Hopp til innhold
Hjem / Radio/Servo/Motor / Nitromotorer / Tilbehør nitromotorer / Du-Bro 340 Fuel Filter Medium
-9%

Du-Bro 340 Fuel Filter Medium

Art.nr: 13340

99,-

109,-

- 9%
DU-BRO

DU-BRO
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

INFORMATION

This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing.

 

 

  • This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing.

    INCLUDES
    • One Medium In-Line Fuel Filter

    REQUIREMENTS
    • 2.4 mm (3/32") id fuel tubing

    SPECIFICATIONS
    • Length: 28 mm

 

  • This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing.

    INCLUDES
    • One Medium In-Line Fuel Filter

    REQUIREMENTS
    • 2.4 mm (3/32") id fuel tubing

    SPECIFICATIONS
    • Length: 28 mm

INCLUDES

  • One Medium In-Line Fuel Filter


REQUIREMENTS

  • 2.4 mm (3/32") id fuel tubing


SPECIFICATIONS

  • Length: 28 mm
  • Width: 11 mm

Produsent

DU-BRO

DU-BRO

Kunder kjøpte også

Hovedbilde Du-Bro 677 Fuel Line Clips medium 4pcs
Du-Bro 677 Fuel Line Clips medium 4pcs
Du-Bro's Fuel Line Clips help prevent fuel tubing from coming off of fuel fittings for carbs, fuel filters, fuel tanks and more. Available in two sizes: 3/32" (2.3 mm) and 1/8" (3 mm). 4/pkg FEATURES Great for easy connections between fuel lines and fuel filters. INCLUDES Four 3/32" fuel line clips SPECIFICATIONS Inside diameter: 3/32" (Medium sized fuel tubing)

39,-

KJØP
Hovedbilde Futaba S-U400 Servo Standard 7.9kg/0.13s HV S.BUS2 ...
Futaba S-U400 Servo Standard 7.9kg/0.13s HV S.BUS2 ...
Futaba S-U400 Standard Servo HV S.BUS2 - Bulk Pack Features: Plastic Gears High Voltage S.BUS2 Will replace: S3010, S3152 & S3072HV Specs: Rated Voltage: 6-7.4V Operating Voltage: 4.8-8.4V Power @ 6.6V: 7.1kg/cm Speed @ 6.6V: 0.14s/60° Power @ 7.4V: 7.9kg/cm Speed @ 7.4V: 0.13s/60° Size: 40 x 20 x 36.1 mm Weight: 39g

399,-

429,-

KJØP
-7%
Hovedbilde OS 71608001 Glow Plug No.8 Hovedbilde OS 71608001 Glow Plug No.8
OS 71608001 Glow Plug No.8
Glow Plug No.8

99,-

KJØP
Hovedbilde Zap PT35 Z-Poxy 15 Minute 4oz Hovedbilde Zap PT35 Z-Poxy 15 Minute 4oz
Zap PT35 Z-Poxy 15 Minute 4oz
This is the 4oz Zap Z-Poxy 15 Minute Epoxy Resin from Pacer.     FEATURES Cures completely clear  Easy to sand and has excellent gap filling characteristics  Z-Poxy is specially formulated to bond to fiberglass, wood,  metals, and plastics  Resistant to shock and solvents  Non-brittle, non-shrinking  Produces a tough permanent bond in just 30 minutes   INCLUDES 2oz of 15 Minute Z-Poxy Resin  2oz of 15 Minute Z-Poxy Hardener   COMMENTS This product contains epoxy resin and polymercaptan hardener. In case  of skin contact, wash thoroughly with soap and water. In case of  contact with eyes, flush with water for 15 minutes. Call a  physician. If swallowed, seek medical advice immediately and show  container label. Use in well ventilated area. Keep out of the  reach of children.

239,-

KJØP
Hovedbilde Zap PT38 Adhesives Z-Poxy 5-Minute 8 oz
Zap PT38 Adhesives Z-Poxy 5-Minute 8 oz
Pacer's 5 Minute Z-Poxy is Resistant to Shock and Solvents, is Non-Brittle,          Easy to Sand and has Excellent Gap Filling Characteristics. FEATURES: Cures Completely Clear           Z-Poxy is Specially Formulated to Bond to Fiberglass, Wood,             Metals and Plastics. INCLUDES: 4oz of 5 Minute Z-Poxy Resin           4oz of 5 Minute Z-Poxy Hardener COMMENTS: The Total Working Time of this Glue is 3 Minutes and Fully Cures             in 5 Minutes.           This product contains Epoxy resin and Polyamide resin, some people             are allergic to these compounds.

