Traxxas

Traxxas 2072X Gear Set 2070 & 2075 Servos

Art.nr: TRX 2072X

249,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Gear set, metal (for 2070, 2075 servos)

Developed for the TRX-4 RC Scale and Trail Crawler, the #2075X steering servo features all-metal gears for rugged, dependable service in extreme conditions. These same gears are now available to upgrade standard #2075 servos to the metal gear set. Upgrade your existing Slash, Summit, 4-Tec 2.0, E-Revo, or E-Maxx steering servos with this high-performance gear set.

Replacing your #2075 servo gears is easier than ever with this all-inclusive kit. Installation should take about 15 minutes with only simple tools required. The included instruction sheet illustrates how the servo is constructed while the helpful installation video walks you through the process.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 9052 Drive Shaft Complete Rear (for Upgrade ...

Traxxas 9052 Drive Shaft Complete Rear (for Upgrade ...

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Replacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

159,-

Hovedbilde RPM 80722 Front A-Arms Black Traxxas Jato (2) replaces ...

RPM 80722 Front A-Arms Black Traxxas Jato (2) replaces ...

RPM Front A-Arms Black Traxxas Jato (2) replaces stock TRX 5531 Quick Notes: – replaces stock Traxxas #5531 – Jato Rear A-arms RPM front A-arms for the Traxxas Jato are designed as dual-purpose A-arms that can handle the rigors of the backyard basher as well as the hardcore racer. These A-arms have been designed to be more rigid than stock, yet under extreme situations will give slightly to prevent them from breaking and reduce the energy from those impacts from transferring into the more fragile components of the vehicle, which can be harder and more expensive to replace. The rigidity of the new A-arms will please even the most demanding of racers. RPM Jato A-arms are designed using stock geometry, making them direct, bolt-in replacement parts. Furthermore, we’ve reduced the clearances around the hinge pins and A-arm mounting areas to help reduce slop in the suspension system, providing better, more consistent camber, caster, toe, and wheelbase settings. RPM Jato A-arms use stock mounting hardware – nothing more to buy. RPM A-arms for the Traxxas Jato are sold in pairs, and are molded in blue or black from our bulletproof blend of top-secret materials for the ultimate combination of strength, durability, & wear-resistance in a lightweight set of A-arms that won’t leave your wallet empty! RPM A-arms are the last set of arms you’ll ever need for your Traxxas Jato!

149,-

Hovedbilde Traxxas 3935 90 Degree Angled Body Clips Revo (10)

Traxxas 3935 90 Degree Angled Body Clips Revo (10)

These are the replacement Body Clips for the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction Silver in Color Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

39,-

Hovedbilde Traxxas 2925X 1200mAh Power Cell NiMH Battery

Traxxas 2925X 1200mAh Power Cell NiMH Battery

NB!! Denne her erstatter TRX 2925 Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type Battery Material NiMH Colour Black Width 7.5 cm Height 16 cm Depth 2 cm Weight 152 g

299,-

319,-

-6%

Hovedbilde Traxxas 7056 Half Shafts Center Front/Rear VXL

Traxxas 7056 Half Shafts Center Front/Rear VXL

These are the Front/Rear Center Half Shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One Front Center Half Shaft One Rear Center Half Shaft Four U-Joints REQUIRES: Installation on the vehicle

75,-

Hovedbilde Traxxas 7057 Yokes Differential & Transmission VXL

Traxxas 7057 Yokes Differential & Transmission VXL

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction Black in color INCLUDES: Two Yokes Two 3x10mm Screw Pins REQUIRES: Installation on the vehicle

39,-

Hovedbilde Traxxas 3760A Ultra Shocks Gray Long (2)

Traxxas 3760A Ultra Shocks Gray Long (2)

Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas for the Bandit. FEATURES: Gray composite bodies Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

259,-

289,-

-10%

Hovedbilde Traxxas 7045R Spur Gear 45T VXL

Traxxas 7045R Spur Gear 45T VXL

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One 45T Spur Gear REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 24.75mm (0.97") Inner Diameter: 5.5mm (0.22") Width: 7mm (0.28")

39,-

Hovedbilde Traxxas 6853X Heavy Duty Rear Stub Axles Slash 4X4 (2) ...

