Hopp til innhold

Verktøy/Lakk/Lim

Art.nr: TH130
Copied
Description: This is a Team C Racing Hex driver for 3.0mm Hex   Feature: •For: 3.0mm Hex •Material: Aluminum, Spring steel for the shaft •Color: Gunmetal Specification: •Length: 180mm •Width: 20mm •Hex Size: 3mm •Weight: 65g Include: •Team C Racing 3mm Hex Driver (1 pc)

199,-

På lager 3
KJØP
Art.nr: TN155
Copied
Description: This is Team C Racing Nut Driver for 5.5mm nut   Feature: •Material: Aluminum, Spring steel for the shaft •Color: GunMetal Specification: •Length: 155mm •Width: 20mm •Hex Size: 5.5mm •Weight: 70g Include: •Team C Racing 5.5mm Nut Driver (1pc)

199,-

På lager 1
KJØP
Art.nr: TC180
Copied
Radio Muff (stick version)

490,-

På lager 2
KJØP
Art.nr: TC186
Copied
Team C truggy case - fits for 1:8 truggys. Dimensions of the bag: 600x400x290mm  

769,-

På lager 1
KJØP
Art.nr: TFL-213B90
Copied
20mm tape for tetting av topplokk. Svært få båtskrog er helt tette rundt "inspesksjonsluka", og man kan med fordel tape rundt for tetting. Mange båter er også avhengig av tape for å holde dette lokket på plass.

49,-

På lager 17
KJØP
Art.nr: TITR1412
Copied
Titebond III Ultimate Wood Glue 118ml Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications. Features: Advanced Proprietary Polymer Color: Tan Dried film color: Light brown Passes ANSI/HPVA Type I water-resistance Waterproof formula that cleans up with water Superior strength - Strong initial tack Designed for interior and exterior applications Longer open assembly time Lower application temperature Unaffected by finishes Application Guidelines: Application Temperature: Above 8°C Open Assembly Time: 8-10 minutes (21°C / 50% RH) Total Assembly Time: 20-25 minutes (21°C / 50% RH) Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. Limitations: Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 8°C. Store product below 23°C. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

109,-

** Ikke på lager
KJØP
Art.nr: 1413
Copied
Titebond III Ultimate Wood Glue 237ml Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications. Features: Advanced Proprietary Polymer Color: Tan Dried film color: Light brown Passes ANSI/HPVA Type I water-resistance Waterproof formula that cleans up with water Superior strength - Strong initial tack Designed for interior and exterior applications Longer open assembly time Lower application temperature Unaffected by finishes Application Guidelines: Application Temperature: Above 8°C Open Assembly Time: 8-10 minutes (21°C / 50% RH) Total Assembly Time: 20-25 minutes (21°C / 50% RH) Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods) Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. Limitations: Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 8°C. Store product below 23°C. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

149,-

** Ikke på lager
KJØP
Art.nr: 5062
Copied
Titebond Original Wood Glue 118ml Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water. FEATURES: Fast set - Shortens clamp time Bonds stronger than wood Solvent-Resistant Excellent sandability Unaffected by finishes Easy cleanup with water APPLICATION GUIDELINES: Application temperature: Above 10°C Open assembly time: 4-6 minutes (21°C / 50%RH) Total assembly time: 10-15 minutes (21°C / 50%RH) Required clamping pressure: Enough to bring joints tightly together Method of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. Limitations: Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. PHYSICAL PROPERTIES: Type: Aliphatic resin emulsion Calculated VOC: 10.7 g/L State: Liquid Weight per litre: 1100g Color: Yellow Dried film: Translucent Flashpoint: > 93°C Solids: 46% Viscosity: 3,200 cps PH: 4.0 Storage life: 24 months in tightly closed containers at 24°C

89,-

** Ikke på lager
KJØP
Art.nr: TRX 5041
Copied
Grease, premium high performance (20cc)

159,-

169,-

På lager 9
KJØP
-6%
Art.nr: TRX 5148
Copied
      This is a Tube of White Lithium Grease from Traxxas.         This product can be used to lubricate parts, such as gears. FEATURES: Great lubrication for nylon gears INCLUDES: One tube of lithium grease (volume unknown) REQUIRES: Application to parts needing lubrication.  

