Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / Savage XL Flux / HPI Z529 FLAT HEAD SCREW M3x15mm (6pcs)

HPI Z529 FLAT HEAD SCREW M3x15mm (6pcs)

Art.nr: Z529

39,-

Hpi Racing

Hpi Racing
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Phillips Head

FLAT HEAD SCREW

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde Hitec 57344 Servo Extension 6
Hitec 57344 Servo Extension 6"
Hitec 57344 Servo Extension 6"  This is a 6" Servo Extension by Hitec. FEATURES:            This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Installation SPECS:    Length: 6" (152mm) COMMENTS:                            Wire color code: Hitec-                            Black:  negative                            Red:    positive                            Yellow: signal

49,-

59,-

KJØP
-17%
Hovedbilde Yeah Racing YA-0180BU Tornado High Speed Cooling Fan ... Hovedbilde Yeah Racing YA-0180BU Tornado High Speed Cooling Fan ...
Yeah Racing YA-0180BU Tornado High Speed Cooling Fan ...
Yeah Racing Tornado High Speed Cooling Fan (BU) 30x30mm for Motor Heat Sink Description: Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you. Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan. The maximum power input voltage is 8.4v (2 cells Li-Po) Feature: For: ESC / Heatsink / Motor Color: Blue Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.501CFM. Current: 0.28A Weight: 9.0g Connector: JST Include: Tornado Cooling Fan (1 Pc) Round Head Fitting Screw (4 Pc) Instruction Manual (1 Pc)

119,-

129,-

KJØP
-8%
Hovedbilde Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm Hovedbilde Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm
Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm
VAPEX LiPo-Safe Bag-D 125x64x50mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Perfect for 1/16-1/18 car batteries, 1-2s Shorty LiPo's and smaller airplane batteries Fits inside the storage Bag-E Velcro Flap Size: 125x64x50mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

89,-

KJØP
-11%
Hovedbilde Protoform 629600 1/10 - 1/12 Car Bag Hovedbilde Protoform 629600 1/10 - 1/12 Car Bag
Protoform 629600 1/10 - 1/12 Car Bag
Protoform 6296-00 1/10 - 1/12 Car Bag   ROTOform Car Bag 1:12 – 1:10 The PROTOform Car Bag is a stylish and convenient way to carry your 1:10 or 1:12 car to and from the track. Made from a high-quality heather gray material embroidered with the PROTOform wordmark, this cinch-style bag easily fits a 190mm touring car complete with body and wing attached. Not only will your ride be protected from dirt or scratches during transport, you can also toss the bag over your shoulder to free up your hands to carry or tow your other RC gear. Features: Premium PF style Heather gray color Embroidered logo on both sides Fits 190mm TC or 1:12 cars including body/wing  Measures:     Length: 463mm Width: 304mm

199,-

379,-

KJØP
-47%
Hovedbilde HPI Racing 100919 Pinion Gear 20 Tooth 1M/5mm Shaft ...
HPI Racing 100919 Pinion Gear 20 Tooth 1M/5mm Shaft ...
This is the stock 20 Tooth Pinion Gear for the Savage Flux from HPI Racing. FEATURES: Hardened steel construction INCLUDES: One 20 Tooth Pinion Gear with set screw REQUIRES: Installation on motor shaft       (11)

159,-

179,-

KJØP
-11%
Hovedbilde HPI 101300 Racing Rear Inner Suspension Shaft 3x56.3mm ...
HPI 101300 Racing Rear Inner Suspension Shaft 3x56.3mm ...
This is the 3x56.3mm Rear Inner Suspension Shaft (2pcs)  For the HPI Racing WR8 and Bullet Series     FEATURES Steel construction   INCLUDES Two suspension shafts  Three E-clips   COMMENTS This suspension shaft can be installed on  1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR  1/10 Bullet MT 3.0 Nitro 2.4GHz RTR  1/10 Bullet ST 3.0 Nitro 2.4GHz RTR  1/10 Bullet MT Flux 2.4GHz RTR  1/10 Bullet ST Flux 2.4GHz RTR

