Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servoer / Hitec Servoer / Hitec HS-82MG Standard Metal Gear Micro Servo
-9%

Hitec HS-82MG Standard Metal Gear Micro Servo

Art.nr: 32082S

419,-

459,-

- 9%
Hitec

Hitec
** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Hitec HS-82MG Standard Metal Gear Micro Servo

  This is the HS-82MG Metal Gear Micro Servo from Hitec.

FEATURES:

For small planes, gliders, electric helicopters and 1/18 scale cars

INCLUDES:

HS-82MG Metal Gear Micro Servo with universal connector, 0.67" (17mm)
diameter horn, 1.1" (29mm) double arm, 0.90" (23mm) 4-point horn and mounting hardware

REQUIRES: Installing in model and connecting to receiver

SPECS:   

          Speed: 0.12 sec/60° at 4.8V
                           0.10 sec/60° at 6.0V
          Torque: 38.88oz-in (2.8kg-cm) at 4.8V
                  47.22oz-in (3.4kg-cm) at 6.0V
          Weight: 0.66oz (19.0g)
          Size: 1.17 x 0.47 x 1.16" (29.8 x 12.0 x 29.6mm)

Produsent

Hitec

Hitec

Relaterte produkter

 

Hovedbilde Hitec HS-81 Standard Micro Servo U
Hitec HS-81 Standard Micro Servo U
Art.nr: 31081S
Copied
  This is a Hitec HS-81S Micro Servo with a           Universal Futaba J, Hitec S, JR and Airtronics Z Connector.    Connector is compatible with all modern receivers and wiring accessories FEATURES: Compact, Lightweight Design-Ideal for Electric Airplanes and             Sailplanes           Strong, Dependable Gear Train           High Torque and High Speed           Mounts with Two Screws INCLUDES: One HS-81S Micro Servo with 6-3/4" connector wire.           One 7/8"x7/8" X-shaped servo horn           One 1-1/8" long straight servo horn           Two brass eyelets           Two mounting screws           Two servo grommets           One servo horn screw REQUIRES: Radio system. SPECS:    Transit Speed: 0.11 sec/60° @ 4.8V                          0.09 sec/60° @ 6.0V           Output Torque: 36.10 oz-in  @ 4.8V (2.6 kg-cm)                          41.66 oz-in  @ 6.0V (3 kg-cm)           Length: 1.17" (29.8mm)           Width:  0.47" (12mm)           Height: 1.16" (29.6mm)           Weight: 16.6g (0.58oz)           Mounting holes on-center: 1.31"(33.27mm)

269,-

299,-

** Ikke på lager
KJØP
-10%
Hovedbilde Hitec HS-805MG Mega Metal Gear Servo
Hitec HS-805MG Mega Metal Gear Servo
Art.nr: 805MG
Copied
Dette er servo til 1/5 skala biler. 1/5 scale.   This is the HS-805MG Analog Mega Scale Servo from Hitec. FEATURES: Dual ball bearings           Durable metal gears           Heavy duty horn and hardware set           Water and dust resistance INCLUDES: One HS-80MG Mega Scale Servo with Preinstalled Round Servo Horn           One Y-Harness           Four Rubber Grommets           Four Brass Eyelets           Four 2x15mm Flanged Button Head Screws           One One-Armed Servo Horn           One X-Shaped Servo Horn SPECS:    Operating Speed: 0.19sec/60° at 4.8V                            0.14sec/60° at 6.0V           Output Torque: 19.8kg-cm (275oz-in) at 4.8V                          24.7kg-cm (343oz-in) at 6.0V           Weight: 197g (6.95oz)           Size: 66 x 30 x 57.6mm (2.59" x 1.18" x 2.26") COMMENTS: Must be used with at least a 1200mAh NiCd/NiMH Battery (5-6 cells)           Power must be fed directly to the servo without going through the            B.E.C. regulator

