Hopp til innhold

Verktøy/Lakk/Lim

Art.nr: DMC1017
Copied
Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 42 centimeters or 16.5 inches Length: 42 centimeters or 16.5 inches

419,-

** Ikke på lager
KJØP
Art.nr: DMC1019
Copied
Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 50cm or 19.7 inches Length: 50cm or 19.7 inches

499,-

På lager 1
KJØP
Art.nr: DMC2011
Copied
 Arrma Kraton/Talion protection cover (shock covers not included) Fits: Arrma Kraton/Talion only. Scale: 1/8

349,-

** Ikke på lager
KJØP
Art.nr: DMC0011
Copied
Dusty Motors Dust Protection Cover for Traxxas E-revo & Summit - Black DMC0011 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

** Ikke på lager
KJØP
Art.nr: DMC0021
Copied
Dusty Motors Dust Protection Cover for Traxxas E-Maxx - Black DMC0021 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

349,-

På lager 2
KJØP
Art.nr: DMC0041
Copied
Denne passer på 1/16 E-revo, 1/16 Summit, 1/16 Rally.   This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one. Black in color.

319,-

349,-

På lager 1
KJØP
-9%
Art.nr: DMC2031
Copied
Dust Protection Cover for Arrma Senton 6S, black  

399,-

429,-

På lager 1
KJØP
-7%
Art.nr: TRX0211
Copied
Dusty Motors Protection Cover for Raptor R 4x4 Dusty Motors beskyttelsestrekk i svart for Traxxas Raptor R 4x4. Beskyttelsestrekk til demperne følger ikke med. PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   Dusty Motors beskyttelsestrekk er laget for å holde innsiden av din radiostyrte bil så ren som mulig. Utrustet med glidelås for enkel tilgang til elektronikken. Product details in english This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.   Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process). Let the VELCRO tape adhere to the chassis for 24 hours before you use the shroud. If it?s hot outside, leave the Dusty Motors? shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris. When it?s hot outside ? or if you have a car gearing set up that?s capable of reaching the speed of light ? be smart when you bash. Don?t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature. When bashing in winter, don?t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics. Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can?t be breathable and 100 percent waterproof at the same time. Physics just doesn?t work that way. The splashes of water are OK, so don?t be concerned if the shroud gets a bit damp. Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer

489,-

519,-

På lager 1
KJØP
-6%
Art.nr: TRX0231
Copied
Dusty Motors beskyttelsestrekk for Traxxas ST Rally og Jato 4x4. Dusty Motors beskyttelsestrekk er laget for å holde innsiden av din radiostyrte bil så ren som mulig. Utrustet med glidelås for enkel tilgang til elektronikken.

499,-

På lager 3
KJØP
Art.nr: DMC0191
Copied
Dusty Motors Protection Cover for Traxxas Wide Maxx Black(shock covers not included)

399,-

449,-

** Ikke på lager
KJØP
-11%
Art.nr: Dusty Motors
Copied
Dusty Motors beskyttelsesstrømpe til å tre over støtdempere. Holder til 4-8 dempere, avhengig av størrelse. Kommer i en lang remse.