369,-

KJØP
Hovedbilde Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz
Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz
   This is a 1oz Bottle of Zap-A-Gap CA+ Glue from Pacer.       Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Superior gap filling formula.           Medium viscosity.           Allows approximately 7-10 seconds for part positioning.           Average of 20 seconds curing.           Works on oily surfaces also.           Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Zap-A-Gap CA+ Glue. SPECS:    1oz (28.4g)

129,-

139,-

KJØP
-7%
Hovedbilde BSD B7004-A GLOW STARTER WITH METER & CHARGER – ... Hovedbilde BSD B7004-A GLOW STARTER WITH METER & CHARGER – ...
BSD B7004-A GLOW STARTER WITH METER & CHARGER – ...
Kvalitets gløder med lader, den har også ett analogt meter for å vise pluggens tilstand. Laderen lader med 350 mA, og lader gløderen opp på 5 timer.

329,-

399,-

KJØP
-18%
Hovedbilde Traxxas 3147X Fuel line (610mm or 2ft)
Traxxas 3147X Fuel line (610mm or 2ft)
  Fuel line (610mm or 2ft)

49,-

59,-

KJØP
-17%
Hovedbilde Absima 550CPS / 44WT Silicone Shock Oil 60ml
Absima 550CPS / 44WT Silicone Shock Oil 60ml
Høykvakitets Silicone demper olje med viskositet 550. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Hovedbilde Traxxas 3232X Super Duty Long Glow Plug
Traxxas 3232X Super Duty Long Glow Plug
This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

119,-

139,-

Ikke på lager
-14%
Hovedbilde Futaba 3PV 3-Channel FHSS System Hovedbilde Futaba 3PV 3-Channel FHSS System
Futaba 3PV 3-Channel FHSS System
Futaba T3PV 3+1 Channel FHSS, S-FHSS & T-FHSS* Radio Hold the 3PV in your hand, and instantly feel how lightweight it is. Access the programming menu on the easy-to-read screen, and see how sophisticated it is. Experience the 3PV's super-fast response rate, and realize that you're in command of the system that can make a real difference on race day. You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C's most versatile surface system. The 3PV is available with a high-voltage R203GF receiver that's an ideal match for brushless ESCs and digital servos. T3PV Features: System: FHSS, S-FHSS & T-FHSS 2.4GHZ (T-FHSS / Telemetry only available with the optional R304SB receiver) 3+1 Channels (the 4:th channel can only be used when 4WS mixing (crawlers) or Brake mixing and with a 4-channel receiver) Channel 3 can be used on SW1 (two endpoints) or at DT3 where the D/R normally is at (stepped function) 10 Model Memory 4-Character Model Name Sub-Trim (CH1-4) Channel-4 Trim (only visible if 4WS or Brake Mixing is activated) Steering Dual Rates (D/R) Steering End Point Adjustement (EPA-CH1) Throttle End Point Adjustement (EPA-CH2) Channel-3 End Point Adjustement (EPA-CH3) Channel-4 End Point Adjustement (EPA-CH4) - this is only displayed when 4WS or Brake Mixing is activated 4-Wheel-Steering / Brake Mixing (SMX) (booth mixers can't be used at the same time) Sero Reverse (CH1-4) Steering Exponential (EXP-CH1) Throttle Exponential (EXP-CH2) Throttle Fail-Safe (F/S) ABS Brakes (3- cycle speeds available) Model Data Copy Auto Power-Off after 10 minutes Low Battery Alarm: 4x AA alkaline batteries - set LBA @ 4.2V 5 cell (6V) NiMH - set LBA @ 5.0V 2S (6.6V) LiFe - set LBA @ 5.8V Available T-FHSS Telemetry Functions when using the R304SB receiver (not included): Receiver battery voltage (no sensor needed) External voltage (if this sensor is used the receiver battery voltage is not visible on the TX LCD) - SBS-01V No other telemetry sensors can be used Suitable Receivers: R203GF S-FHSS (included) R304SB T-FHSS (optional) - Use only Futaba Digital & BLS servos Optional TX Batteries: 4x AA alkaline batteries (battery holder included) YT1800A (5 Cell NiMH) HT5F1800B / FPEBA0142 (5 Cell NiMH) FT2F1700B / FPEBA0140 (2S 6.6V LiFe) FT2F2100B / FPEBA0135 (2S 6.6V LiFe) T3PV-2.4G Transmitter: FHSS/S-FHSS/T-FHSS* system Wheel type 3+1 channels (the 4th channel is used for mixing functions only) Transmitting frequency: 2.4GHz band Power requirement: Size AA Dry cell battery x 4 (6V) (or 5-cell NiMH / 2-cell LiFe) Current drain: 100mA or less Transmission antenna: 1/2λ di-pole (Built-in) Receiver R203GF (included): 3 channels S-FHSS/FHSS auto detection system Power requirement: 4.8V ~7.4V battery (Dry cell battery cannot be used) Size: 39 x 26 x 10 mm (excluding a projection part) Weight: 8 g Receiver R304SB/R314SB (optional): T-FHSS system 4 channels Power requirement: 4.8V ~7.4V battery (Dry cell battery cannot be used.) Size: 35.1 x 23.2 x 8.5 mm (excluding a projection part) Weight: 6.6 g Steering, Throttle and Steering Dual Rate digital trims are conveniently positioned around the wheel for easy access. The nearby switch is for programming 3rd channel functions if needed. The large screen makes it easy to view information from the 3PV's intuitive menu. The battery compartment is accessed through the transmitter's base, and can hold 4 "AA" alkaline batteries, NiMHs (such as the Yuntong #YT1800A) or a LiFe pack (such as the Futaba #FPEBA0140).

