Hopp til innhold
Hjem / Masse Diverse / NYHETER / Biler / Tamiya 58577 1/10 Novafox 2WD Buggy Kit No ESC
-21%

Tamiya 58577 1/10 Novafox 2WD Buggy Kit No ESC

Art.nr: 58577

1.965,-

2.495,-

- 21%
Tamiya

Tamiya
** Ikke på lager

Ikke på lager må bestilles fra leverandør

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Electric Powered, Radio Controlled, 1/10 scale
 Novafox Buggy Kit from Tamiya.
 **Improved Re-release Version of 2wd Racing Buggy from 1985.**


FEATURES

 Chassis: ABS resin, monocoque design
 Drive: Rear wheel with dogbone type driveshaft
 Motor: 540 size brushed
 Pinion Gear: 15T metal
 Electronic Speed Control: Not Included
 Body: Clear molded polycarbonate with white plastic helmeted driver
 figure
 Suspension: Four wheel independent with front stabilizer bar
 Shocks: Oil-filled, plastic body, front mono shock, two rear CVA
 shocks
 Gearbox: Sealed
 Differential: Bevel gear
 Camber Tie Rods: Fixed non-adjustable
 Caster: Adjustable, caster/toe-in refers to the angle of the front
 suspension when viewed from the side of the car in relation to the
 chassis
 Steering: Bell-crank type with servo saver and adjustable linkage
 Tires: Front grooved, 0.82" (21mm) wide, 3.3" (84mm) diameter
 Rear pin spike, 1.45" (37mm) wide, 3.4" (87mm) diameter
 Wheels: Gold colored metal plated plastic, Front 0.79" (20mm) wide
 2.2" (56mm), Rear 1.2" (32mm) wide, 2.0" (50mm) diameter


INCLUDES

Novafox Buggy Kit, with Clear Body, Driver Figure, Brushed Motor, Wheels, Tires, Decals, and Instruction Manual


REQUIREMENTS

 Radio: 2-channel with high torque steering servo
 Battery: 7.2V 6-cell stick with Standard connector
 Polycarbonate safe spray or brush on paint
 Building and track equipment

ESC


SPECIFICATIONS

Vehicle,
 Length: 16.7" (425mm)
 Width: 8.8" (225mm)
 Height: 5.2" (133mm)
 Body,
 Length: 12.25" (311mm)
 Width: 5.3" (136mm)
 Height: 3.2" (81mm)

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Reservedeler

Trykk her!

Option parts

Trykk her!

Kunder kjøpte også

Hovedbilde Yeah Racing 0039 Steel Bearing Set (30pcs) Tamiya 1/14 ... Hovedbilde Yeah Racing 0039 Steel Bearing Set (30pcs) Tamiya 1/14 ...
Yeah Racing 0039 Steel Bearing Set (30pcs) Tamiya 1/14 ...
Yeah Racing YBS-0039 Steel Bearing Set (30pcs) For Tamiya 1/14 6X4 Truck Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Tamiya 1/14 6X4 Truck Material : Steel Shielding: Rubber   Specification:   YB6011B  (5x8x2.5mm) (1 pc) YB6014B  (5x11x4mm) (27 pcs) YB6016B  (6x12x4mm) (2 pcs)   Include:   Total Bearing (30 pcs)

199,-

219,-

På lager 1
KJØP
-9%
Hovedbilde Tamiya 85054 Spray Lacquer TS-54 Light Metallic Blue 3 ...
Tamiya 85054 Spray Lacquer TS-54 Light Metallic Blue 3 ...
This is a 100ml Spray Can of Tamiya Color Paint for                     Plastics (TS-54 Light Metallic Blue). FEATURES: These cans of spray paint are extremely useful for painting large             surfaces.           Synthetic lacquer that cures in a short period of time.           Enough paint to cover 2 or 3 1/24 scale car bodies.           Not effected by acrylic or enamel paints, so detailing can be added. INCLUDES: One 100ml Spray Can of Tamiya Color Paint for Plastics (TS-54 Light             Metallic Blue). SPECS:    Volume: 100ml