89,-

** Ikke på lager
KJØP
Art.nr: UNI0041
Copied
Protection Cover Universal Medium+ Dusty Motors justerbart beskyttelsestrekk i svart i medium+ størrelse. Passer karrosserilengder på 29-31cm. Dusty Motors beskyttelsestrekk er laget for å holde innsiden av din radiostyrte bil så ren som mulig. Utrustet med glidelås for enkel tilgang til elektronikken.   Product details in english Universal Shroud Cover This is a high quality, hand made, dust and water splash proof shroud, designated to fit a various different RC models by those manufacturers: HPI, Kyosho, Team Associated, LOSI, Tamiya, Traxxas, Thunder Tiger, Ofna, Tekno, Mugen, XRay, Axial and etc. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a brake between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good air flow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. Two included lengths of a cover will be enough for 8-16 shock absorbers, depending on a length of one. How to choose a right universal adjustable shroud: 1. Check a chassis of your model for the spots to glue a Hook & Loop Fastener tape. For the best result Hook & Loop Fastener should be applied to a vertical sides of a chassis. Glued Hook & Loop Fastener should cover all length of chassis, from a front shock tower to a rear one, i.e. shroud side should cover all chassis side. 2. Measure the length of one side of chassis. According to a measurement results choose one of six sizes of universal shrouds.   Shroud comes with a zipper Adjustable front ant back Six different sizes For models from 1/16 up to 1/8 scale Genuine adhesive Hook & Loop Fastener® tape included Shock absorber cover included Hand made with a very strict quality inspection Easy installation MADE IN EUROPE   Before applying Hook & Loop Fastener® to the chassis, cut the tape to the necessary length and width. For example, to place Hook & Loop Fastener® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width. Make sure that the surface of the chassis is extremely dry and clean before applying the Hook & Loop Fastener® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process). Let the Hook & Loop Fastener® tape adhere to the chassis for 24 hours before you use the shroud. If it's hot outside, leave the Dusty Motors shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris. When it's hot outside or if you have a car gearing set up that's capable of reaching the speed of light, be smart when you bash. Don't let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature. When bashing in winter, don't bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics. Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can?t be breathable and 100 percent waterproof at the same time. Physics just doesn't work that way. The splashes of water are OK, so don't be concerned if the shroud gets a bit damp. Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.

399,-

419,-

På lager 1
KJØP
-5%
Art.nr: VEL0003
Copied
Dusty Motors tape med borrelås til å feste Protection cover. 3 meters lengde, 16mm bredde.

75,-

85,-

** Ikke på lager
KJØP
-12%
Art.nr: 16001
Copied
  K1 Knife comes replaceable super sharp #11 blades and a snug fitting safety cap Precision knife with special screw for extra blade security and stabilization Used on: paper, cardstock, stencils, film, photographs, tape, plastic, wood, cloth, leather, cardboard, cricut, cork, vinyl, foam boards and most other light-weight crafting Used for: cutting art, model making, crafting, car wrapping, vinyl work, carving pumpkins, quilling Used by : graphic designers, hobbyists, scrapbookers, quillers, and crafters and general purpose Includes (1) K1 Aluminum Knife with (1) #11 Blade, .31 x 4.75 in - .8 x 12 cm K1 Aluminum Knife fits with Excel Blades # 5 / 6 / 10 / 11 / 12 / 13 / 16 / 17 / 17A / 21  

59,-

** Ikke på lager
KJØP
Art.nr: 16002
Copied
K2 MEDIUM DUTY ALUMINUM KNIFE DETAILS Excel Blades - K2 Medium Duty Aluminum Handle 16002 K2 Aluminum Knife with replaceable super sharp #24 blade Equipped with a 4 jaw aluminum chuck for extra blade security and stabilization Used on: paper, cardstock, stencils, film, photographs, tape, plastic, wood, cloth, leather, cardboard, cork, vinyl, foam boards and most other medium-weight crafting Used for: model making, crafting, car wrapping, vinyl work, carving pumpkins, wood and more Used by : graphic designers, hobbyists, scrap bookers, quillers, architectures, crafters and general purpose Fits with: Excel Blades #2, #18, #19, #19A,  #22, #23, #24, #26, #27, & #28 and 20710, 20720, 20730 & 20740 routers Includes (1) K2 Aluminum handle with (1) #24 Blade, .438 x 4.75 in – 1.1 x 12.1 cm Made in the USA  

49,-

På lager 4
KJØP
Art.nr: 16005
Copied
Excel 16005 K5 Plastic Heavy Duty Knife K5 Red handle HD DETAILS Excel Blades - K5 Heavy Duty Knife #16005 Plastic hexagonal handle Equipped with a durable thick machined aluminum shaft Includes 4 jaw aluminum chuck for more secure blade positioning Shatter resistant safety cap to protect blade during storage Comes with a sharp angled #19 blade Can hold most blades, carving blades, routers, and fine saw blades  Used with : wood, leather, paper, cork, card-stock, stencils, film, photographs, tape, plastic, cardboard, foam boards and most other heavy-weight crafting.  Used by: graphic artists, designers, hobbyists, scrapbook artists, stamp artists, wood carvers and crafters. Fits: Excel Blades #2, #18, #19, #19A, #22, #23, #24, #26, #27, & #28 Fits: Excel Routers 20710, 20720, 20730 & 20740 routers Includes (1) K5 Plastic handle with (1) #19 Blade, .875 x 4.75 in – 2.2 x 12.1 cm Made in the USA