Traxxas 6853X Heavy Duty Rear Stub Axles Slash 4X4 (2) ...

These are the Rear Heavy Duty Stub Axles for the Slash 4x4 from Traxxas FEATURES: Aluminum construction INCLUDES: 2 rear stub axles 2 pins REQUIRES: Installation on vehicle

75,-

Hovedbilde Traxxas 6851X Driveshaft Assembly Front Heavy Duty ...

Traxxas 6851X Driveshaft Assembly Front Heavy Duty ...

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Front driveshaft assembly Screw pin REQUIRES: Installation on vehicle

129,-

Hovedbilde Traxxas 3975R Titan 550 Reverse Rotation 21T Motor

Traxxas 3975R Titan 550 Reverse Rotation 21T Motor

Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1) The Titan® 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque. SPECS: Length to end of armature: 78mm (3.07") Diameter of can: 38mm (1.5") Length of motor leads: 75mm (2.96") Shaft diameter: (3.2mm) 0.125" COMMENTS: For the standard rotation motor, order TRX 3975.

289,-

299,-

-3%

Hovedbilde Traxxas 9095 LED Lights Front & Rear Bumper Complete ...

Hovedbilde Traxxas 9095 LED Lights Front & Rear Bumper Complete ...

Traxxas 9095 LED Lights Front & Rear Bumper Complete ...

Traxxas 9095 - Hoss 4X4 and Stampede 4X4(BL-2S and VXL-3S version, not XL-5 version) LED Light Kit Hoss 4X4 LED Light Kit Built Traxxas Tough™ The Traxxas Hoss 4X4 unleashed a new era of extreme monster truck fun and now there’s a LED light kit built to the same standard. Designed to handle the toughest action and most extreme stunts, the Hoss high-output LED light kit extends your adventures long after dark. A front high-intensity light bar integrates into a new rugged front bumper while bright red tail lights flank the wheelie bar in the replacement rear bumper. A chassis-mounted power supply regulates the voltage for reliable lighting performance without dimming or flickering. Naturally, the entire system is fully waterproof to make your all-weather adventures a reality. Traxxas Innovation Traxxas was the first company in the RC industry to offer waterproof vehicles. Naturally the Hoss 4X4 LED light kit gives you the same freedom to drive where you want and when you want with Traxxas waterproof technology. The light kit also features a regulated power supply to provide stable lighting performance, without flickering or dimming as battery voltage changes. Installation is easy using the included power tap to feed voltage directly from the battery. Hoss 4X4 LED Light Kit (#9095): Efficient, high-intensity LED lighting Front bumper with integrated LED light bar Rear bumper with integrated red LED lights Regulated power supply for stable lighting performance Easy installation with included power tap connector Mounting hardware MODEL 9095: Hoss 4X4 LED Light Kit

579,-

Hovedbilde Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...

Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...

High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° at 6.0V Torque: 400 oz-in at 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

-8%

Hovedbilde Traxxas 5498 Sway bar kit/front and rear)(includes ...

Traxxas 5498 Sway bar kit/front and rear)(includes ...

The Traxxas Revo sway bar kit is a must have for Revo racers everywhere. The kit was created, developed, and extensively field tested by Traxxas driver and reigning monster truck national champion Tim Roberts. The sway bar kit fits E-Revo, and it includes front and rear linkages, mounts, thick and thin sway bars, hardware, a tuning guide, and comprehensive installation instructions. Denne anbefales på det varmeste !

359,-

389,-

-8%

Hovedbilde Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)

149,-

169,-

-12%

Hovedbilde Traxxas 5034 Silicon Shock Oil Premium 50WT (600cSt) ...

Traxxas 5034 Silicon Shock Oil Premium 50WT (600cSt) ...

Silicon Shock Oil Premium 50WT (600cSt) 60ml

99,-

109,-

-9%

Hovedbilde Traxxas 3767A Aluminum Shock Caps Anodized Blue (4)

Traxxas 3767A Aluminum Shock Caps Anodized Blue (4)

These are the Blue Aluminum Shock Caps from Traxxas. FEATURES: Aluminum construction Anodized blue in color Fits all Ultra Shocks INCLUDES: Four Shock Caps REQUIRES: Installation on the shocks

179,-

189,-

-5%

Hovedbilde Traxxas 7448 Spring Shock White GTR Long 0.892 Blue ...

