Hopp til innhold
-9%

Tamiya 58391 Hotshot Kit no ESC

Art.nr: 58391

2.895,-

3.195,-

- 9%
Tamiya

Tamiya

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 1/10 scale electric powered, radio controlled, re-release
               of the 1985 Tamiya Hotshot Off-Road Buggy Kit.

FEATURES: Chassis: Monocoque ABS Resin
          Drive: Four wheel shaft drive with dogbone type linkage
          Motor: Type 540 with aluminum heat sink and connectors
          Electronic Speed Control: Not incl.
          Shocks: Front and rear mono type horizontally mounted
          Gearboxes: Sealed
          Differentials: Planetary gear
          Transmission: Single-speed
          Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide
                        Rear  3" (77mm) diameter, 1.4" (37mm) wide
          Wheels: Nylon resin, White in color
            Front  1" (25.4mm) wide, 2" (51mm) diameter
            Rear 1.3"   (33mm) wide, 2" (51mm) diameter
          Bumpers: Front plastic
          Suspension: Four wheel double wishbone
          Camber Tie Rods: Non-adjustable
          Steering Tie Rods: Adjustable
          Steering: Bell crank type with servo saver

INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink
            , body, tires, wheels, 13 and 15 tooth
            tooth pinion gears, spur gear, instructions and decal sheet
                                                                              _
REQUIRES: Radio: 2-Channel with 1 Servo for Steering and ESC
          Radio Batteries: (8) AA size
          Battery: 6-cell w/standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Polycarbonate safe spray or brush-on
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:     15.3" (390mm)
          Width:       9.2" (235mm)
          Height:      5.9" (150mm)
          Weight: 2.8lbs (1270g) approximately
          Gear Ratio:  10.43:1 with 13T pinion gear
                       8.704:1 with 15T pinion gear
            BODY-
          Length: 8.7" (220mm)
          Width:  3.7" (95mm) at rear wheels (widest point)
                  3.1" (80mm) at front wheels (thinnest point)
          Height: 2.3" (59mm)

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Reservedeler

Relaterte produkter

 

Art.nr: 58710
Copied
This is the 1/10 scale electric powered, radio controlled, re-release                of the 1985 Tamiya Hotshot Off-Road Buggy Kit. Polycarbonate body (0.7mm thickness) of the Hotshot II is pre-cut and pre-painted in brilliant blue. (Cutlines and marks to make holes are added from the original Hotshot II (Item 58062) body.) FEATURES: Chassis: Monocoque ABS Resin           Drive: Four wheel shaft drive with dogbone type linkage           Motor: Type 540 with aluminum heat sink and connectors           Electronic Speed Control: Not incl.           Shocks: Front and rear mono type horizontally mounted           Gearboxes: Sealed           Differentials: Planetary gear           Transmission: Single-speed           Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide                         Rear  3" (77mm) diameter, 1.4" (37mm) wide           Wheels: Nylon resin, White in color             Front  1" (25.4mm) wide, 2" (51mm) diameter             Rear 1.3"   (33mm) wide, 2" (51mm) diameter           Bumpers: Front plastic           Suspension: Four wheel double wishbone           Camber Tie Rods: Non-adjustable           Steering Tie Rods: Adjustable           Steering: Bell crank type with servo saver INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink             , body, tires, wheels, 13 and 15 tooth             tooth pinion gears, spur gear, instructions and decal sheet                                                                               _ REQUIRES: Radio: 2-Channel with 1 Servo for Steering and ESC           Radio Batteries: (8) AA size           Battery: 6-cell w/standard connector           Charger: AC/DC Timed or Peak for 6-cell battery           Paint: Polycarbonate safe spray or brush-on           Misc. Items: Building and track equipment SPECS:      VEHICLE-           Length:     15.3" (390mm)           Width:       9.2" (235mm)           Height:      5.9" (150mm)           Weight: 2.8lbs (1270g) approximately           Gear Ratio:  10.43:1 with 13T pinion gear                        8.704:1 with 15T pinion gear             BODY-           Length: 8.7" (220mm)           Width:  3.7" (95mm) at rear wheels (widest point)                   3.1" (80mm) at front wheels (thinnest point)           Height: 2.3" (59mm) Tamiya sine orginal farger til modellen. Trykk her for å legge alle fargene i handlekurven din. PS-12 PS-30 TS-14 TS-83 X-18 Xf-15

