Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / HPI Racing Bullet series / HPI Racing 101299 Front Inner Suspension Shaft 3x57mm (2)

HPI Racing 101299 Front Inner Suspension Shaft 3x57mm (2)

Art.nr: 101299

45,-

Hpi Racing

Hpi Racing
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 3X57mm Front Inner Suspension Shaft For the HPI Racing WR8 and Bullet Series

FEATURES

Metal construction

INCLUDES

Two suspension shafts

Three E-clips

COMMENTS

This shaft can be installed on

1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

1/10 Bullet MT Flux 2.4GHz RTR

1/10 Bullet ST Flux 2.4GHz RTR

1/10 Bullet MT 3.0 Nitro 2.4GHz RTR

1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

Produsent

Hpi Racing

Hpi Racing

Relaterte produkter

 

Hovedbilde HPI 101253 Racing Ball 5.8X14Mm (5Pcs)
HPI 101253 Racing Ball 5.8X14Mm (5Pcs)
Art.nr: 101253
Copied
HPI 101253 Racing Ball 5.8X14Mm (5Pcs)   WR8, BULLET SERIES Genuine HPI quality spare part for easy maintenance and repairs   This Part Fits the following kits / parts: Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux WR8 3.0 Ford Fiesta Abu Dhabi Bullet ST 3.0 w/ 2.4GHz Bullet MT 3.0 w/ 2.4GHz RTR Bullet ST Flux W/ 2.4GHz Bullet MT Flux w/ 2.4GHz WR8 Flux Rally Ken Block WR8 with Ford Fiesta H.F Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Ken Block 2013 GRC WR8 Flux KEN BLOCK 2013 GRC WR8 3.0 WR8 FLUX KEN BLOCK 2014 FORD FIESTA WR8 3.0 KEN BLOCK FORD FIESTA ST WR8 Flux Ken Block 2015 Ford Fiesta WR8 3.0 Ken Block 2015 Ford Fiesta WR8 FLUX KEN BLOCK GYMKHANA FORD WR8 3.0 KEN BLOCK GYMKHANA FORD WR8 3.0 2001 WRC Subaru Impreza WR8 FLUX 2001 WRC Subaru Impreza

69,-

KJØP

Kunder kjøpte også

Hovedbilde HPI 101213 Racing Suspension Arm Set
HPI 101213 Racing Suspension Arm Set
This is the Suspension Arm Set For the HPI Racing Bullet Series FEATURES: Black color INCLUDES: Four suspension arms Two spacers COMMENTS: The HPI Racing Bullet Series cars carried include Bullet ST Flux Bullet MT Flux  Bullet MT 3.0 Nitro       (11)

189,-

KJØP
Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter
Flysky FS-GT3B 2.4GHZ Transmitter
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Hovedbilde Traxxas 5472 Wheelie Bar Assembled Revo
Traxxas 5472 Wheelie Bar Assembled Revo
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Hovedbilde Traxxas 2577 Button Head Screw 3x10mm Revo (6)
Traxxas 2577 Button Head Screw 3x10mm Revo (6)
This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction           Black in Color           Button Head Type           Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

KJØP
Hovedbilde Traxxas 3955 Spur Gear 1.0P 40T Revo
Traxxas 3955 Spur Gear 1.0P 40T Revo
This is a replacement 40T Spur Gear for the Traxxas Revo.                    This gear meshes with the clutch bell. FEATURES: Black plastic construction INCLUDES: One 1.0 metric pitch 40T spur gear REQUIRES: Nothing.  This is a direct replacement part.

39,-

KJØP
Hovedbilde DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm ...
DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm ...
DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm bananplugg Ladekabel med XT90 plugg til 4mm bananplugger. Benyttes for lading av batterier med XT90-plugg, og kobles rett i ladere med 4mm bananplugger.

