Traxxas

-7%

Traxxas 2075 Servo Digital BB Sealed

Art.nr: TRX 2075

549,-

~~589,-~~

- 7%

Traxxas

Traxxas

På lager: 5

På lager i vår butikk i Oslo

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Traxxas 2075 - Waterproof Digital Servo

The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and a transit time of 0.16 sec /60°.

SPECS:

Ball Bearing
Digital High-torque
Power: 125 oz-in (9kg/cm)
Transit Time: 0.17 sec/60°
Size: L=55mm, H= 42.75mm, W=21.5mm

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde Traxxas 2056 Servo High Torque Waterproof

Hovedbilde Traxxas 2056 Servo High Torque Waterproof

Traxxas 2056 Servo High Torque Waterproof

Art.nr: TRX 2056

Copied

This is the replacement High Torque Waterproof Servo for many Traxxas cars. FEATURES: Plastic waterproof blue case INCLUDES: One high torque waterproof servo with J style connector REQUIRES: Mounting in the car. SPECS: Length: 2.16" (55mm) Width: .78" (20mm) Height: 1.69" (43mm) Weight: 1.58oz (45g)

399,-

419,-

På lager 2

-5%

Hovedbilde Traxxas 2075X Servo Digital Metal Gear with BB and ...

Hovedbilde Traxxas 2075X Servo Digital Metal Gear with BB and ...

Traxxas 2075X Servo Digital Metal Gear with BB and ...

Art.nr: TRX 2075X

Copied

Servo, digital high-torque, metal gear (ball bearing), waterproof Length: 41 mm Height: 42 mm Width: 20 mm Max Voltage: 6,0 V Features: Water Proof, Digital, Metal Gears

699,-

749,-

På lager 1

-7%

Hovedbilde Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...

Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...

Art.nr: TRX 2255

Copied

High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° at 6.0V Torque: 400 oz-in at 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

På lager 4

-8%

Hovedbilde Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed

Hovedbilde Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed

Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed

Art.nr: TRX 2270

Copied

Traxxas 2270 High-Torque Digital Metal Gear Servo The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 17kg/cm of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup. SPECIFICATIONS: Torque: 236 oz-in @ 6.0V Speed: 0.175 sec/60° @ 6.0V Waterproofing: Sealed case with O-ring Gears: Metal Case: Plastic with full ball bearings Dimensions: 55 mm H x 44.5 mm L x 20 mm W Length: 55 mm Height: 44,5 mm Width: 20,0 mm Speed at 6,0V: 0,175 sec/60° Torque at 6,0V: 17 kg/cm Features: Digital , Metal Gears

749,-

799,-

På lager 4

-6%

Hovedbilde Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed

Hovedbilde Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed

Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed

Art.nr: TRX 2275

Copied

Traxxas 2275 - Servo 25Kg Digital BB Metal Gear Sealed Specs: Motor Type: Brushed Operating Voltage: 6-7.4V DC Torque: 25 kg/cm (6V) - 35kg (7.4V) Speed: 0.25 sec/60° (6V) - 0.16 sec/60° (7.4V) Weight: 67g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital Weight: 67 g Max Voltage: 7,4 V Speed at 6,0V: 0,25 sec/60° Speed at 7,2/7,4V: 0,16 sec/60° Torque at 6,0V: 25 kg/cm Torque at 7,2/7,4V: 35 kg/cm Features: Digital , Dual Ball Bearing , HV , Metal Gears

899,-

949,-

På lager 2

-5%

Hovedbilde Traxxas Servo 2070 Digital BB

Traxxas Servo 2070 Digital BB

Art.nr: TRX 2070

Copied

Traxxas 2070 - Digital Ball Bearing Servo Ball Bearing Digital High-torque Power: 9kg/cm Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

429,-

469,-

På lager 4

-9%

Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Art.nr: TRX 2250

Copied

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time. Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

På lager 2

-10%

Hovedbilde Traxxas 2055 High Torque Servo

Traxxas 2055 High Torque Servo

Art.nr: TRX 2055

Copied

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS: Length: 1.6" (40.5mm) Width: .8" (20.5mm) Height: 1.43" (36mm) Torq: 80 oz/in Weight: 1.58oz (45g)

389,-

419,-

På lager 3

-7%

Hovedbilde Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...

Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...

Art.nr: TRX 2280

Copied

Traxxas 2280 - 1/10 Brushless Servo with Full Aluminum Case New Top-of-the-Line 1/10 Servo with Full Aluminum Case! 2280 Specs & Features: High Torque: 43kg/cm 87% more torque than stock Sledge servo 5X more torque for TRX-4 with 2262 external BEC High Speed: 0.13 sec/60° Twice as fast as stock Sledge Full Aluminum Heat Sink Case Full Steel Gears with steel output Brushless motor technology Waterproof Dual ball bearings Factory fit for drop-in installation into 1/10 scale Traxxas models* * Does not fit Traxxas 4-Tec, XO-1, Spartan, or Jato. Some models may require modification. For installation with TRX-4 models with XL-5HV ESC, use Traxxas external BEC (2262) and steel servo horn (8247X).

1.695,-

1.995,-

På lager 2

-15%

Hovedbilde Traxxas 2075R Servo, digital high-speed, metal gear ...

Traxxas 2075R Servo, digital high-speed, metal gear ...

Art.nr: TRX 2075R

Copied

Servo, digital high-speed, metal gear (ball bearing), waterproof

699,-

749,-

På lager 3

-7%

Hovedbilde

"BULK" Traxxas 2075 Digital High Torque Servo

Art.nr: BULK TRX 2075

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is the Digital High Torque Servo for the Traxxas E-Revo RTR ,Traxxas Slash and many other. FEATURES: Plastic blue three piece waterproof case INCLUDES: One Digital High Torque Servo with J style connector REQUIRES: Mounting into vehicle SPECS: Length: 55mm (2.17") Width: 20mm (0.79") Height: 42.3mm (1.67") Torque: 125 oz-in (9kg-cm) Speed: 0.16 sec @ 60°

459,-

589,-

Bulkvarer kan kun kjøpes når de er på lager

-22%

Kunder kjøpte også

Hovedbilde Traxxas 3668 Talon 2.8

Traxxas 3668 Talon 2.8" Rear Tires On All-Star ...

These are a set of Traxxas 2.8" Mounted All Star Wheels and Tires. FEATURES: 2.8" All Star chrome wheels Talon Tires For the Rear of the electric Stampede and Rustler INCLUDES: Two 2.8" mounted Talon tires, All Star chrome wheels and inserts REQUIRES: Installation on vehicle SPECS: Outside diameter: 4.6" (119mm) Width: 2.6" (67.6mm) Inside diameter: 2.8" (71mm) Hex Size: 12mm

359,-

På lager 2

Hovedbilde Traxxas 3792 Dust Cover/Rubber Plug w/Screws

Traxxas 3792 Dust Cover/Rubber Plug w/Screws

This is a Dust Cover and Rubber Plug for the Traxxas Rustler/Stampede FEATURES: Made from black molded nylon For the Traxxas Rustler/Stampede INCLUDES: Dust cover for the Traxxa Rustler 3 x 6 mm round head coarse thread screws (to mount dust cover) Rubber Plug Specs: 3" (77mm) Compatible with Traxxas Telemetry

39,-

Ikke på lager

Hovedbilde Traxxas 6839 Shock Tower Front Slash 4x4

Traxxas 6839 Shock Tower Front Slash 4x4

This is the Front Shock Tower for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: One front shock tower REQUIRES: Installation on chassis SPECS: Length: 71mm (2.80") Width: 49mm (1.93")

75,-

På lager 2

Hovedbilde Traxxas 5552A Slipper Clutch Rebuild Kit Slash 4x4

Traxxas 5552A Slipper Clutch Rebuild Kit Slash 4x4

Denne er også til dem som skal ha TRX 5552 og 5552X This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles. FEATURES: Steel construction INCLUDES: One Steel Disc Three Friction Pads Two Springs One 4mm Lock Nut One 5mm Lock Nut Instructions REQUIRES: Disassembly of slipper clutch

119,-

Ikke på lager

Hovedbilde Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...

Hovedbilde Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...

Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...

Genial til Tamiyabiler! Radio og mottaker. NiMh batteri og USB lader. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker, 6kg analog servo og et 7.2V 2000mAh NiMh-batteri og kompatibel lader. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr. R/C Set - Radioset with Servo, Battery and Charger The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast. What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements. USB NiMh Charger C-U02: A convenient USB charger for recharging your battery quickly and efficiently. 7.2V 2000mAh NiMh Stick Pack (with Tamiya Plug): A high-performance battery that provides the power you need for extended driving sessions. Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle! Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required) Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input C-U02 USB Charger This USB Delta-Peak Charger is a simple and easy to use charger for 2-8 Cell NiMH battery packs. A USB Adaptor with an output of at least 2A is recommended. Specifications: 2-8 Cell NiMH (600-2500mAh) Charging range USB input 5V 1A, (2A Recommended) Delta-Peak Charging Tamiya Battery connector S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

795,-

895,-

På lager 3

-11%

Hovedbilde Dynomax 9531 Connector Tamiya Female 100mm 16AWG

Dynomax 9531 Connector Tamiya Female 100mm 16AWG

Connector Tamiya Female 100mm 16AWG

45,-

På lager 7

Hovedbilde Traxxas 6530X 4-Channel TQi Transmitter

Traxxas 6530X 4-Channel TQi Transmitter

Traxxas 6530 TQi 2.4Ghz 4-Channel Transmitter w/Link Enabled (Transmitter Only) This is a replacement Traxxas TQi 2.4Ghz 4-Channel Transmitter. The TQi transmitter is compatible with the Traxxas Link Wireless Module (TRX 6511) that turns your iPhone, iPad, or iPod touch into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks your radio system for ultimate vehicle control. In addition to adjusting the TQi radio system's advanced features via a visual and intuitive interface, real-time telemetry becomes available through a customizable dashboard. Prepare to unlock the full potential of the TQi 2.4GHz radio system through the Traxxas Link Wireless Module. TQi Transmitter Features: High Output signal for maximum range Integrated internal antenna Simple 2-Button Interface Steering trim and Multi-Function knobs Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points Automatically stores and loads settings for up to 30 Traxxas Link Model Memory enabled models—just switch on and drive, "model selection" is not required. High 13ms frame rate and near-zero latency for responsive control Comfortable ergonomic design Updated steering wheel and foam grip Operates on just 4 AA batteries Traxxas Link Wireless Module Features: Compatible with Apple iPhone, iPad, and iPod touch Use with the powerful Traxxas Link app View real-time telemetry with optional sensors Bluetooth low energy Easy and simple device pairing Powered by TQi transmitter Integrated into transmitter body Quick and easy installation, installs in minutes Traxxas Link Wireless Module included with select Traxxas vehicles Traxxas Link Application Features: Available on the App Store Intuitive iPhone, iPad, and iPod touch interface Customizable Dashboard Dial or digital readout gauges Up to nine gauges can be displayed at one time Set threshold warnings and log maximums, minimums, or averages Review telemetry feedback via the dashboard recording function that includes sound Instant replay feature captures the previous 60-seconds of dashboard activity Recordings can be named and saved See telemetry feedback from electric and nitro models for speed, temperature, and voltage Edit, save, and share drive profiles Visually manage an unlimited number of models with the Traxxas Link App and see: Transmitter model history Model names Customizable settings Profiles Note: This transmitter does not include the Link Wireless Module, it must be purchased separately (TRX 6511). Traxxas offers this transmitter with the wireless module and one TSM (Traxxas Stability Management) receiver (TRX 6507R).

