Hopp til innhold
Hjem / Batteri & lader / Overganger / E-flite EFLA700UM Charge and Balance Adapter: 2S EFL

E-flite EFLA700UM Charge and Balance Adapter: 2S EFL

Art.nr: EFLA700UM

129,-

Horizonhobby

Horizonhobby
** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Charge and Balance Adapter: 2S EFL

Produsent

Horizonhobby

Horizonhobby

Kunder kjøpte også

Hovedbilde Gens Ace Bashing 2s 400mAh - 35C - Gens Ace Bashing ... Hovedbilde Gens Ace Bashing 2s 400mAh - 35C - Gens Ace Bashing ...
Gens Ace Bashing 2s 400mAh - 35C - Gens Ace Bashing ...
  2s LiPo-pakke med 35C kontinuerlig utlading, serien er laget for å kombinere lav vekt og pris, med god kvalitet for din radiostyrte hobby. Batteriet har PH2.0 batteriplugg og XH balanseringplugg . Veier kun 17g. Passer blant annet til SCX24 Spesifikasjoner: Kapasitet: 700mAh Spenning: 2S 11.1V Vekt: 17gram Størrelse: 43x19x11 Strømplugg: PH2.0

199,-

På lager 2
KJØP
Hovedbilde Dynomax 9840 Connector Adapter T-Plug (male) - XT60 ...
Dynomax 9840 Connector Adapter T-Plug (male) - XT60 ...
DynoMAX Connector Adapter T-Plug (male) - XT60 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an XT60 connector without soldering etc.   It also works if you have an charge lead with an XT60 connector but you have an vehicle with a T-Plug connector system.

39,-

På lager 6
KJØP
Hovedbilde DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ... Hovedbilde DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ...
DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ...
LiPo, LiFe & LiIon Cell-tester with Low-Voltage Alarm 1-8S This is a small and practical Lithium battery cell-tester with built in low-voltage alarm. With this unit you can easily check your battery packs through the balance connector or have it installed in the model hooked up to the battery balance connector and get an buzzer tone when the set value is reached. Specifications: For 1S with JST-RCY (BEC) connector and 2-8S LiPo, LiFe & LiIon batteries with a JST-XH balance connector LCD: 0.5-4.5V/cell Cells: 1-8S Adjustable alarm value: OFF/2.7-3.8V per cell (pre-set at 3.3V) Volt precision: 0.01V Size: 40,5 x 29 x 13mm Weight: 14g

109,-

** Ikke på lager
KJØP
Hovedbilde Blade 1305 Main Rotor Blade Set: Nano S2
Blade 1305 Main Rotor Blade Set: Nano S2
Main Rotor Blade Set: Nano S2

75,-

På lager 7
KJØP
Hovedbilde Eflite 1S USB Li-Po Charger, 500mAh High Current UMX
Eflite 1S USB Li-Po Charger, 500mAh High Current UMX
Eflite 1S USB Li-Po Charger, 500mAh High Current UMX   Connector Type PH 2.0 (High-Current Ultra Micro)

175,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Hovedbilde SkyRC e450 ChargerLiPo/LiFe/LiHV 2-4S, NiMH 6-8, 50W ... Hovedbilde SkyRC e450 ChargerLiPo/LiFe/LiHV 2-4S, NiMH 6-8, 50W ...
SkyRC e450 ChargerLiPo/LiFe/LiHV 2-4S, NiMH 6-8, 50W ...
e450 ChargerLiPo/LiFe/LiHV 2-4S, NiMH 6-8, 50W 240VAC THE SET CONTAINS: SkyRC e450 Charger AC Power Cord XT60 Charging Cable Specifications: AC Input: 100-240V Battery Types: LiPo, LiFe, LiHV & NiMH Lithium Battery Cell Count: 2-4 NiMH Battery Cell Count: 6-8 Charge Current: 1A/2A/3A/4A Current Drain for Balancing: 300mA Circuit Power: 50W Size: 110.7 x 69.4 x 40.5 mm Weight: 103 g

399,-

469,-

** Ikke på lager
KJØP
-15%
Hovedbilde Modellfly Nr 2 April 2022
Modellfly Nr 2 April 2022
Modellfly Nr 2 April 2022 Friflukt: World Cup i California

129,-

På lager 2
KJØP
Hovedbilde Zap Adhesives Foam Safe Kicker 2 oz Hovedbilde Zap Adhesives Foam Safe Kicker 2 oz
Zap Adhesives Foam Safe Kicker 2 oz
  This is 2oz bottle of Pacer Foam Safe Kicker with Pump. FEATURES: Safe on most foam products           Compatible with most other Foam Safe CAs           Works on Balsa, Spruce, Plywood, Plastic and Metals, etc           Forces most CAs to cure in 10 seconds or less           Increases Gap filling and fillet forming compability           None-fuming formula INCLUDES: One bottle of Pacer Foam Safe Kicker           One pump REQUIRES: Use with CA glues SPECS:    2oz (59.1ml)