2.795,-

3.195,-

KJØP
-13%
Art.nr: 58391esc
Copied
This is the 1/10 scale electric powered, radio controlled, re-release                of the 1985 Tamiya Hotshot Off-Road Buggy Kit. FEATURES: Chassis: Monocoque ABS Resin           Drive: Four wheel shaft drive with dogbone type linkage           Motor: Type 540 with aluminum heat sink and connectors           Electronic Speed Control: Tamiya TEU-104BK w/reverse           Shocks: Front and rear mono type horizontally mounted           Gearboxes: Sealed           Differentials: Planetary gear           Transmission: Single-speed           Tires: Spike, Front 3" (77mm) diameter, 1.1" (28.5mm) wide                         Rear  3" (77mm) diameter, 1.4" (37mm) wide           Wheels: Nylon resin, White in color             Front  1" (25.4mm) wide, 2" (51mm) diameter             Rear 1.3"   (33mm) wide, 2" (51mm) diameter           Bumpers: Front plastic           Suspension: Four wheel double wishbone           Camber Tie Rods: Non-adjustable           Steering Tie Rods: Adjustable           Steering: Bell crank type with servo saver INCLUDES: Tamiya Hotshot buggy with two shocks, 540 motor, heat sink             Electronic Speed Control, body, tires, wheels, 13 and 15 tooth             tooth pinion gears, spur gear, instructions and decal sheet                                                                               _ REQUIRES: Radio: 2-Channel with 1 Servo for Steering           Radio Batteries: (8) AA size           Battery: 6-cell w/standard connector           Charger: AC/DC Timed or Peak for 6-cell battery           Paint: Polycarbonate safe spray or brush-on           Misc. Items: Building and track equipment SPECS:      VEHICLE-           Length:     15.3" (390mm)           Width:       9.2" (235mm)           Height:      5.9" (150mm)           Weight: 2.8lbs (1270g) approximately           Gear Ratio:  10.43:1 with 13T pinion gear                        8.704:1 with 15T pinion gear             BODY-           Length: 8.7" (220mm)           Width:  3.7" (95mm) at rear wheels (widest point)                   3.1" (80mm) at front wheels (thinnest point)           Height: 2.3" (59mm)

3.195,-

3.495,-

KJØP
-9%
Art.nr: 58737
Copied
1/10 R/C Hotshot II byggesett. Kom opprinnelig i 1987, relansert i 2024 med en rekke forbedringer.  Har ferdig malt karroseri i svart. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere ESC (fartskontroller) NiMH eller LiPO batteri (round case) Batterilader This R/C model assembly kit is a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987. The sleek, smart body and rear wing are polycarbonate and pre-painted black, as well as being pre-cut. Stickers are included to apply racy orange and yellow markings. Durable 4WD Buggy Chassis The Hotshot II has a shaft-driven 4WD chassis with sealed gearboxes front and rear to keep out dirt and sand; each has a differential inside for smooth cornering, while the underside of the model is protected by the underguard. Its 4-wheel independent double wishbone suspension employs three CVA oil dampers - one at the front and two at the rear, with a front stabilizer helping to get the most out of the 4-wheel drive. White dish design wheels are paired with semi-pneumatic oval block tires for exemplary grip on tough off-road surfaces. Specifications ★Length: 390mm width: 235mm, height: 160mm ★Wheelbase: 265mm ★Tire width/diameter: 31/88mm (front); 38/88mm (rear) ★Tread: 205mm (front); 200mm (rear) ★ABS monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel independent double wishbone suspension ★CVA oil dampers ★Selectable gear ratio = 10.04:1, 8.70:1, 8.16:1, 7.68:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately. Separately Required Items ★2-channel R/C system w/ESC ★Batteries for transmitter ★Battery pack & charger ★Servo

2.695,-

3.295,-

KJØP
-18%
Art.nr: 58517
Copied
This is the electric powered, radio controlled, 1/10 scale                  Tamiya Super Hot Shot Off-Road Buggy Kit. FEATURES: Chassis: ABS monocoque frame with plastic roll bar           Drive: Four wheel shaft drive           Motor: 25-T brushed with 13T pinion gear           Electronic Speed Control: Not incl.           Suspension: Four wheel independent double wishbone           Shocks: CVA, oil filled           Gearboxes: Enclosed           Bumper: Front, resin construction           Ball Bearings: Full set           Body: Clear polycarbonate           Tires: Pin spike 3.3" (83mm) diameter, front width 1.1" (29mm),             rear width 1.4" (36mm)           Wheels: One sets, gold plated plastic              Dimensions for both sets of wheels; 0.94" (24mm) wide front, 1.2"             (30mm) wide rear, 2.05" (52mm) diameter front and rear           Caster: Adjustable, caster/toe-in refers to the angle of the front             suspension when viewed from the side of the car in relation to the             chassis           Camber: Non-adjustable INCLUDES: Tamiya Super Hot Shot Off-Road Buggy Kit with Motor, Tires,             Wheels, Body, Rear Wing, Decals and Instructions REQUIRES: Radio: 2-channel with high torque steering servo and esc.           Battery: 6-cell 7.2V stick pack           Battery Charger: To match selected battery           Building and track equipment SPECS:      Vehicle-           Length: 15.3" (390mm)           Width:   9.2" (235mm)           Height:  5.9" (150mm)