109,-

På lager 6
KJØP
Hovedbilde Tamiya 81724 Acrylic Mini XF-24 Dark Gray 1/3 oz
Tamiya 81724 Acrylic Mini XF-24 Dark Gray 1/3 oz
This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Dark Grey).                      For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number XF-24 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Dark Grey) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

30,-

På lager 7
KJØP
Hovedbilde Tamiya 19804206 Ball Connector Nut 5mm 43514
Tamiya 19804206 Ball Connector Nut 5mm 43514
 Tamiya 19804206 Ball Connector Nut 5mm 43514 These are 5mm Ball Connector Nuts from Tamiya. FEATURES: High strength steel construction, black in colorReplaces worn or damaged ball connector nuts INCLUDES: Four 5mm Ball Connector Nuts REQUIRES: A 5mm hex wrench to install SPECS:    Length: 7mm (0.26") Diameter: 5mm (0.20") COMMENTS: These are use in a wide variety of R/C vehicle applications

45,-

** Ikke på lager
KJØP
Hovedbilde Tamiya PC-14 Copper Color for Polycarbonate
Tamiya PC-14 Copper Color for Polycarbonate
Ths is PC-14 a Copper Colour Polycarbonate Paint by Tamiya These paints have been formulated for use on Polycarbonate (Lexan) R/C car bodies. Each bottle contains 23ml. There are many bright colors to beautify your clear car bodies. Tamiya polycarbonate paint are watersoluble and completely safe. They can be removed from brushes and other implements using plain water if done prior to the drying, making cleanup quick and easy. (E)     (+270)

25,-

49,-

På lager 218
KJØP
-49%
Hovedbilde Tamiya X-12 Gold Leaf Colour Paint Marker
Tamiya X-12 Gold Leaf Colour Paint Marker
Easy and professional results can be yours with Tamiya's paint markers. Use them as you would a marking pen. The marker is a small, easy to use pen containing enamel paint formulated for the painting of plastics. Even the unskilled painter can now achieve beautiful results on their models. For expert modelers, it is indispensable for detailing painting and saving time. Excellent for wood, metal, glass as well as on all plastics. Contents: 8 grams (F)

49,-

99,-

På lager 49
KJØP
-51%
Hovedbilde Tamiya 74085 RC Tool Set 8pcs
Tamiya 74085 RC Tool Set 8pcs
This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. About the Item •No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. •1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. •Size 5 minus (-) screwdriver. •Size 5.5 & 7 box driver. •Comes with a convenient driver stand. Tamiya Craft Tools R/C Tool Set 74085

369,-

399,-

På lager 6
KJØP
-8%
Hovedbilde Tamiya 87089 - Airbrush Cleaner (250ml)
Tamiya 87089 - Airbrush Cleaner (250ml)
Tamiya 87089 - Airbrush Cleaner (250ml) Removes paint stains such as airbrushes with strong cleaning power A powerful type cleaning liquid suitable for maintenance of airbrushes. It is possible to cleanly wash off the dirt on the paint that has adhered to the inside of the airbrush, which has a complicated structure. It can also be used to clean metal painting tools such as toning sticks and paint dishes. 250 ml

109,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 87105 - craft cotton swabs triangle XS size ... Hovedbilde Tamiya 87105 - craft cotton swabs triangle XS size ...
Tamiya 87105 - craft cotton swabs triangle XS size ...
Tamiya 87105 - craft cotton swabs triangle XS size (50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Basic specifications  50 pieces

59,-

På lager 2
KJØP
Hovedbilde Yeah Racing DSG-0050OR Hovedbilde Yeah Racing DSG-0050OR
Yeah Racing DSG-0050OR
Yeah Racing Shock-Gear 50mm Damper Set for 1/10 RC Touring Car Orange #DSG-0050OR Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to ORild this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.           Manual:     Feature:   For: 1/10 RC Cars Material: Aluminum Color: Orange CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation   Specification:   50mm Hole to Hole   Include:   Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Super Soft) (4 pcs) Spring Yellow (Soft) (4 pcs) Spring Blue (Medium) (4 pcs) Spring White (Hard) (4 pcs) Spring Black (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc)   Yeah Racing Shock-Gear 50mm Damper Set for 1/10 RC Touring M-Chassis Car Orange Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to ORild this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car. *Photos for reference only. Feature: For: 1/10 RC Cars Material: Aluminum Color: Orange CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation 50mm Hole to Hole Include: Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Super Soft) (4 pcs) Spring Yellow (Soft) (4 pcs) Spring Blue (Medium) (4 pcs) Spring White (Hard) (4 pcs) Spring Black (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc) Manual:  