139,-

På lager 7
KJØP
Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

På lager 4
KONTAKT
-7%
Hovedbilde E-Flite UMX Turbo Timber BNF Basic, 700mm Hovedbilde E-Flite UMX Turbo Timber BNF Basic, 700mm
E-Flite UMX Turbo Timber BNF Basic, 700mm
EVOLUTION OF AN ICON Scaled down from the legendary Timber® 1.5m, the E-flite® UMX™ Timber was the iconic ultra micro model best-equipped for exciting STOL (Short Take Off and Landing) adventures and beyond…until now. The UMX Turbo Timber updates the original design with a modern turboprop-styled nose and 3-blade propeller, plus a higher-power 3400Kv brushless motor. When using the same 2S 280mAh batteries, this Turbo version provides even better STOL performance with shorter takeoffs and faster climbs. You'll also enjoy extreme aerobatic capabilities and have the power to hover, then climb out vertically. In the hands of experienced pilots, the UMX Turbo Timber can be flown in more places — even off of water with the optional floats (sold separately) — and in smaller spaces. Plus its high-wing configuration and exclusive optional-use SAFE® Select technology provide plenty of stability to make the UMX Turbo Timber a great choice if you've mastered flying at least one model before. This makes it a model that pretty much every pilot, from low-time to long-time experienced alike, should own because everyone will enjoy flying it! Features Incredible Short Take Off and Landing (STOL) plus sport and aerobatic flight capabilities Uniquely capable and versatile so it can be flown in more places and smaller spaces More powerful 3400Kv motor for the power to hover and climb out vertically Updated turboprop-styled nose, 3-blade prop and trim scheme Updated landing gear design to secure fairings to fuselage Functional oversized flaps for shorter takeoffs and landings Industry-leading Spektrum™ 2.4GHz DSMX® technology Easy to fly with optional-use SAFE® Select flight envelope protection Unmatched stability and locked-in feel of AS3X® technology for smoother flight performance Optional-use leading edge slats for improved STOL and slow flight performance Functional and factory-installed LED landing, navigation and strobe lights Optional floats for flying from water (sold separately) Fully factory-assembled and ready to fly right out the box MORE POWER AND VERSATILITY At the heart of the iconic UMX™ Timber® model's evolution into the UMX Turbo Timber® is the addition of a 3400Kv motor and a 3-blade prop. Always known as and still an easy-to-fly, smooth handling, STOL (Short Take Off and Landing) capable airplane, it now has the thrust — with the same 2S 280mAh batteries — to hover and climb out vertically. It can also perform inverted flight, knife edge, snaps, spins and other advanced aerobatic maneuvers with ease. Functional oversized flaps, plus optional-use leading edge slats, offer improved STOL and slow flight performance. Equipped with oversized tundra-style wheels like its predecessor, the UMX Turbo Timber can take off and land on grass and other rough surfaces better than ever before due to the updated landing gear design that secures the fairings to the fuselage. Experienced pilots can fly it indoors in spaces as small as a single basketball court, and almost anyone who's mastered flying at least one other airplane before can fly it successfully outdoors in large yards, small parks, sports fields, at RC flying fields and many other places. Install the optional floats (sold separately) and you can add large pools, small ponds, and lakes to your flying site options. Included LED landing, navigation and simulated strobe lights add to the fun and make it possible to fly from earlier to even later in the day. Best of all the UMX Turbo Timber arrives 100% factory-assembled — and is ready to fly as soon as you bind the installed Spektrum™ receiver to your compatible transmitter! Needed to Complete Full-range 6+ channel Spektrum DSMX®/DSM2® compatible transmitter 2S 7.4V 200–280mAh LiPo with JST-PH Connector Compatible LiPo charger What's in the Box? (1) E-flite UMX Turbo Timber® with: (1) 3400Kv Brushless Motor (installed) (5) Linear Servos (installed) (1) Spektrum™ 6-Channel Receiver with brushless ESC (installed) (1) Product Manual Video Overview   More Power A more powerful 3400Kv motor and 3-blade prop deliver an abundance of power with popular 2S 280mAh batteries, including the thrust to hover and climb out vertically.   STOL (Short Take Off and Landing) Capable The UMX Turbo Timber's wing is designed with features like drooped wingtips, functional oversized flaps, and to accept optional-use leading edge slats (included) for improved slow flight and STOL performance. These features, along with the lightweight design and high-power brushless motor, make it possible to spring into the air or float down to land in less distance than any other similar class model.       Versatile Gear Options Fly off of surfaces that are impossible for most models of this size to handle: grass, gravel paths, dirt trails, paved surfaces — even pools, ponds and lakes using optional floats (sold separately). The updated landing gear has fairings that are secured to the fuselage and oversized, tundra-style wheels to soak up bumps and provide excellent prop clearance.   LED Lights Like the original UMX Timber, the UMX Turbo Timber comes with realistic-looking LED landing, navigation and simulated strobe lights that are factory-installed and powered from the flight battery.   Fully Factory-Assembled The UMX Turbo Timber arrives 100% factory-assembled and ready to fly right out of the box. It's equipped with industry-leading Spektrum® 2.4GHz technology that binds to your 6+ channel DSMX®/DSM2® equipped transmitter so you can be flying within minutes of opening the box.     Bind-N-Fly Completion Level Advantage Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly! This Bind-N-Fly Basic model is equipped with a Spektrum 2.4GHz DSMX® receiver featuring AS3X (Artificial Stabilization–3-aXis) technology that works behind the scenes to smooth out the effects of wind and turbulence. The result is a heightened sense of stability and precision that makes you feel like you're flying a much larger, expertly tuned aircraft. If this is your first model of its type, or you want an extra margin of safety while familiarizing yourself with the airplane, you can enable the optional-use SAFE® Select flight envelope protection technology built into the receiver. No programming is required. Simply change up the binding sequence as directed in the manual.   With SAFE Select enabled, you get: Pitch and Bank Angle Limits These envelope limits keep the airplane from rolling or pitching upside down. They also prevent excessive climb or dive angles. Automatic Self-Leveling The airplane instantly returns to and holds level flight when the sticks are released and in the center position. It's also helpful for keeping the wings level during takeoffs/launches and landings. Easy Switch Assignment—No Complex Programming Required The simple procedure for assigning a transmitter switch to turn SAFE Select features on and off doesn't require any complex programming and takes just a few seconds. If you don't want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver.