2.995,-

3.895,-

KJØP
-23%
Art.nr: YBS-0033
Copied
Yeah Racing YBS-0033  Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Tamiya Hotshot / II / Super Hotshot / Boomerang Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (5pcs) YB6014B  5mm x 11mm x 4mm (17pcs)   Include:   Total Bearing (22 Pcs)

179,-

199,-

KJØP
-10%
Art.nr: DF03-015V2
Copied
G45 Universal Steel Swing Shaft V2 For Tamiya DF03 TT02B Description: Change to universals from the kit's dogbones to increase smoothness in the drivetrain and get better cornering from your car!   Feature:   For: Tamiya DF03 Wild Dagger Twin Detonator Double Blaze Top Force HotShot (TT02B) Material: Steel Color: Black Need small drive cups (TT02-017) for TT02B   Include:   Shafts (2 pcs)

159,-

KJØP

Kunder kjøpte også

This is the 1/10 scale Grasshopper Offroad Racer kit from Tamiya.                                                                               _ FEATURES: Chassis:           ABS resin, tub-type chassis           Esc:                Included           Drive:             2WD, rear drive           Motor:             380 size electric           Full metal bushings           Shocks:            Friction shocks (not oil filled)           Gearbox:           Closed           Differentials:     Gear type diff           Tires:             Ribbed front                              Sandpaddle Rear           Wheels:            1.6" diameter, white five spoke wheels           Speed Control:     Not included           Bumpers:           Reinforced resin front bumper           Suspension:        Front swing axle type                              Rear straight axle with differential           Camber Tie Rods:   Fixed, camber refers to the angle of the tops of                              the tires from vertical when viewed from front or                              behind vehicle           Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of                              the front suspension when viewed from the side of                              the car in relation to the chassis           Steering:          Direct-to-servo with servo saver           Servo Saver:       included (if this applies) INCLUDES: One Grasshopper rolling chassis with friction shocks, 380 motor,             rigid White body, five spoke wheels, front ribbed tires, rear             sandpaddle tires, 50 tooth spur gear, and instructions                                                                               _ REQUIRES: Radio:           2-Channel with 1 Servo           Radio Batteries: (8) AA size           Battery:         6 cell flat w/ standard connector           Charger:         AC/DC Timed or Peak for 6-cell battery           Paint:           Required for painting driver and accessories           Misc. Items:     Building and track equipment Inkl ESC. SPECS:      VEHICLE-           Length:     15.3"    (389mm)           Width:       8.8"    (223mm)           Height:      5.3"    (135mm)           Weight:      1.8 lbs (830g)           Tires:       .87" x 2.9" (22mm x 74mm) width x diameter                        1.6" x 3.2" (41mm x 81mm) width x diameter

1.449,-

1.699,-

KJØP
-15%
Spare tire mount/ mounting bracket/ screw pins (2)

69,-

KJØP
Tires and wheels, assembled (Method 105 1.9” black chrome beadlock wheels, Canyon Trail 4.6x1.9” tires, foam inserts) (1 left, 1 right)

949,-

999,-

KJØP
-5%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
     This is the Hitec standard size Ball Bearing Servo with the            Universal Futaba J, Hitec S, JR and Airtronics Z Connector.   Connector is compatible with all modern receivers and wiring accessories. FEATURES: NEW Heavy-duty resin gear train           Ball bearing           3-pole ferrite motor INCLUDES: One Deluxe Standard servo with nylon bushing           One white small X-shaped servo horn.           One white adjustable servo horn.           One white offset straight servo horn.           One white wheel servo horn           Four brass eyelets           Four black rubber vibration isolators.           Four 2 x 14mm mounting screws REQUIRES: Radio system SPECS:    Speed: 0.19 sec/60° @ 4.8V           Speed: 0.15 sec/60° @ 6.0V           Torque: 42.00 oz-in @ 4.8V           Torque: 51.00 oz-in @ 6.0V           Length:  1.6" (41mm)           Width:   0.8" (20mm)           Height:  1.4" (37mm)           Weight:  1.7oz (48g)

289,-

319,-

KJØP
-9%
Silicon Shock Oil Premium 50WT (600cSt) 60ml

99,-

109,-

KJØP
-9%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png