59,-

KJØP
Hovedbilde HPI 101239 Racing Pin 1.7x11mm
HPI 101239 Racing Pin 1.7x11mm
This is the Pin 1.7x11mm (10pcs)  For the HPI Racing WR8 rally car     FEATURES Steel construction   INCLUDES Ten pins   COMMENTS This pin can be installed on the  1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

29,-

KJØP
Hovedbilde HPI Racing 101299 Front Inner Suspension Shaft 3x57mm ...
HPI Racing 101299 Front Inner Suspension Shaft 3x57mm ...
This is the 3X57mm Front Inner Suspension Shaft For the HPI Racing WR8 and Bullet Series FEATURES Metal construction INCLUDES Two suspension shafts Three E-clips COMMENTS This shaft can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT Flux 2.4GHz RTR 1/10 Bullet ST Flux 2.4GHz RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

45,-

KJØP
Hovedbilde HPI Racing 101302 Front Outer Suspension Shaft 3x25mm ...
HPI Racing 101302 Front Outer Suspension Shaft 3x25mm ...
This is the 3x25mm Front Outer Suspension Shaft (2pcs)For the HPI Racing Bullet Series FEATURES Steel construction INCLUDES Two suspension shafts Three E-clips COMMENTS The HPI Racing Bullet Series includes Bullet ST Flux 2.4GHz RTR Bullet MT Flux 2.4GHz RTR Bullet ST 3.0 Nitro 2.4GHz RTR Bullet MT 3.0 Nitro 2.4GHz RTR 

45,-

KJØP
Hovedbilde HPI Z663 Lock Nut M3 (6pc)
HPI Z663 Lock Nut M3 (6pc)
THIS PART FITS THE FOLLOWING KITS / PARTS: Vorza Flux Savage X 4.6 Baja 5SC Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Baja 5b SS Kit Savage XL Flux Baja 5b D-Box 2 Baja 5B Sidewinder X5 Baja 5B TSk-b Class 1 SAVAGE XS FLUX VGJR VENTURE TOYOTA FJ CRUISER GREY VENTURE TOYOTA FJ CRUISER... VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE... WR8 FLUX KEN BLOCK GYMKHANA FORD... WR8 3.0 KEN BLOCK GYMKHANA FORD...STD JUMPSHOT MT V2.0 JUMPSHOT SC V2.0 JUMPSHOT ST V2.0 Savage XS Flux Chevrolet El Camino...

45,-

KJØP
Hovedbilde LouiseRC 3348BC Wheel Crawler 1.9
LouiseRC 3348BC Wheel Crawler 1.9" Class 1 Black ...
Louise 1.9" Class-1 Black-Chrome Wheels Fits: 1/10 Scale Crawlers with 12 mm hexes Specs: Wheel diameter: 1.9" Hex: 12 mm Wheel finish: Black-Chrome Nylon  

119,-

KJØP
Hovedbilde HPI Z892 Racing Washer 10x12x0.2mm (10)
HPI Z892 Racing Washer 10x12x0.2mm (10)
These are Aluminum Washers by HPI FEATURES: Aluminum Construction Silver in Color INCLUDES: (10) Washers REQUIRES: Installation SPECS:   10mm x 12mm x 0.2mm       (11)

49,-

KJØP
Hovedbilde Hitec 54612S Heavy Gauge Twisted Wire Aileron ...
Hitec 54612S Heavy Gauge Twisted Wire Aileron ...
This is a Heavy Duty 36" Twisted Wire Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference INCLUDES One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

79,-

KJØP
Hovedbilde HPI Racing 86099 - DIFF CASE WASHER 0.7mm (6pcs)
HPI Racing 86099 - DIFF CASE WASHER 0.7mm (6pcs)
Genuine HPI quality spare part for easy maintenance and repairs for HPI's best performance 1/8th scale RTR truck …the Hellfire.

69,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png