89,-

På lager 4
KJØP
Art.nr: 16010
Copied
Excel 16010 K10 Light Flat Plastic Snap Knife DETAILS Excel Blades - K10 Small Snap Blade Knife with 9MM Blade 16010 Equipped with a slim plastic body Includes Excel Blades' #3 13-point snap blade (9mm) Retractable Blade Includes push lock for safety This economical knife works great for almost any light duty task or project.  When the blade gets dull, simply snap off the tip revealing a new sharp blade. Perfect for cutting cardboard packages, paper, plastic, canvas, cloth, film, model making, pumpkin carving, card-stock, foam boards, tape, wood, polymer clay, vinyl, cork and other light-weight materials.  Used by homeowners, contractors, warehouse staff and can be found in most garages. 

39,-

På lager 1
KJØP
Art.nr: 16013
Copied
Excel 16013 - K13 HEAVY DUTY 18MM LARGE SNAP BLADE Equipped with a slim plastic body Includes Excel Blades' #7 8 point snap blade (18mm) Blade is Retractable Includes push lock for safety This economical knife works great for almost any heavy duty task or project.  When the blade gets dull, simply snap off the tip revealing a new sharp blade. Perfect for cutting cardboard packages, paper, plastic, canvas, cloth, film, model making, pumpkin carving, card-stock, foam boards, tape, wood, polymer clay, vinyl, cork and other light-weight materials.  Used by homeowners, contractors, warehouse staff and can be found in most garages. 

59,-

På lager 1
KJØP
Art.nr: 16018
Copied
EXCEL 16018 EXCEL K18 SOFT GRIP KNIFE NON ROLL WITH SAFETY CAP Features include comfortable soft grip handle, 4 jaw machined aluminum chuck for secure blade positioning, super sharp #11 blade, and a convenient rear blade release. Available in 6 colors. .375 x 5in - .9 x 12.7cm. Note: Only 1 knife is included.

169,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Art.nr: 16020
Copied
Excel 16020 K18 Black Cushion Grip-on Knife  DETAILS Excel Blades - K18 Grip-on Knife Excel Blades' favorite paper cutter!  K18 Cushion grip knife comes with #11 double honed blade Precision knife with special screw for extra blade security and stabilization Excel Blades K18 knife is available in black, blue, green, grey, red and purple.  Used for: precision paper cutting, trimming card-stock and rubber, stripping of paper Use with: foam, plastic, wood, cloth, film, polymer clay, cork, clay carving, pumpkin carving.  Used by: graphic artists, designers, hobbyists, scrapbook artists and crafters Grip-On Knife fits with Excel Blades #5, #6, #10, #11, #12, #13, #16, #17, #17A and #21. .375 x 5 in - .9 x 12.7 cm Made in the USA

69,-

På lager 2
KJØP
Art.nr: 20002
Copied
Super Sharp #2 Knife Blade 5pcs DETAILS Excel Blades - #2 Straight Edge Replacement Blade 20002 Made from carbon steel Comes in packs of: 5 / 100 / 1000 These Sharp Straight Edge Blades are the perfect blade for cutting and trimming thicker materials. This versatile replacement blade fits with all standard medium to heavy duty craft knives including the Xacto Knife. Used with: matte board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more. Used for: trimming, cutting, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay, and more. Used by: hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with: K2 / K5 / K6 L – 1.880/ H – 0.400 / E - 1.100/ S – 0.345/ T – 0.025 Made in the USA

