Hopp til innhold
Hjem / Batteri & lader / Plugger / Dynomax B9523 Connector Futaba gold plated pair

Dynomax B9523 Connector Futaba gold plated pair

Art.nr: B9523

25,-

DynoMAX

DynoMAX
På lager: 9

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Connector Futaba gold plated pair

Produsent

DynoMAX

DynoMAX

Leverer batteriplugger til rc.

Kunder kjøpte også

Hovedbilde
"Bulk" Tamiya 45069 RC BRUSHLESS ESC TBLE-04S
TAMIYA 45069 RC BRUSHLESS ESC 04S This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions. Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 47g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 18mm LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries) SPECIFICATIONS Electronic Speed Control (esc)  Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) Special Feature 1 LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

649,-

799,-

På lager 2
KJØP
-19%
Hovedbilde Absima 2000009 6-Channel Radio CR6S 2.4GHz Incl ... Hovedbilde Absima 2000009 6-Channel Radio CR6S 2.4GHz Incl ...
Absima 2000009 6-Channel Radio CR6S 2.4GHz Incl ...
Fra produsenten: 2.4GHz 6-Channel Radio «CR6S» including Receiver with Mixed Mode for RC Cars, Boats and Tanks FEATURES: 2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming. Receiver response time is 3ms, ensuring a fast response and better control. Smooth and highly sensitive to control inputs and stable at distances up to 200m Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks…etc. With brake and fail safe «out of control» protection function. Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels. Voltage range of transmitter: 4.8V – 12V (support 1s-3s battery), automatic identification of voltage, low voltage warning on 7.4V/4.8V Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo. Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed. Channel 4 with winch function ( I – 0 – II ) Channel 5 and 6 press for lock and press for release, servo function specially for Crawler accessories. Foam wheel for a good grip SPECIFICATION: Channel: 6CH Radio size (L/W/H): 160x100x200mm Water-proof receiver Receiver size (L/W/H): 35x20x13mm Radio operating current: 80-120mA Receiver operating current: 30mA Radio voltage range: 4.8-12V (LiPo suitable) Receiver voltage range: 3.3-10V Stable distance control up to 200m SCOPE OF DELIVERY: CR6S 6-Channel Radio R6WP 6-Channel Receiver Manual (DE/EN/FR)

795,-

895,-

På lager 1
KJØP
-11%
Hovedbilde M-Drive Glow Starter with Meter for Sub-C battery Hovedbilde M-Drive Glow Starter with Meter for Sub-C battery
M-Drive Glow Starter with Meter for Sub-C battery
M-Drive MD70200 - Glow Starter with Meter for Sub-C Battery (Battery not included) This is a glow starter with aluminium case suitable for most methanol/nitro glow engines. Specs: Battery Size: Sub-C/SC NiMH (sold separately) Length (total): 148mm Diameter: 26.5mm Weight: 61.5g (without battery) Not included - Sold separately: Sub-C NiMH battery cell Charging wire Charger

359,-

379,-

** Ikke på lager
KJØP
-5%
Hovedbilde BSD 908 1/10 NITRO TRUCK
BSD 908 1/10 NITRO TRUCK
En kvalitets Monster Truck med en 15 SH nitro motor.2.4 GHz radio Sprek og lettstartet SH 15 motor med snorstart 4WD. Nitro Monstertruck fra BSD som går bra og kjører godt i terreng. Motoren er 3cc og er enkel å stille inn, de store dekkene gjør at bilen kjører fint i terreng. Det følger med rattradio på 2,4Ghz og all elektronikk er ferdig montert i bilen, karosseriet er lakkert og det følger med manual på engelsk. Det man tregner i tillegg er 12AA batterier, fylleflaske, hjulkryss, gløder med lader og fuel. Bilen er hele 45cm lang og går virkelig bra!   1)4WD drive system. 2)18CXP powerful engine with two speed needles and slide carb. 3)Waterproof dustproof sealed bearbox. 4)Auto-shifting 2-speed transmission. 5)Sealed superduty plastic driveshaft. 6)Fast easy assembly and disassembly receiver and battery cover. 7)Supper diff.with four bevel gear. 8)Blue anodised 6061T chassis. 9)Adjustable threaded long oil-filled shock absorber. 10)integrated roll-hoop and carry handle. 11)Precise sealed ball bearing. 12)Aluminum alloy exhaust pipe. 13)Aluminum alloy shock absorbers. )   Length : 450 mm Width : 320mm Height :210mm Wheelbase :305 mm Tire Size :f100*65mm Engine:18#