429,-

459,-

På lager 2
KJØP
-7%
Hovedbilde Yeah Racing Tamiya Egress YBS-0013 Steel Bearing Set ... Hovedbilde Yeah Racing Tamiya Egress YBS-0013 Steel Bearing Set ...
Yeah Racing Tamiya Egress YBS-0013 Steel Bearing Set ...
Steel Bearing Set (30pcs) Ver 2 For Tamiya Egress Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Features: For : Tamiya Egress Material : Steel Shielding: Rubber   Includes: Total Bearing (34 pcs) -YB6004 2x6x2.5mm(2pcs) -YB6045 3x8x3mm(2pcs) -YB6011 5x8x2.5mm(12pcs) -YB6014 5x11x4mm(10pcs) -YB6022 8x16x5mm(4pcs)

229,-

249,-

På lager 3
KJØP
-8%
Hovedbilde Tamiya 50597 DAMPER O-RING(RED) *10
Tamiya 50597 DAMPER O-RING(RED) *10
O-ringer til dempere. Passer en rekke Tamiya chassis. Se tilleggsinformasjon.   TT-02 Chassis / TT-02D Chassis / TT-02FT Chassis: benyttes sammen med C.V.A. Super Mini Shock Unit Set (50746). TT-01 TYPE-E Chassis: benyttes sammen med C.V.A. Mini Shock Unit Cylinder Set (53619). DT-02 Chassis: Ikke for XB modellene. DT-03 Chassis / DT-03T Chassis: benyttes sammen med DT-03 C.V.A. Damper Set (54567). TT-02RR Chassis: Følger med som standard i settet.

39,-

På lager 1
KJØP
Hovedbilde Dynomax B9523 Connector Futaba gold plated pair
Dynomax B9523 Connector Futaba gold plated pair
Connector Futaba gold plated pair

25,-

På lager 9
KJØP
Hovedbilde Tamiya 47489 EGRESS BLACK EDITION TAMIYA 1/10 Hovedbilde Tamiya 47489 EGRESS BLACK EDITION TAMIYA 1/10
Tamiya 47489 EGRESS BLACK EDITION TAMIYA 1/10
ay Out Style! This assembly kit creates a special Black Edition of the legendary Egress R/C buggy, which originally took the world by storm after its 1989 debut, and was then given a further update in 2013. As the name implies, its color scheme is distinctly black-based, with dampers and front uprights switched to dark titanium anodized finishes, and the six-spoke wheels molded in silver to match a body to be painted black.   Shaft-driven 4WD chassis with carbon components This shaft-driven 4WD chassis features a longitudinally-positioned motor and full ball bearings, while carbon fiber upper and lower decks ensure that the model has superb rigidity. Front and rear ball differentials offer excellent reliability and easy maintenance, working in tandem with the built-in center one-way to provide sure-footed movement, and the one-way can be locked if desired. Universal drive shafts feature the same design as those used in TRF series parts, in order to maximize transmission efficiency and minimize wear and tear. 4-wheel double wishbone suspension is supported by four oil dampers equipped with aluminum cylinders, while the front and rear of the model are fitted with stabilizers. Aluminum front uprights offer excellent reliability, and ball bearings in steering linkage arms combine with 2mm thick carbon fiber plate to offer a linear steering response. The Egress also features a brushless motor.   ★The three-piece steering tie-rod has a 2mm carbon fiber plate that helps to keep handling sharp and crisp.   ★Dark titanium anodized uprights and oil damper parts are employed along with efficient universal shafts.   ★Silver color 6-spoke wheels are paired with high-performance hybrid spike tires for a super drive.   ★Lightweight carbon fiber is employed for the 2mm-thickness decks in the rigid double-deck frame.   ★The model uses a midship motor position with one-way bearing on the gear for linear handling feel. *Motor is sold separately.   ★This image shows the rear suspension, which also uses efficient universal drive shafts.       ★Left: Take a closer look at the combination of high-capacity oil dampers and carbon fiber stay. ★Right: Mirrored stickers such as the rear wing slogan give the model that finishing touch.   Specifications ★Length: 430mm, width: 243mm, height: 157mm ★Wheelbase: 275mm ★Tire width/diameter: 32/88mm (front), 40/88mm (rear) ★2mm carbon fiber double deck frame ★Longitudinally-placed motor, shaft-driven 4WD ★Polycarbonate body and undertray ★Front & rear ball diffferentials, center one-way ★3-piece steering tie-rod ★4-wheel independent double-wishbone suspension ★High-capacity oil dampers with aluminum cylinders ★Gear ratio = 8.33:1 ★Type 540 motor and electronic speed controller (ESC) are sold separately.   Separately Required Items ★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