39,-

På lager 10
KJØP
Art.nr: TRX 5748
Copied
This is the Traxxas Marine Grease, 30cc FEATURES Roll-up "toothpaste-style" tube   INCLUDES One tube of marine grease compound SPECIFICATIONS  Volume: 1 oz. (30cc)

89,-

99,-

På lager 12
KJØP
-10%
Art.nr: TRX 9916
Copied
Traxxas 9916 - RC Backpack Based on the pro-quality bags our team uses in the field, the Traxxas backpack protects your gear and gets you to your destination in style. The main compartment is perfect for TRX-4 and other 1/10 scale vehicles with semi-rigid front and rear plates for support and thick padded sidewalls. The backpack features two large zippered compartments on the front and four additional hooded pockets on the side. Protect your valuable investment and travel like a pro with the Traxxas RC backpack. Convenient Storage The large main compartment offers ample space for most 1/10 scale Traxxas vehicles with padded sidewalls for extra protection. Zippered front pockets are perfect for tools, spare parts, and other gear. Bottom side pockets are subdivided into eight individual compartments to hold even the largest Power Cell 4s LiPo batteries and the padded top side pockets will accommodate the EZ-Peak® Live Dual charger. Traxxas Tough™ Construction The Traxxas backpack is built to the same standard as the trucks it transports. The high quality Nylon fabric is both strong and lightweight with heavy duty reinforced zippers. The durable weather-resistant material repels water and protects against tears and punctures with robust padding. Heavy duty adjustable shoulder straps and a padded back panel position the weight for maximum comfort on long hauls. A reinforced bottom panel also features tough plastic feet to reduce wear and scuffs for years of service. RC Backpack Quick Features: ­Perfect for TRX-4 and other 1/10 scale vehicles Thick, weather-resistant Nylon construction Heavy duty zippers Padded adjustable shoulder straps and chest strap Back panel padded for comfort Reinforced bottom panel with protective feet Ample Storage Large padded center compartment Dual front zipper pockets Two subdivided battery compartments with room for eight batteries Two hooded compartments for and tools, parts, and gear Main Compartment Size: H585 x W300 x D300mm * Backpack dimensions are approximate; larger models may fit with tires removed. Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton® 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Chevrolet® Corvette® Stingray Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® F-150 Raptor Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT® Hoss® 4X4 VXL Jato® LaTrax® Alias® Quad Rotor Helicopter Nitro Rustler® Nitro Slash Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slayer® Pro 4X4 Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede® Toyota® GR Supra GT4® TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender® TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport High Trail Edition™ TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit

1.895,-

2.095,-

På lager 1
KJØP
-10%
Art.nr: TRX 9917
Copied
Traxxas 9917 - RC Duffel Bag Based on the pro-quality bags our team uses in the field, the Traxxas duffel bag protects your gear and gets you to your destination in style. The main padded compartment accommodates standard 1/8 and 1/10 scale vehicles and features dual ventilated mesh side pockets. Large zippered compartments on each end are subdivided with ample room for a transmitter, tools, batteries, and other gear. Protect your valuable investment and travel like a pro with the Traxxas RC duffel bag. Convenient Storage The large main compartment offers ample space for most 1/8 and 1/10 scale Traxxas vehicles with dual side pockets to stow extra gear. Large end compartments feature adjustable straps to secure a transmitter and charger safely in place. Additional hooded pockets organize batteries, tools, and other gear in separate compartments for easy access. Traxxas Tough™ Construction The Traxxas duffel bag is built to the same standard as the trucks it transports. The high quality Nylon fabric is both strong and lightweight with heavy duty reinforced zippers. The durable weather-resistant material repels water and protects against tears and punctures with robust padding on all sides. Carry handles utilize thick Nylon straps with metal loops for the optional 9924 shoulder strap (sold separately). The reinforced bottom panel also features tough plastic foot rails to reduce wear and scuffs for years of service. RC Duffel Bag Quick Features: ­Holds most 1/8 and 1/10 scale vehicles Thick, weather-resistant Nylon construction Heavy duty zippers Reinforced carry handles Metal rings for optional shoulder strap Protective foot rails Ample Storage Large center compartment with dual mesh pockets Dual oversize outer pockets Adjustable hook and loop straps to secure transmitter and charger Hooded compartments for batteries and tools L745 x W300 x H300mm* *Bag dimensions are approximate; larger models may fit with tires removed. Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton® 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Chevrolet® Corvette® Stingray Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® F-150 Raptor Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT® Hoss® 4X4 VXL Jato® LaTrax® Alias® Quad Rotor Helicopter Nitro Rustler® Nitro Slash Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slayer® Pro 4X4 Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede® Summit Toyota® GR Supra GT4® TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender® TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport High Trail Edition™ TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit

1.495,-

1.695,-

På lager 1
KJØP
-12%
Art.nr: 40078
Copied
UHU HART Glue 35 g UHU hart is a crystal-clear, fast drying adhesive for assembling small parts in model building, for handicraft work and for household tasks. Particularly suitable for balsa wood and other wooden materials. UHU hart is also suitable for stiffening and sealing the surface of materials. Dries hard. Features: Crystal clear, quick-setting special adhesive for assembling small parts in model building, handicraft and general use at home Particularly suitable for balsa wood and wooden materials A separate fine nozzle Materials: Glues balsa wood, wood based materials, metal and many types of plastic. For model building. Not suitable for Styrofoam®, PE nor PP. Use and Handling Instructions: Surfaces must be dry and free of dust and grease. Apply a thin layer to one side. Immediately place the parts together and hold in place. For hard, enclosed surfaces apply a thin layer to both sides, let the adhesive dry, then re-apply to one side, place the parts together and hold in place. Content: Tube/Blister - 35 g / 33 ml

49,-

** Ikke på lager
KJØP
Art.nr: 41015
Copied
UHU ALL PURPOSE ADHESIVE - Power transparent UHU All Purpose Power transparent, the transparent, fast and powerful universal adhesive with execptional bonding strength in the special, soft, handy and unbreakable Flex+Clean plastic tube. Particularly suitable for visible and transparent assemblies. Can be used in single-side bonds (wet bonding) or in dual-side bonds (contact bonding). The adhesive film remains elastic, is U.V. resistant, and does not become brittle. Suitable for use with both rigid and flexible materials (particularly flexible PVC such as pond liners), not for Styropor®. Can also be used under water. Resistant to water, oil, grease, dilute acids, alkalis and alcohol.   Transparent power adhesive with exceptional bonding strength Super fast and super strong Can be applied to one or both sides of the material (contact adhesion) Can be used under water (i.e. pvc-foiles) Also in the FLEX+CLEAN plastic tube: clean and non-drip, easy handling Materials: Universal - glues wood, wood based materials, plastics (ABS, hard- and soft pvc, Plexiglas®, polystyrene, Resopal®), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper. Ideal for visible glue joints and tranparent materials. Not suitable for PE & PP. Use and Handling Instructions: Thoroughly clean the surfaces to be stuck (dry and free of dust and grease). Single-sided application: apply the adhesive to one side of the assembly, press together - that's it! Double-sided application: apply adhesive thinly and evenly to both parts of the assembly - porous materials possibly several times. Leave to dry. Once it is dry to the touch (after approx. 10 minutes), press the parts together briefly and firmly. Correction is no longer possible after assembling. Content: 42 g / 45 ml

49,-

På lager 5
KJØP
Art.nr: 40359
Copied
UHU POR GLUE (FOAM FRIENDLY) 50ML quick-setting special adhesive for bonding hard foam such as Styrofoam®, also in combination with other materials the elastic adhesive film is colourless, non-ageing, and waterproof. UHU por is a quick-setting special adhesive for bonding expanded polysterene, e.g. Styropor® also in combination with other materials. It forms an elastic adhesive film which is highly resistant to age, colorless and waterproof. Designed to glue all types of foam including Depron. Clear, fast drying and very strong contact glue takes only 10 minutes to set then its ready to press together. Will glue virtually anything to foam.   UHU Por er kontaktlim for isopor og styropor, men også tre, papir, metall, keramikk, gips og tekstiler, ikke PE/PP. Limet er ikke etsende. UHU Por er vannavstøtende og elastisk. Fare: H225 Meget brannfarlig væske og damp. H315 Irriterer huden. H336 Kan forårsake døsighet eller svimmelhet. H411 Giftig, med langtidsvirkning, for liv i vann. 40 gr.  

