Traxxas

Servoer Hitec

Populært i denne kategorien

Hovedbilde Hitec HS-5585MH Coreless Hi-Torque Metal Gear Servo

Hitec HS-5585MH Coreless Hi-Torque Metal Gear Servo

Art.nr: 35585S

Copied

This is the Hitec HS-5585MH High Voltage, High Speed Digital Servo. FEATURES: Rated for 2S LiPo operation Ideal for 1/10 scale monster trucks, 1/8 scale buggies and truggies, and high performance airplanes up to 35% Heavy duty metal gears and dual ball bearings Coreless motor Two year limited warranty through Hitec beginning at date of purchase INCLUDES: HS-5585MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and Instructions SPECS: Operating Voltage: 6.0 - 7.4V DC 6.0V 7.4V Speed: 0.17 sec/60° 0.14 sec/60° Torque: 194 oz-in (11 kg-cm) 236 oz-in (14 kg-cm) Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 37.8mm) Weight: 2.10oz (60g) Wire Length: 11.8" (30mm) Wire Gauge: 25AWG Operating Temperature Range: -4 to 140°F Idle Current: 4mA Stall Current: 2100mA @ 6.0V, 2700mA @ 7.2V Potentionmeter Type: 4 slider 1M cycle COMMENTS: A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

995,-

1.095,-

-9%

Hovedbilde Hitec HS-5625MG Digital High-Speed Metal Gear BB Servo

Hitec HS-5625MG Digital High-Speed Metal Gear BB Servo

Art.nr: 35625S

Copied

This is a Hitec Digital, Super Speed, Metal Gear, Programmable Servo that will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems. FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS). MOSFET amplifier. Gold plated contacts. Three metal gears Dual ball bearings. Indirect drive long life potentiometer. High standing torque. Watertight and dustproof. Includes blue aluminum, heat-treated servo arm (see COMMENTS). Works with fixed winged aircraft and helicopters up to 40 pounds, 1/10th and 1/8th on- or off-road vehicles. INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector One white small X-shaped servo horn. One red Large X-shaped servo horn. One white adjustable servo horn. One white off-set straight servo horn. One white disc servo horn. One blue aluminum, heat-treated servo arm horn. Four 2 x 14mm mounting screws Four brass eyelets Four black rubber vibration isolators. REQUIRES: Hitec, JR and Airtronics-Z radio system SPECS: Speed: 0.17 sec/60° at 4.8V Speed: 0.14 sec/60° at 6.0V Torque: 109.7 oz-in at 4.8V Torque: 130.53 oz-in at 6.0V Length: 1.59" (40.6mm) Width: 0.77" (19.8mm) Height: 1.48" (37.8mm) Weight: 2.11oz (60g) COMMENTS: Programming the failsafe: In order to program the Fail-Safe on this servo. Modeler will need to purchase the Hitec field programmer sold separately.

629,-

719,-

-13%

Hovedbilde Hitec HS-5645MG Digital Ultra Torque Metal Gear 2BB

Hitec HS-5645MG Digital Ultra Torque Metal Gear 2BB

Art.nr: 35645S

Copied

This is a Hitec Super Torque, Metal Gear, that will work with Futaba J, Hitec S, JR, and Airtronics-Z radio systems. FEATURES: EPA, Speed, Direction, and Fail-Safe Programmable (see COMMENTS). MOSFET amplifier. Gold plated contacts. Three metal gears Dual ball bearings. Indirect drive long life potentiometer. High standing torque. Watertight and dustproof. Includes blue aluminum, heat-treated servo arm (see COMMENTS). Works with fixed wing aircraft and helicopters up to 40 pounds, 1/10th and 1/8th on- or off-road vehicles. INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector One white small X-shaped servo horn. One red Large X-shaped servo horn. One white adjustable servo horn. One white offset straight servo horn. One white disc servo horn. One blue anodized, heat treated servo arm horn. Four 2 x 14mm mounting screws Four brass eyelets Four black rubber vibration isolators. REQUIRES: Futaba J Hitec, JR, or Airtronics-Z radio system SPECS: Speed: 0.23 sec/60° at 4.8V Speed: 0.18 sec/60° at 6.0V Torque: 143.03 oz-in at 4.8V Torque: 164.2 oz-in at 6V Length: 1.59" (40.6mm) Width: 0.77" (19.8mm) Height: 1.48" (37.8mm) Weight: 2.11oz (60g) COMMENTS: Programming the Fail-Safe: In order to program the Fail-Safe on this servo. Modeler will need to purchase the Hitec Field Programmer. The metal servo horn will fit any Hitec servos that have a "+" stamped on top of the output shaft.

689,-

789,-

-13%

Hovedbilde Hitec HS-5646WP High Voltage, High Torque, ...