99,-

119,-

KJØP
-17%
Hovedbilde Castle Creations 010-0065-14 Pinion Mod-1 Set
Castle Creations 010-0065-14 Pinion Mod-1 Set
NB! Dette settet inneholder 7 stk pinions. Dette gir en pris på 164,- pr stk.   Complete pinion set for your 1/8 Buggy, or Truggy, with Mod-1 gears and a motor with 5 mm shaft. MOD-1 Pinion Gear Set   Material: Steel   Fits electric motors with 5 mm shafts   Includes: 11T, 13T, 15T, 17T, 19T, 21T & 23T

1.149,-

1.199,-

KJØP
-4%
Hovedbilde Traxxas 2594 Screws 4x15mm Button-Head Machine (Hex ...
Traxxas 2594 Screws 4x15mm Button-Head Machine (Hex ...
These are the 4x15mm Button Head Machine Screwsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction INCLUDES Six 4x15mm Button Head Machine Screws REQUIREMENTS 2.5mm Hex Wrench SPECIFICATIONS Diameter: 4mm Length: 15mm

39,-

KJØP
Hovedbilde Absima 100CPS / 10WT Silicone Shock Oil 60ml
Absima 100CPS / 10WT Silicone Shock Oil 60ml
Features: Viscosity 100CPS / 10WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Hovedbilde Radient 010041 XT90 PAIRS WITH CAP END (5PCS)
Radient 010041 XT90 PAIRS WITH CAP END (5PCS)
XT90 PAIRS WITH CAP END (5PCS)

289,-

KJØP
Hovedbilde Power HD 1812MG Waterproof 18kg Hovedbilde Power HD 1812MG Waterproof 18kg
Power HD 1812MG Waterproof 18kg
Power HD 1812MG Waterproof 18kg En god og solid vanntett servo med metallgir for de fleste formål. Med en styrke på 18kg er den godt egnet for alt fra bil til fly og øvrige hobbyprosjekter. Benytter servohorn med 25T (Futaba) splines.   Vekt 56 gram uten ledning Mål 40,7 x 20,5 x 39,5 mm Egnet for 4,5 - 6,0 volt Holdekraft 18kg/cm Hastighet 0.12sec/60° (uten belastning) Temperatur    -20 til 50 grader Presisjon 4us

299,-

329,-

KJØP
-9%
Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ... Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Sensorbasert børsteløs motor på 2250KV. Passer til bl.a. 1/8 konkurranse bruk ved bruk av 3-6s LiPo. Anbefales i bruk sammen med Hobbywin MAX8 ESC.   Sensormodus & høy effekt EZRUN-serien av motorer er kjent for å være dynamiske og dominerende. De er bygget annerledes for å møte behovene til ulike krav på markedet. Den har en sterk utgangseffekt med en utmerket linearitet ved lav hastighet og opererer i fullsensormodus.   En perfekt kombo med EZRun MAX8 G2 ESC Motoren oppnår perfekt kompatibilitet når den brukes sammen med EzRun MAX8 G2 ESC. Den gir ultra-stort dreiemoment. presis håndteringsytelse, og gir en jevn og komfortabel kontrollopplevelse til brukerne.   Materialer av høy kvalitet og utmerket produktdesign Materialene (motorhus, lagre, ultratynne silisiumstålplater, høytemperaturbestandig kobbertråd, eksplosjonssikker rotor, høytoleranselegeringsaksel) er nøye utvalgt og godkjent av våre interne ingeniører. Hobbywing er seriøs når det gjelder å gi brukere en ekstraordinær ytelse over lang tid.   Gjelder for alle værforhold Det vanntette IP-67-systemet garanterer utmerket vanntetting og støvtettingsbeskyttelse. Hele kraftsystemet er i stand til å kjøre på en rekke overflater, inkludert gjørmete, sandete, isete, snødekte og vann uten å skade kraftenheten.   Nytt sensorert kabelinterface Utstyrt med en ny type sensorert kabelgrensesnitt. Det er sterkt anbefalt å bruke motorene fra Hobbywing da det vanntette beskyttelsesnivået er på høyeste nivå (IP67).   Praktisk design for demontering og vedlikehold Motoren har en modulær avtakbar strukturdesign for enkel demontering og daglig vedlikehold. Dette bidrar til å forlenge levetiden til motoren og opprettholde effektiviteten til motoren enkelt.  