49,-

** Ikke på lager
KJØP
Art.nr: 20003
Copied
Excel 20003 9MM 13-Point Snap Blade DETAILS Excel Blades - 9mm Snap Blade  20003 Equipped with a 13 point snap When the blade gets dull, simply snap off the tip revealing a new sharp blade. Coated with a thin layer of oil for rust protection.  Used for: cutting cardboard packages, paper, plastic, canvas, cloth, film, model making, pumpkin carving, card-stock, foam boards, tape, wood, polymer clay, vinyl, cork and other light-weight materials. Used by:  hobbyist, scrapbook artists, architects, paper artists, graphic artists, designers, crafters, homeowners, contractors and can be found in most garages.  Fits with Excel Blades K10, K14, K70, K73 & K810 Handles Available in packs of 5 and 100 L – 3.183/ H – 0.314/ E – 3.183/ T – 0.015 Made in the USA

59,-

På lager 7
KJØP
Art.nr: 20005
Copied
Excel 20005  #5 Angled Chisel Blade - 5 PCS DETAILS #5 Angled Chisel Replacement Blade 20005 #5 Large Chisel Blade - Replacement Blades Carbon Steel Available in 5 pack Used for: remove layers, shape materials and light chiseling. The large chisel blade gives you the ultimate precision that allows you to make a more skillful cut than your traditional chisel blade.  We coat the blade with a thin layer of oil for rust protection.  This versatile replacement blade fits with all standard light duty xacto style knives Used with: board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more.  This blade is used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with Excel Blades Handle K1, K3, K17, K18, K26 & K30 handles L – 1.880/ H – 0.400 / E - 1.100/ S – 0.250/ T – 0.020 Made in the USA   

35,-

** Ikke på lager
KJØP
Art.nr: 20010
Copied
#10 CURVED EDGE BLADE DETAILS Excel Blades #10 Curved Edge Replacement Blade 20010 #10 Curved Edge Blade - Replacement Blades Carbon Steel Available in packs of: 5,15, 100, 1000  Razor-sharp, curved edge for added maneuverability The large chisel blade gives you the ultimate precision that allows you to make a more skillful cut than your traditional chisel blade.  We coat the blade with a thin layer of oil for rust protection.  This versatile replacement blade fits with all standard light duty xacto style knives Used with: board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more.  This blade is used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with Excel Blades Handle K1, K3, K17, K18, K26 & K30 handles L – 1.520/ H – 0.335/ E – 1.081/ S – 0.250/ T – 0.020 Made in the USA 

45,-

På lager 1
KJØP
Art.nr: 20011
Copied
Knife Blade #11 (5) DETAILS #11 Blades, #11 Double Honed Replacement Blade Excel #11 Blades' most popular blade! Made from carbon steel, #11 Blades Available in packs of 5, 15, 100, 500, 1000 The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip.  This versatile replacement blade fits with all standard light and medium duty Xacto style knives. Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting.  Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay. Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters. Fits with: K1, K3, K17, K18, K26, K30, & K71 handles L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020 Made in the USA 

39,-

** Ikke på lager
KJØP
Art.nr: 20017
Copied
Excel 20017 Small Wood Chisel Knife Blade #17 (5) DETAILS Chisel Blade Excel Blades - #17 Small Chisel Replacement Blade Made from carbon steel Available in packs of 5, 15, 100, 1000 Used for: remove layers, shape materials and light chiseling Large chisel blade gives you the ultimate precision that allows you to make a more skillful cut than your traditional chisel blade This versatile replacement blade fits with all standard light and medium duty xacto style knives, chisel blade. Used with: matte board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more Used for: model making, paper cutting, cake decorating, and polymere clay. Used by graphic artists, architects, clay artists, wood carvers, designers, hobbyists, scrapbook artists and crafters. Fits with: K1, K3, K17, K18, K26, K30, & K71 handles L – 1.500/ H – 0.350 / E - 0.350/ S – 0.250/ T – 0.020 Made in the USA

49,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Art.nr: 20018
Copied
Knifeblade #18 Large Chisel (5) DETAILS Excel Blades - #18 Large Chisel Replacement Blade 20018 #18 Large Chisel Blade - Replacement Blades Straight Edge Chisel Carbon Steel Available in packs of 5, 100, 1000 Used for: remove layers, shape materials and light chiseling. This versatile replacement blade fits with all standard light duty xacto style knives Used with: board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more.  Used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with Excel Blades K2, K5 &K6 L – 1.800/ H – 0.500 / E - 0.500/ S – 0.345/ T – 0.025 Made in the USA   KNIFE COMPATIBILITY This knife is best utilized for the following: Precision cutting, trimming, and stripping of paper, Foamcore plastic, Wood, Cloth, Film, Model making, Clay carving, and Pumpkin carving.