69,-

På lager 11
KJØP
Art.nr: 840611
Copied
Produktinformasjon: UHU Por er et hurtigtørkende spesial lim til bruk på polystyren/styropor/isopor/depron. Limet er elastisk etter herding og er også vanntett. UHU POR Glue 40 g UHU por is a quick-setting special adhesive for bonding expanded polysterene, e.g. Styropor® also in combination with other materials. It forms an elastic adhesive film which is highly resistant to age, colorless and waterproof. Features: Quick-setting special adhesive for bonding hard foam such as Styrofoam®, also in combination with other materials The elastic adhesive film is colourless, non-ageing, and waterproof Materials: Glue expanded Styrofoam® also in combination with other materials, e.g. wood, paper, metal, ceramic, plaster, fabric and various plastics. Also for photos. Use and Handling Instructions: Apply adhesive to both parts and let dry. Once dry to the touch (after approx. 10 minutes) press together very firmly for a short time being careful not to damage the rigid foam film. Content: Tube/Blister - 40 g / 50 ml Meget brannfarlig væske og damp. Gir alvorlig øyeirritasjon. Kan forårsake døsighet eller svimmelhet. Meget giftig, med langtidsvirkning, for liv i vann.

69,-

** Ikke på lager
KJØP
Art.nr: WD40
Copied
WD-40 200ml Aerosol Product description The WD-40 Aerosol 200ml can be used for multiple jobs around the home, garage or workshop. It cleans grease and grime as well as dissolving adhesives, allowing the easy removal of labels and stickers. Use WD-40 to protect metal surfaces against moisture and other corrosive elements and lubricate all moving parts. It can also be used to penetrate rusted or frozen metal parts for easier removal. WD-40 displaces moisture and is ideal for use on electrical systems to eliminate moisture-induced short circuits (always turn the power off before you spray). Features & Benefits of WD-40 Aerosol 200ml Stops squeaks Drives out moisture Cleans and protects Loosens rusted parts Frees sticky mechanisms Aerosol spray with straw WD-40® MULTI-USE PRODUCT FULFILLS FIVE BASIC FUNCTIONS: LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts. PENETRATES: WD-40® Multi-Use Product loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements. REMOVES: WD-40® Multi-Use Product gets under dirt, grime and grease. Use it to remove gunk from tools, equipment and vehicles. WD-40® Multi-Use Product in liquid form (e.g., gallon) also dissolves adhesives, allowing easy removal of excess bonding material. DISPLACES MOISTURE: Because it displaces moisture, WD-40® Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.

89,-

På lager 14
KJØP
Art.nr: WD40
Copied
WD-40 250ml Aerosol Product description The WD-40 Aerosol 250ml can be used for multiple jobs around the home, garage or workshop. It cleans grease and grime as well as dissolving adhesives, allowing the easy removal of labels and stickers. Use WD-40 to protect metal surfaces against moisture and other corrosive elements and lubricate all moving parts. It can also be used to penetrate rusted or frozen metal parts for easier removal. WD-40 displaces moisture and is ideal for use on electrical systems to eliminate moisture-induced short circuits (always turn the power off before you spray). Features & Benefits of WD-40 Aerosol 250ml Stops squeaks Drives out moisture Cleans and protects Loosens rusted parts Frees sticky mechanisms Aerosol spray with straw WD-40® MULTI-USE PRODUCT FULFILLS FIVE BASIC FUNCTIONS: LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts. PENETRATES: WD-40® Multi-Use Product loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements. REMOVES: WD-40® Multi-Use Product gets under dirt, grime and grease. Use it to remove gunk from tools, equipment and vehicles. WD-40® Multi-Use Product in liquid form (e.g., gallon) also dissolves adhesives, allowing easy removal of excess bonding material. DISPLACES MOISTURE: Because it displaces moisture, WD-40® Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.

