Hopp til innhold
Hjem / Biler / El-biler / Tamiya El-biler / Buggy 4WD / Tamiya 58391 Hotshot Kit inkl. ESC
-9%

Tamiya 58391 Hotshot Kit inkl. ESC

Art.nr: 58391esc

3.195,-

3.495,-

- 9%
Tamiya

Tamiya
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 1/10 scale electric powered, radio controlled, re-release
               of the 1985 Tamiya Hotshot Off-Road Buggy Kit.

FEATURES: Chassis: Monocoque ABS Resin
          Drive: Four wheel shaft drive with dogbone type linkage
          Motor: Type 540 with aluminum heat sink and connectors
          Electronic Speed Control: Tamiya TEU-104BK w/reverse
          Shocks: Front and rear mono type horizontally mounted
          Gearboxes: Sealed
          Differentials: Planetary gear
          Transmission: Single-speed
          Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide
                        Rear  3" (77mm) diameter, 1.4" (37mm) wide
          Wheels: Nylon resin, White in color
            Front  1" (25.4mm) wide, 2" (51mm) diameter
            Rear 1.3"   (33mm) wide, 2" (51mm) diameter
          Bumpers: Front plastic
          Suspension: Four wheel double wishbone
          Camber Tie Rods: Non-adjustable
          Steering Tie Rods: Adjustable
          Steering: Bell crank type with servo saver

INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink
            Electronic Speed Control, body, tires, wheels, 13 and 15 tooth
            tooth pinion gears, spur gear, instructions and decal sheet
                                                                              _
REQUIRES: Radio: 2-Channel with 1 Servo for Steering
          Radio Batteries: (8) AA size
          Battery: 6-cell w/standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush-on
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:     15.3" (390mm)
          Width:       9.2" (235mm)
          Height:      5.9" (150mm)
          Weight: 2.8lbs (1270g) approximately
          Gear Ratio:  10.43:1 with 13T pinion gear
                       8.704:1 with 15T pinion gear
            BODY-
          Length: 8.7" (220mm)
          Width:  3.7" (95mm) at rear wheels (widest point)
                  3.1" (80mm) at front wheels (thinnest point)
          Height: 2.3" (59mm)

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Reservedeler

Trykk her!

Relaterte produkter

 

Hovedbilde Tamiya 58710 HOTSHOT II BLOCKHEAD MOTORS NO ESC Hovedbilde Tamiya 58710 HOTSHOT II BLOCKHEAD MOTORS NO ESC
Tamiya 58710 HOTSHOT II BLOCKHEAD MOTORS NO ESC
Art.nr: 58710
Copied
This is the 1/10 scale electric powered, radio controlled, re-release                of the 1985 Tamiya Hotshot Off-Road Buggy Kit. Polycarbonate body (0.7mm thickness) of the Hotshot II is pre-cut and pre-painted in brilliant blue. (Cutlines and marks to make holes are added from the original Hotshot II (Item 58062) body.) FEATURES: Chassis: Monocoque ABS Resin           Drive: Four wheel shaft drive with dogbone type linkage           Motor: Type 540 with aluminum heat sink and connectors           Electronic Speed Control: Not incl.           Shocks: Front and rear mono type horizontally mounted           Gearboxes: Sealed           Differentials: Planetary gear           Transmission: Single-speed           Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide                         Rear  3" (77mm) diameter, 1.4" (37mm) wide           Wheels: Nylon resin, White in color             Front  1" (25.4mm) wide, 2" (51mm) diameter             Rear 1.3"   (33mm) wide, 2" (51mm) diameter           Bumpers: Front plastic           Suspension: Four wheel double wishbone           Camber Tie Rods: Non-adjustable           Steering Tie Rods: Adjustable           Steering: Bell crank type with servo saver INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink             , body, tires, wheels, 13 and 15 tooth             tooth pinion gears, spur gear, instructions and decal sheet                                                                               _ REQUIRES: Radio: 2-Channel with 1 Servo for Steering and ESC           Radio Batteries: (8) AA size           Battery: 6-cell w/standard connector           Charger: AC/DC Timed or Peak for 6-cell battery           Paint: Polycarbonate safe spray or brush-on           Misc. Items: Building and track equipment SPECS:      VEHICLE-           Length:     15.3" (390mm)           Width:       9.2" (235mm)           Height:      5.9" (150mm)           Weight: 2.8lbs (1270g) approximately           Gear Ratio:  10.43:1 with 13T pinion gear                        8.704:1 with 15T pinion gear             BODY-           Length: 8.7" (220mm)           Width:  3.7" (95mm) at rear wheels (widest point)                   3.1" (80mm) at front wheels (thinnest point)           Height: 2.3" (59mm) Tamiya sine orginal farger til modellen. Trykk her for å legge alle fargene i handlekurven din. PS-12 PS-30 TS-14 TS-83 X-18 Xf-15

