Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Kyosho-El-biler / Kyosho Fazer / Kyosho FAW218 - Aluminium Motor Heatsink EP Fazer-Rage 2.0

Kyosho FAW218 - Aluminium Motor Heatsink EP Fazer-Rage 2.0

Art.nr: FAW218

199,-

Kyosho

Kyosho
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Aluminium Motor Heatsink EP Fazer-Rage 2.0

Produsent

Kyosho

Kyosho

Founded 1963 in Japan, Kyosho has been building products for close to 50 Years!

We want to show the world the value of enjoying life through the hobby of Radio Control. Since its foundation, Kyosho has lived by this philosophy. There is no end to the pursuit of this goal, from each generation to the next, our unceasing search for ways people can have fun leads to continuous idea creation that takes shape in the form of truly innovative products.

Relaterte produkter

 

Hovedbilde Kyosho FA003 Fazer Suspension Arm Set
Kyosho FA003 Fazer Suspension Arm Set
Art.nr: FA003
Copied
Fazer Suspension Arm Set

119,-

KJØP
Hovedbilde Kyosho FA209 Rear Drive Shaft EP Fazer Kobra (58.5mm) ...
Kyosho FA209 Rear Drive Shaft EP Fazer Kobra (58.5mm) ...
Art.nr: FA209
Copied
Rear Drive Shaft EP Fazer Kobra (58.5mm) (2)

139,-

KJØP
Hovedbilde Kyosho FAW205 - Front Hub Set Fazer FZ02 (2) HD - Alu ...
Kyosho FAW205 - Front Hub Set Fazer FZ02 (2) HD - Alu ...
Art.nr: FAW205
Copied
Front Hub Set Fazer FZ02 (2) HD - Alu CNC Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.

539,-

KJØP
Hovedbilde Kyosho FAW207 - HD Differential Shaft Fazer FZ02 (2) Hovedbilde Kyosho FAW207 - HD Differential Shaft Fazer FZ02 (2)
Kyosho FAW207 - HD Differential Shaft Fazer FZ02 (2)
Art.nr: FAW207
Copied
HD Differential Shaft Fazer FZ02 (2)  

189,-

KJØP
Hovedbilde Kyosho FAW209 - HD TC Centre Shaft FAZER 2.0 (S) Hovedbilde Kyosho FAW209 - HD TC Centre Shaft FAZER 2.0 (S)
Kyosho FAW209 - HD TC Centre Shaft FAZER 2.0 (S)
Art.nr: FAW209B
Copied
HD TC Centre Shaft FAZER 2.0 (S) CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.

149,-

KJØP
Hovedbilde Kyosho FAW211 - HD Centre Shaft Cup Rear Fazer 2.0 - ... Hovedbilde Kyosho FAW211 - HD Centre Shaft Cup Rear Fazer 2.0 - ...
Kyosho FAW211 - HD Centre Shaft Cup Rear Fazer 2.0 - ...
Art.nr: FAW211
Copied
HD Centre Shaft Cup Rear Fazer 2.0 - Steel (F) Durable steel front center shaft cup. Precision CNC machined for heavy duty use.

129,-

KJØP
Hovedbilde Kyosho FAW212 - HD Centre Shaft Cup Rear Fazer 2.0 - ... Hovedbilde Kyosho FAW212 - HD Centre Shaft Cup Rear Fazer 2.0 - ...
Kyosho FAW212 - HD Centre Shaft Cup Rear Fazer 2.0 - ...
Art.nr: FAW212
Copied
HD Centre Shaft Cup Rear Fazer 2.0 - Steel (R)  

129,-

KJØP
Hovedbilde Kyosho FAW217 - Motor Mount HD EP Fazer-Rage 2.0
Kyosho FAW217 - Motor Mount HD EP Fazer-Rage 2.0
Art.nr: FAW217
Copied
Motor Mount HD EP Fazer-Rage 2.0

279,-

KJØP

Kunder kjøpte også

Hovedbilde HPI Z263 Racing Pin 2x8mm Blitz (12)
HPI Z263 Racing Pin 2x8mm Blitz (12)
This is a package of 2x8mm Pins for the HPI Blitz     FEATURES Steel construction, polished finish   INCLUDES Twelve 2x8mm pins for the HPI Blitz   REQUIREMENTS Installing into vehicle following instructions in manual   SPECIFICATIONS  Length: 0.31" (8mm)  Diameter: 0.08" (2mm)

49,-

KJØP
Hovedbilde HPI 113706 Racing Spur Gear 66 Tooth
HPI 113706 Racing Spur Gear 66 Tooth
This is the Stock 66T Spur Gear for the HPI RS4 Sport 3 Flux Falken Porsche. FEATURES Molded plastic construction INCLUDES 66T Spur Gear

79,-

KJØP
Hovedbilde Yeah Racing BBG-0080BK Aluminum Big Bore Go 80mm ... Hovedbilde Yeah Racing BBG-0080BK Aluminum Big Bore Go 80mm ...
Yeah Racing BBG-0080BK Aluminum Big Bore Go 80mm ...
Yeah Racing Aluminum Big Bore Go 80mm Damper Set 2pcs for 1/10 RC Offroad Buggy Black Description: Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil. Features: For: RC Car Material: Aluminum Includes: Aluminum Big Bore Go Dampers (2 pcs) Springs (6 pcs) Pillow Balls (4 pcs) Ballstuds (4 pcs) Threaded Ballstuds (4 pcs) Pistons (4 pcs)