119,-

På lager 2
KJØP
Art.nr: wgt360
Copied
This is the 1/8 scale WGT360 Buggy Pak from Wingtote. FEATURES Holds a standard 1/8 scale buggy Outer nylon shell in red and black Wide web strap handle for easy transport Reinforced lid liner to prevent damage from shock towers Washable liner for easy clean-up INCLUDES 1/8 scale Buggy Tote from Wingtote SPECIFICATIONS Length: 18.5" (470mm) Width: 14" (356mm) Depth: 6" (152.4mm)

430,-

439,-

På lager 3
KJØP
-2%
Art.nr: 397232
Copied
Extended Product Information: Ultra durable, Team XRAY padded carrying bag for carrying your RC car, tools, batteries, and gear. Heavy-duty zipper secures one entire end of the bag. End flap features holder for driver identification card, and flips completely out of the way for unobstructed access to spacious interior. Spacious 500x250x420mm interior has room for one large (465x220x130mm) and three small (465x220x87) storage boxes (included) plus a Hudy Set-Up Board (not included). Reinforced waterproof storage boxes made from a special rigid high-quality composite material for long life and extra durability. Strong nylon carrying straps with padded handle allow for easy, comfortable carrying. Four heavy-duty straps protect the bottom of the bag from wear. • Premium, exclusive tool carrying bag • Super modern and outstanding never seen before look • Cool, stylish and full-color graphics around the bag • High-quality European materials • Manufactured exclusively in Slovakia, Europe • Ideal size for carrying all the tools and accessories • Holds up to 30 tools • Easy to organize tools inside the box • Super-strong stretchy xylan holds the tools and will keep its stretchy characteristics long time • Inside walls a strong plastic sheets are sewn up to reinforce the walls of the carrying bag to ensure when the bag is fully loaded with tools it will not twist or bend • Heavy-duty lockable zipper • Strong yet super-soft spongy handle for comfortable handling

1.995,-

2.195,-

** Ikke på lager
KJØP
-9%
Art.nr: YA-0223
Copied
Yeah Racing Universal Cleaning Case Description: This Yeah Racing Universal Cleaning Case helps to remove dust and dirt of the bearings/screws/small parts with hassle-free. Simply put the bearings/screws/small parts inside the cleaning case, add cleaners and shake the case until dust/dirt is being removed. Feature: For: Miscellaneous Specification:   Length: approx. 90mm Width: approx. 50mm Include: Yeah Racing (#YA-0223) Universal Cleaning Case (1pc)

99,-

På lager 4
KJØP
Art.nr: YT-0196
Copied
Yeah Racing 1.1-2.0mm Steel Twist Drill 10 in 1 Set w/ Aluminum Handle Description: Drill bits for installing into a handheld drill or a dremel for use to either modify shock pistons or places where small holes are needed! Color coded with corresponding sizes for easy management. Comes with 10pcs, increasing in 0.1mm increments ranging from 1.1 to 2mm. *Photos for reference only. Feature: Color: Silver/Black Aluminum Handle Material: Steel/Aluminum Handle Include: Steel Twist Drill Bits (10 pcs) Aluminum Handle (1 pc)

169,-

199,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-15%
Art.nr: YA-0449
Copied
Yeah Racing 1/10 RC Rock Crawler Accessory Height Adjustable 3 Ton Jack Black 2pcs Description: This Yeah Racing 1/10 RC Rock Crawler Accessory Height Adjustable 6 Ton Pack comes in pairs, featuring realistic look and similar functions like the real thing! They can support and hold most cars and trucks safetly off the ground, prefect for RC repair work or storage. It is made of metal, portable and tough, making these heavy duty jack stands the perfect addition to your RC garage or auto shop. *Photos for reference only. Feature: For: 1/10 RC Material: Steel Color: Black Specification: Height: 80 - 100mm Weight: 100g each Include: Height adjustable 6 Ton Jack (2 pcs)