2.795,-

3.195,-

KJØP
-13%
Hovedbilde Tamiya 58391 Hotshot Kit no ESC
Tamiya 58391 Hotshot Kit no ESC
Art.nr: 58391
Copied
This is the 1/10 scale electric powered, radio controlled, re-release                of the 1985 Tamiya Hotshot Off-Road Buggy Kit. FEATURES: Chassis: Monocoque ABS Resin           Drive: Four wheel shaft drive with dogbone type linkage           Motor: Type 540 with aluminum heat sink and connectors           Electronic Speed Control: Not incl.           Shocks: Front and rear mono type horizontally mounted           Gearboxes: Sealed           Differentials: Planetary gear           Transmission: Single-speed           Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide                         Rear  3" (77mm) diameter, 1.4" (37mm) wide           Wheels: Nylon resin, White in color             Front  1" (25.4mm) wide, 2" (51mm) diameter             Rear 1.3"   (33mm) wide, 2" (51mm) diameter           Bumpers: Front plastic           Suspension: Four wheel double wishbone           Camber Tie Rods: Non-adjustable           Steering Tie Rods: Adjustable           Steering: Bell crank type with servo saver INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink             , body, tires, wheels, 13 and 15 tooth             tooth pinion gears, spur gear, instructions and decal sheet                                                                               _ REQUIRES: Radio: 2-Channel with 1 Servo for Steering and ESC           Radio Batteries: (8) AA size           Battery: 6-cell w/standard connector           Charger: AC/DC Timed or Peak for 6-cell battery           Paint: Polycarbonate safe spray or brush-on           Misc. Items: Building and track equipment SPECS:      VEHICLE-           Length:     15.3" (390mm)           Width:       9.2" (235mm)           Height:      5.9" (150mm)           Weight: 2.8lbs (1270g) approximately           Gear Ratio:  10.43:1 with 13T pinion gear                        8.704:1 with 15T pinion gear             BODY-           Length: 8.7" (220mm)           Width:  3.7" (95mm) at rear wheels (widest point)                   3.1" (80mm) at front wheels (thinnest point)           Height: 2.3" (59mm)

2.895,-

3.195,-

KJØP
-9%
Hovedbilde Tamiya 58737 Hotshot II 2024 Black Body No ESC Hovedbilde Tamiya 58737 Hotshot II 2024 Black Body No ESC
Tamiya 58737 Hotshot II 2024 Black Body No ESC
Art.nr: 58737
Copied
1/10 R/C Hotshot II byggesett. Kom opprinnelig i 1987, relansert i 2024 med en rekke forbedringer.  Har ferdig malt karroseri i svart. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere ESC (fartskontroller) NiMH eller LiPO batteri (round case) Batterilader This R/C model assembly kit is a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987. The sleek, smart body and rear wing are polycarbonate and pre-painted black, as well as being pre-cut. Stickers are included to apply racy orange and yellow markings. Durable 4WD Buggy Chassis The Hotshot II has a shaft-driven 4WD chassis with sealed gearboxes front and rear to keep out dirt and sand; each has a differential inside for smooth cornering, while the underside of the model is protected by the underguard. Its 4-wheel independent double wishbone suspension employs three CVA oil dampers - one at the front and two at the rear, with a front stabilizer helping to get the most out of the 4-wheel drive. White dish design wheels are paired with semi-pneumatic oval block tires for exemplary grip on tough off-road surfaces. Specifications ★Length: 390mm width: 235mm, height: 160mm ★Wheelbase: 265mm ★Tire width/diameter: 31/88mm (front); 38/88mm (rear) ★Tread: 205mm (front); 200mm (rear) ★ABS monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel independent double wishbone suspension ★CVA oil dampers ★Selectable gear ratio = 10.04:1, 8.70:1, 8.16:1, 7.68:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately. Separately Required Items ★2-channel R/C system w/ESC ★Batteries for transmitter ★Battery pack & charger ★Servo

2.695,-

3.295,-

KJØP
-18%
Hovedbilde Tamiya 58517 Super Hotshot 2012 Kit no ESC Hovedbilde Tamiya 58517 Super Hotshot 2012 Kit no ESC
Tamiya 58517 Super Hotshot 2012 Kit no ESC
Art.nr: 58517
Copied
This is the electric powered, radio controlled, 1/10 scale                  Tamiya Super Hot Shot Off-Road Buggy Kit. FEATURES: Chassis: ABS monocoque frame with plastic roll bar           Drive: Four wheel shaft drive           Motor: 25-T brushed with 13T pinion gear           Electronic Speed Control: Not incl.           Suspension: Four wheel independent double wishbone           Shocks: CVA, oil filled           Gearboxes: Enclosed           Bumper: Front, resin construction           Ball Bearings: Full set           Body: Clear polycarbonate           Tires: Pin spike 3.3" (83mm) diameter, front width 1.1" (29mm),             rear width 1.4" (36mm)           Wheels: One sets, gold plated plastic              Dimensions for both sets of wheels; 0.94" (24mm) wide front, 1.2"             (30mm) wide rear, 2.05" (52mm) diameter front and rear           Caster: Adjustable, caster/toe-in refers to the angle of the front             suspension when viewed from the side of the car in relation to the             chassis           Camber: Non-adjustable INCLUDES: Tamiya Super Hot Shot Off-Road Buggy Kit with Motor, Tires,             Wheels, Body, Rear Wing, Decals and Instructions REQUIRES: Radio: 2-channel with high torque steering servo and esc.           Battery: 6-cell 7.2V stick pack           Battery Charger: To match selected battery           Building and track equipment SPECS:      Vehicle-           Length: 15.3" (390mm)           Width:   9.2" (235mm)           Height:  5.9" (150mm)

