Hopp til innhold
-4%

E-Flite UMX Turbo Timber BNF Basic, 700mm

Art.nr: EFLU6950

2.395,-

2.495,-

- 4%
Horizonhobby

Horizonhobby

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

EVOLUTION OF AN ICON

Scaled down from the legendary Timber® 1.5m, the E-flite® UMX™ Timber was the iconic ultra micro model best-equipped for exciting STOL (Short Take Off and Landing) adventures and beyond…until now. The UMX Turbo Timber updates the original design with a modern turboprop-styled nose and 3-blade propeller, plus a higher-power 3400Kv brushless motor. When using the same 2S 280mAh batteries, this Turbo version provides even better STOL performance with shorter takeoffs and faster climbs. You'll also enjoy extreme aerobatic capabilities and have the power to hover, then climb out vertically. In the hands of experienced pilots, the UMX Turbo Timber can be flown in more places — even off of water with the optional floats (sold separately) — and in smaller spaces. Plus its high-wing configuration and exclusive optional-use SAFE® Select technology provide plenty of stability to make the UMX Turbo Timber a great choice if you've mastered flying at least one model before. This makes it a model that pretty much every pilot, from low-time to long-time experienced alike, should own because everyone will enjoy flying it!

Features

  • Incredible Short Take Off and Landing (STOL) plus sport and aerobatic flight capabilities
  • Uniquely capable and versatile so it can be flown in more places and smaller spaces
  • More powerful 3400Kv motor for the power to hover and climb out vertically
  • Updated turboprop-styled nose, 3-blade prop and trim scheme
  • Updated landing gear design to secure fairings to fuselage
  • Functional oversized flaps for shorter takeoffs and landings
  • Industry-leading Spektrum™ 2.4GHz DSMX® technology
  • Easy to fly with optional-use SAFE® Select flight envelope protection
  • Unmatched stability and locked-in feel of AS3X® technology for smoother flight performance
  • Optional-use leading edge slats for improved STOL and slow flight performance
  • Functional and factory-installed LED landing, navigation and strobe lights
  • Optional floats for flying from water (sold separately)
  • Fully factory-assembled and ready to fly right out the box

MORE POWER AND VERSATILITY

At the heart of the iconic UMX™ Timber® model's evolution into the UMX Turbo Timber® is the addition of a 3400Kv motor and a 3-blade prop. Always known as and still an easy-to-fly, smooth handling, STOL (Short Take Off and Landing) capable airplane, it now has the thrust — with the same 2S 280mAh batteries — to hover and climb out vertically. It can also perform inverted flight, knife edge, snaps, spins and other advanced aerobatic maneuvers with ease. Functional oversized flaps, plus optional-use leading edge slats, offer improved STOL and slow flight performance. Equipped with oversized tundra-style wheels like its predecessor, the UMX Turbo Timber can take off and land on grass and other rough surfaces better than ever before due to the updated landing gear design that secures the fairings to the fuselage. Experienced pilots can fly it indoors in spaces as small as a single basketball court, and almost anyone who's mastered flying at least one other airplane before can fly it successfully outdoors in large yards, small parks, sports fields, at RC flying fields and many other places. Install the optional floats (sold separately) and you can add large pools, small ponds, and lakes to your flying site options. Included LED landing, navigation and simulated strobe lights add to the fun and make it possible to fly from earlier to even later in the day. Best of all the UMX Turbo Timber arrives 100% factory-assembled — and is ready to fly as soon as you bind the installed Spektrum™ receiver to your compatible transmitter!

Needed to Complete

  • Full-range 6+ channel Spektrum DSMX®/DSM2® compatible transmitter
  • 2S 7.4V 200–280mAh LiPo with JST-PH Connector
  • Compatible LiPo charger

What's in the Box?

  • (1) E-flite UMX Turbo Timber® with:
    • (1) 3400Kv Brushless Motor (installed)
    • (5) Linear Servos (installed)
    • (1) Spektrum™ 6-Channel Receiver with brushless ESC (installed)
  • (1) Product Manual

Video Overview

 

More Power

A more powerful 3400Kv motor and 3-blade prop deliver an abundance of power with popular 2S 280mAh batteries, including the thrust to hover and climb out vertically.

 

STOL (Short Take Off and Landing) Capable

The UMX Turbo Timber's wing is designed with features like drooped wingtips, functional oversized flaps, and to accept optional-use leading edge slats (included) for improved slow flight and STOL performance. These features, along with the lightweight design and high-power brushless motor, make it possible to spring into the air or float down to land in less distance than any other similar class model.

 

 

 

Versatile Gear Options

Fly off of surfaces that are impossible for most models of this size to handle: grass, gravel paths, dirt trails, paved surfaces — even pools, ponds and lakes using optional floats (sold separately). The updated landing gear has fairings that are secured to the fuselage and oversized, tundra-style wheels to soak up bumps and provide excellent prop clearance.

 

LED Lights

Like the original UMX Timber, the UMX Turbo Timber comes with realistic-looking LED landing, navigation and simulated strobe lights that are factory-installed and powered from the flight battery.