Traxxas 7448 Spring Shock White GTR Long 0.892 Blue ...

This is the set of Traxxas Long GTR Shock Springs with 0.892 Blue Compression Rate. FEATURES: Steel construction, white in color Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.892 Blue Rate GTR Shock Springs SPECS: Length: 1.8" (45mm) Wire Diameter: 0.043" (1.1mm)

69,-

Hovedbilde Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...

Traxxas 7449 Spring Shock White GTR XX-Long 1.004 Blue ...

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 1.004 Blue Compression Rate. FEATURES: Steel construction, white in color Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 1.004 Blue Rate GTR Shock Springs SPECS: Length: 2.2" (56mm) Wire Diameter: 0.043" (1.1mm)

59,-

69,-

-14%

Hovedbilde Traxxas 7461 Shocks Blue GTR Long without springs (2)

Traxxas 7461 Shocks Blue GTR Long without springs (2)

Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

449,-

-4%

Hovedbilde Traxxas 2075R Servo, digital high-speed, metal gear ...

Traxxas 2075R Servo, digital high-speed, metal gear ...

Servo, digital high-speed, metal gear (ball bearing), waterproof

699,-

749,-

-7%

Hovedbilde Traxxas 7462 Shocks Blue GTR XX-Long without springs ...

Traxxas 7462 Shocks Blue GTR XX-Long without springs ...

Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

459,-

499,-

-8%

Hovedbilde Proline 1017510 Trencher LP 3.8

Hovedbilde Proline 1017510 Trencher LP 3.8

Proline 1017510 Trencher LP 3.8" All Terrain Tires ...

Trencher LP 3.8" All Terrain Tires Mounted for 17mm MT Front or Rear, Mounted on Raid Black 8x32 Removable Hex 17mm Wheels This is a pair of pre-mounted Trencher LP 3.8" Monster Truck Tires. Pro-Line is stepping up the 3.8" tire game for Traxxas® MAXX® fans with the all-new Trencher LP 3.8" tires! The Trencher LP tires are designed to give your MT optimal traction on just about any surface and come in at 2.96" wide by 5.6" tall making it perfect for your MAXX® or Low Profile 1:8 Monster Truck build. Super cool horizontal H shaped treads give your MT ridiculous amounts of forward bite and with the super tall Trencher tread, you'll find that durability and longevity you have been searching for. The new Trencher LP 3.8" tires come Pre-Mounted on the next-generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The 17mm ½" offset hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for backyard bashers everywhere! Be the first to own the Trencher LP 3.8" tires at your local bash spot. Get yours today! Features: Tire Features: Aggressive Trencher Tread Design Low Profile Tire size perfect for the MAXX® Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Horizontal H Shaped Tread for Ridiculous Amounts of Side-to-Side Stability New Tire Size comes in at 2.96" wide and 5.6" tall Soft Foam Inserts Included Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel Features: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Upgrade your Hex to 17mm Aluminum (1/2" or Zero Offset) or 20mm Aluminum Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Included: Pre-Mounted Trencher LP 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2 pcs) 8x32 to 17mm Hex Adapters (2 pcs) M3 x 12mm long SHCS hardware (16 pcs) Fits: E-REVO® 2.0 SUMMIT® MAXX® Tekno MT410 ARRMA® Kraton™ Other Monster Trucks with 17mm Hexes Specs: Tire Compound Colored Dot Chart Height: 5.60" (142mm) Width: 2.96" (75mm)