2.995,-

3.895,-

KJØP
-23%
Hovedbilde Yeah Racing STEEL BEARING SET (22PCS) FOR TAMIYA ... Hovedbilde Yeah Racing STEEL BEARING SET (22PCS) FOR TAMIYA ...
Yeah Racing STEEL BEARING SET (22PCS) FOR TAMIYA ...
Art.nr: YBS-0033
Copied
Yeah Racing YBS-0033  Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Tamiya Hotshot / II / Super Hotshot / Boomerang Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (5pcs) YB6014B  5mm x 11mm x 4mm (17pcs)   Include:   Total Bearing (22 Pcs)

179,-

199,-

KJØP
-10%
Hovedbilde Yeah Racing G45 Universal Steel Swing Shaft V2 For ...
Yeah Racing G45 Universal Steel Swing Shaft V2 For ...
Art.nr: DF03-015V2
Copied
G45 Universal Steel Swing Shaft V2 For Tamiya DF03 TT02B Description: Change to universals from the kit's dogbones to increase smoothness in the drivetrain and get better cornering from your car!   Feature:   For: Tamiya DF03 Wild Dagger Twin Detonator Double Blaze Top Force HotShot (TT02B) Material: Steel Color: Black Need small drive cups (TT02-017) for TT02B   Include:   Shafts (2 pcs)

159,-

KJØP

Kunder kjøpte også

Hovedbilde Mstyle M-002 R/C Set - Radioset, Servo, Battery and ... Hovedbilde Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...
Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...
Genial til Tamiyabiler! Radio og mottaker. NiMh batteri og USB lader. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker, 6kg analog servo og et 7.2V 2000mAh NiMh-batteri og kompatibel lader. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr.   R/C Set - Radioset with Servo, Battery and Charger   The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast.   What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements. USB NiMh Charger C-U02: A convenient USB charger for recharging your battery quickly and efficiently. 7.2V 2000mAh NiMh Stick Pack (with Tamiya Plug): A high-performance battery that provides the power you need for extended driving sessions.   Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle!     Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required)     Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input     C-U02 USB Charger This USB Delta-Peak Charger is a simple and easy to use charger for 2-8 Cell NiMH battery packs. A USB Adaptor with an output of at least 2A is recommended. Specifications: 2-8 Cell NiMH (600-2500mAh) Charging range USB input 5V 1A, (2A Recommended) Delta-Peak Charging Tamiya Battery connector     S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

795,-

895,-

KJØP
-11%
Hovedbilde Yeah Racing STEEL BEARING SET (22PCS) FOR TAMIYA ... Hovedbilde Yeah Racing STEEL BEARING SET (22PCS) FOR TAMIYA ...
Yeah Racing STEEL BEARING SET (22PCS) FOR TAMIYA ...
Yeah Racing YBS-0033  Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Tamiya Hotshot / II / Super Hotshot / Boomerang Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (5pcs) YB6014B  5mm x 11mm x 4mm (17pcs)   Include:   Total Bearing (22 Pcs)

179,-

199,-

KJØP
-10%
Hovedbilde Hudy 105590 Wheel Balancing Putty Hovedbilde Hudy 105590 Wheel Balancing Putty
Hudy 105590 Wheel Balancing Putty
HUDY Wheel Balancing Putty This special balancing putty is used to perfectly balance the wheels and tires to reduce vibration. The putty is very sticky to ensure it will not fall off on the track during a run. A must have for properly balanced wheels. The putty can also be used to seal a receiver box, or protect the electronic connectors against water, or even to secure wires to a chassis. 85g putty is delivered in an aluminum HUDY tin box to ensure freshness.

139,-

159,-

KJØP
-13%
Hovedbilde Hudy 106210 Graphite Grease Hovedbilde Hudy 106210 Graphite Grease
Hudy 106210 Graphite Grease
  HUDY Graphite Grease is a high-performance, advanced-technology semi-fluid lubricant which incorporate both extreme pressure additives and finely dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increase the parts life.     The HUDY Graphite Grease comes in a handy small tube and is easy to apply. • Special formulation provides outstanding load-carrying and anti-wear properties • Superior protection against wear, resulting in reduced gear replacement costs and increased part life • Efficient operation, good low temperature start-up and reduced energy consumption • Very good protection against rust and corrosion • Very good adhesion reduces fling-off and consumption Applications: • Drive shaft couplings, pins, and blades • Diff gears Proper care and precautions must be used in the storage and use of HUDY Graphite Grease. Do not get near eyes or ingest, and keep out of the reach of children.

