Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / HPI Racing RS4 Sport 4 / HPI 113706 Racing Spur Gear 66 Tooth

HPI 113706 Racing Spur Gear 66 Tooth

Art.nr: 113706

79,-

Hpi Racing

Hpi Racing
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Stock 66T Spur Gear for the HPI RS4 Sport 3 Flux Falken Porsche.

FEATURES

Molded plastic construction

INCLUDES

66T Spur Gear

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde Yeah Racing MG-48035 Aluminum 7075 Hard Coated Motor ... Hovedbilde Yeah Racing MG-48035 Aluminum 7075 Hard Coated Motor ...
Yeah Racing MG-48035 Aluminum 7075 Hard Coated Motor ...
Yeah Racing (#MG-48035) Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 35 Teeth The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Material: 7075 Aluminum Color: Titanium Teeth: 35 Set Screw (1 pc)   How to calculate Final Gear Ratio? For example, if your car has the following setting: Motor Gear: 25 Spur Gear: 84 Pulley: 19 Gear Differential: 38 Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72.   Motor Turn used based on Final Gear Ratio: 3.5T: 9.5-10 4.0T: 8.9-9.5 8.5T: 6.4-7.0 The above guideline is for reference only. The recommended motor turn may vary depending on different brands. More information can be found on motors' official websites.   Review from RC Driver, Issue 108, December 2012 In electric RC, the pinion gear is meshed with the spur gear and provides power to drive train. A quality pinion gear will provide maximum transfer of speed and power to the motor. “I am a fan of precision manufactured, quality pinion gears that when properly meshed with a new or good spur are totally silent! These gears from Yeah Racing certainly fill the bill.” By Chris Kovachevich, RC Driver Issue 108, December 2012   Features: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium   Specifications: Pitch: 48 Teeth: 35   Includes: 48 Pitch Pinion 35 Teeth (1 Pc) Set Screw (1 pc)

59,-

KJØP
Hovedbilde Kyosho FA556-68 SPUR GEAR 68T EP FAZER 2.0
Kyosho FA556-68 SPUR GEAR 68T EP FAZER 2.0
SPUR GEAR 68T EP FAZER 2.0

89,-

KJØP
Hovedbilde Yeah Racing YB6015B/S10 RC PTFE Bearing (6x10x3mm) ...
Yeah Racing YB6015B/S10 RC PTFE Bearing (6x10x3mm) ...
Yeah Racing YB6015B/S10 RC PTFE Bearing (6x10x3mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6015BS/10) RC Telfon Bearing (6x10x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Kyosho FAW218 - Aluminium Motor Heatsink EP Fazer-Rage ...
Kyosho FAW218 - Aluminium Motor Heatsink EP Fazer-Rage ...
Aluminium Motor Heatsink EP Fazer-Rage 2.0

199,-

KJØP
Hovedbilde Kyosho FAW217 - Motor Mount HD EP Fazer-Rage 2.0
Kyosho FAW217 - Motor Mount HD EP Fazer-Rage 2.0
Motor Mount HD EP Fazer-Rage 2.0

279,-

KJØP
Hovedbilde Robinson Racing 2035 Pinion Gear Hardened 5mm 48P 35T
Robinson Racing 2035 Pinion Gear Hardened 5mm 48P 35T
This is the Robinson Racing Hardened 35 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steel May be used on motors with a 5mm shaft including Traxxas, Associated and HPI models INCLUDES: 35 Tooth 48 Pitch Pinion Gear with 4mm Set Screw REQUIRES: 2mm hex wrench SPECS:    Number of Teeth: 35 Pitch: 48 Hole Diameter: 5mm Outer Diameter: 0.69" (17.5mm)       (11)

189,-

KJØP
Hovedbilde Yeah Racing BBG-0080BK Aluminum Big Bore Go 80mm ... Hovedbilde Yeah Racing BBG-0080BK Aluminum Big Bore Go 80mm ...
Yeah Racing BBG-0080BK Aluminum Big Bore Go 80mm ...
Yeah Racing Aluminum Big Bore Go 80mm Damper Set 2pcs for 1/10 RC Offroad Buggy Black Description: Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil. Features: For: RC Car Material: Aluminum Includes: Aluminum Big Bore Go Dampers (2 pcs) Springs (6 pcs) Pillow Balls (4 pcs) Ballstuds (4 pcs) Threaded Ballstuds (4 pcs) Pistons (4 pcs)