947,-

På lager 2
KJØP
Hovedbilde Hitec HS-5646WP High Voltage, High Torque, ...
Hitec HS-5646WP High Voltage, High Torque, ...
Art.nr: 35646S
Copied
Perfekt til å erstatte Traxxas 2075! Husk at denne har 24T spline, så Traxxas sitt originale servohorn vil ikke passe på denne, og må byttes ut.   Our new waterproof servos have what it takes to keep your radio control vehicle, airplane or robot watertight! With high torque, dual ball bearings and metal gears, our digital waterproof servos have the industry’s first IP67* rating ranking them among the most durable and reliable servos for wet conditions. Whether you are manning your power boat, bashing in the mud, directing your underwater robot, or water landing your 25% plane, the HS-5646WP will dependably keep your mind at ease. Specifications   Motor Type: 3 Pole Bearing Type: Dual Ball Bearing Speed (6.0V/7.4V): 0.20 / 0.18 Torque oz./in. (6.0V/7.4V): 157 / 179 Torque kg./cm. (6.0V/7.4V): 11.3 / 12.9 Size in Inches: 1.65 x 0.83 x 1.57 Size in Millimeters: 41.8 x 21.0 x 40.0 Weight oz.: 2.15 Weight g.: 61

599,-

799,-

På lager 5
KJØP
-25%
Hovedbilde Hitec HS-225BB Mighty Mini BB Servo U
Hitec HS-225BB Mighty Mini BB Servo U
Art.nr: 31225S
Copied
 This is the Hitec/RCD #31225S HS-225BB Mighty Mini Ball Bearing Servo            with Futaba J, Hitec/JR/Airtronics Z style connector.    Connector is compatible with all modern receivers and wiring accessories. FEATURES:  Mini servo with ball bearing and plastic gears            Great for small planes and hand launch gliders. INCLUDES:  1  HS-225BB servo with pre-installed circular horn            1  Straight horn            1  "X" horn            1  Adjustable arm            4  Black rubber grommets            4  Brass servo eyelets            4  Servo mount screws SPECIFICATIONS:  Length- 32.4mm (1.3")       Weight- 27g (0.95oz)                  Width - 16.8mm (0.7")       Torque- 3.9 kg-cm (56.4 oz-in)                  Height- 30.8mm (1.2")       Speed - 0.14 sec/60°

299,-

329,-

** Ikke på lager
KJØP
-9%
Hovedbilde Hitec HS-85MG+ Premium Metal Gear Micro Servo U
Hitec HS-85MG+ Premium Metal Gear Micro Servo U
Art.nr: 32085S
Copied
 This is the HS-85MG+ Mighty Micro Servo from Hitec with          Universal Futaba J, Hitec S, JR and Airtronics Z Connector.    Connector is compatible with all modern receivers and wiring accessories. FEATURES: Lightweight and small; ideal for sailplane or weight-sensitive             applications           Metal gears           Aluminum output gear           Shock protected POT INCLUDES: One HS-85MG+S metal gear micro servo           Two screws, grommets and eyelets           Two servo arms and one wheel SPECS:    L: 29mm x W: 13mm x H: 30mm (1.14" x 0.51" x 1.18")           Transit: 0.16 sec/60° (4.8V)  0.14 sec/60° (6.0V)           Torque @ 4.8V: 3.0 kg-cm, (41.66 oz-in)                  @ 6.0V: 3.5 kg-cm, (48.6 oz-in)           Weight: 21.9g (0.77oz)

389,-

På lager 9
KJØP
Hovedbilde Hitec HS-77BB Low-Profile Ball Bearing Servo U
Hitec HS-77BB Low-Profile Ball Bearing Servo U
Art.nr: 31077S
Copied
 This is a low profile aileron servo designed to fit in the wing itself.   This allows the use of two aileron servos for more precision. Comes with a          Universal Futaba J, Hitec S, JR and Airtronics Z Connector. FEATURES:    One ball bearing on the output shaft    One internal metal gear (NOT THE OUTPUT GEAR, it is nylon)    Water tight SPECS:    Dimensions: 44x23x25mm (1.7x0.9x1.0")    Weight:  35 grams (1.23oz)    Speed: .18sec/60° @4.8V .14sec/60° @6.0V    Torque: 61.1 oz-in @4.8V, 76.3 oz-in @6.0V

