro Rustler   SPECIFICATIONS 6x8x.5

19,-

KJØP
Hovedbilde Traxxas 5261 Air Filter Foam Inserts Oiled (3)
Traxxas 5261 Air Filter Foam Inserts Oiled (3)
This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine and 3.3 FEATURES Constructed of foam and pre-oiled to trap dirt INCLUDES Three Air FIlter Inserts for the Traxxas 2.5 and 3.3 engine REQUIREMENTS Installing in air filter boot on engine SPECIFICATIONS Height: 0.87" (22mm) Diameter: 0.98" (35mm)

79,-

89,-

KJØP
-11%
Hovedbilde RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

KJØP
-11%
Hovedbilde Traxxas 5833A Nerf Bars Low CG Blue
Traxxas 5833A Nerf Bars Low CG Blue
These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES Plastic construction, blue in color For use with the Low CG chassis in Black, or Blue Fastens to sides of chassis to absorb impacts INCLUDES Two Nerf Bars

49,-

KJØP
Hovedbilde Traxxas 4859 Flathead screw M3x10
Traxxas 4859 Flathead screw M3x10
Screws, 3x10mm flat-head machine (hex drive) (4)

25,-

KJØP
Hovedbilde Traxxas 8341R Turnbuckles Front and Rear Alu Red (set)
Traxxas 8341R Turnbuckles Front and Rear Alu Red (set)
Turnbuckles, aluminum (red-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench

489,-

KJØP
Hovedbilde RPM 73865 Nerf Bars for Slash 2WD LCG Chassis - ...
RPM 73865 Nerf Bars for Slash 2WD LCG Chassis - ...
RPM Nerf Bars for Slash 2WD LCG Chassis - Blue replacement for Traxxas #5833, #5833A & #5833G nerf bars Quick Notes: Stock replacement for Traxxas #5833, #5833A & #5833G nerf bars Sold in pairs Made in the USA HCG Nerf Bars are also available The chassis layout of the low center of gravity chassis (LCG) Slash 2WD is different than the original high center of gravity chassis (HCG), requiring a different nerf bar design. Our Slash 2WD LCG nerf bars fix that problem and are a direct, perfect fit! RPM Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed with our limited lifetime warranty against breakage. Tech Notes: RPM Nerf Bars are stock replacement parts, sold in pairs and work with all stock Traxxas chassis running Traxxas #5833, #5833A & #5833G nerf bars.

99,-

KJØP
Hovedbilde RPM 80375 Front Bearing Carriers for 2WD Slash, Nitro ...
RPM 80375 Front Bearing Carriers for 2WD Slash, Nitro ...
RPM Front Bearing Carriers for 2WD Slash, Nitro Slash, Stampede & Rustler - Blue Replaces stock Traxxas #3736 Quick Links: Fits Traxxas 2WD Slash, Nitro Slash, Rustler, Stampede & Bandit VXL Replaces stock Traxxas #3736 5x11x4mm. bearings not included Optional matching Rear Bearing Carriers are also available Optional matching Caster Blocks are also available RPM bearing carriers are the perfect solution for a nearly indestructible front axle carrier to handle your toughest race or bash session. Our bearing carriers are so strong; we guarantee that they won’t ever break! Molded in black or blue from our trademark blend of engineering grade nylons. When used in conjunction with our Rear Bearing Carriers, you’ll never have to worry about damaged bearing carriers again! Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

129,-

KJØP
Hovedbilde RPM 80385 Rear Bearing Carriers Rust/Stamp/Slsh ...
RPM 80385 Rear Bearing Carriers Rust/Stamp/Slsh ...
RPM Rear Bearing Carriers for 2WD Slash, Nitro Slash, Stampede, Rustler & Bandit - Blue Replaces stock Traxxas #3752 Quick Notes: Fits the Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces stock Traxxas #3752 5x11x4mm. bearings not included Not for use on 4×4 versions of the Rustler, Stampede or Slash Identical in strength and performance as our Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not break! Molded in black or blue. Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings (not included). Later moels use a 5x11x4mm bearing as a stock size and can be directly transferred to RPM versions. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

89,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight ... Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight ...
M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight ...
M-DRIVE Hex/Allen Wrench Spare Tip - 1.5mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 1.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 electric motor pinions (most 1/10 cars)

39,-

KJØP
Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex Hovedbilde M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex
M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex
M-DRIVE Hex/Allen Wrench Spare Tip - 2mm Straight Hex High quality hex/allen wrench spare HSS steel tip. Specs: Length: 100mm Tip/Bits Hex Size: 2mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with countersunk head M3 hex screws with button head

39,-

KJØP
Hovedbilde Traxxas 9420 Bumper Chassis Front Drag Slash
Traxxas 9420 Bumper Chassis Front Drag Slash
Traxxas Bumper Chassis Front Drag Slash Bumper, chassis, front (upper & lower)

85,-

KJØP
Hovedbilde RPM 80245 Front Arms for the 2WD: Slash, Nitro Slash, ...
RPM 80245 Front Arms for the 2WD: Slash, Nitro Slash, ...
RPM Front Arms for the 2WD: Slash, Nitro Slash, Rustler & Stampede - Blue Replaces stock Traxxas #3631 Quick Notes: Fits all versions of the Traxxas 2WD: Slash, Nitro Slash, Stampede & Rustler Nearly 25% lighter than stock Replaces stock Traxxas #3631 RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for a superior ride and stability over the roughest tracks and terrain.

109,-

KJØP
Hovedbilde Traxxas 4930R Front Left/Right Bulkhead Gray T-Maxx ...
Traxxas 4930R Front Left/Right Bulkhead Gray T-Maxx ...
This is the Left and Right Front Bulkheads for the T-Maxx 3.3 and E-maxx. FEATURES: Fastens to front skidplate and holds front diff in place           Gray in color, constructed of hardened plastic INCLUDES: Left and Right Front Bulkheads for the T-Maxx 3.3 an E-Maxx REQUIRES: Fastening to skidplate and differential  

99,-

KJØP
Hovedbilde Traxxas 6431 Splitter Mount XO-1
Traxxas 6431 Splitter Mount XO-1
                        This is the Splitter Mount     For the Traxxas 1/7 XO-1. FEATURES: Made of a black composite material INCLUDES: One splitter mount

89,-

KJØP
Hovedbilde Traxxas 1765 Rubber Diaphragm Plastic Shock
Traxxas 1765 Rubber Diaphragm Plastic Shock
   These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4

29,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png