3.995,-

4.395,-

** Ikke på lager
KJØP
-9%
Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

På lager 4
KONTAKT
-7%
Hovedbilde DynoMAX B9686 Charge Lead Pocket Booster/Glowstarter
DynoMAX B9686 Charge Lead Pocket Booster/Glowstarter
D-MAX™ Charging Harness for 1.2V Pocket-Booster This is a charge lead for charging a one cell NiCd/NiMH pocket booster glow starter batteries. Specs: Length: 30cm Wires: 20AWG Charger Connectors: 4mm male bullets Battery Connector: Pocket Booster / Glowplug

65,-

** Ikke på lager
KJØP
Hovedbilde Vapex NiMH Battery 1,2V 3000mAh Sub-C
Vapex NiMH Battery 1,2V 3000mAh Sub-C
  VAPEX NiMH 3000 mAh Sub-C Cell Single Sub-C sized NiMH cell with solder tabs.   Battery: 1.2V 3000 mAh NiMH Sub-C cell Size: L41.7 x D22.2 mm Weight: 56 g     Type of Battery: NiMH Length: 41,7 mm Weight: 54 g Width: 22,2 mm Capacity: 3000 mAh Number of cells: 1 Voltage: 1,2 V

49,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 3232X Super Duty Long Glow Plug
Traxxas 3232X Super Duty Long Glow Plug
This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

119,-

139,-

Ikke på lager
Ikke på lager
-14%
Hovedbilde Tamiya X-12 Gold Leaf Colour Paint Marker
Tamiya X-12 Gold Leaf Colour Paint Marker
Easy and professional results can be yours with Tamiya's paint markers. Use them as you would a marking pen. The marker is a small, easy to use pen containing enamel paint formulated for the painting of plastics. Even the unskilled painter can now achieve beautiful results on their models. For expert modelers, it is indispensable for detailing painting and saving time. Excellent for wood, metal, glass as well as on all plastics. Contents: 8 grams (F)

49,-

99,-

På lager 49
KJØP
-51%
Hovedbilde Yeah Racing Tamiya Egress YBS-0013 Steel Bearing Set ... Hovedbilde Yeah Racing Tamiya Egress YBS-0013 Steel Bearing Set ...
Yeah Racing Tamiya Egress YBS-0013 Steel Bearing Set ...
Steel Bearing Set (30pcs) Ver 2 For Tamiya Egress Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Features: For : Tamiya Egress Material : Steel Shielding: Rubber   Includes: Total Bearing (34 pcs) -YB6004 2x6x2.5mm(2pcs) -YB6045 3x8x3mm(2pcs) -YB6011 5x8x2.5mm(12pcs) -YB6014 5x11x4mm(10pcs) -YB6022 8x16x5mm(4pcs)

229,-

249,-

På lager 3
KJØP
-8%
Hovedbilde Yeah Racing DSG-0050OR Hovedbilde Yeah Racing DSG-0050OR
Yeah Racing DSG-0050OR
Yeah Racing Shock-Gear 50mm Damper Set for 1/10 RC Touring Car Orange #DSG-0050OR Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to ORild this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.           Manual:     Feature:   For: 1/10 RC Cars Material: Aluminum Color: Orange CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation   Specification:   50mm Hole to Hole   Include:   Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Super Soft) (4 pcs) Spring Yellow (Soft) (4 pcs) Spring Blue (Medium) (4 pcs) Spring White (Hard) (4 pcs) Spring Black (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc)   Yeah Racing Shock-Gear 50mm Damper Set for 1/10 RC Touring M-Chassis Car Orange Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimizing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to ORild this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car. *Photos for reference only. Feature: For: 1/10 RC Cars Material: Aluminum Color: Orange CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation 50mm Hole to Hole Include: Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Super Soft) (4 pcs) Spring Yellow (Soft) (4 pcs) Spring Blue (Medium) (4 pcs) Spring White (Hard) (4 pcs) Spring Black (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc) Manual:  

429,-

459,-

På lager 2
KJØP
-7%
Hovedbilde Tamiya 87105 - craft cotton swabs triangle XS size ... Hovedbilde Tamiya 87105 - craft cotton swabs triangle XS size ...
Tamiya 87105 - craft cotton swabs triangle XS size ...
Tamiya 87105 - craft cotton swabs triangle XS size (50) When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model. Basic specifications  50 pieces

59,-

På lager 2
KJØP
Hovedbilde Tamiya 50597 DAMPER O-RING(RED) *10
Tamiya 50597 DAMPER O-RING(RED) *10
O-ringer til dempere. Passer en rekke Tamiya chassis. Se tilleggsinformasjon.   TT-02 Chassis / TT-02D Chassis / TT-02FT Chassis: benyttes sammen med C.V.A. Super Mini Shock Unit Set (50746). TT-01 TYPE-E Chassis: benyttes sammen med C.V.A. Mini Shock Unit Cylinder Set (53619). DT-02 Chassis: Ikke for XB modellene. DT-03 Chassis / DT-03T Chassis: benyttes sammen med DT-03 C.V.A. Damper Set (54567). TT-02RR Chassis: Følger med som standard i settet.

