Hopp til innhold
-3%

Traxxas 2080R Servo Micro Metal Gear Sealed

Art.nr: TRX 2080R

579,-

599,-

- 3%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 2080R

Servo, micro, waterproof, metal gear
The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience.

Accessory part for these models:

  • 1/16 E-Revo® VXL
  • 1/16 E-Revo®
  • 1/16 Slash 4WD
  • 1/16 Slash® 4X4
  • 1/16 Summit™

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 2080A
Copied
Traxxas Servo 2080A Micro Sealed Servo, micro, waterproof.   Length: 29,5 mm Height: 29 mm Width: 14 mm Max Voltage: 6,0 V Speed at 6,0V: 0,11 sec/60°

349,-

369,-

KJØP
-5%
Art.nr: BULK TRX 2080A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "BULK" Traxxas Servo 2080A Micro Sealed Servo, micro, waterproof.   Length: 29,5 mm Height: 29 mm Width: 14 mm Max Voltage: 6,0 V Speed at 6,0V: 0,11 sec/60°

289,-

369,-

Ikke på lager
-22%
Art.nr: SW-0250MG PLUS
Copied
SAVÖX SW-0250MG-PLUS - Water Proof Metal-Geared Mini Servo The SW-0250MG-PLUS is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Ideal for cars and boats subject to water or snow Ideal for Traxxas 1/16 vehicles Specifications: Torque @4.8V: 3.5kg/cm Torque @6V: 5kg/cm Speed @4.8V: 0.14 sec/60 deg Speed @6V: 0.11 sec/60 deg Dimensions L x W x H: 29.5 x 14.0 x 32.5mm Weight: 25g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 80mA @4.8V, 100mA @6.0V Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 21 Tooth Bearings: 1BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

495,-

KJØP

Kunder kjøpte også

NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon.   This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High  Current Connector and Integrated Balance Connector   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 2S2P  Continuous Discharge: 25C (55A)  Max Burst Rate: 50C (110A)  Watt Hours: 16.28  Charge Rate: 1C (2.2A)  Max Charge Rate: 2C (4.4A)  Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm)  Weight: 4.2oz (118g)

549,-

569,-

KJØP
-4%
    Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 3s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 3s

169,-

KJØP
These are the 1/16 scale GTR Hard Anodized Teflon-Coated Shocks from Traxxas.     These fit the: 1/16 E-Revo 1/16 Slash                                                                                   FEATURES: Fully assembled                                                      Hard anodized, Teflon coated bodies                                  Titanium shock shafts                                                                                                                               INCLUDES: Two (2) Front Shocks                                                      Two (2)Rear Shocks                                                      One (1) Bottle of 40wt Silicone Shock Oil                                Instruction sheet                                                                                                                                   REQUIRES:  Shock Springs                                                                                                                                       SPECS:    Length Fully Compressed (center hole to center hole): 39mm (1.5")    Length Fully Extended (center hole to center hole): 47mm (1.9") 

795,-

KJØP
This is the Exo-Carbon Finish Wing for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Exo-carbon finish INCLUDES: One Wing           One Decal Sheet REQUIRES: Installation on the vehicle SPECS:    Length: 118mm (4.6")           Width: 43mm (1.7")           Height: 29mm (1.1")

125,-

KJØP
This is the Clear Body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR. FEATURES: Plastic construction Clear INCLUDES: One Clear 1/16 E-Revo Body One Window Masking Set One Decal Set REQUIRES: Polycarbonate paint of modeler's choice Installation on the vehicle SPECS:    Length: 283mm (11.1") Width: 100mm (3.9") Height: 75mm (3")       (B5)

239,-

259,-

KJØP
-8%
These are the optional Black Rate GTR Shock Springs for use on the                  Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Steel construction           Red in color           2.22 rate, black INCLUDES: Two GTR Shock Springs REQUIRES: Installation on the vehicle SPECS:    Length: 19.75mm (0.78")           Outer Diameter: 13.75mm (0.54")           Inner Diameter: 10.95mm (0.43")           Wire Diameter: 1.4mm (0.06")

49,-

KJØP
This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction           Grey in color INCLUDES: One 19T 48P Pinion Gear           One Set Screw REQUIRES: Installation  

39,-

Ikke på lager
This is the Traxxas 21T 48P Pinion Gear FEATURES: Made of steel INCLUDES: One pinion gear           One setscrew, M3.0x4.0mm SPECS:    Teeth: 21           Pitch: 48           Length: 10.5mm           Diameter: 12mm           Hole diameter: 3.4mm           Length of teeth: 6.1mm

39,-

KJØP
This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Heat Sink with tube of Thermal Paste and Instructions

89,-

99,-

KJØP
-10%
  Truck Tires on 2.2" Wheels Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit.   Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 92.5 mm Tire Width: 43.5 mm Weight (each): 87 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Pioneer 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 10.5 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

269,-

289,-

KJØP
-7%
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 Shore-Narrow (4)

149,-

KJØP
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
is is the Skid Plate Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Skidplate           One Rear Skidplate           One Transmission Skid Plate           Two Steering Servo Guards           One Steering Servo Cover Plate REQUIRES: Installation on the vehicle

129,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png