Hitec HS-5646WP High Voltage, High Torque, ...

Art.nr: 35646S

Copied

Perfekt til å erstatte Traxxas 2075! Husk at denne har 24T spline, så Traxxas sitt originale servohorn vil ikke passe på denne, og må byttes ut. Our new waterproof servos have what it takes to keep your radio control vehicle, airplane or robot watertight! With high torque, dual ball bearings and metal gears, our digital waterproof servos have the industry’s first IP67* rating ranking them among the most durable and reliable servos for wet conditions. Whether you are manning your power boat, bashing in the mud, directing your underwater robot, or water landing your 25% plane, the HS-5646WP will dependably keep your mind at ease. Specifications Motor Type: 3 Pole Bearing Type: Dual Ball Bearing Speed (6.0V/7.4V): 0.20 / 0.18 Torque oz./in. (6.0V/7.4V): 157 / 179 Torque kg./cm. (6.0V/7.4V): 11.3 / 12.9 Size in Inches: 1.65 x 0.83 x 1.57 Size in Millimeters: 41.8 x 21.0 x 40.0 Weight oz.: 2.15 Weight g.: 61

599,-

799,-

-25%

Hovedbilde Hitec HS-56HB Premium Feather KG Sub Micro Servo U

Hitec HS-56HB Premium Feather KG Sub Micro Servo U

Art.nr: 33056S

Copied

This is the Hitec HS-56HB Feather Sub Micro Servo designed for use with Park Flyers, high performance electric models and gliders up to 2 meters. FEATURES: Ball bearing Karbonite gears Upright or flat mounting tabs Compatible with Futaba J, Hitec, JR and Airtronics Z receivers INCLUDES: One servo with Hitec S style Connector and pre-installed 1" 4 arm servo horn One 1" (25.4mm) long single arm servo horn One 1-3/8"(35mm) double arm servo horn Four 3/8" (10mm) long screws (for mounting the servo into your model) SPECS: Length: .88" (23mm) Width: .45" (12mm) Height: .95" (24mm) Speed: 0.12sec/60° @ 4.8V 0.1sec/60° @ 6V Torque: 16.66 oz-in (1.2 kg-cm) @4.8V 19.4 oz-in (1.4 kg-cm) @ 6V Weight: 11.2g (0.39oz)

275,-

Hovedbilde Hitec HS-625MG High Speed 2BB Metal Gear Servo

Hovedbilde Hitec HS-625MG High Speed 2BB Metal Gear Servo

Hitec HS-625MG High Speed 2BB Metal Gear Servo

Art.nr: 32625

Copied

Hitec HS-625MG High Speed 2BB Metal Gear Servo This is a Metal Gear, Super Torque Servo with Futaba J, Hitec, JR and Airtronics Z Universal connector. FEATURES: Three metal gears Metal/plastic 1st gear Dual ball bearing Designed for R/C helicopters, boats, and glow or electric cars. INCLUDES: One servo with pre-installed round (disk) servo horn Four grommets Four brass eyelets Four round, flanged, phillips head screws 1.5 x 14mm One adjustable servo horn One large X servo horn (43mm end to end) One small X servo horn (30mm end to end) One straight servo horn (33mm end to end) SPECS: Speed: 0.18sec/60° at 4.8V 0.15sec/60° at 6.0V Torque: 5.5 kg-cm (76.37 oz-in) at 4.8V 6.8 kg-cm (94.43 oz-in) at 6.0V Length: 40.6mm (1.59") Width: 19.8mm (0.77") Height: 37.8mm (1.48") Weight: 60g (2.11oz)

599,-

Hovedbilde Hitec HS-646WP Analog Waterproof High Voltage Servo

Hitec HS-646WP Analog Waterproof High Voltage Servo

Art.nr: 32646S

Copied

This is the Hitec HS-646WP High Voltage Analog Waterproof Ultra Torque Servo. FEATURES: Waterproof-industry first IP67 rating, ranking these as among the most durable and reliable servos for wet conditions 3-pole motor Dual ball bearings INCLUDES: Hitec HS-646WP Servo with 1.02" (26mm) Single Arm, 2.3" (59mm) Double Arm, 1.6" (42mm) Four Point Horn, 0.98" (25mm) Single Arm and Mounting Hardware SPECS: 6.0V 7.4V Speed: 0.20 sec at 60° 0.17 sec at 60° Torque: 133oz/in (9.6kg/cm) 161 oz/in (11.6kg/cm) Size: 1.65 x 0.83 x 1.57" (41.8 x 21.0 x 40.0mm) Weight: 2.12oz (60g)