99,-

Ikke på lager
Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
Hovedbilde Yeah Racing 100mm Desert Lizard Two Stage Internal ... Hovedbilde Yeah Racing 100mm Desert Lizard Two Stage Internal ...
Yeah Racing 100mm Desert Lizard Two Stage Internal ...
Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper Pair Green For Crawler Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage! Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Normal length : 100mm Compressed length : 78mm Stretch length : 110mm Include: Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack)

339,-

439,-

KJØP
-23%
Hovedbilde Yeah Racing Spring Steel Shaft For Tamiya DF03 Wild ... Hovedbilde Yeah Racing Spring Steel Shaft For Tamiya DF03 Wild ...
Yeah Racing Spring Steel Shaft For Tamiya DF03 Wild ...
Spring Steel Shaft For Tamiya DF03 Wild Dagger Twin Detonator Double Blaze Top Force Hot Shot TT02B   Spring Steel shafts for Tamiya's DF03, Wild Dagger, Twin Detonator, Double Blaze or Top Force. Increases durability whilst not being overly heavy! (Use Yeah Racing part: TT02-017 to use these universals on your TT02B)   Features: For: Tamiya DF03 Wild Dagger Twin Detonator Double Blaze Top Force HotShot TT02B Material: Spring Steel Color: Brown   Includes: Spring Steel Shafts (2 pcs)

329,-

359,-

KJØP
-8%
Hovedbilde Yeah Racing YB0020BX Bearing Set For Tamiya Clodbuster Hovedbilde Yeah Racing YB0020BX Bearing Set For Tamiya Clodbuster
Yeah Racing YB0020BX Bearing Set For Tamiya Clodbuster
Yeah Racing RC PTFE Bearing Set with Bearing Oil For 1:10 Tamiya Clodbuster RC Monster Truck RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Telfon Bearing For Tamiya Clodbuster RC Monster Truck #YB0020BX Material: Metal   Includes: Bearing (20Pcs) -YB6011B (5x8x2.5mm) X 4Pcs -YB6016B (6x12x4mm) X 16Pcs Bearing Oil (15ml) #YA-0215   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

209,-

229,-

KJØP
-9%
Hovedbilde Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10
Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10
QuicRun 1060, 60A børsteregulator som er vann og støv beskyttet. Passer til de fleste 1:10 biler med børsteoppsett, leveres med Tamiya batterikontakt og programmeres enkelt via jumper. Kan brukes med 2-3s LiPo eller 7,2V - 10,8V NiMh batterier.   Størrelse 35,5 x 32,18 x 18mm Vekt 39g

389,-

429,-

KJØP
-9%
Hovedbilde Savox SH-50 Servo Horn Double Sided Plastic High ... Hovedbilde Savox SH-50 Servo Horn Double Sided Plastic High ...
Savox SH-50 Servo Horn Double Sided Plastic High ...
SAVÖX SH50 - Heavy Duty Double Servo Arm Plastic 25T This is a sturdy servoarm that fits all Savöx servos that have a 25T spline and also most Futaba servos (25T spline).

129,-

139,-

KJØP
-7%
Hovedbilde Savox SH82 Servo Horn Singel Alu High Torque 25T Hovedbilde Savox SH82 Servo Horn Singel Alu High Torque 25T
Savox SH82 Servo Horn Singel Alu High Torque 25T