329,-

349,-

KJØP
-6%
Hovedbilde Robinson Racing 2035 Pinion Gear Hardened 5mm 48P 35T
Robinson Racing 2035 Pinion Gear Hardened 5mm 48P 35T
This is the Robinson Racing Hardened 35 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steel May be used on motors with a 5mm shaft including Traxxas, Associated and HPI models INCLUDES: 35 Tooth 48 Pitch Pinion Gear with 4mm Set Screw REQUIRES: 2mm hex wrench SPECS:    Number of Teeth: 35 Pitch: 48 Hole Diameter: 5mm Outer Diameter: 0.69" (17.5mm)       (11)

189,-

KJØP
Hovedbilde Kyosho FAW217 - Motor Mount HD EP Fazer-Rage 2.0
Kyosho FAW217 - Motor Mount HD EP Fazer-Rage 2.0
Motor Mount HD EP Fazer-Rage 2.0

279,-

KJØP
Hovedbilde Yeah Racing YB6015B/S10 RC PTFE Bearing (6x10x3mm) ...
Yeah Racing YB6015B/S10 RC PTFE Bearing (6x10x3mm) ...
Yeah Racing YB6015B/S10 RC PTFE Bearing (6x10x3mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6015BS/10) RC Telfon Bearing (6x10x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde Kyosho FA556-68 SPUR GEAR 68T EP FAZER 2.0
Kyosho FA556-68 SPUR GEAR 68T EP FAZER 2.0
SPUR GEAR 68T EP FAZER 2.0

89,-

KJØP
Hovedbilde Yeah Racing MG-48035 Aluminum 7075 Hard Coated Motor ... Hovedbilde Yeah Racing MG-48035 Aluminum 7075 Hard Coated Motor ...
Yeah Racing MG-48035 Aluminum 7075 Hard Coated Motor ...
Yeah Racing (#MG-48035) Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 35 Teeth The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Material: 7075 Aluminum Color: Titanium Teeth: 35 Set Screw (1 pc)   How to calculate Final Gear Ratio? For example, if your car has the following setting: Motor Gear: 25 Spur Gear: 84 Pulley: 19 Gear Differential: 38 Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72.   Motor Turn used based on Final Gear Ratio: 3.5T: 9.5-10 4.0T: 8.9-9.5 8.5T: 6.4-7.0 The above guideline is for reference only. The recommended motor turn may vary depending on different brands. More information can be found on motors' official websites.   Review from RC Driver, Issue 108, December 2012 In electric RC, the pinion gear is meshed with the spur gear and provides power to drive train. A quality pinion gear will provide maximum transfer of speed and power to the motor. “I am a fan of precision manufactured, quality pinion gears that when properly meshed with a new or good spur are totally silent! These gears from Yeah Racing certainly fill the bill.” By Chris Kovachevich, RC Driver Issue 108, December 2012   Features: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium   Specifications: Pitch: 48 Teeth: 35   Includes: 48 Pitch Pinion 35 Teeth (1 Pc) Set Screw (1 pc)

59,-

KJØP
Hovedbilde Kyosho FAW209 - HD TC Centre Shaft FAZER 2.0 (S) Hovedbilde Kyosho FAW209 - HD TC Centre Shaft FAZER 2.0 (S)
Kyosho FAW209 - HD TC Centre Shaft FAZER 2.0 (S)
HD TC Centre Shaft FAZER 2.0 (S) CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.

149,-

KJØP
Hovedbilde Kyosho FAW211 - HD Centre Shaft Cup Rear Fazer 2.0 - ... Hovedbilde Kyosho FAW211 - HD Centre Shaft Cup Rear Fazer 2.0 - ...
Kyosho FAW211 - HD Centre Shaft Cup Rear Fazer 2.0 - ...
HD Centre Shaft Cup Rear Fazer 2.0 - Steel (F) Durable steel front center shaft cup. Precision CNC machined for heavy duty use.

129,-

KJØP
Hovedbilde G.T.Power BLUETOOTH CAR SOUND AND LIGHT SYSTEM
G.T.Power BLUETOOTH CAR SOUND AND LIGHT SYSTEM
For: 1/10 RC bil Materiale: plast Farge svart Kontrolleres via APP – Bluetooth. Innebygd 58 typer billyd og passer for nesten alle typer RC-biler Inkludert spesifikk lydeffekt Innebygd mange typer lysmodus Fri programmerbar via programvare Innebygd høy effektiv forsterker med liten størrelse og enkel å installere Spesifikasjon: Inngangsspenning: 4,5V – 6V Høyttalerinngangsspenning: 6V – 26V Lydutgangseffekt: Maks 10W Høyttaler størrelse: 80x57x30mm (Kabel lengde 25 cm) Kontrollbord Størrelse: 66.3x44x14.8mm

1.245,-

1.295,-

KJØP
-4%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png