599,-

699,-

-14%

Hovedbilde Hitec HS-65HB Mighty Karbonite Feather Micro Servo U

Hitec HS-65HB Mighty Karbonite Feather Micro Servo U

Art.nr: 33065S

Copied

This is the Hitec HS-65HB Mighty Feather Micro Servo with Universal Futaba J, Hitec S, JR and Airtronics Z Connector. FEATURES: HS-65HB has long lasting and durable Karbonite gears One of the slimmest micro servos available Hitec's most powerful servo in the micro class The HS-65HB was created for higher performance micro helicopters, electric Park Flyers, & 1/18 scale cars, and features a top ball- bearing for long life and positive centering INCLUDES: (1) HS-65HB Micro Servo (4) M1.7x7 servo mounting screws (1) Two-sided servo horn (1) One-sided servo horn (1) M1.7x3 servo horn screw (1) Four-sided servo horn SPECS: Length: 0.92" (23.6mm) Width: 0.45" (11.6mm) Height: 0.94" (24mm) Weigth: 0.38oz (11.2g) Speed: 0.14/60° @ 4.8V Output Torque: 1.8kg-cm @ 4.8V

339,-

439,-

-23%

Hovedbilde Hitec HS-65MG Mighty Metal Gear Feather Micro Servo U

Hitec HS-65MG Mighty Metal Gear Feather Micro Servo U

Art.nr: 32065S

Copied

This is the Hitec HS-65MG Mighty Feather Metal Gear Micro Servo with Universal Futaba J, Hitec S, JR and Airtronics Z Connector. FEATURES: HS-65MG has long lasting and durable metal gears One of the slimmest micro servos available High efficiency Neodymium magnet motor The HS-65MG was created for fast Park Flyer models, electric micro planes, MAVs and 1/18 scale cars, and features a top ball-bearing for long life and positive centering INCLUDES: (1) HS-65MG Micro Servo (4) M1.7x7 servo mounting screws (1) Two-sided servo horn (1) One-sided servo horn (1) M1.7x3 servo horn screw (1) Four-sided servo horn SPECS: Length: 0.92" (23.6mm) Width: 0.45" (11.6mm) Height: 0.94" (24mm) Weigth: 0.44oz (12.5g) Speed: 0.14sec/60° @ 4.8V 0.11sec/60° @ 6V Output Torque: 24.99 oz-in (1.8 kg-cm) @ 4.8V 30.55 oz-in (2.2 kg-cm) @ 6V

469,-

529,-

-11%

Hovedbilde Hitec HS-7115TH HV Titanium Gear Slim Wing Servo

Hitec HS-7115TH HV Titanium Gear Slim Wing Servo

Art.nr: 37115

Copied

This is the Hitec HS-7115TH Slim Wing Titanium Gear Servo. FEATURES Designed for slim wing aircraft such as sailplanes, pylon racers and other small scale models Extremely thin 0.31" (8mm) wide case with mounting bracket allows installation into the tightest wings and most compact spaces Three pole metal brushed motor and titanium alloy gear train Dual ball bearings 2-cell and 6-cell NiMH compatible Programmable digital amplifier with MOSFET drive (requires Hitec Servo Programmer, sold separately) INCLUDES Hitec HS-7115TH Slim Wing Servo with Mounting Bracket, two 0.83" (21mm) Single Arm Servo Arms and Instructions SPECIFICATIONS Motor Type: 3 Pole Metal Brush with Ferrite Magnets Speed: 0.12 at 6.0V, 0.10 at 7.4V Torque: 44 oz/in at 6.0V, 54 oz/in at 7.4V 3.2 kg/cm at 6.0V, 3.9 kg/cm at 7.4V Dimensions: 1.02 x 0.31 x 1.50" (26 x 8.0 x 38mm) Weight: 0.71oz (20g)

1.149,-

1.249,-

-8%

Hovedbilde Hitec HS-755HB Giant Scale Karbonite Gear 2BB Servo U

Hitec HS-755HB Giant Scale Karbonite Gear 2BB Servo U

Art.nr: 33755

Copied

This is a Hitec HS-755HB Quarter Scale Servo with Universal Futaba J, Hitec S, JR and Airtronics Z Connector. FEATURES Ball bearing Karbonite gears INCLUDES One servo Black round servo horn Black long and short double straight servo horn Black long and short single straight servo horn Four servo grommets Four brass eyelets Four S/T servo mounting screws Decals SPECIFICATIONS Length: 2.32" (59mm) Width: 1.14" (29mm) Height: 1.96" (50mm) Weight 3.88oz (110g) Operating speed: .28 sec/60 degree at 4.8V Output torque: 152.75 oz-in (11 kg-cm) at 4.8V