39,-

På lager 1
KJØP
Hovedbilde Tamiya 87089 - Airbrush Cleaner (250ml)
Tamiya 87089 - Airbrush Cleaner (250ml)
Tamiya 87089 - Airbrush Cleaner (250ml) Removes paint stains such as airbrushes with strong cleaning power A powerful type cleaning liquid suitable for maintenance of airbrushes. It is possible to cleanly wash off the dirt on the paint that has adhered to the inside of the airbrush, which has a complicated structure. It can also be used to clean metal painting tools such as toning sticks and paint dishes. 250 ml

109,-

** Ikke på lager
KJØP
Hovedbilde Yeah Racing 0039 Steel Bearing Set (30pcs) Tamiya 1/14 ... Hovedbilde Yeah Racing 0039 Steel Bearing Set (30pcs) Tamiya 1/14 ...
Yeah Racing 0039 Steel Bearing Set (30pcs) Tamiya 1/14 ...
Yeah Racing YBS-0039 Steel Bearing Set (30pcs) For Tamiya 1/14 6X4 Truck Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Tamiya 1/14 6X4 Truck Material : Steel Shielding: Rubber   Specification:   YB6011B  (5x8x2.5mm) (1 pc) YB6014B  (5x11x4mm) (27 pcs) YB6016B  (6x12x4mm) (2 pcs)   Include:   Total Bearing (30 pcs)

199,-

219,-

På lager 1
KJØP
-9%
Hovedbilde Tamiya 58577 1/10 Novafox 2WD Buggy Kit No ESC Hovedbilde Tamiya 58577 1/10 Novafox 2WD Buggy Kit No ESC
Tamiya 58577 1/10 Novafox 2WD Buggy Kit No ESC
This is the Electric Powered, Radio Controlled, 1/10 scale  Novafox Buggy Kit from Tamiya.  **Improved Re-release Version of 2wd Racing Buggy from 1985.** FEATURES  Chassis: ABS resin, monocoque design  Drive: Rear wheel with dogbone type driveshaft  Motor: 540 size brushed  Pinion Gear: 15T metal  Electronic Speed Control: Not Included  Body: Clear molded polycarbonate with white plastic helmeted driver  figure  Suspension: Four wheel independent with front stabilizer bar  Shocks: Oil-filled, plastic body, front mono shock, two rear CVA  shocks  Gearbox: Sealed  Differential: Bevel gear  Camber Tie Rods: Fixed non-adjustable  Caster: Adjustable, caster/toe-in refers to the angle of the front  suspension when viewed from the side of the car in relation to the  chassis  Steering: Bell-crank type with servo saver and adjustable linkage  Tires: Front grooved, 0.82" (21mm) wide, 3.3" (84mm) diameter  Rear pin spike, 1.45" (37mm) wide, 3.4" (87mm) diameter  Wheels: Gold colored metal plated plastic, Front 0.79" (20mm) wide  2.2" (56mm), Rear 1.2" (32mm) wide, 2.0" (50mm) diameter INCLUDES Novafox Buggy Kit, with Clear Body, Driver Figure, Brushed Motor, Wheels, Tires, Decals, and Instruction Manual REQUIREMENTS  Radio: 2-channel with high torque steering servo  Battery: 7.2V 6-cell stick with Standard connector  Polycarbonate safe spray or brush on paint  Building and track equipment ESC SPECIFICATIONS Vehicle,  Length: 16.7" (425mm)  Width: 8.8" (225mm)  Height: 5.2" (133mm)  Body,  Length: 12.25" (311mm)  Width: 5.3" (136mm)  Height: 3.2" (81mm)

1.965,-

2.495,-

** Ikke på lager
KJØP
-21%
Hovedbilde Tamiya 74085 RC Tool Set 8pcs
Tamiya 74085 RC Tool Set 8pcs
This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. About the Item •No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. •1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. •Size 5 minus (-) screwdriver. •Size 5.5 & 7 box driver. •Comes with a convenient driver stand. Tamiya Craft Tools R/C Tool Set 74085

