Hopp til innhold

Hitec 54404 Micro Switch Harness w/4 AAA-box

Art.nr: 54404

85,-

Hitec

Hitec

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Micro switch harness with 4 AAA Battery box

Produsent

Kunder kjøpte også

Enakslet throttel stikke (opp / ned) og enakslet styring (venstre / høyre) Proporsjonal styring og gassregulering med justerbare dual rates Digitale trimmer på styre- og gass-kanaler Servo reversering på styring og gassregulering En 3. kanal med dreiehjul (CH4) En 4. kanal med 3-punkts bryter (H3) AFHSS Proteus protokoll 2,4 GHz Tx ladeport for oppladbare batterier (ikke inkludert) Hva er i Esken 1x Planet 2 + 2 sender 1x Planet Proteus 6-kanals mottaker 1x Brukerhåndbok Du trenger 4x batterier i AA-størrelse for sender. Produktbeskrivelse I årevis har Planet stabil og en meget bra radio for rc brukeren. Det er en meget stabil og fin 2.4 GHZ radio takket være en bunnsolid 2.4 GHZ teknologi. TS2 + 2-sticksender (Tx) er en enkel å bruke, og er en  allsidig 4-kanals bil eller båtradio med to stikke-kanaler og to hjelpekanaler. Den er perfekt for nybegynnere til båter, biler, tog og mye mer. Du vil raskt finne ut at det er smart med ett par ekstra kanaler på din radio, for å styre ekstra funksjoner. Som lys, horn, pumper etc etc For det første er det to ekstra kanaler, den ene betjenes av en treposisjonsbryter, den andre av en variabel skive. De er perfekte for de ekstra funksjonene, spesielt med båter. Både CH1 og Ch2 har justerbare DUAL RATES, slik at kontrollresponsen kan tilpasses. For eksempel på en 2-kanals glider kanutslaget justeres for å forbedre modellens fly egenskaper Planeten TS2 + 2 er enkel å bruke, enkel å leve med, alt du trenger for å komme i gang.

1.199,-

1.249,-

KJØP
-4%
Gear set (for 2070, 2075 servos)

49,-

KJØP
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

69,-

KJØP
This is the Locking Differential Ouput Gear for use on the                      Traxxas Summit Truck RTR. FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear           One Differential Slider           One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

149,-

169,-

KJØP
-12%
This is the replacement Servo Case and Gasket Set for the Traxxas                 2056 - and 2075 (we don't stock) Servos FEATURES: Three piece plastic case molded in blue and black color           Replaces worn or damaged servo cases and gaskets INCLUDES: One Upper Case (blue plastic)           One Middle Case (blue plastic)           One Lower Case (black plastic)           One Upper Case Gasket           One Lower Case Gasket           One Output Shaft O-Ring           Four Case Screw O-Rings REQUIRES: Assembly  

79,-

KJØP
This is an optional Bearing Adapter for the Slash 4X4. FEATURES: 6061-T6 anodized blue aluminum construction           Steel 10x15x4mm ball bearing with blue rubber seal           Used on slipper shaft INCLUDES: One aluminum adapter           One 10x15x4mm ball bearing REQUIRES: Installation on to slipper shaft           Remaining clutch pieces

69,-

KJØP
This is the Differential Gear Set for the Traxxas Revo and E-Maxx. And Summit. FEATURES: Steel construction INCLUDES: Two Output Gears           Two Spider Gears           Spider Gear Shaft and Diff Carrier Support           Instruction Sheet REQUIRES: Diff lube;           10K weight TRX 5135           50K weight   TRX 5137                    30K weight TRX 5136           Multi-weight set  TRX 5136X

199,-

219,-

KJØP
-9%
Servo horn for Monster Truck 1:10 (706T og 909T) samt Utor og Ramasoon. Kommer 1 stk i pakken

29,-

KJØP
Adapter, T-plug han - Traxxas hun

59,-

Ikke på lager
This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:   6mm           Diameter: 3mm

35,-

KJØP
Kvantum: 4 stk per pakke. 1.5 Volt per batteri. Passer alle plasser hvor du kan bruke AAA-batterier.