1.395,-

1.795,-

KJØP
-22%
Hovedbilde Gens Ace Bashing G-Tech 3s 5000mAh - 60C - XT90
Gens Ace Bashing G-Tech 3s 5000mAh - 60C - XT90
Produktinformasjon 3s 5000mAh - 60C - Gens Ace Bashing G-Tech XT90 er et godt valg til radiostyrte biler som krever 3s LiPo. Batteriet har dimensjonene 135x43x26mm og veier 343g. XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere.   G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov. G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 343g Størrelse: 135x43x26mm Strømplugg: XT90 Balanseringsplugg G-Tech   Gens ace lipo 5000mah 3S1P 60C battery Suited to the following models:1/8, 1/10 RC car model, such as 1/8 SLEDGE. Fast charging by 5C is available.

629,-

679,-

KJØP
-7%
Hovedbilde Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored ... Hovedbilde Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored ...
Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored ...
Hobbywing HW30103205 - EzRun MAX8 G2S ESC The esc has an innovative waterproof sensor interface,enhancing the overall waterproof and dustproof performance. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation. Built-in ultra-powerful switch mode BEC and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos. Supports turbo timing setting, the timing response is remarkable when used with the matching motor. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. The built-in (integrated in the switch) Bluetooth function allows for setting and upgrading the esc by directly connecting to the mobile app, without any additional devices, making it simpler and more convenient Data logging function to view various running data on the HW LINK app Supports the firmware upgrade of the ESC, you can enjoy the latest functions Extreme output, easy to control The ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably. Optimized hardware, increases in stability and reliability Based on the MAX8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further improved. Optimized hardware design Intelligent freewheeling technology Built-in Bluetooth, directly connected to the mobile APP The ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter settings, data reading, firmware upgrades other operations. Note: The data includes throttle amount, voltage, current, temperature, speed, etc. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Intelligent fan start and stop function The ESC fan does not run when the ESC temperature is low.The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. Efficient cooling system A frameless fan with patented technology is used. The large flow of air from the side of the fan effectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the optimal operating temperature. High level of protection Excellent waterproof and dust-proof performance (IP67) Cope with harsh environments, various climate conditions all-weather operation capabilities 1/8th power system turbo timing technology Turbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing. The maximum speed can be increased by approximately 25% (EzRun 4268/4278SD G2 motors) Capacitor overheating protection The Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage. Buil-in Super BEC A maximum output current of up to 15A The output voltage can be switched in three levels of 6V, 7.4V & 8.4V The built in super BEC allows racers to use high power, high voltage servos. Waterproof Sensor Harness The proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems. Using a Hobbywing Adaptor (optional) normal/standard sensor motors can be used as well. Note: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors. Specs: Brushless, Sensored, Waterproof 1/8 ESC Cont./Peak Current: 160A/1050A Input Voltage: 3-6S Lipo BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode) Input Wires: 10AWG-150mm Output Wires: No Input Connectors: XT90 Output Connectors: 6.5mm Bullet Connectors (Female) Fan Size: 30x30x10mm Fan Voltage Range: 6V/7.4V/8.4V Fan Powered by: BEC Size: 60x48x40.5mm Weight: 192g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in Bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported Applications: Motors: Sensored brushless motors / Sensorless brushless motors Vehicles: 1/8th On-road, Short course trucks & Monster trucks KV Rating/T Count: With 4S Lipo: KV≤3000; With 6S Lipo: KV≤2400 4278 size motor

1.695,-

1.795,-

KJØP
-6%
Hovedbilde Traxxas 3458 Heat Sink for Velineon 3500 & 540XL
Traxxas 3458 Heat Sink for Velineon 3500 & 540XL
Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