49,-

På lager 3
KJØP
Art.nr: 20022
Copied
Excel 20022 Knife Blade #22 Curved (5) DETAILS Excel Blades - #22 Curved Edge Replacement Blade   #22 Curved Edge Blade - Replacement Blades Carbon Steel Available in packs of: 5, 100, 1000  Razor-sharp, curved edge for added maneuverability The large curved edge blade gives you the ultimate precision that allows you to make a more skillful cut than your traditional blade.  Blade coated with a thin layer of oil for rust protection.  This versatile replacement blade fits with all standard medium to light duty xacto style knives Used with: board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more.  This blade is used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with Excel Blades Handle K2, K5. K6 handles L – 1.820/ H – 0.412/ E – 1.304/ S – 0.345/ T – 0.025 Made in the USA 

45,-

** Ikke på lager
KJØP
Art.nr: 20023
Copied
Double Edge Knife Blade #23 (5) DETAILS Excel Blades - #23 Double Edge Replacement Blade 20023 Durable high carbon steel blade Available in a pack of 5, 100, 1000 Steel curved double edge This versatile replacement blade fits with all medium duty xacto style knives. Used for: creating smooth edge lines in grout or caulk Used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with:  K2, K5 & K6 Handles  L – 1.770/ H – 0.393/ E – 2.240/ S – 0.345/ T – 0.025 Made in the USA

59,-

På lager 2
KJØP
Art.nr: 20026
Copied
Whittling Knife Blade #26 75mm (5) DETAILS Excel Blades - #26 Whittling Replacement Blade 20026  Durable high carbon steel blade Available in a pack of 5 3" long, heavy duty whittling blade This versatile replacement blade fits with all medium duty xacto style knives. Used by hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters.  Fits with:  K2, K5 & K6 Handles  L – 3.100/ H – 0.430 / E - 2.290/ S – 0.345/ T – 0.025  Made in the USA

79,-

På lager 3
KJØP
Art.nr: 20027
Copied
Knife Saw Blade #27 (5) DETAILS Blade 27, #27 Replacement Saw Blade 20027  Durable high carbon steel blade Available in a pack of 5 3" long, medium duty saw blade  This versatile replacement blade fits with all medium duty xacto style knives. Used for: brass tube, solid rod stock, plastic, wood, soft or thin metals, balsa wood, forge world resin, cork, foam, card-stock, pumpkin carving and most other medium to heavy duty  Fits with:  K2, K5 & K6 Handles  L – 3.130/ H – 0.310/ E – 2.455/ S – 0.130/ T – 0.025/ TPI – 15  Made in the USA KNIFE COMPATIBILITY This knife is best utilized for the following: Precision cutting, trimming, and stripping of paper, Foamcore plastic, Wood, Cloth, Film, Model making, Clay carving, and Pumpkin carving.

79,-

På lager 3
KJØP
Art.nr: 20028
Copied
Excel 20028 Concave Carving Knife Blade #28 Blade (5) DETAILS Excel Blades - #28 Concave Carving Replacement Blade 20028 Made from carbon steel Comes in packs of: 5 / 100 / 1000 A mainstay in any professional DIY kit, these indispensable tools of the trade are your new go to for whittling, carving and the initial shaping of a variety of different materials. This versatile replacement blade fits with all standard medium to heavy duty craft knives including the Xacto Knife. Used with: matte board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay and more. Used for: shaping, trimming, shaving, cutting, and chiseling matte board, linoleum, foam core, plastic, cardboard, plaster cast, cork, metal, stone, wood, balsa wood, rubber, wax, clay, and more. Used by: hobbyist, wood carvers, metal workers, stone masonry, architects, costume designers, crafters, contractors, designers, and carpenters. Fits with: K2 / K5 / K6 L – 1.780/ H – 0.440 / E - 1.082 / S – 0.345 / T – 0.025 Made in the USA