89,-

KJØP
Hovedbilde TRX-4M 97044-1-BLK Ford F-150 High Trail RTR Black Hovedbilde TRX-4M 97044-1-BLK Ford F-150 High Trail RTR Black
TRX-4M 97044-1-BLK Ford F-150 High Trail RTR Black
Traxxas 97044-1-BLK - TRX-4M Ford® F-150® High Trail™ Edition - Black The TRX-4M Ford F-150 High Trail Edition is included in Traxxas First Delivery program which means that it's first introduced and sold in physical hobbyshops for 14 days and after that it's also available to buy online! IMPORTANT DATES: October 18 - Official Announcement November 17 - European In-Store On-Sale Date December 1 - European Online On-Sale Date High Trail Performance for TRX-4M Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The lifted High Trail pickup offers over 35% more center ground clearance than a standard TRX-4M with an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality and performance you expect from Traxxas. Long Arm Lift Kit The High Trail edition’s Factory Installed Long Arm Lift Kit and larger tires raise the center ground clearance over 35% for a dramatic lifted stance. Revised shock mounts and extended links ensure the truck maintains its carefully-tuned suspension geometry for peak performance on challenging terrain. New Larger 2.4" Tires Larger 2.4" Mickey Thompson® Baja Pro™ XS replicate the full size tire’s aggressive tread pattern and fill out the High Trail Edition’s wheel wells for an authentic “lifted truck” look. Sticky compound rubber and trail-tuned foam inserts give extra “bite” for superior traction on the trail. Extended Wheelbase The High Trail Edition’s steel frame rails extend the wheelbase out to 162mm to capture the pickup’s real-world proportions perfectly. A longer wheelbase also translates into greater climbing stability and a smoother, more stable ride over rough terrain. Detailed Clipless Body The High Trail’s clipless body holds tight on the trail but releases in just seconds with a hidden latching system to preserve its clean lines. The tough ABS body featured molded-in color with highly detailed chrome trim for complete scale authenticity. TRX-4M High Trail Specs: Length: 269mm Front Track: 127mm Rear Track: 127mm Center Ground Clearance: 40mm Weight (with battery): 468g Height: 127mm Wheelbase: 162mm Approach Angle: 62° Breakover Angle: 51.5° Departure Angle: 52° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Differential Type: Fully Locked; 2:1 Axle Ratio Wheels (front and rear): 1.0 x 0.49 inches (25.4 x 12.5mm) Tires (front and rear): 2.4 x 1.0 inches (61.9 x 25.6mm) Electronic Control Module: ECM-2.5™ (Combo ESC, Receiver, Lighting Control*) Motor (electric): Titan® 180 87T Chassis Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic “Hill Hold” Drive System: Shaft-Driven 4WD Steering: Axle-Mounted Servo Radio System: TQ™ 2.4GHz 2-Channel Transmitter Servo: #2065T Heavy Duty Waterproof Skill Level: 1 Battery Tray: L50.5 x W31mm *Requires accessory Pro Scale LED Light Kit, sold separately Motor Specs: High-torque brushed motor Size: 180 Weight: 33g Dimensions: 42mm overall length, 34mm can length & 21mm diameter Turns: 87T reverse rotation Voltage: 8.4V ECM Specs: Input Voltage: 2s LiPo Weight: 26g BEC Voltage: 6.0 VDC BEC Current: 1A Low Voltage Detection (LVD): 2-Stage Motor Overload Protection: 2-Stage Profile Selection: Sport Mode: 100% FWD, 100% Brakes, 100% REV Trail Mode: 100% FWD, 100% Brakes, 100% REV, Trail-Tuned Brake on Neutral Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral What’s In The Box: TRX-4M® High Trail™ model Licensed ABS hard body Titan® 180 87-turn motor ECM-2.5™ Electronic Control Module TQ transmitter 7.4 volt 750mAh 2-cell LiPo battery 2-amp USB fast charger with iD® High quality maintenance tools What You’ll Need: AA Alkaline Batteries: Four AA alkaline batteries for the transmitter Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.  

2.495,-

2.795,-

KJØP
-11%
Hovedbilde Vapex VPLIPOBAGB Charging Bag-B Li-Po 230x295mm Hovedbilde Vapex VPLIPOBAGB Charging Bag-B Li-Po 230x295mm
Vapex VPLIPOBAGB Charging Bag-B Li-Po 230x295mm
Charging Bag-B Li-Po 230x295mm VAPEX LiPo-Safe Bag-B 230x295mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different batteries for most cars, boats & airplanes (including all Traxxas LiPo batteries) Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 230x295mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

89,-

99,-

KJØP
-10%
Hovedbilde SkyRC D260 Ultimate Duo Charger 240VAC/12VDC 14A ... Hovedbilde SkyRC D260 Ultimate Duo Charger 240VAC/12VDC 14A ...
SkyRC D260 Ultimate Duo Charger 240VAC/12VDC 14A ...
SkyRC Ultimate Duo 260W AC/DC - Balance Charger / Discharger / Power Supply SkyRC D260 is a dual-channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at a maximum of 14A per channel, D260 is a smart choice for RC hobbyists. Multi-purpose for Most Battery Chemistries The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead-acid). Dual Output D260 allows you to charge two different battery packs simultaneously with 130W rated power per channel. The maximum charge current can be 14 amperes. Intuitive Operation The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. D260 inherits from other chargers by SkyRC; many users will find it very familiar and easy to get started. Even if D260 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. LiHV Mode Available The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35V.   Versatile with the Addition of AGM & Cold Modes AGM (Absorbent Glass Mat) battery is maintenance-free, provides excellent electrical reliability, and is lighter than the flooded lead-acid type. However, AGM batteries are far more different than normal lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode. Smart & Efficient Cooling System Temperature controlled high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device. DC Power Supply With just a few clicks, D260 can be turned into a power supply unit to power your hobby equipment. Two channels can be used individually to power two different hobby gadgets simultaneously. Universal Voltage Input With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 220V while traveling around! Even in the field, with the built-in DC input between 11V-18V, racers power the charger with their DIY battery packs. PC Software for Data Analysis and Firmware Upgrade ChargeMaster can start/stop the charging process, and view real-time graphs of current, voltage, capacity, and monitor single-cell voltage. Included: D260 Charger 2x XT60 charging leads 1x AC lead English printed manual D260 Specifications: DC Input Voltage: 11-18V AC Input Voltage: 100-240V Display Type: 128x64 LCD Display Backlight: Cool White Case Material: Metal & Plastic Controls: Five Buttons Case Size: 160x150x71mm Weight: 896g DC Power Supply Output: 130W Per Channel PC Communications: USB Port for Firmware Upgrade External Port: 2-6S Balance Socket-XH, Micro USB Port for Firmware Upgrade, Battery Socket, AC/DC Input, DC Output & 5V-2.1A USB Output Delta Peak Detection for NiMH/NiCd: 3-15mV/cell / Default: 4mV/cell Balance Current: 500mA/cell Reading Voltage Range: 0.1-26.1V Charge Current: (0.1A-14.0A) x2 Safety Timer: 1-720minutes / OFF Charge Wattage: 130Wx2 Discharge Current: (0.1A-2.0A) x2 Discharge Wattage: 10Wx2 Balance Cells: 2-6 cells Memory: 10x2 Different Charge/Discharge Profiles Charge Method: CC/CV for Lithium Types and Lead (Pb) Batteries / Delta-peak Sensitivity for NiMH/NiCd Charge Voltage: NiMH/NiCd: Delta peak detection LiPo: 4.18-4.25V/cell LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell LiHV: 4.25-4.35V/cell Battery Types/Cells: LiPo/LiIon/LiFe/LiHV: 1-6 cells NiMH/NiCd: 1-15 cells Pb: 2-20V Battery Capacity Range: NiMH/NiCd: 100-50000mAh LiPo/LiIon/LiFe/LiHV: 100-50000mAh Pb: 100-50000mAh Discharge Cut-off Voltage: NiMH/NiCd: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell Pb: 1.8-2.0V/cell Specifications: Weight: 896 g Input Voltage: 11-18VDC / 100-240VAC V Dimensions: 160x150x71 mm Charge Current: 2 x 0,1-14A Charges (Li-Fe): 1-6 Cells Charges (Li-Ion): 1-6 Cells Charges (Li-Po): 1-6 Cells Charges (NiMH): 1-15 Cells Charges (Pb): 2-20V Charging (Battery type): Li-Fe, Li-Ion, Li-Po, LiHV, Multi Charger, NiMH, Pb Discharge Current: 2 x 0,1-2,0A Output: 2 x 130W