6.195,-

6.795,-

På lager 1
KJØP
-9%
Hovedbilde Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 19T for Tamiya car kits Description: Replace parts to the original motor gear/pinions for Tamiya car, which is made of durable 7075 aluminum Specificaiton: Material Aluminum Pitch Mod 0.6 Product Type Pinion Gear Teeth 19T Feature: Material: Aluminum Color: Titanium Include: Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 19T (1 pc) Set screw (1 pc) How to calculate Final Gear Ratio? For example, if your car has the following setting: Motor Gear: 25 Spur Gear: 84 Pulley: 19 Gear Differential: 38 Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72. Motor Turn used based on Final Gear Ratio: 3.5T: 9.5-10 4.0T: 8.9-9.5 8.5T: 6.4-7.0 The above guideline is for reference only. The recommended motor turn may vary depending on different brands. More information can be found on motors' offical websites.

59,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 51004 G Parts TT01
Tamiya 51004 G Parts TT01
  This is the Tamiya Plastic Case and Gears for the TT-01 differential.                    The part is housed in the gear case. FEATURES: Durable black colored nylon gears and diff case INCLUDES: Two small bevel gears           Differential gear case           One differentail gear(spur 61t)           Two large bevel gears REQUIRES: Assembly and installation onto vehicle

99,-

På lager 1
KJØP
Hovedbilde Tamiya 81507 Acrylic Mini X-7 Red 1/3 oz
Tamiya 81507 Acrylic Mini X-7 Red 1/3 oz
This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Red paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

På lager 3
KJØP
Hovedbilde Flysky FS GT-2E 2 channel radio set
Flysky FS GT-2E 2 channel radio set
The Flysky GT2E is a affordable, 2CH 2.4G radio system, with djustable steering dual-rate and servo reversing, making it a very simple setup for your car or boat. The automatic frequency hopping digital system provides a strong, reliable 2.4ghz signal, so rest assured you'll always be in control. Included in the package is a 3-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions. Features: Reliable, interference free 2.4GHz AFHDS signal operation. 2CH operation. Use only 4 * AA batteries for transmitter. Adjustable steering dual-rate. Simple binding procedure. Transmitter Specfications: RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS 2A Sensitivity: 1024 Low Voltage Warning: Yes DSC Port: 3.5mm Charge Port: Yes (3.5IN) Power: 4 * AA 6VDC(not included) Weight: 243g Receiver Specifications: RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS 2A Sensitivity: 1024 Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 6g Dimensions: 37 * 22 * 12mm Package information: Package size: 23.5 * 19.3 * 10.5cm / 9.3 * 7.6 * 4.1in Package weight: 496g / 1.1lb Package list: 1 * FS-GT2E transmitter 1 * FS-A3 3CH Receiver 1 * Antenna tube 1 * Bind plug