95,-

På lager 1
KJØP
Art.nr: 20059
Copied
Excel 20059 Dual Blade Strip Cutter Replacement Blade #59 DETAILS Excel Blades - Dual Blade Strip Cutter Replacement Blade  Excel Blades #59 Dual Cutter Blades are sharp carbon steel Available in packs of 2 and 100 The width of the #59 blades can be adjusted on the Excel Blades Dual Strip Cutter from .12" - . 63". Use with: paper, leather, vinyl, foam core, plastic, cork, fondant, gum paste, wood, cloth, clay carving, polymer clay, vehicle vinyl wrap, and most other light-weight crafting supplies.  Used by: graphic artists, quillers, designers, hobbyists, scrapbook artists, crafters, and car wrappers. The #59 Dual Flex Cutter Blades are compatible with the following handle only: #70031 Made in the USA

39,-

På lager 1
KJØP
Art.nr: 20064
Copied
360° Swivel Blade #64 for K4 (2) DETAILS Excel Blades - #64 Replacement Swivel Blade High quality #64 rotating swivel blades Made for cutting circles  Used on: film, paper, stencils, decals, and more Perfect tool for graphic artists, designers, hobbyists, and arts and crafts applications Fits with: K4 knife Includes a pack of two (2) #64 blades 0.812 x 0.125 x 0.125 edge Made in the USA KNIFE COMPATIBILITY This knife is best utilized for the following: Precision cutting, trimming, and stripping of paper, Foamcore plastic, Wood, Cloth, Film, Model making, Clay carving, and Pumpkin carving.

39,-

På lager 5
KJØP
Art.nr: 30470
Copied
EXCEL PULL SAW BLADE - 1 1/2" DEEP - 30 TEETH/IN Hardened serrated steel blade with soft backer. For use on plastic, wood, and soft metals.   1.5 x 5 x .012in 30 Teeth/Inch 3.8 x 12.7 x .03cm 11.8 Teeth/cm Fits the K2, K5, and K6 Excel Handles Carded 1 1/2" Deep

79,-

** Ikke på lager
KJØP
Art.nr: 30480
Copied
EXCEL PULL SAW BLADE - 2" DEEP - 16 TEETH/IN Hardened serrated steel blade with soft backer. For use on plastic, wood, and soft metals.   2 x 5 x .018in 16 Teeth/Inch 5.1 x 12.7 x .045 cm 6.3 Teeth/cm Carded 2" Deep Fits the K2, K5, and K6 Excel Handles

79,-

** Ikke på lager
KJØP
Art.nr: 30490
Copied
EXCEL PULL SAW BLADE - 1 1/4" DEEP - 46 TEETH/IN Hardened serrated steel blade with soft backer. For use on plastic, wood and soft metals.   1.25 x 5.00 x .012in 46 Teeth/Inch 3.1 x 12.7 x .03 cm 18.1 Teeth/cm  Fits the K2, K5, and K6 Excel Handles

69,-

På lager 1
KJØP
Art.nr: EX44287
Copied
Excel's large box series - All of your favorite tools in one convenient set.  Set comes in a molded plastic case and includes one (1) K1 Light Duty Knife, one (1) K10 Snap Blade Knife, one (1) Needle Nose Plier with Side Cutters, one (1) Sharp Pointed Tweezers, one (1) Curved Pointed Tweezers, one (1) Swivel Head Screwdriver, one (1) Large Plastic Clamp, one (1) Small Plastic Clamp, two (2) Needle Files, one (1) Sanding Stick and three (3) assorted blades.  Each knife within our kit includes a 4 jaw aluminum chuck for a more secure blade positioning and hold than your standard hobby knife; with a snug fitting, shatter resistant safety cap to protect blade during storage Perfect gift idea for hobbyists, artists, designers, or those with interest in arts and crafts applications – wood carving, scrapbooking, model kits, and more.