279,-

299,-

** Ikke på lager
KJØP
-7%
Art.nr: YA-0737BK
Copied
Large adjustment range servo horn which allows it to be able to used in a large selection of cars, the height adjustment is also used as a setup for how aggressive your steering response is! If your car is twitchy, just lower the height to dial it down.   Feature:   For: 25T Servo Spline Servos Material: Aluminum Color: Black   Include:   25T Aluminium 7075 Adjustable Servo Horn (1 pc)

179,-

199,-

På lager 5
KJØP
-10%
Art.nr: YA-0737BU
Copied
Large adjustment range servo horn which allows it to be able to used in a large selection of cars, the height adjustment is also used as a setup for how aggressive your steering response is! If your car is twitchy, just lower the height to dial it down.   Feature:   For: 25T Servo Spline Servos Material: Aluminum Color: Blue     Include:   25T Aluminium 7075 Adjustable Servo Horn (1 pc)

179,-

199,-

På lager 2
KJØP
-10%
Art.nr: YA-0737PP
Copied
Large adjustment range servo horn which allows it to be able to used in a large selection of cars, the height adjustment is also used as a setup for how aggressive your steering response is! If your car is twitchy, just lower the height to dial it down.   Feature:   For: 25T Servo Spline Servos Material: Aluminum Color: Purple   Include:   25T Aluminium 7075 Adjustable Servo Horn (1 pc)

179,-

199,-

På lager 3
KJØP
-10%
Art.nr: YT-0183
Copied
Yeah Racing Aluminum 1.5mm Allen Hex Driver Tool Black Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Driver (1 pc)

99,-

109,-

** Ikke på lager
KJØP
-9%
Art.nr: YT-0184
Copied
Yeah Racing Aluminum 2.0mm Allen Hex Driver Tool Black Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Driver (1 pc)

99,-

109,-

** Ikke på lager
KJØP
-9%
Art.nr: YT-0185
Copied
Yeah Racing Aluminum 2.5mm Allen Hex Driver Tool Black Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Driver (1 pc)

99,-

109,-

På lager 2
KJØP
-9%
Art.nr: YT-0186
Copied
Yeah Racing Aluminum 3.0mm Allen Hex Driver Tool Black Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Driver (1 pc)

99,-

109,-

På lager 2
KJØP
-9%
Art.nr: YT-0226
Copied
Description: Aluminum nut driver for removing 5mm locknuts, black/gold coloring to match other Xtra Speed tool accessories!     Feature:   For: Car Building / TRX-4M Material: Aluminum Color: Black/Gold   Include:   5.0mm Lock Nut Driver x 1pc Sticker x 1pc

99,-

På lager 1
KJØP
Art.nr: YA-0291-10PX
Copied
Yeah Racing Transmitter Bag For Futaba 10PX Description: The transmitter is one of the most important items in RC equipment; it deserves extra care and protection. Yeah Racing's Transmitter Bagsis designed to offer high level protection to the transmitter. It is made of light weight Nylon materials which are rigid enough to prevent your transmitter from being crushed. Comfortable handle High-quality, light weight materials Durable, rigid material to prevent the bag from being crushed. Protect your equipment with Yeah Racing¡¦s Transmitter Bag! Feature: Material: Nylon Color: Black Include: Transmitter Bag (1 pc)

649,-

699,-

På lager 1
KJØP
-7%
Art.nr: YA-0291-7PX
Copied
Yeah Racing Transmitter Bag For Futaba 7PX 7PXR Description: The transmitter is one of the most important items in RC equipment; it deserves extra care and protection. Yeah Racing's Transmitter Bagsis designed to offer high level protection to the transmitter. It is made of light weight Nylon materials which are rigid enough to prevent your transmitter from being crushed. Comfortable handle High-quality, light weight materials Durable, rigid material to prevent the bag from being crushed. Protect your equipment with Yeah Racing¡¦s Transmitter Bag! Feature: Material: Nylon Color: Black Include: Transmitter Bag (1 pc)