749,-

799,-

-6%

Hovedbilde TRX-4M 970741 1/18 Ford Bronco Crawler Blue RTR

Hovedbilde TRX-4M 970741 1/18 Ford Bronco Crawler Blue RTR

TRX-4M 970741 1/18 Ford Bronco Crawler Blue RTR

Nyhet fra Traxxas. Traxxas TRX-4M - 1/18 Ford Bronco Crawler RTR - Blue BIG FUN AND ADVENTURE IN A SMALLER TRX-4®! Introducing the TRX-4M, a new way to experience all the fun, adventure, and scale realism of the TRX-4 in a 1/18 platform. The TRX-4M bridges the gap between the 1/24 crawler scene and 1/10 scale quality and performance. Oil-filled shocks, steel frame rails, and powerful running gear give it superior capability anywhere you want to drive, inside or outside. Features: 1/18 Versatility and Capability Oil-Filled Shocks Class-Leading Turning Radius Clipless Body Mounting Waterprotected Electronics Heavy-Duty Steel Frame Rails High-Capacity 2-Cell LiPo Battery with iD® 2-Amp USB iD® Fast Charger Heavy-Duty Steering Servo Built-in Pro Scale® Lighting Capability Licensed ABS Bodies All-In-One ECM-2.5 Control Module Three Drive Modes Powerful Titan® 180 87T Motor LED Bumper Lights Full-Featured TQ Transmitter 4-Link Front & Rear Suspension High-Performance Tires Detailed Wheels Front and Rear Spools Heavy-Duty Center Driveshafts Low-CG Battery Placement Hex-Drive Hardware Full Line of High-Quality Accessories THE RIGHT SIZE FOR FUN The larger 1/18 size allowed Traxxas engineers to pack the TRX-4M with more innovation and performance. Larger tires, higher ground clearance, bigger axles, and a powerful motor work together for huge leaps in rugged capability. The innovative suspension geometry lets TRX-4M turn around and maneuver in a fraction of the space required by smaller 1/24 rigs. Bouncy, undamped springs are replaced with silky-smooth oil-filled shocks. Beautiful scale details are clearly visible. ALL-TERRAIN VERSATILITY The TRX-4M is designed to excel everywhere theres a fun path to drive. The smooth throttle response, high-torque motor, and 30% tighter steering radius allow the TRX-4M to easily take on indoor crawling scenes and precisely thread the needle through narrow gates. Outside, the larger wheels and tires and high ground clearance let drivers test their skills over challenging rocks and terrain. Adventure awaits on the trails as the higher top speed lets TRX-4M explore at a faster pace. STEERING ANGLE The full 45° steering angle gives TRX-4M an exceptionally tight turning radius and extreme maneuverability in small spaces where every millimeter counts. OIL-FILLED GTM SHOCKS The TRX-4M rejects the status quo of tiny, bouncy, imitation shocks and instead performs with the plush, long travel suspension feel from new GTM oil-filled shocks. Easy pre-load adjustment using the supplied spacers Double o-ring seals to prevent leaks Long travel for full suspension articulation DETAILED ABS BODY WITH CLIPLESS MOUNTING Innovative Traxxas clipless body mounting is a game-changer for ease of use and scale appearance. The body removes and installs in just seconds with no clips to lose or frustrating hook and loop tabs to wrestle with. Tough, highly detailed ABS bodies feature molded-in color with a deep glossy finish that wont chip or scrape off. Molded Scale Details: Spare tire carrier Fuel canisters and jack Rugged roof rack Snorkel Side mirrors Realistic grille Door handles WATERPROTECTED ELECTRONICS Wet grass, puddles, and streams that force all the others to turn around are no problem for reliable Traxxas waterprotected electronics. HEAVY-DUTY STEEL LADDER FRAME TRX-4M performs like a full-size crawler because its built like one. A rigid steel ladder frame virtually eliminates flex to put more power to the ground. The heavy-duty driveline soaks up the motors torque with ease, sending power to all four wheels through spool-equipped axles. TRAIL-READY CHASSIS AND DRIVELINE TRX-4M rides on a sophisticated four-link suspension with heavy-duty linkage front and rear. Beefy front and rear axles have excellent articulation to climb over the toughest obstacles. INNOVATIVE NEW ELECTRONICS The all-in-one ECM-2.5 (Electronic Control Module) incorporates all the features of an XL-5 speed control, TQ receiver, and Pro Scale® Lighting Control Module into one sleek waterproof package. The ECM-2.5 features low voltage detection for 2s LiPo batteries and EZ-Set® one-button programming to select from three realistic driving modes. Smooth, precise