799,-

På lager 2
KJØP
Art.nr: 44290
Copied
Knife set Pro. wooden case DETAILS Excel Blades – Professional Set 44390 Includes (1) Excel Blades K1 Aluminum Knife with 4 jaw aluminum chuck for secure blade positioning and twist lock shatter resistant safety cap Includes (1) Excel Blades K2 Medium Duty Aluminum Knife with special fitted screw for blade security and stabilization Includes (1) Excel Blades K7 Carving Knife with roll resistant handle and ergonomic handle Includes Excel Blades (1) of each blade -  # 2/ 10/ 11/ 17/ 18/ 19 / 24/ 20104 Includes Excel Blades (1) of each gouge - 20310/ 20350 Encased in a simple wooden case (with a clasp lock) for storage and protection.  Used for: wood carving, scrap booking, paper cutting, cake decorating, model making, sculpting, polymer clay and trimming leather, cardboard, foam board, linoleum and more.  Used by: hobbyists, artists, designer, scrapbook artists and crafters.  Made in the USA    Contains: K1 Knife K2 Knife K7 Knive 11x assorted blades 2x gouges

469,-

På lager 1
KJØP
Art.nr: 44291
Copied
Deluxe Ship Modelers Tool Set DETAILS Excel Blades – Deluxe Ship Modelers Set 44291 Made in the USA Excel Blades’ Deluxe Ship Modelers Set (44291) is a one of kind necessity to artists in all levels. This collection is encased within a simple yet stunning wooden case (with a clasp lock) that truly protects your tools for years to come. The Hobby Knife Set includes knife handles that house a 4 jaw aluminum chuck for more secure blade positioning and hold than your standard light duty knife; with a snug fitting, twist lock shatter resistant safety cap to protect blade during storage.  Perfect gift idea for hobbyists, artists, designers, or those with interest in arts and crafts applications – wood carving, model kits, and more!   Contains: K1 Aluminum Craft Knife K2  Medium Duty Hobby Knife K5 Heavy Duty Plastic Handle Knife 1 Needle Nose Pliers With Side Cutter 1 Needle Point Awl  1 Sharp Pointed Tweezers 1 Mitre Box   1 Razor Saw   1 Sanding Block   4 Asst. Gouges 16 Asst. Blades   3 Assorted Drills

849,-

899,-

På lager 1
KJØP
-6%
Art.nr: 55001
Copied
Razor Saw Set DETAILS Excel Blades - K5 Handle + Saw Blade 55001 Razor Saw Set includes K5 Heavy Duty Hobby knife handle, a 5" steel pull saw blade with 46 teeth per inch Used for: cutting wood, soft metals Used with: wood, plastic, metals Used by: hobbyist, wood workers Made in the USA Looking to expand your tool arsenal? Try our Razor Saw Set. It is ideal for hobbyists and wood workers and noted as an indispensable tool of the trade. The hobby razor saw is engineered using high quality aluminum and steel for strength. It is known for its durability and is rated as an excellent professional tool. At Excel Blades our razor saw set is made in the USA and is the ideal DIY tool for men and women alike. It includes our K5 Heavy Duty Hobby knife handle and a 5" steel pull razor saw blade which has 46 teeth per inch. This tool is ideal for cutting wood, soft metals and is often used with plastic. If you are a home DIYer you will be pulled in by all the benefits that this razor saw has to offer. Razor Saw PROS: • Less energy needed for cutting  • Quicker cutting than many handsaws  • More flexibility  • Heavy duty handle  • Replaceable saw blades  Eliminates the need for sharpening dull or damaged blades Our Razor saw set is very versatile which has a great deal to do with their thinner blades, they are great for DIY projects around the home. It is the season for crafting and Excel Blades’ razor saw set is sure to assist with any DIYs you have up your sleeve.

179,-

199,-

På lager 1
KJØP
-10%
Art.nr: 55665
Copied
Excel 55665 - Miter Box Only w/ 45 Deg. Angle DETAILS Excel Blades - Mitre Box  55665 Metal 6 inch hand powered Excel Mitre Box Professional tool quality and ideal for hobbyists and wood workers and noted as an indispensable tool of the trade is engineered using high quality aluminum and steel for strength and durability. Features slots for two cutting angles at 45-degree and 90-degree. Used for: precisely cutting wood, plastic and metals Mitre Box can be purchased as a set Made in the USA