29,-

KJØP
Traxxas 6591 - Pro Scale Lighting Kit Traxxas LED lighting sets the standard for adventure after dark with authentic shadow-chasing brightness on the trail. Now, Traxxas LED lighting is even more realistic with the new Pro Scale Advanced Lighting Control System. The Pro Scale system puts you in command of high- and low-beam headlights; turn signals; brake lights; reverse lights; and even hazard signals for the ultimate in scale off-roading. Kit Contents: Pro Scale Lighting Power Module Power module chassis mount Pro Scale Lighting Distribution Block Motor sense wire harness Breakaway cable (part of the distribution block) MAXX® Link cable (Data Link) (TQi Radio System only) Receiver communication cable 2.6x8mm button-head cap screw (2) 2.5x10mm countersunk cap screw (1) 2.5x12mm cap screw (1) 2.5x18mm cap screw (1) Zip ties (10) Silicone grease Tools required: 2.0mm hex wrench (part #3415, sold separately) Wire cutters (to trim zip ties) Small needle nose pliers *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

649,-

699,-

KJØP
-7%
Tips! Denne passer til TRX-4 Ford Bronco 2021. TRX4 Land Rover Defender LED Light Set LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 & 8050 body) Kit Contents: LED lighting module Distribution block Distribution block mount LED light bar LED rock light harness assembly LED headlight harness assembly LED tail light harness assembly 4-in-2 wire harness 2.6x8mm button-head cap screws (2) 2.5x15mm cap screws (2) 2.5x6mm cap screws (2) Zip ties (9) Tools required: 2.0mm hex wrench 1.5mm hex wrench Side cutters (to trim zip ties)

1.249,-

1.349,-

KJØP
-7%
LiPo Cell Voltage Checker/Balancer (2968X)  The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.  NOTE: Do not attempt to use the battery adapters for charging or any purpose other than adapting Traxxas iD batteries to the cell voltage checker.  

439,-

469,-

KJØP
-6%
This Cunning little unit allows the use of any battery from 7 to 25 volts to run your RX flight pack. ◾Input Voltage - 7v to 25v ◾Output Regulated Voltage - 6.0v ◾Output Amps - 5A ◾Weight - 19g ◾Size - 20x15x49mm

199,-

KJØP
This is the Warn 1/10 scale Wireless Remote/Receiver Winch Controller Set from RC4WD. FEATURES For use with the RC4WD Bulldog 9300XT, and the WARN 9.5CTI winches 2.4GHz technology Heavy duty drive circuit Over 10' (3.04m) range Simple hookup INCLUDES Wireless Remote with Battery Receiver 6" (152mm) Battery/Receiver Power Wire 6" (152mm) Receiver/Winch Control Wire SPECIFICATIONS Receiver; Battery Compatibility: 2 and 3 cell LiPo Operating Voltage: 6 - 11.1V (see Comments) Length: 1.6" (40.4mm) Width: 1.2" (30.2mm) Height: 0.37" (9.4mm) Weight: 0.5oz (14g) Wires; Length: 6" (150mm) Wires Weight: 0.14oz (4g) COMMENTS This Wireless Remote/Receiver is not waterproof. Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell lipo.

595,-

KONTAKT
Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1) The Titan® 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque. SPECS:    Length to end of armature: 78mm (3.07")           Diameter of can: 38mm (1.5")           Length of motor leads: 75mm (2.96")           Shaft diameter: (3.2mm) 0.125" COMMENTS: For the standard rotation motor, order TRX 3975.

289,-

299,-

KJØP
-3%
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%
Yeah Racing 1/10 RC Crawler Scale Accessory Luggage Net 200mm x 110mm Yellow Scale Luggage net to keep all your accessories that you have on your roofrack from falling off.       Features: For: Crawler Body Material: Elastic Color: Yellow   Includes: Rock Crawler Accessory Luggage Net (1 pc)

139,-

149,-

KJØP
-7%
Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels - Keep Calm Description: Add character to your crawler rig with our series of tire covers with a wide variety of smart and clever messages. White ink printed on tough synthetic leather to help deal with harsh conditions and for easy cleaning after trail runs.         Features: For: 1.9 inch sized wheels Material: Synthetic Leather   Includes: Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels 1pc

49,-

KJØP
Dette er hitec sin lader for NiMHbatterier til sendere og mottakere. Inn: 100-240V AC 50/60Hz 0.1A Ut: TX: 7.2V DC 80mA RX: 4.8V DC 

179,-

KJØP
Connector Tamiya Pair

25,-

35,-

KJØP
-29%
Body Reamer (Plastic Handle)

329,-

349,-

KJØP
-6%
Connector BEC (JST-RCY) Pair

25,-

35,-

KJØP
-29%
  VAPEX NiMH 3000 mAh Sub-C Cell Single Sub-C sized NiMH cell with solder tabs.   Battery: 1.2V 3000 mAh NiMH Sub-C cell Size: L41.7 x D22.2 mm Weight: 56 g     Type of Battery: NiMH Length: 41,7 mm Weight: 54 g Width: 22,2 mm Capacity: 3000 mAh Number of cells: 1 Voltage: 1,2 V

49,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png