control and outstanding throttle response allow drivers to navigate confined spaces and conquer the toughest technical obstacles with ease. Waterprotected LVD (low voltage detection) Pro Scale LED functions EZ-Set button Powerful 6-volt BEC Select from one of three custom-tuned drive modes using the EZ-Set button: Sport Mode provides full forward and reverse speed with brakes and no automatic drag brake. Trail Mode is the default mode on the TRX-4M. It is like Sport Mode but adds smooth drag braking at neutral for control on steep descents. Crawl Mode applies full brakes the instant the throttle is released and allows drivers to continue through to reverse without a second push on the trigger. Crawl mode is perfect for that smooth scale look while creeping over technical terrain. Pro Scale® Lighting Functions: Easily add accessory brake lights, reverse lights, headlights, and more by simply installing the LED light kit and plugging it into the ECM-2.5. The lighting control functions are already built in. Titan 180-87T Reverse Rotation The big Titan 180 motor delivers rugged, dependable, go-anywhere power no 1/24 scale can match. It lays down the torque on the rocks and cranks up the speed on the trails for all-day driving fun. Low-speed torque for technical obstacles Fast speed to keep pace as you walk alongside Mounts securely with a fixed gear mesh that never needs adjustment Mounting position shifts the weight bias forward for improved crawling dynamics SOFT COMPOUND TIRES TRX-4Ms larger 1/18 size puts more rubber to the ground for exceptional off-road performance. Detailed wheels and tires are sized just right to carry TRX-4M up and over real-world obstacles with stunning scale appearance. The Defenders® Canyon Trail tires are scaled versions of standard TRX-4 rubber with aggressive lugs for dynamic traction. The Ford® Broncos® BFGoodrich® Mud Terrain T/A® KM3 tires are accurate down to the smallest detail with an authentic lug pattern and raised sidewall lettering. INCLUDED 2s LIPO BATTERY AND CHARGER WITH ID® TRX-4Ms 2-cell LiPo battery provides over an hour of runtime with Traxxas iD safety and simplicity. The specially-designed iD connector plugs directly into the ECM-2.5. 2s LiPo Battery with iD: Large 750mAh capacity provides over an hour of runtime 7.4 volts of LiPo power for exceptional performance Rugged, heavy gauge wiring for free-flowing power Keyed iD connector eliminates polarity errors 2-Amp USB LiPo Fast Charger: Traxxas iD technology delivers the perfect charge with no guesswork Universal USB-A plug for convenient charging almost anywhere High-output: up to 2-amp charge rate LED progress indicator TRX-4M Specs: Length: 262mm (Bronco) / 279mm (Defender) Front Track: 124mm Rear Track: 124mm Ground Clearance: 29mm Weight (w/o battery): 468g (Bronco) / 483g (Defender) Height: 117mm (Bronco) / 135mm (Defender) Wheelbase: 155mm Approach Angle: 54° (Bronco) / 52° (Defender) Breakover Angle: 45° (Bronco) / 45° (Defender) Departure Angle: 48° (Bronco) / 41° (Defender) Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Wheels (front and rear): 1.0 x 0.49 inches (25.4 x 12.5mm) Tires (front and rear): 2.2 x 1.0 inches (57 x 25.4mm) Electronic Control Module: ECM-2.5 (Combo ESC, Receiver, Lighting Control*) Motor (electric): Titan® 180 87T Differential Type: Fully Locked; 2:1 Axle Ratio Chassis Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic Hill Hold Drive System: Shaft-Driven 4WD Steering: Axle-Mounted Servo Radio System: TQ 2.4GHz 2-Channel Transmitter Servo: #2065T Heavy-Duty Waterproof Skill Level: 1 Battery Tray: L50.5 x W31mm *Requires accessory Pro Scale LED Light Kit, sold separately Whats In The Box: TRX-4M® Ready-To-Race® model Licensed ABS hard body Titan® 180 87-turn motor ECM-2.5 Electronic Control Module TQ transmitter 7.4 volt 750mAh 2-cell LiPo battery 2-amp USB fast charger with iD® High quality maintenance tools What Youll Need: AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

2.395,-

2.495,-

-4%

Hovedbilde Traxxas 1844X Servo Saver Large

Traxxas 1844X Servo Saver Large

Denne erstatter TRX 1844 This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver on most popular servos including: Futaba, Hobbico, Tower, Airtronics, and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8" Diameter: 1" The servo saver has 6 holes for mounting the steering linkages.

55,-