129,-

KJØP
Hovedbilde Proline 1015610 Badlands MX SC 2.2 Hovedbilde Proline 1015610 Badlands MX SC 2.2
Proline 1015610 Badlands MX SC 2.2"/3.0" M2 All ...
Badlands MX SC 2.2"/3.0" M2 (Medium) All Terrain Tires Mounted for Slash 2wd & Slash 4x4 Front or Rear, Mounted on Raid Black 6x30 Removable Hex Wheels   This is a pair of pre-mounted Badlands MX SC Tires on Raid Black 6x30 Removable Hex Wheels. Are you ready for the most Extreme Badlands Short Course Tires Pro-Line has ever made? Introducing the all-new Badlands MX SC tires that have been redesigned from the ground up to chew up the dirt and spit it out in a huge spray behind your SC truck! The Badlands MX SC tire uses the latest in motocross tread technology with huge, long-lasting lugs giving it the style and performance that have won over bashers across the globe. The oversized grass and dirt shredding lugs offer you the ultimate in performance under all-terrain type conditions. Compared to the previous Pro-Line Badlands tires, you can expect even better traction, improved wear resistance, and enhanced style! Made from Pro-Line’s legendary soft yet durable M2 compound, the Badlands tire is poised for battle and ready to take your Short Course Truck to the next level of bashing heaven. The Badlands MX SC tires are mounted to a pair of Raid SC Removable Hex Wheels. We take the guesswork out of your glue job by doing the mounting for you so you can spend your time having fun! Pro-Line is proud to introduce a true next-generation Short Course wheel design – the Raid 2.2"/3.0" Removable Hex Wheel for all Short Course Tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! Now you can with the new 6x30 Removable Hex system from Pro-Line. The wheels include a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd Rear) hexes and a pair of 12mm Slash® 2wd Front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac™ offset 12mm hexes (6355-00) are available separately to fit your exact application. If your wheel hex ever gets damaged, it can easily be replaced without needing to replace your glued tires (6354-00 Replacement Slash® Hexes)! These new Raid SC wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a new must-have wheel for Short Course Trucks everywhere! Get your new Raid SC pre-mounted tires today! Tire Features: Awesome Motocross-Inspired Appearance Bigger, Bolder, and Badder than Ever Incredible Traction on Loose, Loamy or Muddy Terrain Improved Wear Resistance Combined with Modern Style Made from Pro-Lines Legendary M2 Race Rubber Less Time Gluing and More Time Having Fun Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel Features: Removable Hexes Allow You to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 14mm, 17mm and 12mm ProTrac™ Offset Hexes The 2 Most Common 12mm Offset Hexes are Included! Fits any of Pro-Line's 6x30 Removable Wheel Hexes for Tons of Custom Offset Options Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included What`s Included: Badlands MX SC mounted on Raid 2.2"/3.0" Black 6x30 Removable Hex SC Wheels (2 pcs) 6x30 to 12mm Hex Adapters (Slash® 4x4 Front/Rear & Slash® 2wd Front) (2 pcs of each size) M3 x 12mm long SHCS hardware (12 pcs) Closed Cell Inserts (2 pcs) Fits: Slash® 2wd Front or Rear Slash® 4x4 Front or Rear Requires 6355-00 to fit 14mm, 17mm and 12mm ProTrac™ Offset Trucks

479,-

599,-

KJØP
-20%
Hovedbilde Traxxas 3456 Cooling Fan Kit
Traxxas 3456 Cooling Fan Kit
Cooling Fan Kit (Velineon 3500/ 540XL) (Need Heat Sink #3458

299,-

329,-

KJØP
-9%
Hovedbilde BSD 7018W 9KG Servo Metal Gear Waterproof
BSD 7018W 9KG Servo Metal Gear Waterproof
BSD 7018W 9KG Servo Metal Gear Waterproof Vantett servo fra BSD Torque er 9.0 kg - 4.8V 40mm x 19mm x 37mm (Lengde x bredde x høyde) Spines - 25 tenner Speed 0,13 sek / 60 grader MERKE BSD MODELL 213R Chebi, 213T Chebi (Børste), 221T Giant Racer Buggy (Børste), 222R Giant Racer Truggy, 222T Giant Racer Truggy (Børste), 502T Truggy, 701G Buggy (Børste), 701G-R Buggy, 706T Monster Truck (Børste), 801 Monster Truck, 803T Land Ripper, 808T Monster Truck, 809T Buggy, 904T Truggy, 909 Monster Truck, 910T Ramasoon  