549,-

599,-

På lager 23
KJØP
-8%
Hovedbilde Kyosho OTW126B Spur Gear 51T SP Optima - 48Dp (for BLS ... Hovedbilde Kyosho OTW126B Spur Gear 51T SP Optima - 48Dp (for BLS ...
Kyosho OTW126B Spur Gear 51T SP Optima - 48Dp (for BLS ...
Kyosho OTW126B Spur Gear 51T SP Kyosho Optima - 48Dp (for BLS motor)

279,-

299,-

På lager 3
KJØP
-7%
Hovedbilde ALUMINUM CNC 8 SPOKE RIM SET FOR KYOSHO OPTIMA / ...
ALUMINUM CNC 8 SPOKE RIM SET FOR KYOSHO OPTIMA / ...
Description: Aluminum rims for your retro kyosho buggy, aluminum rims giving you more durability when landing harsh jumps!     Feature:   For: Kyosho Optima / Optima Mid / Javelin / ULTIMA Material: Aluminum Color: Silver   Specification:   Outer Diameter : 54mm Width : 34.5mm Hex : 12mm Weight : 31g / pc   Include:   Aluminum Rims (4 pcs)

699,-

749,-

På lager 1
KJØP
-7%
Hovedbilde RECEIVER 6 CHANNEL BS6 FLYSKY Hovedbilde RECEIVER 6 CHANNEL BS6 FLYSKY
RECEIVER 6 CHANNEL BS6 FLYSKY
Mottaker til blant annet Flysky FS-GT5, IT4S og Absima CR6P. Egner seg godt til radiostyrt bil og båt. Kompatibel med FlySky AFHDS 2A-radioer, blant annet FS-GT5. Ikke kompatibel med AFHDS 3-radioer som Noble NB4/NB4 Pro/NB4 Pro+. Mottakeren har innebygget gyro på styrekanalen som kan benyttes om ønskelig. Bindekabel følger med. Fra produsenten: Product Model: FS-BS6 PWM channels: 6 Wireless frequency: 2.4GHz Wireless protocol: AFHDS 2A Range: 100 ～ 300m (ground) Antenna type: single antenna (180m) Power: 4.0-6.5V RSSI: Supported Data port: PWM Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online Update: Yes Dimensions: 29 * 22 * 16.2 mm Weight: 7.6 g Certification: CE, RCM, FCC ID: N4ZBS600 Kompatibilitet FlySky FS-BS6 er en 6-kanals mottaker med AFHDS 2A-protokoll og innebygd gyrofunksjon. Mottakeren er kompatibel med FlySky-radiosendere som benytter AFHDS 2A, blant annet: FlySky FS-GT2E FlySky FS-GT5 Andre FlySky-sendere med AFHDS 2A-støtte Viktig: FS-BS6 er ikke kompatibel med AFHDS 3-sendere som FlySky Noble NB4, NB4+, NB4 Pro, NB4 Pro+ og Paladin PL18. Disse radiosenderne krever AFHDS 3-kompatible mottakere.   Informasjon på engelsk: Gyroscope Calibration The gyro has been calibrated at the factory however if it needs to be recalibrated, follow the steps below: 1. Turn off the transmitter and insert power into channel 1 (not the bind port) The receiver’s LED should start to flash slowly 2. Place the receiver on a flat horizontal surface, make sure it cannot move. 3. Insert the bind cable (plug) into the bind port. The receiver’s LED should start to flash rapidly 3 times then return to the previous flash speed if the calibration has been done successfully Note: to ensure the gyro works as expected, install the receiver horizontally at less than 10 degrees from level on your vehicles Binding Please follow the steps below to bind the BS6 receiver to your remote controller 1. Connect the bind plug to the receiver’s port B/VCC 2. Connect power to any other port on the receiver 3. Press and hold the transmitter bind key and turn on the transmitter in the same time. 4. Once binding is complete, the transmitter will exit bind mode. Remove the power and bind plug from receiver, then apply power to the port B/VCC 5. Check to make sure everything functions as expected, if not, please repeat the steps above. Note, if you are quite sure you follow the above steps completely correctly, please consider to update the firmware of your radio controller or receiver. And if you are still having problem, please check and make sure the receiver IS compatible with the brand and model of your transmitter. Size about 29*22*16mm Weight about 10 grams Channels 6 channels Voltage range: 4.0-8.4V DC Receiver sensitivity: -92dBm RF range: 2.408-2.475GHZ