649,-

699,-

** Ikke på lager
KJØP
-7%
Art.nr: YA-0194
Copied
Yeah Racing Multi-Purpose Mini-Box (S) (BK) L86x W55 x H20mm Description: Are you always stress about missing the important screws/parts when tuning up your RC Cars/Helicopters? Why don't you get our brand new Yeah Racing (#YA-0194) Multi-Purpose Mini Box! It definitely helps to tidy up the screws/parts storage ideally. It provides 6 partitions therefore you can store the screws/parts in a more convenient way. It is also small in size so you can tune the RC while in race track or even on your desktop without losing your screws/parts. Feature: Ideal For: screws/small parts storage Material: Plastic Color: Black Specification: Length: Approx. 86mm Width: Approx. 55mm Height: Approx. 20mm Include: Multi-Purpose Mini-Box (1 Pc)

29,-

På lager 5
KJØP
Art.nr: YA-0583
Copied
Yeah Racing Sn63 Pb37 Solder Wire 50g 1mm Diameter Description: Yeah Racing Sn63 / Pb37 solder wires are formulated from a mix of 63% tin and 37% lead. Made from high quality metals, the flux core manufacturing process eliminates flux voids and irregular wire. A higher amount of Tin allows for this solder wire to flow better allowing for easy soldering onto wire posts and motor tabs! Feature: For: Soldering Material: Tin/Lead Color: Silver Include: Solder Wire Roll (1 pc)

89,-

99,-

** Ikke på lager
KJØP
-10%
Art.nr: YA-0595
Copied
Yeah Racing Double Sided Mounting Tape Feature: Mount all sorts of different items to your chassis securely with this mounting tape! Features a soft yet highly adhesive surface means you can even secure items which dont have a fully flat surface onto your chassis! Leaves the least amount of residue when removing so your chassis or surface isn't ruined! Measuring 20mm wide and comes in a 2m length.   Features: For: RC Car Material: Acrylic Color: Clear Tape   Includes: Double Sided Mounting Tape (1 pc)

59,-

69,-

** Ikke på lager
KJØP
-14%
Art.nr: YT-0004
Copied
Material: Aluminium Length: 140mm Colour: Black Qty: 1Pc

59,-

På lager 9
KJØP
Art.nr: YT-0135BK
Copied
Yeah Racing Aluminum Ball End Remover For 4 4.8 5 6mm Ball End Black Description: A perfect tool for removing stubborn ball ends with minimum efforts as well as wears on the ball ends. With this tool, you will need only a second to remove ball ends which make it a life saver when you are need a quick fix on the track-side. A must have item for any racers.   Features: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: Black   Specifications: Length: 80mm Width: 150mm Height: 50mm Weight: 10g   Includes: Yeah Racing Aluminum Ball End Remover (1 pc)

79,-

** Ikke på lager
KJØP
Art.nr: YT-0149BK
Copied
Yeah Racing Multi Function Car Setup Stand for 1/10 On Road Black Description: Introducing the Yeah Racing Car setup stand featuring a carbon fibre top plate and with aluminum side rails! Carbon Fibre was chosen as the top plate as it is less prone to bending when compared to aluminum allowing for a more sturdier car stand. Also has pre drilled holes which allows this car stand to act as a shock stand for rebuilding shocks, markings indicating which corner the shock was from will help you manage your shocks easier as well! Comes with foam padding to provide anti-slipping when placed on your pit table!         Features: For: 1/10 On road Car Material: Aluminum, Carbon Fibre Color: Black with High Shine Chamfered edge finishing.   Includes: Yeah Racing Multi Function Car Setup Stand (1 pc)

349,-

** Ikke på lager
KJØP
Art.nr: YT-0163
Copied
Yeah Racing Super Hard Steel Allen Wrench Replacement Tip 1.5mm X 120mm 2 pcs for Hudy/EDS/ Handles Description: Yeah Racing Super Hard Steel precision machined replacement tips, size and shape specially measured and manufactured with tight tolerances for the ultimate R/C building experience. Special treatment processes which results in "Super Hard" tips which lengthens the lifetime and reduces chance of stripping screws!       Features: For: Hudy/EDS/Yeah Racing Tool Handles Material: Steel Color: Black   Includes: Yeah Racing Super Hard Steel Allen Wrench Replacement Tip (2 Pcs)