399,-

429,-

KJØP
-7%
Hovedbilde HPI Z663 Lock Nut M3 (6pc)
HPI Z663 Lock Nut M3 (6pc)
THIS PART FITS THE FOLLOWING KITS / PARTS: Vorza Flux Savage X 4.6 Baja 5SC Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Baja 5b SS Kit Savage XL Flux Baja 5b D-Box 2 Baja 5B Sidewinder X5 Baja 5B TSk-b Class 1 SAVAGE XS FLUX VGJR VENTURE TOYOTA FJ CRUISER GREY VENTURE TOYOTA FJ CRUISER... VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE... WR8 FLUX KEN BLOCK GYMKHANA FORD... WR8 3.0 KEN BLOCK GYMKHANA FORD...STD JUMPSHOT MT V2.0 JUMPSHOT SC V2.0 JUMPSHOT ST V2.0 Savage XS Flux Chevrolet El Camino...

45,-

KJØP
Hovedbilde LouiseRC 3348BC Wheel Crawler 1.9
LouiseRC 3348BC Wheel Crawler 1.9" Class 1 Black ...
Louise 1.9" Class-1 Black-Chrome Wheels Fits: 1/10 Scale Crawlers with 12 mm hexes Specs: Wheel diameter: 1.9" Hex: 12 mm Wheel finish: Black-Chrome Nylon  

119,-

KJØP
Hovedbilde HPI Z529 FLAT HEAD SCREW M3x15mm (6pcs)
HPI Z529 FLAT HEAD SCREW M3x15mm (6pcs)
Phillips Head FLAT HEAD SCREW

39,-

KJØP
Hovedbilde HPI Racing 100919 Pinion Gear 20 Tooth 1M/5mm Shaft ...
HPI Racing 100919 Pinion Gear 20 Tooth 1M/5mm Shaft ...
This is the stock 20 Tooth Pinion Gear for the Savage Flux from HPI Racing. FEATURES: Hardened steel construction INCLUDES: One 20 Tooth Pinion Gear with set screw REQUIRES: Installation on motor shaft       (11)

159,-

179,-

KJØP
-11%
Hovedbilde HPI Racing 101209 Front Hub Carriers Left/Right 10 ...
HPI Racing 101209 Front Hub Carriers Left/Right 10 ...
These are the Front Hub Carriers for the HPI WR8 and Bullet Series. FEATURES: Plastic construction INCLUDES: Left and Right Front Hub Carriers REQUIRES: Four 5x10mm Ball Bearings       (11)

99,-

119,-

KJØP
-17%
Hovedbilde HPI Racing 107900 Rear Suspension Arm Set
HPI Racing 107900 Rear Suspension Arm Set
This is the Rear Suspension Set  For the HPI Racing WR8 1/8 Rally Cars     FEATURES Made of black plastic   INCLUDES Two suspension arms  Two plates   SPECIFICATIONS  Arm, length: 73mm (2-7/8")  width: 13mm (1/2")  height: 43mm (1-3/4")  Plate, length: 56mm (2-1/4")  width: 38mm (1-1/2")  thickness: 2.7mm (3/32")   COMMENTS This part can be installed on  HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V.  HPI Racing 1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC  HPI Racing 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

169,-

KJØP
Hovedbilde HPI Racing 101302 Front Outer Suspension Shaft 3x25mm ...
HPI Racing 101302 Front Outer Suspension Shaft 3x25mm ...
This is the 3x25mm Front Outer Suspension Shaft (2pcs)For the HPI Racing Bullet Series FEATURES Steel construction INCLUDES Two suspension shafts Three E-clips COMMENTS The HPI Racing Bullet Series includes Bullet ST Flux 2.4GHz RTR Bullet MT Flux 2.4GHz RTR Bullet ST 3.0 Nitro 2.4GHz RTR Bullet MT 3.0 Nitro 2.4GHz RTR 

45,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png