1.799,-

1.899,-

KJØP
-5%
Hovedbilde Futaba Receiver R334SBS-E 4CH S.BUS2 T-FHSS-SR ...
Futaba Receiver R334SBS-E 4CH S.BUS2 T-FHSS-SR ...
Futaba R334SBS-E Receiver   T-FHSS SR & T-FHSS (Note that Telemetry is not functional in SR mode)  4 Channels S.BUS2 Diversity Antenna (one internal and one external) Gold plated connectors Suitable for electric cars that dont need the full lenght external antenna Specs: Length: 34 mm Width: 22.3 mm Height: 11.5 mm Weight: 7.2 g External antenna: 30 mm R334SBS-E is compatible with (as of July 2018): T7XC T7PX(E) T4PV T4PX(R) T4PL(S) T4GRS

969,-

KJØP
Hovedbilde QuicRun 880 ESC for Dual brushed motors 80A
QuicRun 880 ESC for Dual brushed motors 80A
Hobbywing QuicRun WP 880 Dual Brushed ESC Features: Fully waterproof design for all conditions Built-in switch-mode BEC with cont. current of 4A Tunable drag brake and drag brake rate for different vehicles, tracks and control feel Adjustable PWM frequency combined with advanced freewheeling technology guarantees great throttle linearity and driving feel 9 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks Proportional brake with 9 levels of initial brake force, maximum brake force and drag brake force Multiple protection: low-voltage cut-off, thermal and throttle signa loss Separate programming port to easily connect LED program card to the ESC ESC programming via Hobbywing LED programming card Specs: Current: 80A (cont) & 400A (peak) Motor Type: Brushed 540/550/775 size Application: Various 1/10 & 1/8 vehicles with dual motors LiPo/NiMH: 2-4S LiPo or 5-12S NiMH BEC: 6V @ 4A (switch mode) Connectors: Input: no / Output: 4mm female bullet Size: 45.9 x 34.7 x 26.5 mm Weight: 75g Motor Limits: 2S LiPo: >12T (540/550) 3S LiPo: >18T (540/550) 4S LiPo: >24T (540/550)