69,-

** Ikke på lager
KJØP
Art.nr: YT-0164
Copied
Spring Steel Allen Wrench Replacement Tip 2.0mm X 120mm 2 pcs   Yeah Racing Super Hard Steel precision machined replacement tips, size and shape specially measured and manufactured with tight tolerances for the ultimate R/C building experience. Special treatment processes which results in "Super Hard" tips which lengthens the lifetime and reduces chance of stripping screws!   Features: For: Hudy/EDS/Yeah Racing Tool Handles Material: Spring Steel Color: Brown   Includes: Yeah Racing Super Hard Steel Allen Wrench Replacement Tip (2 Pcs)

69,-

** Ikke på lager
KJØP
Art.nr: YT-0165
Copied
Yeah Racing Super Hard Steel Allen Wrench Replacement Tip 2.5mm X 120mm 2 pcs for Hudy/EDS/ Handles Description: Yeah Racing Super Hard Steel precision machined replacement tips, size and shape specially measured and manufactured with tight tolerances for the ultimate R/C building experience. Special treatment processes which results in "Super Hard" tips which lengthens the lifetime and reduces chance of stripping screws! *Photos for reference only. Feature: For: Hudy/EDS/Yeah Racing Tool Handles Material: Steel Color: Black Include: Yeah Racing Super Hard Steel Allen Wrench Replacement Tip (2 Pcs)

59,-

** Ikke på lager
KJØP
Art.nr: YT-0166
Copied
Yeah Racing Super Hard Steel Allen Wrench Replacement Tip 3.0mm X 120mm 2 pcs for Hudy/EDS/ Handles Description: Yeah Racing Super Hard Steel precision machined replacement tips, size and shape specially measured and manufactured with tight tolerances for the ultimate R/C building experience. Special treatment processes which results in "Super Hard" tips which lengthens the lifetime and reduces chance of stripping screws!       Features: For: Hudy/EDS/Yeah Racing Tool Handles Material: Steel Color: Black   Includes: Yeah Racing Super Hard Steel Allen Wrench Replacement Tip (2 Pcs)

59,-

** Ikke på lager
KJØP
Art.nr: YT-0178BK
Copied
Yeah Racing Aluminum Body Mounting Hole Reamer 0-14mm Black Description: Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!   Features: For: Body Mounting Material: Aluminum Color: Black   Includes: Aluminum Body Mounting Hole Reamer (1 pc)

209,-

229,-

** Ikke på lager
KJØP
-9%
Art.nr: YT-0178BU
Copied
Yeah Racing Aluminum Body Mounting Hole Reamer 0-14mm Blue Description: Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!   Features: For: Body Mounting Material: Aluminum Color: Blue   Includes: Aluminum Body Mounting Hole Reamer (1 pc)

199,-

** Ikke på lager
KJØP
Art.nr: YT-0178OR
Copied
Yeah Racing Aluminum Body Mounting Hole Reamer 0-14mm Orange Description: Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!   Features: For: Body Mounting Material: Aluminum Color: Orange   Includes: Aluminum Body Mounting Hole Reamer (1 pc)

199,-

** Ikke på lager
KJØP
Art.nr: YT-0187
Copied
Yeah Racing Aluminum Drive Hex Wrench Set (1.5/2.0/2.5/3.0mm Hard Steel Allen Wrench) Black/Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! This set comes with the most used four sizes, so you can buy this set not having to worry not having the right tool! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Drivers (4 pcs)

349,-

399,-

** Ikke på lager
KJØP
-13%
Art.nr: YT-0190
Copied
Yeah Racing Aluminum Alloy Car Stand for On Road Description: Easily make fixes to your car or install upgrades with this car stand! Soft sponge on the top part so your car doesn't slide off.     Features: For: 1/10 1/12 On Road RC Car Material: Aluminum & Alloy Rotatable Plate Color: Black   Includes: Aluminum Car Stand (1 pcs)

199,-

** Ikke på lager
KJØP
Art.nr: YT-0192
Copied
Yeah Racing Aluminum 7mm Lock Nut Driver Black Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Nut Driver (1 pc)

99,-

109,-

** Ikke på lager
KJØP
-9%
Viser 751 til 800 (av 1122 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png