1.199,-

1.299,-

På lager 1

-8%

Hovedbilde Traxxas 7542 Body Clips (12)

Hovedbilde Traxxas 7542 Body Clips (12)

Traxxas 7542 Body Clips (12)

These are the Body Clips for the Latrax Rally Car from Traxxas. FEATURES Steel construction Sized for the 1/18 scale body on the Latrax Rally Car INCLUDES Twelve Body Clips

29,-

På lager 3

Hovedbilde Bronto Ladekabel - XT60 til Traxxas ID 3s

Bronto Ladekabel - XT60 til Traxxas ID 3s

Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas-ID3 til XT60-plugger. Benyttes for lading av batterier med Traxxas ID3-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Traxxas ID3

125,-

På lager 6

Hovedbilde Bronto Ladekabel - 4mm til Traxxas ID 3s

Bronto Ladekabel - 4mm til Traxxas ID 3s

Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 3s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 3s

169,-

På lager 6

Hovedbilde Top RC Hobby TF-350 RTF

Hovedbilde Top RC Hobby TF-350 RTF

Top RC Hobby TF-350 RTF

Sjøfly Gyrostabilisering Veldig lettflydd Et herlig, kompakt og lite universelt fly. Leveres komplett med radioutstyr, batteri og lader. Med den integrerte gyroen er det meget lettflydd og perfekt for en som vil teste ut modellfly, eller for en mer erfaren som bare vil kosefly uanstrengt. Flyet krever liten plass go tar av fra bakken, snø og vann. Eller send det avgårde fra håndflaten! Gyro Flyhet har integrert gyro som gjør det ekstremt lettflydd. Gyrosystemet stabiliserer flighten både i høyde og sideveis bevegelser slik at tross den korteflykroppen og lille vingespennet blir dette en stabil og morsom modell å fly, selv for en nybegynner. To kanaler Modellen er designet for å være en enkel og rimelig innstegsmodell. Flyet har derfor ingen høyde og sideror, men kontrolleres elektronisk av skyvekraften på de to motorene og oppdriften. Det vil si at piloten kun behøver å fokusere på to ting ved flyving: Høyde og høyre/venstre. Kompakt og solid Flykroppen er laget i EPP. I tillegg er flyets design kompakt og solid. Det skal altså mye til for å skade denne modellen, selv med uerfarne piloter bak spakene. Sjøfly Flykroppen er designet med to store ski integrert i kroppen, noe som mer eller mindre får TF-350 til å oppføre seg som en katamarn. Flyet beveger seg lett på vannet, men vær obs på litt stor svingradius da det ikke har ror. TF-350 slipper vannflater lett ved takeoff, og er enkelt å lande på vannet igjen. PS! For nybegynnere kan det være en fordel å starte med å fly på et jorde e.l, slik at man ikke risikerer uheldige situasjoner ute på vannet hvor det kan være vanskelig å hente inn modellen. Innhold Pakken inneholder fly, radiosender, batteri, lader + bruksanvisning, et par ekstra propeller og et skrujern. Det eneste du behøver utenom eskens innhold er 3x AAA batterier til senderen. Spesifikasjoner Vingespenn 350 mm Lengde 290 mm Høyde 100 mm Vekt 58.3 gram Materiale EPP Flytid 10-12 minutter Batteri 500 mAh Ladetid ca. 30 minutter Rekkevidde ca. 170 meter RTF Ja Gyro Ja

795,-

** Ikke på lager

Hovedbilde Traxxas 3768 Spring Retainers (2)

Traxxas 3768 Spring Retainers (2)

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic. Contains enough parts for two shocks. Fits the shocks on most Traxxas nitro and electric powered vehicles. Two hole piston head for greater dampening or three hole piston head for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with: Two upper and two lower spring retainers Two 2 hole piston head covers Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

På lager 11

Hovedbilde Traxxas 2843X LiPo 2S 7.4V 5800mAh 25C w/iD ...

Traxxas 2843X LiPo 2S 7.4V 5800mAh 25C w/iD ...

Passer til: Stampede 4x4 Bandit Rustler Stampede Slash 4x4 og Slash Ultimate E-Maxx E-Revo 1/10 Slash 2WD Summit 1/10 Antall celler : 2 (7,4volt) Kapasitet : 5800mAh Strøm ledning tykkelse : 12 AWG Balanseringsplugg : JST-XH Max ladestyrke : 2C (10 amp) Kontinuerlig utlading: 25C (145A) Max utladning : 50C (290A) Lengde: 13,50 cm (med ledningen 14,00 cm) Bredde: 4,27 cm Høyde : 2,44 cm Vekt : 312 gram