599,-

649,-

KJØP
-8%
Hovedbilde Futaba T4PM Plus Transmitter T-FHSS, R304SB-E Hovedbilde Futaba T4PM Plus Transmitter T-FHSS, R304SB-E
Futaba T4PM Plus Transmitter T-FHSS, R304SB-E
Futaba 4PM-PLUS Transmitter with R304SB-E Receiver T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system. T-FHSS MINIZ SYSTEM: By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately. FHSS MINIZ SYSTEM: By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to non-Evo Mini-z. TELEMETRY SYSTEM: The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”. 2.4 GHZ SS RADIO COMMUNICATION SYSTEM: Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems. MODEL MEMORY FOR 40 MODELS: Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. 4-AXIS JOG BUTTON: The (JOG) button can be operated in 4 directions: up, down, left, and right. ESC-LINK FUNCTION (MC-LINK): This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc. S.BUS SERVO: This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E. STEERING MIXING: Smooth cornering is possible by independent left and right steering servo setting. BRAKE MIXING FOR LARGE CARS (BRAKE): Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. GYRO MIXING (GYRO MIX): The sensitivity of Futaba car rate gyros can be adjusted from the T4PM. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS): This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC): ESCs at the front and rear are controlled independently. CPS-1 MIXING (CPS MIX): LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. ANTI-SKID BRAKING SYSTEM (TH A.B.S): This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners. THROTTLE ACCELERATION (ACCEL): Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag. THROTTLE SPEED (SPEED): Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED (SPEED): When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. RACING TIMER (TIMER): The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided. FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL): This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. TRIGGER POSITION CAN BE CHANGED: The position of the throttle trigger can be moved forward and backward. TENSION ADJUSTMENT FUNCTION: The tension of the steering wheel and throttle trigger springs can be adjusted from the outside. MECHANICAL ATL ADJUSTMENT: Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger. YOUR T4PM+ INCLUDES THE FOLLOWING COMPONENTS: T4PM-Plus Transmitter R304SB-E Receiver Dry Battery Holder Mini Screwdriver TRANSMITTER SPECS: T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELS COMMUNICATION METHOD: Bidirectional protocol MAXIMUM OPERATING RANGE: 100m (Except the MINIT system) (Optimum condition) FOR SAFETY: F/S, B-F/S, ID TRANSMITTER FREQUENCY: 2.4GHz band RF POWER OUTPUT: 100mW EIRP POWER REQUIREMENT: (Dry Cell Battery) Penlight x 3 (4.5 V) CURRENT DRAIN: 150mA or less TRANSMISSION ANTENNA: 1/2λ di-pole R304SB-E Specs: SIZE: 35.1 x 23.2 x 12.5mm WEIGHT: 7.0g RATED VOLTAGE: DC4.8-7.4V OPERATING VOLTAGE: DC4-8.4V Never use the R304SB-E receiver in GP cars/boats R304SB Specs (optional): T-FHSS SIZE: 35.1 x 23.2 x 8.5mm WEIGHT: 6.6g OPERATING VOLTAGE: DC4.8-7.4V R334SBS Specs (optional): T-FHSS SR SIZE: 33.9 x 22.3 x 11.3 mm WEIGHT: 7.5g OPERATING VOLTAGE: DC 3.7-7.4V Telemetry Sensors (as of October 2022): SBS-01V - Voltage SBS-01T - Temperature SBS-01TE - Temperature SBS-01RM - RPM SBS-01RB - RPM (Brushless) SBS-01C - Current

3.595,-

3.995,-

KJØP
-10%
Hovedbilde Absima 100CPS / 10WT Silicone Shock Oil 60ml
Absima 100CPS / 10WT Silicone Shock Oil 60ml
Features: Viscosity 100CPS / 10WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Hovedbilde JP 4401520 DELUXE WHEEL/PROP BALANCER (ALUMINIUM)
JP 4401520 DELUXE WHEEL/PROP BALANCER (ALUMINIUM)
  Key Features Ball Bearing - 4 Ground Clearance - 73mm Hub Size - up to 45mm Made from 6061 High-Grade1 Alloy and Fully Ball Raced Precision Engineered Propeller and Wheel balancer Shaft size 3mm Suited for Micro to large Props and 1/10 to 1/8 Wheels

799,-

KJØP
Hovedbilde Vapex VP2500AA Receiver Battery NiMH 6,0V 2500mAh Flat
Vapex VP2500AA Receiver Battery NiMH 6,0V 2500mAh Flat
  Vapex Instant-series of NiMH batteries with very low self-discharge level. Battery: 5-cell (6V) NiMH AA 2500 mAh Raceiver battery Connector: Futaba Length: 71.8 mm Width: 53 mm Height: 14.7 mm Weight: 148 g

249,-

KJØP
Hovedbilde Castle Creations 010015502 Mamba X 25.2 WP ...
Castle Creations 010015502 Mamba X 25.2 WP ...
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC, and the 1406 5700Kv Sensored Brushless Motor. NOT for use in 4WD short course trucks. For 2WD short course trucks on 2S LiPos geared conservatively, 1/10 scale 2WD stadium trucks and buggies on 2S for bashing and limited runs on 3S LiPos with conservative gearing, also ideal for 1/10 scale on road cars running on 2S and 3S LiPo power. FEATURES ESC; 2S - 6S input voltage range Compatible with 1/10 - 1/8 scale vehicles weighing less that 9lbs(4kg), including many extreme 1/10 scale setups and 1/8 scale racebuggies Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorlessmode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while driving Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more Audible alerts CNC aluminum case 12AWG high strand count silicone insulated battery wires Motor; High-strength neodymium sintered magnet with Kevlar wrap High-performance 0.2mm steel lamination stacked stator Castle 13 AWG silicone insulated wire leads Oversized NMB bearings Four pole configuration for maximum efficiency at high RPM CNC machined 6061-T6 aluminum front and rear endbells INCLUDES Mamba X Extreme 1/10 scale Electronic Speed Control Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector, and Waterproof Switch Replaceable Motor Sensor Harness 12AWG Battery Wires Cooling Fan 4mm Gold Plated Bullet Motor Connectors 1406 5700Kv Sensored Brushless Motor Sensor Wire SPECIFICATIONS ESC; Input Voltage Range: 2S - 6S LiPo BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Programmable: Fully programmable with Castle Link USB Adapter, and downloadable Casle Link Windows software Telemetry Link Capable: Yes Brake: Proportional Reverse: Yes, may be disabled for racing Cooling Fan: 1.2" (30mm) removable Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm) Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to run Motor; Input Voltage Range: 2-3S LiPo, Kv: 5700 Max. RPM: 100,000 Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR Length: 1.9" (49.5mm) Diameter: 1.4" (36mm) Weight with Wires: 7.1oz (202g) Shaft Diameter: 1/8" (3.17mm) Shaft Length: 0.59" (15mm) Mounting Hole Specifications: M3 @ 25mm Connectors: 4mm Male Castle Bullet COMMENTS Waterproof under normal operation. Not intended for operation when completely submerged in water.