419,-

På lager 5
KJØP
Hovedbilde Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...
Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...
Art.nr: 35565S
Copied
This is the Hitec HS-5565MH High Voltage, High Speed Digital Servo.     FEATURES Ideal for 1/10 scale touring cars, buggies and short course vehicles,  helicopters up to .90 size, and sport to high performance aircraft  up to 25 percent  Heavy duty metal gears and dual ball bearings  Coreless motor   INCLUDES HS-5565MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round  Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single  Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and  Instructions   SPECIFICATIONS  Operating Voltage: 6.0 - 7.4V DC  6.0V 7.4V  Speed: 0.11 sec/60° 0.09 sec/60°  Torque: 153 oz-in (11 kg-cm) 194 oz-in (14 kg-cm)  Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 37.8mm)  Weight: 2.10oz (60g)  Wire Length: 11.8" (30mm)  Wire Gauge: 25AWG  Operating Temperature Range: -4 to 140°F  Idle Current: 4mA  Stall Current: 2100mA @ 6.0V, 2700mA @ 7.2V  Potentionmeter Type: 4 slider 1M cycle   COMMENTS A note on coreless motors-a conventional servo motor has a steel core  armature wrapped with wire that spins inside the magnets. In a  Coreless design, the armature uses a wire mesh that forms a cup  that spins around the outside of the magnet. This arrangement is  much lighter resulting in smoother operation and faster response  time.

995,-

1.095,-

På lager 1
KJØP
-9%

Kunder kjøpte også

Hovedbilde Traxxas 2968 LiPo Cell Voltage Checker/Balancer
Traxxas 2968 LiPo Cell Voltage Checker/Balancer
LiPo Cell Voltage Checker/Balancer (2968) The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the required Balance Lead Adapter (#2938X). Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.   2938X sold separately and shown for reference only.

349,-

379,-

På lager 1
KJØP
-8%
Hovedbilde CHHL Racing Series 2S 5200mAh - 100C - Deans - ... Hovedbilde CHHL Racing Series 2S 5200mAh - 100C - Deans - ...
CHHL Racing Series 2S 5200mAh - 100C - Deans - ...
CHHL Racing Series 2S 5200mAh - 100C - Deans - Hardcase Dimensjonene er 139x47x25 og passer i ett utvalg med 1/10-biler med mer. Deans-type kontakt.   Spesifikasjoner: Kapasitet: 5200mAh Spenning: 2S 7.4V Vekt: 266.5gram Størrelse: 139x47x25mm Strømplugg:    Deans

399,-

429,-

På lager 6
KJØP
-7%
Hovedbilde DynoMAX B9850 Connector Adapter EC3 (male) - XT60 ... Hovedbilde DynoMAX B9850 Connector Adapter EC3 (male) - XT60 ...
DynoMAX B9850 Connector Adapter EC3 (male) - XT60 ...
DynoMAX Connector Adapter EC3 (male) - XT60 (female) This is an practical connector adapter for batteries with an EC3 connector where you want to change it to an XT60 connector without soldering etc.   It also works if you have an charge lead with an XT60 connector but you have an vehicle with a EC3 connector system.

39,-

På lager 5
KJØP
Hovedbilde Dynomax B9333 Connector XT30 2mm pair
Dynomax B9333 Connector XT30 2mm pair
Connector XT30 2mm pair 1 male & 1 female

35,-

På lager 3
KJØP
Hovedbilde APC 13x6.5 Electric Propeller
APC 13x6.5 Electric Propeller
This is a 13x6.5E Electric ONLY Composite Propeller from Advanced Precision Composites FEATURES Gray composite one-piece construction Comes with five adapter rings that adapt to different motor shafts Comes in a bag attached to a header card INCLUDES One composite propeller Five composite adapter rings REQUIREMENTS ALL props require balancing, this is VERY important. May need prop reamer. SPECIFICATIONS Diameter: 13" Pitch: 6.5 Hub inner diameter: 0.25"

79,-

På lager 2
KJØP
Hovedbilde APC Propeller 10x5 Electric
APC Propeller 10x5 Electric
Propeller 10x5 Electric

59,-

** Ikke på lager
KJØP
Hovedbilde DynoMAX 9690 Charge Lead XT60 with 4mm banana ...
DynoMAX 9690 Charge Lead XT60 with 4mm banana ...
Charge Lead XT60 with 4mm banana connectors