329,-

349,-

KJØP
-6%
Hovedbilde HPI Z263 Racing Pin 2x8mm Blitz (12)
HPI Z263 Racing Pin 2x8mm Blitz (12)
This is a package of 2x8mm Pins for the HPI Blitz     FEATURES Steel construction, polished finish   INCLUDES Twelve 2x8mm pins for the HPI Blitz   REQUIREMENTS Installing into vehicle following instructions in manual   SPECIFICATIONS  Length: 0.31" (8mm)  Diameter: 0.08" (2mm)

49,-

KJØP
Hovedbilde Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ... Hovedbilde Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ...
Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ...
Yeah Racing RC Ball Bearing Set     Feature:   For : Tamiya M05 / M05 Ver. II Pro / M06 Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (6pcs) YB6014B  5mm x 11mm x 4mm (12pcs)    Include:   Total Bearing (18 Pcs) RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Ball Bearing For Tamiya M05 Pro / M05 Ver.II Material: Metal   Includes: Bearing (18Pcs) Bearing Oil (15ml) #YA-0215   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

149,-

169,-

KJØP
-12%
Hovedbilde Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ... Hovedbilde Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ...
Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ...
Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI NO ESC   Volkswagen Golf Mk.1 Racing Group 2 byggesett. Racing utgave av førstegenerasjons golf fra 70-tallet. Dekaler til karosseriet medfølger. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere NiMH eller LiPO batteri ESC (fartskontroller) Batterilader PS lakk Anbefales: Tamiya kulelagre Yeah Racing kulelagre Anbefalte farger: PS-1 White PS-6 Yellow PS-7 Orange PS-31 Smoke PS-34 Bright Red TS-12 Oranger TS-16 Yellow TS-26 Pure White TS-29 Semi Gloss Black TS-49 Bright Red   Fra produsenten: Length: 329mm. Image shows assembled and painted kit. The Comeback of a Classic! This R/C model assembly kit depicts the striking Kamei-sponsored Group 2 VW Golf which made a splash in 1970s touring car racing. The polycarbonate body accurately captures the form of the racing Golf, with wide front fenders and a sporty front spoiler. Stickers are included to recreate sponsor logos, numbers, etc.   M-05: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Racing slick tires feature tire inserts.   Specifications ●Length: 329mm, Width: 175mm, Height: 120mm ●Wheelbase: 210mm　●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 25/55mm ●Monocoque Frame ●3-Bevel Differential Gear ●Front-Wheel 2WD ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio = 5.8:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately)   Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

1.495,-

1.595,-

KJØP
-6%
Hovedbilde Yeah Racing TRX4-029 Stainless Steel Front Hood Vent ... Hovedbilde Yeah Racing TRX4-029 Stainless Steel Front Hood Vent ...
Yeah Racing TRX4-029 Stainless Steel Front Hood Vent ...
Yeah Racing Stainless Steel Front Hood Vent Plate Type B for Traxxas TRX-4 Description: Add scale realism to your Traxxas TRX-4 body with these stainless steel Diamond plates, comes with double sided mounting tape cut to match the plates for easy installation.   Feature: For: Traxxas TRX-4 Body Material: Steel Color: Silver   Include: Metal Plates (2 pcs) Mounting Hardware (1 pack)

79,-

KJØP
Hovedbilde Tamiya 86034 PS-34 Polycarb Spray Bright Red 3 oz
Tamiya 86034 PS-34 Polycarb Spray Bright Red 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-34 Bright Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86006 PS-6 Polycarbonate Spray Yellow 3 oz
Tamiya 86006 PS-6 Polycarbonate Spray Yellow 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-6 Yellow).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde M-Drive MD21120 Pro TiN Allen Straight Hex Spare Bits ...
M-Drive MD21120 Pro TiN Allen Straight Hex Spare Bits ...
M-DRIVE PRO TiN Hex/Allen Wrench Spare Tip - 2mm Straight Hex High quality PRO level hex/allen wrench spare hardened steel tip with TiN coating.   Specs: Length: 100mm Tip/Bits Hex Size: 2mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: M3 hex screws with countersunk head M3 hex screws with button head

69,-

KJØP
Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde M-DRIVE Hex/Nut Driver Tool - 4mm Hovedbilde M-DRIVE Hex/Nut Driver Tool - 4mm
M-DRIVE Hex/Nut Driver Tool - 4mm
M-DRIVE Hex/Nut Driver Tool - 4mm High quality nutdriver wrench tool with black anodized aluminium handles and tough drivers made of HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Nut Driver Size: 4mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts

79,-

KJØP
Hovedbilde Yeah Racing YT-0163 Super Hard Steel Allen Wrench ... Hovedbilde Yeah Racing YT-0163 Super Hard Steel Allen Wrench ...
Yeah Racing YT-0163 Super Hard Steel Allen Wrench ...
Yeah Racing Super Hard Steel Allen Wrench Replacement Tip 1.5mm X 120mm 2 pcs for Hudy/EDS/ Handles Description: Yeah Racing Super Hard Steel precision machined replacement tips, size and shape specially measured and manufactured with tight tolerances for the ultimate R/C building experience. Special treatment processes which results in "Super Hard" tips which lengthens the lifetime and reduces chance of stripping screws!       Features: For: Hudy/EDS/Yeah Racing Tool Handles Material: Steel Color: Black   Includes: Yeah Racing Super Hard Steel Allen Wrench Replacement Tip (2 Pcs)

69,-

KJØP
Hovedbilde RPM 70005 Pro Logo Decal
RPM 70005 Pro Logo Decal
This is a set of RPM Pro Logo Decal Sheets.     FEATURES Three different sizes.  Yellow, blue, black background and white letters   INCLUDES Two sheets (total of 46 decals)   COMMENTS Each page has one large 4" (101mm), 10 medium 1-5/8" (41mm), and  12 small 1" (25mm) decals

59,-

KJØP
Hovedbilde Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  12mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Yeah Racing TT02-004BU Aluminum Adjustable Rear Upper ... Hovedbilde Yeah Racing TT02-004BU Aluminum Adjustable Rear Upper ...
Yeah Racing TT02-004BU Aluminum Adjustable Rear Upper ...
Aluminum Adjustable Rear Upper Arm Set For Tamiya TT02 This is a Yeah Racing Aluminum Rear Upper Arm Set, a handling performance upgrade to the TT02 plastic parts. Yeah Racing constructed this Upper Arm with high grade Aluminum for maximum durability that will withstand the harshest impact and road condition where may break the stock plastic parts. This upper arms upgrade set also allows camber adjustment for users to unleash the potential to achieve the maximum tyre contact during corners for faster cornering speed. Note:Yeah Racing highly recommend to use this item with the Front upper arm set #TT02-003 for best cornering performance and stability.         Features: For: Tamiya TT02 Material: Aluminum Color: Blue   Includes: Rear Upper Arm (2 Set) Turnbuckle (2 pcs) Set Screw (2 pcs) Pin (2 pcs) E-Ring (4 pcs) Manual (1 pc)

179,-

199,-

KJØP
-10%
Hovedbilde Traxxas 1747A Lock Nut Flanged M4 Alu Red (4)
Traxxas 1747A Lock Nut Flanged M4 Alu Red (4)
Lock Nut Flanged M4 Alu Red (4)

99,-

109,-

KJØP
-9%
Hovedbilde Yeah Racing Pinion Gear Super Hard Combo set (48P ... Hovedbilde Yeah Racing Pinion Gear Super Hard Combo set (48P ...
Yeah Racing Pinion Gear Super Hard Combo set (48P ...
Yeah Racing Pinion Gear Super Hard Combo set (48P 15T-20T 6pcs ) Description: The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Feature: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium Specification: Pitch: 48 Teeth: 15~20 3.17mm shaft. Include: 48 Pitch Pinion 15 Teeth (1 Pc) 48 Pitch Pinion 16 Teeth (1 Pc) 48 Pitch Pinion 17 Teeth (1 Pc) 48 Pitch Pinion 18 Teeth (1 Pc) 48 Pitch Pinion 19 Teeth (1 Pc) 48 Pitch Pinion 20 Teeth (1 Pc) Set Screw (6 pcs)

269,-

299,-

KJØP
-10%
Hovedbilde Yeah Racing TATT-026BU Aluminium Spur Gear Adaptor Set ... Hovedbilde Yeah Racing TATT-026BU Aluminium Spur Gear Adaptor Set ...
Yeah Racing TATT-026BU Aluminium Spur Gear Adaptor Set ...
Yeah Racing Aluminium Spur Gear Adaptor Set for Tamiya TT02 Blue Description: Aluminum spur gear adaptor plate and spacer set for securely mounting your spur gear on your TT02, this allows for a more flat installation and prevents it from bending under hard acceleration! Feature: For: Tamiya TT02 Material: Aluminum Color: Blue Include: Aluminum Spur Gear Adaptor (1 pc) Collar (1 pc) Screws (4 pcs) Pin (1 pc)

99,-

KJØP
Hovedbilde Traxxas 2435 Pinion Gear 35T 48P
Traxxas 2435 Pinion Gear 35T 48P
Gear, 35-T pinion (48-pitch)/ set screw

35,-

KJØP
Hovedbilde Traxxas 8932 Caster Blocks (Pair) Maxx
Traxxas 8932 Caster Blocks (Pair) Maxx
Caster blocks (c-hubs), left & right

69,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png