195,-

På lager 1
KJØP
Art.nr: 55670
Copied
RAZOR SAW SET WITH K5 HANDLE AND 2 BLADES DETAILS Excel Blades - K5 Handle + 2 Saw Blade 55670 Razor Saw Set includes heavy duty K5 hobby knife handle and two a 5" steel pull saw blade Saw Blades: (1) 1.25 X 5.00 X .012 Inches - 46 Teeth per Inch. (1) 1.25 X 5.00 X .012 Inches - 24 Teeth per Inch Fits the K2, K2, and K6 Excel Handles. Used for: cutting wood, soft metals Used with: wood, plastic, metals Used by: hobbyist, wood workers Made in the USA

229,-

249,-

** Ikke på lager
KJØP
-8%
Art.nr: 56002
Copied
Excel 56002 - Mini Swivel Bench Vise, 1 1/2" Double honed carbon steel blade – we hold all of our products to the Excel standard, with a rigorous look into quality of materials, hardness, and edge. That means when you use a product from Excel with a blade, you know that you are getting the most effective blade on the market.

599,-

På lager 1
KJØP
Art.nr: 60030
Copied
Self-Healing Cutting Mat 216x305mm (Transparent) DETAILS Excel Blades - 8.5" X 12" CUTTING MAT The Excel Blades Self-Healing Mat is a must-have accessory for hobbyists and designers who frequently use cutting tools. 8.5" x 12" in size Available in Black, Blue, Clear, Purple and Green Features a one-inch grid pattern for accurate cutting and trimming These cutting mats feature a surface material that absorbs cuts from a sharp Excel Blades knife. The cutting mat reserves the surfaces around your work space and protects it from sharp tools creating damage to the area.  Phthalate free Made from PVC

149,-

På lager 3
KJØP
Art.nr: 70031
Copied
Excel 70031 Dual Blade Strip Cutter DETAILS Excel Blades -  Dual Blade Strip Cutter 70031 Adjustable Width Strip Cutter Easily cuts strips to your needed size  Equipped with (2) adjustable parallel #59 blades  Aluminum Body This strip cutter can be adjusted by tightening and loosening the screw Width size can be adjusted from .12” - .63” Use with: paper, leather, vinyl, foam core, plastic, cork, fondant, gum paste, wood, cloth, clay carving, polymer clay, vehicle vinyl wrap, and most other light-weight crafting supplies.  Used by: graphic artists, quillers, designers, hobbyists, scrapbook artists, crafters, and car wrappers. Fits: Excel Blades #59 Blade Includes (2) #59 dual cutter blades .12 - .63 in Made in the USA

299,-

** Ikke på lager
KJØP
Art.nr: 16014
Copied
Front Porch Treasures® Pre-Cut Foam Mounting Tape is ideal for scrapbooking! Perfect for adding depth and dimension to make your cards, posters, scrapbooks, invitations and other art projects really POP! This roll contains 10ft of permanent, double-sided pre-cut tape. Pre-Cut Foam Mounting Tape is 100% Acid and Lignin Free! One Roll, 19mmx3.04m   Works best on: 3-Dimensional Projects Cards Die Cuts Invitations Photos Rubber Stamping Scrapbooking Shaker Boxes Stickers

59,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Art.nr: FPEBB1220
Copied
Futaba Multi Transmitter Box (Plastic) - 37x24x16cm This is a multi-use transmitter bag that fits many different Futaba transmitters. The case is hard plastic and the top and bottom is padded with foam. Features: Rugged plastic case Carry handle Carry strap Moveable divider (velcro) YKK zipper Included soft transmitter pouch Size: Length: 370mm Width: 240mm Height: 160mm

1.949,-

2.095,-

På lager 1
KJØP
-7%
Art.nr: HN001-02A
Copied
RUBY Needle & Nozzle Set 0.5mm This is an optional 0.5 mm needle and nozzle set for the Hobbynox RUBY Mini Spray Gun

129,-

139,-

På lager 1
KJØP
-7%
Art.nr: HN001-02B
Copied
RUBY Needle & Nozzle Set 0.8mm This is a spare 0.8 mm needle and nozzle set for the Hobbynox RUBY Mini Spray Gun.

149,-

159,-

På lager 1
KJØP
-6%
Viser 51 til 100 (av 1122 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png