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Hudy 106222 Bearing Grease (Premium)
Hudy 106222 Bearing Grease (Premium)
  HUDY Bearing Grease Premium is a supreme-performance lubricant for extreme overload conditions in highly-loaded bearings. The grease combines the unique features of synthetic-base fluids with those of a high-quality lithium complex thickener. The wax-free nature of synthetic fluids and low coefficient of friction provide very low running torque. This grease reduces operating temperatures in the load zone of spherical roller- and ball-bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The grease has a high level of chemical stability and is formulated with special additive combinations to provide excellent protection against wear, rust and corrosion at high and low temperatures.   Features: • Excellent protection at high temperatures and low torque • Outstanding high-temperature and low-temperature performance • Reduced downtime and maintenance costs because of reduced wear, rust and corrosion • Excellent protection against wear, rust, and corrosion • Extended service life with longer intervals between re-lubrication and improved bearing life • Excellent thermal stability and oxidation resistance • Low traction coefficient • Retains excellent grease performance in hostile aqueous environments • Outstanding structural stability in the presence of water • Helps resists viscosity increase at high temperatures to maximize re-lubrication intervals and bearing life.         (11)

99,-

Ikke på lager
Hovedbilde Tamiya 87044 Surface Primer L White
Tamiya 87044 Surface Primer L White
This is a 180ml Can of White Fine Surface Primer from Tamiya. FEATURES: Spray type primer specially developed for model finishing.           Use on metal and plastic.           The fine particle of the primer ensures a smooth finish after             application.           White color is ideal as a base coat for bright colors. INCLUDES: One 180ml Can of White Fine Surface Primer. SPECS:    180ml

139,-

KJØP
Hovedbilde Tamiya 85050 Spray Lacquer TS-50 Blue Mica 3 oz
Tamiya 85050 Spray Lacquer TS-50 Blue Mica 3 oz
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Mica Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 58518 1/10 Super Clod Buster 4WD Kit inkl ESC Hovedbilde Tamiya 58518 1/10 Super Clod Buster 4WD Kit inkl ESC
Tamiya 58518 1/10 Super Clod Buster 4WD Kit inkl ESC
Tamiya RC SUPER CLOD BUSTER Description: Tamiya is proud to present the Super Clod Buster as an assembly kit. This monster truck features an American pick-up truck like body that gives it a realistic appearance. Front grill, air intake and roll bar have been recreated with metal plated parts. The Super Clod Buster features a twin-motor dual gearbox 4WD drive train, a durable link-arm, 8 coil springs and massive 165mm dia. tires for powerful and efficient running to overrun any obstacle. Want to enjoy monster truck running? The Super Clod Buster is made for you!   Two motors and 4WS system The Super Clod Buster is equipped with two motors and tightly sealed gearboxes that have been molded as one piece with axle housing. Minimum power loss and smooth cornering are obtained thanks to a gear train transmission and differentials. The included Dual Motor ESC provides ample power to get your truck over obstacles. Furthermore, this monster truck is also equipped with a 4WS system for 4-wheel drive steering. This feature makes tight cornering with such a big machine easy! Total length: 480mm Total width: 380mm Total height: 340mm. Chassis Material: ABS Chassis Shape: Bathtub Type Suspension: Front and Rear Trailing Arm Transmission Type: Twin-motor dual gearbox 4WD drive train Includes two Type 540 motors. Tire Diameter F/R: Both 165mm ESC speed controller included for twin motor Specifications: Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Incl Electronic Speed Control (esc) TEU 103BK Twin Motor Type Led Light Buckets no Motor 540-brushed type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya TS paint. Scale 1/10 Shock Damper Friction damper Special Feature 2 Special features: optional 4-wheel steering Special Feature 3 3-channel radio recommended for 4-wheel steering operation Terrain Use Multi-Purpose Paint Required: These paints are selected based on the look in the pictures but individuals can choose different colors. TS-38 GUN METAL TS-50 MICA BLUE ACRYLIC MINI X-11CHROME SILVER

4.695,-

4.895,-

KJØP
-4%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png