1.695,-

1.895,-

KJØP
-11%
Hovedbilde Traxxas 5262 Air Filter Pre-Filter Foam Inserts (3)
Traxxas 5262 Air Filter Pre-Filter Foam Inserts (3)
This is a package of three Air Filter/Pre-Filter Foam Inserts  for the Traxxas .20 cu in (3.3cc) racing engine.   FEATURES Constructed of foam and pre-oiled to trap dirt  Pre-Filter for extra filtration   INCLUDES Three Air FIlter Inserts for the Traxxas 3.3 engine   REQUIREMENTS Installing in air filter boot on engine     SPECIFICATIONS  Height: 38mm (1.5")  Diameter: 38mm (1.5")

129,-

139,-

KJØP
-7%
Hovedbilde Hitec 57344 Servo Extension 6
Hitec 57344 Servo Extension 6"
Hitec 57344 Servo Extension 6"  This is a 6" Servo Extension by Hitec. FEATURES:            This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Installation SPECS:    Length: 6" (152mm) COMMENTS:                            Wire color code: Hitec-                            Black:  negative                            Red:    positive                            Yellow: signal

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 5759 Water Cooling Tubing 1m Spartan
Traxxas 5759 Water Cooling Tubing 1m Spartan
 This is a package of Water Cooling Tubing for the Traxxas Spartan. FEATURES: Silicone construction, blue in color INCLUDES: One 3' length of fuel tubing SPECS:    Inside diameter:  .101" (2.5mm)           Outside diameter: .212" (5.5mm)           Length: 1m (39")

69,-

KJØP
Hovedbilde Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx
Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx
This is the Glow Plug Lead Wire for the T-Maxx Truck Kit.    This wire that is attached to the glow plug that heats it while starting. FEATURES: This is a blue silicone wire.           It has one bullet connector soldered on one end of wire. INCLUDES: One blue glow plug lead wire with bullet connector. COMMENTS: Designed for use only with the EZ Start System.

29,-

KJØP
Hovedbilde Traxxas 5228 Head Protector Cooling Head TRX 3.3
Traxxas 5228 Head Protector Cooling Head TRX 3.3
                      This is the Cooling Head Protector                for the Traxxas TRX 3.3 Racing Engine. FEATURES: Constructed of plastic, black in color INCLUDES: Cooling Head Protector and five 3x6mm screws REQUIRES: Fastening to top of cooling head SPECS:    Thickness: 0.18" (4.5mm)           Diameter: 1.7" (43mm)

39,-

KJØP
Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

KJØP
-10%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png