399,-

549,-

På lager 1
KJØP
-27%
Hovedbilde Kyosho 30613 1/10 Scorpion 2014 2WD Buggy Kit Hovedbilde Kyosho 30613 1/10 Scorpion 2014 2WD Buggy Kit
Kyosho 30613 1/10 Scorpion 2014 2WD Buggy Kit
  KYOSHO SCORPION 2WD 1:10 KIT *LEGENDARY SERIES* This is the 1/10 scale Electric Powered, Radio Controlled  Scorpion Racing Buggy Kit from Kyosho.   FEATURES:  Chassis: 6061 aluminum, ladder frame design with countersunk  surface that allows screws to set flat  Drive: Rear wheel  Gearbox: Preassembled two piece aluminum with built-in differential  gear for easy maintenance, ball diff (not included) from the  Kyosho Ultima RB may be installed as an upgrade  Gears: Nylon and sintered alloy, 48P  Shocks: Aluminum body, oil-filled with stainless shafts  Shock Towers: 6061 aluminum  Wheels: Molded plastic with satin chrome finish  Tires: Front; ribbed with realistic internal design, 75x20mm  Rear; block pattern with inner foam, 85x41mm  Suspension Arms: 6061 aluminum  Body: Clear polycarbonate, nylon rear wing  Ball Bearings: Full set, 14 total  Radio Box: Compatible with most current battery types INCLUDES: Scorpion Racing Buggy Kit with Clear Body Shock  Tires  Wheels  Driver Figure Head Rear Wing Hex Hardware, Instruction Manual Decals REQUIREMENTS:  Radio: 2-channel  ESC: Compatible with selected motor  Motor: 540 class 30-27 turns recommended  Battery: 7.2V NiMh stick pack  Battery Charger  Paint, building and track equipment SPECIFICATIONS: Vehicle;  Length: 15.7" (398mm)  Width: 9.3" (236mm)  Height: 5.7" (145mm)  Wheelbase: 10.3" (263mm)  Front Tread: 7.8" (198mm)  Rear Tread: 7.7" (195mm) center of tires, measured side-to-side  Gear Ratio: H setting 6.9:1. L setting 8.3:1, 2 combinations included  Weight: 2.17lbs (985g) approx. without radio equipment & battery  Body;  Length: 11" (279mm)  Width: 4.5" (115mm)  Height: 2" (51mm) behind driver

4.195,-

4.595,-

På lager 1
KJØP
-9%
Hovedbilde Yeah racing STEEL BEARING SET (12PCS) FOR TAMIYA ... Hovedbilde Yeah racing STEEL BEARING SET (12PCS) FOR TAMIYA ...
Yeah racing STEEL BEARING SET (12PCS) FOR TAMIYA ...
Feature:   For : Tamiya Novafox Material : Steel Shielding: Rubber   Specification:   YB6011B 5x8x2.5mm (2pcs) YB6014B 5x11x4mm (10pcs)   Include:   Total Bearing (12 Pcs)

99,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 87207 masking tape 2mm Hovedbilde Tamiya 87207 masking tape 2mm
Tamiya 87207 masking tape 2mm
Tamiya 87207 masking tape 2mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 2 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 2 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 2mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 2mm   Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

På lager 2
KJØP
Hovedbilde JPerkins 5531025 Hobby Brush 2 (1 pcs) Hovedbilde JPerkins 5531025 Hobby Brush 2 (1 pcs)
JPerkins 5531025 Hobby Brush 2 (1 pcs)
JPerkins 5531025 Hobby Brush 2 (1 pcs)   Key Features Synthetic brown hair Pointed round brush Seamless alumium ferrule Red lacquered short handle For aquarell applications For oil and acrylic applications The perfect school brush High elasticity Exact tip Good shape retention Bacteriologically harmless

19,-

** Ikke på lager
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png