2.395,-

2.495,-

På lager 1
KJØP
-4%
Hovedbilde Zap Adhesives Zap-O Odorless CA+ Foam Safe Glue .7 oz
Zap Adhesives Zap-O Odorless CA+ Foam Safe Glue .7 oz
This is a 20 Gram Bottle of Zap-O Odorless CA+ Glue from Pacer. FEATURES: An odorless CA that really works!           Great on styrofoam and foam, without a primer.           Medium thick, slow cure.           Works on balsa, plywood and most other hobby materials.           No-more-tears formula.           Won't fog most clear plastics. INCLUDES: One 20 Gram Bottle of Zap-O Odorless CA+ Glue. SPECS:    20 Grams

179,-

189,-

** Ikke på lager
KJØP
-5%
Hovedbilde E-flite EFLUA1190 Float Set: UMX Carbon Cub SS, UMX ...
E-flite EFLUA1190 Float Set: UMX Carbon Cub SS, UMX ...
Float Set: UMX Carbon Cub SS, UMX Timber

239,-

389,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-39%
Hovedbilde Yeah Racing YA-0491 1/10 Tire Cover For 1.9 Crawler ... Hovedbilde Yeah Racing YA-0491 1/10 Tire Cover For 1.9 Crawler ...
Yeah Racing YA-0491 1/10 Tire Cover For 1.9 Crawler ...
Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels - Keep Calm Description: Add character to your crawler rig with our series of tire covers with a wide variety of smart and clever messages. White ink printed on tough synthetic leather to help deal with harsh conditions and for easy cleaning after trail runs.         Features: For: 1.9 inch sized wheels Material: Synthetic Leather   Includes: Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels 1pc

49,-

På lager 1
KJØP
Hovedbilde DynoMAX 9690 Charge Lead XT60 with 4mm banana ...
DynoMAX 9690 Charge Lead XT60 with 4mm banana ...
Charge Lead XT60 with 4mm banana connectors

109,-

** Ikke på lager
KJØP
Hovedbilde Titebond 5062 Original Wood Glue 118ml
Titebond 5062 Original Wood Glue 118ml
Titebond Original Wood Glue 118ml Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water. FEATURES: Fast set - Shortens clamp time Bonds stronger than wood Solvent-Resistant Excellent sandability Unaffected by finishes Easy cleanup with water APPLICATION GUIDELINES: Application temperature: Above 10°C Open assembly time: 4-6 minutes (21°C / 50%RH) Total assembly time: 10-15 minutes (21°C / 50%RH) Required clamping pressure: Enough to bring joints tightly together Method of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. Limitations: Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. PHYSICAL PROPERTIES: Type: Aliphatic resin emulsion Calculated VOC: 10.7 g/L State: Liquid Weight per litre: 1100g Color: Yellow Dried film: Translucent Flashpoint: > 93°C Solids: 46% Viscosity: 3,200 cps PH: 4.0 Storage life: 24 months in tightly closed containers at 24°C

89,-

** Ikke på lager
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png