109,-

** Ikke på lager
KJØP
Hovedbilde Radient 010023 XT60 PAIRS INCLUDING HEAT SHRINK (5PCS)
Radient 010023 XT60 PAIRS INCLUDING HEAT SHRINK (5PCS)
XT60 PAIRS INCLUDING HEAT SHRINK (5PCS)

149,-

På lager 2
KJØP
Hovedbilde Absima 800CPS / 61WT Silicone Shock Oil 60ml
Absima 800CPS / 61WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 800. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

På lager 3
KJØP
Hovedbilde Traxxas 1647 Silicon Grease
Traxxas 1647 Silicon Grease
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Ikke på lager
Hovedbilde Hitec 57347 Servo Extension 36
Hitec 57347 Servo Extension 36"
  This is a 36" Servo Extension from Hitec. FEATURES: 36" long with universal connectors   INCLUDES: One Servo Extension   SPECS:    Length: 36" (91.4cm)

59,-

** Ikke på lager
KJØP
Hovedbilde DynoMAX 9569 Connector Bullet 5mm Male Car 10pcs Hovedbilde DynoMAX 9569 Connector Bullet 5mm Male Car 10pcs
DynoMAX 9569 Connector Bullet 5mm Male Car 10pcs
INFORMATION Low-profile 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors. Low Resistance Gold Plating 2U-3U Weight: 2.5 g (each) Diameter: 5 mm Depth/Length: 16 mm Flange thickness: 2.3 mm Package Includes: 10 pcs of male connectors   Low-profile 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors.   Low Resistance Gold Plating 2U-3U Weight: 2.5 g (each) Diameter: 5 mm Depth/Length: 16 mm Flange thickness: 2.3 mm   Low-profile 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors.   Low Resistance Gold Plating 2U-3U Weight: 2.5 g (each) Diameter: 5 mm Depth/Length: 16 mm Flange thickness: 2.3 mm

149,-

På lager 4
KJØP
Hovedbilde Traxxas 5454 Stub Axle Steel Revo (2)
Traxxas 5454 Stub Axle Steel Revo (2)
This is a pair of replacement Stub Axles for the Traxxas Revo.                      The wheels attach to the axles. FEATURES: Steel construction INCLUDES: Two stub axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 1.3" (33mm)

59,-

På lager 1
KJØP
Hovedbilde Traxxas 5453 Yokes Stub Axle w/Pins
Traxxas 5453 Yokes Stub Axle w/Pins
This is a pair of replacement Drive Yokes for the Traxxas Revo.               These yokes attach to the half shaft assemblies. FEATURES: Black plastic construction INCLUDES: Two yokes           Two drive pins REQUIRES: Nothing.  These are direct replacement parts.  

49,-

På lager 1
KJØP
Hovedbilde Traxxas 3934 Body Clips (12)
Traxxas 3934 Body Clips (12)
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

På lager 4
KJØP
Hovedbilde Traxxas 5827X Hold down, battery/ hold down retainer
Traxxas 5827X Hold down, battery/ hold down retainer
This extended battery hold down for the Slash or Slash 4x4 allows for lipo packs of up to 42mm tall to fit in the stock tray. Allows for installation of taller, multi-cell batteries

75,-

På lager 2
KJØP
Hovedbilde Traxxas 3727 Battery Hold Down Plate Rustler
Traxxas 3727 Battery Hold Down Plate Rustler
  This is the Traxxas #3727 Rustler Battery Hold-Down Plate, Metal Post and Body Clip replacement parts for the Rustler truck. INCLUDES:  1  Black plastic hold-down plate,  (2 5/8" long, 3/8" wide and                  has 2 holes that attach to the posts).            2  Metal posts  (Aluminum with a hex shaped top and hole                  for the body clip, threaded on bottom).            2  Steel body clips.   COMMENTS: Body clips are bent for easier installation.    

39,-

På lager 5
KJØP
Hovedbilde Traxxas 3678X Wheelie Bar Assembled
Traxxas 3678X Wheelie Bar Assembled
This is an optional Wheelie Bar in Blue for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, blue in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

På lager 2
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png