369,-

399,-

På lager 6
KJØP
-8%
Hovedbilde Tamiya 19804206 Ball Connector Nut 5mm 43514
Tamiya 19804206 Ball Connector Nut 5mm 43514
 Tamiya 19804206 Ball Connector Nut 5mm 43514 These are 5mm Ball Connector Nuts from Tamiya. FEATURES: High strength steel construction, black in colorReplaces worn or damaged ball connector nuts INCLUDES: Four 5mm Ball Connector Nuts REQUIRES: A 5mm hex wrench to install SPECS:    Length: 7mm (0.26") Diameter: 5mm (0.20") COMMENTS: These are use in a wide variety of R/C vehicle applications

45,-

** Ikke på lager
KJØP
Hovedbilde Tamiya PC-14 Copper Color for Polycarbonate
Tamiya PC-14 Copper Color for Polycarbonate
Ths is PC-14 a Copper Colour Polycarbonate Paint by Tamiya These paints have been formulated for use on Polycarbonate (Lexan) R/C car bodies. Each bottle contains 23ml. There are many bright colors to beautify your clear car bodies. Tamiya polycarbonate paint are watersoluble and completely safe. They can be removed from brushes and other implements using plain water if done prior to the drying, making cleanup quick and easy. (E)     (+270)

25,-

49,-

På lager 218
KJØP
-49%
Hovedbilde Tamiya 81724 Acrylic Mini XF-24 Dark Gray 1/3 oz
Tamiya 81724 Acrylic Mini XF-24 Dark Gray 1/3 oz
This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Dark Grey).                      For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number XF-24 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Dark Grey) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

30,-

På lager 7
KJØP
Hovedbilde Tamiya 85054 Spray Lacquer TS-54 Light Metallic Blue 3 ...
Tamiya 85054 Spray Lacquer TS-54 Light Metallic Blue 3 ...
This is a 100ml Spray Can of Tamiya Color Paint for                     Plastics (TS-54 Light Metallic Blue). FEATURES: These cans of spray paint are extremely useful for painting large             surfaces.           Synthetic lacquer that cures in a short period of time.           Enough paint to cover 2 or 3 1/24 scale car bodies.           Not effected by acrylic or enamel paints, so detailing can be added. INCLUDES: One 100ml Spray Can of Tamiya Color Paint for Plastics (TS-54 Light             Metallic Blue). SPECS:    Volume: 100ml

109,-

På lager 6
KJØP
Hovedbilde DynoMAX B9668 Charging Lead Futaba RX to XT60 20AWG ... Hovedbilde DynoMAX B9668 Charging Lead Futaba RX to XT60 20AWG ...
DynoMAX B9668 Charging Lead Futaba RX to XT60 20AWG ...
DynoMAX B9668 - Futaba RX Charge Lead for Chargers with an XT60 Output This is a charging lead for batteries with a Futaba RX connector. It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: Futaba RX Charger Connector: XT60 Wires: 20AWG Length: 500mm

65,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 87032 Masking Tape 18mm
Tamiya 87032 Masking Tape 18mm
   This is an 18 Meter Roll of 18mm Tamiya Masking Tape. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc.           Comes in a plastic, reusable dispenser.           Dispenser teeth cuts the tape to your desired length. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 18m           Width:  18mm

79,-

** Ikke på lager
KJØP
Hovedbilde Absima 13845WT/500000CPS Silicone Differential Oil ...
Absima 13845WT/500000CPS Silicone Differential Oil ...
Features: Viscosity 500000CPS/13845WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.   1 bottle /60ml  

179,-

** Ikke på lager
KJØP
Hovedbilde Tamiya 54471 Tamiya M-07, TA-06 Steel Gear ...
Tamiya 54471 Tamiya M-07, TA-06 Steel Gear ...
This differential gear unit for the TA06 chassis features metal bevel gears and metal cross shafts which are also available as Option Parts, offering greater durability. This set is specifically designed to be used for the rear gearbox. Compatible with TA06, TA06 PRO, FF-03R, M-07, M-08 and XV-01 chassis. Note: For standard FF-03 cars you must use item 54398 FF03 Gear Case for Gear Differential  This item groups together Option Parts to enable racers to effectively upgrade their TA-06 gear differential.  Rear Gear Case Set x1 Gear Differential Cup Joint Set x1 Gear Differential Gasket x1 Bevel Gears - large x2, small x4 Gear Cross Shaft

379,-

429,-

På lager 2
KJØP
-12%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png