819,-

899,-

På lager 5

-9%

Hovedbilde Traxxas 2336 Turnbuckles 78mm (2)

Traxxas 2336 Turnbuckles 78mm (2)

This is a Pair of 78mm Steel Turnbuckles from Traxxas. These are links to connect camber, or toe-in on the T-Maxx. FEATURES Steel construction Adjustable without removing from vehicle INCLUDES Two 78mm turnbuckles for the Traxxas T-Maxx REQUIREMENTS Nothing. These are direct replacement parts. SPECIFICATIONS Length: 78mm (3.07") Thread diameter: 3mm (0.11")

29,-

39,-

** Ikke på lager

-26%

Hovedbilde Traxxas 7462G Shocks Green GTR XX-Long without springs ...

Traxxas 7462G Shocks Green GTR XX-Long without springs ...

Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

459,-

** Ikke på lager

-7%

Hovedbilde Traxxas 7461G Shocks Green GTR Long without springs ...

Traxxas 7461G Shocks Green GTR Long without springs ...

Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

459,-

** Ikke på lager

-7%

Hovedbilde Traxxas 7445 Spring Shock White GTR Long 0.810 Pink ...

Traxxas 7445 Spring Shock White GTR Long 0.810 Pink ...

This is the set of Traxxas Long GTR Shock Springs with 0.810 Pink Compression Rate. FEATURES: Steel construction, white in color Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.810 Pink Rate GTR Shock Springs SPECS: Length: 1.8" (45mm) Wire Diameter: 0.043" (1.1mm)

69,-

** Ikke på lager

Hovedbilde Traxxas 7447 Spring Shock White GTR XX-Long 0.884 Pink ...

Traxxas 7447 Spring Shock White GTR XX-Long 0.884 Pink ...

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 0.884 Pink Compression Rate. FEATURES: Steel construction, white in color Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 0.884 Pink Rate GTR Shock Springs SPECS: Length: 2.2" (56mm) Wire Diameter: 0.043" (1.1mm)

59,-

På lager 1

Hovedbilde Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4

Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4

This is the Gear Cover/Motor Wire Hold Down for use on the Traxxas Slash 4X4. FEATURES: Nylon construction Black in color INCLUDES: One Gear Cover One motor wire hold down REQUIRES: Installation on the vehicle

59,-

69,-

På lager 2

-14%

Billowy Power Tamiya plugger 1stk han 1 stk hun

Tamiya plugger 1stk han 1 stk hun

25,-

På lager 23

Hovedbilde Bronto 7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg

Bronto 7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg

7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg Lengde - 135mm Bredde - 47mm Høyde - 24mm

295,-

På lager 1

Hovedbilde Traxxas 3950X Pinion Gear 20T-32P Hardened Steel

Traxxas 3950X Pinion Gear 20T-32P Hardened Steel

Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

På lager 7

Hovedbilde Traxxas 5319X Aluminum Pushrod Red Revo (2)

Traxxas 5319X Aluminum Pushrod Red Revo (2)

These are the (optional) Red Aluminum Pushrods for the Rocker Arms for the REVO from Traxxas These go between the Rocker Arms and the Lower Suspension Arms **Must be used with Progressive-3 Rocker Arm Set FEATURES: Red Aluminum construction INCLUDES: Two Pushrods w/pre-installed rod ends and balls REQUIRES: Installing on the vehicle SPECS: Length: 5.3" (134mm) end to end including rod ends Diameter: 0.20" (5mm)

155,-

På lager 2

Hovedbilde Traxxas 5355 Hollow Balls/Shims Revo

Traxxas 5355 Hollow Balls/Shims Revo

These are the replacement Hollow Balls and Shims for the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction Silver and Black in Color INCLUDES: Four Silver Metal Hollow Balls Four Black Metal Shims REQUIRES: Assembly onto Vehicle

59,-

79,-

På lager 1

-25%

Hovedbilde Traxxas 5380 Front & Rear Differential Housing Revo

Traxxas 5380 Front & Rear Differential Housing Revo

This is the Front and Rear Differential Housing for the REVO from Traxxas. FEATURES: Durable black nylon construction INCLUDES: One diff housing (2 pieces)

49,-

På lager 2