 

Fully Factory-Assembled

The UMX Turbo Timber arrives 100% factory-assembled and ready to fly right out of the box. It's equipped with industry-leading Spektrum® 2.4GHz technology that binds to your 6+ channel DSMX®/DSM2® equipped transmitter so you can be flying within minutes of opening the box.

 

 

Bind-N-Fly Completion Level Advantage

Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly!

This Bind-N-Fly Basic model is equipped with a Spektrum 2.4GHz DSMX® receiver featuring AS3X (Artificial Stabilization–3-aXis) technology that works behind the scenes to smooth out the effects of wind and turbulence. The result is a heightened sense of stability and precision that makes you feel like you're flying a much larger, expertly tuned aircraft.

If this is your first model of its type, or you want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional-use SAFE® Select flight envelope protection technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual.

 

With SAFE Select enabled, you get:

Pitch and Bank Angle Limits

  • These envelope limits keep the airplane from rolling or pitching upside down. They also prevent excessive climb or dive angles.

Automatic Self-Leveling

  • The airplane instantly returns to and holds level flight when the sticks are released and in the center position. It's also helpful for keeping the wings level during takeoffs/launches and landings.

Easy Switch Assignment—No Complex Programming Required

  • The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any complex programming and takes just a few seconds.

If you don't want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver.

Produsent

Relaterte produkter

 

Art.nr: EFLA700UM
Copied
Charge and Balance Adapter: 2S EFL

129,-

** Ikke på lager
KJØP

Kunder kjøpte også

DynoMAX Connector Adapter T-Plug (male) - XT60 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an XT60 connector without soldering etc.   It also works if you have an charge lead with an XT60 connector but you have an vehicle with a T-Plug connector system.

39,-

På lager 6
KJØP
LiPo, LiFe & LiIon Cell-tester with Low-Voltage Alarm 1-8S This is a small and practical Lithium battery cell-tester with built in low-voltage alarm. With this unit you can easily check your battery packs through the balance connector or have it installed in the model hooked up to the battery balance connector and get an buzzer tone when the set value is reached. Specifications: For 1S with JST-RCY (BEC) connector and 2-8S LiPo, LiFe & LiIon batteries with a JST-XH balance connector LCD: 0.5-4.5V/cell Cells: 1-8S Adjustable alarm value: OFF/2.7-3.8V per cell (pre-set at 3.3V) Volt precision: 0.01V Size: 40,5 x 29 x 13mm Weight: 14g

109,-

** Ikke på lager
KJØP
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

På lager 4
KONTAKT
-7%
Float Set: UMX Carbon Cub SS, UMX Timber

239,-

389,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-39%
This is a 20 Gram Bottle of Zap-O Odorless CA+ Glue from Pacer. FEATURES: An odorless CA that really works!           Great on styrofoam and foam, without a primer.           Medium thick, slow cure.           Works on balsa, plywood and most other hobby materials.           No-more-tears formula.           Won't fog most clear plastics. INCLUDES: One 20 Gram Bottle of Zap-O Odorless CA+ Glue. SPECS:    20 Grams

179,-

189,-

** Ikke på lager
KJØP
-5%
  This is 2oz bottle of Pacer Foam Safe Kicker with Pump. FEATURES: Safe on most foam products           Compatible with most other Foam Safe CAs           Works on Balsa, Spruce, Plywood, Plastic and Metals, etc           Forces most CAs to cure in 10 seconds or less           Increases Gap filling and fillet forming compability           None-fuming formula INCLUDES: One bottle of Pacer Foam Safe Kicker           One pump REQUIRES: Use with CA glues SPECS:    2oz (59.1ml)

139,-

På lager 7
KJØP
Charge and Balance Adapter: 2S EFL

129,-

** Ikke på lager
KJØP
This is a 1/2oz Bottle of Zap-A-Gap CA+ Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Superior gap filling formula. Medium viscosity. Allows approximately 7-10 seconds for part positioning. Average of 20 seconds curing. Works on oily surfaces also. Use Zip Kicker to accelerate cure time. INCLUDES One 1/2oz Bottle of Zap-A-Gap CA+ Glue. SPECIFICATIONS 1/2oz (14.2g)

89,-

** Ikke på lager
KJØP
The ZAP CA Glues are clog-resistant with and have an extra, long tip to reach into tight spots. Easy-to-squeeze bottles aid in applying just the right amount of glue for easier sanding and less mess. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Wicks quickly for instant bonds on tight-fitting parts. INCLUDES One ZAP CA Glue 1/2oz Thin COMMENTS Thin is instant setting: CA Thick is gap filling: CA+

79,-

** Ikke på lager
KJØP
9841 Connector Adapter T-Plug (male) - EC3 (female) DynoMAX Connector Adapter T-Plug (male) - EC3 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an EC3 connector without soldering etc.   It also works if you have an charge lead with an EC3 connector but you have an vehicle with a T-Plug (deans) connector system.        

49,-

** Ikke på lager
KJØP
DynoMAX Connector Adapter XT60 (male) - EC3 (female) This is an practical connector adapter for batteries with an XT60 connector where you want to change it to an EC3 connector without soldering etc.   It also works if you have an charge lead with an EC3 connector but you have an vehicle with a XT60 connector system.

39,-

På lager 2
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png