599,-

Hovedbilde Hitec HS-755MG Giant Scale Metal Gear 2BB Servo

Hitec HS-755MG Giant Scale Metal Gear 2BB Servo

Art.nr: 32755

Copied

Kvartskala-servo fra Hitec som drar 14,4kg @ 6V. This is the HS-755MG Quarter Scale Metal Geared Dual Ball Bearing Servo from Hitec. FEATURES Metal geared Dual ball bearing output spline Water and dust tight Designed for use in large models INCLUDES One HS-755MG giant dual BB servo with Hitec/JR/Z tupe connector One servo accessory package containing: One 1" (26mm) single arm servo horn(pre-installed on servo) One 1.3" (33mm) single arm servo horn One 2.3" (58mm) dual arm servo horn One 1.7" (43mm) diameter servo wheel One 2.8" (71mm) dual arm servo horn Four brass eyelets Four servo mounting screws Four rubber grommets REQUIREMENTS Installation SPECIFICATIONS Length: 2.32" (59mm) Width: 1.14" (29mm) Height: 1.96" (50mm) Weight: 4.12oz (117g) Speed: .28 sec/60° @ 4.8V, .23 sec/60° @ 6V Torque: 166.64 oz in (12kg.cm) @ 4.8V, 199.97 oz in (14.4kg.cm) @ 6V COMMENTS This servo directly replaces the HS705MG servo from Hitec.

869,-

899,-

-3%

Hitec HS-77BB Low-Profile Ball Bearing Servo U

Art.nr: 31077S

Copied

This is a low profile aileron servo designed to fit in the wing itself. This allows the use of two aileron servos for more precision. Comes with a Universal Futaba J, Hitec S, JR and Airtronics Z Connector. FEATURES: One ball bearing on the output shaft One internal metal gear (NOT THE OUTPUT GEAR, it is nylon) Water tight SPECS: Dimensions: 44x23x25mm (1.7x0.9x1.0") Weight: 35 grams (1.23oz) Speed: .18sec/60° @4.8V .14sec/60° @6.0V Torque: 61.1 oz-in @4.8V, 76.3 oz-in @6.0V

419,-

Hovedbilde Hitec HS-7940TH HV Digital HS Titanium Coreless 2BB

Hitec HS-7940TH HV Digital HS Titanium Coreless 2BB

Art.nr: 37940S

Copied

This is the HS-7940TH High Speed, High Torque Digital Servo from Hitec. FEATURES: Ideal for larger helicopters and cars needing high speed and plenty of torque Coreless motor for precise centering and accuracy G2 programmable digital circuit, programmable features include; Dead Band Width Speed (reduction) Fail Safe Position Direction (CW/CCW) Fail Safe On/Off End Points Overload Protection Resolution High/Low Titanium gears don't break or develop slop like conventional metal gears Capable of operating on two LiPo packs INCLUDES: HS-7940TH High Speed, High Torque Digital Servo REQUIRES: Installing in model and connecting to control linkage and receiver SPECS: Size: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm) Weight: 2.40oz (68g) 6.0V 7.4V Speed: 0.07 sec 0.06 sec Torque: 181 oz/in (13.0kg/cm) 222 oz/in (16.0kg/cm) Drivetrain Type: Dual ball bearing COMMENTS: This servo can be programmed with any Hitec digital servo programmer. However, the Overload Protection and Resolution High/ Low can only be programmed with the HFP-20, HPP-21 or the HPP-21+ A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

1.595,-

1.795,-

-11%

Hovedbilde Hitec HS-7945TH HV Multipurpose Titanium Coreless ...

Hitec HS-7945TH HV Multipurpose Titanium Coreless ...

Art.nr: 37945S

Copied

This is the HS-7945TH High Volt, Mega Torque, Metal Gear Servo from Hitec. FEATURES: Ideal for high performance aircraft, cars, trucks and larger nitro and electric helicopters where high speed and high torque are needed 7.4V optimized coreless motor designed to be powered from a 2S LiPo battery for extra speed and power (may also be powered by conventional NiCds) Durable titanium alloy metal gears with dual ball bearing output shaft (MK first gear) Programmable features include; Dead Band Width, Rotation Direction, Rotation Speed, End Points/Neutral Points, Fail Safe On/Off, Fail Safe Point, Resolution and Overload Protection (requires Hitec programmer HFP20, HPP20 or HPP21) Eight O-rings for water, dust and fuel resistance Heatsink case INCLUDES: HS-7945TH High Volt Mega Torque Metal Gear Servo with Connector, 1.8" (45mm) round horn, 1.2" (27mm) single arm, 2.3" (59mm) double arm, 2.8" (72mm) double arm, 1.3" (33mm) single arm, 0.87" (22mm) aluminum single arm, mounting hardware and instruction sheet REQUIRES: Installing in model and connecting linkage SPECS: Motor Type: Coreless (7.4V wind) Bearing Type: Dual ball bearing Speed: 6.0V, 0.12 sec/60° 7.4V, 0.10 sec/60° Torque: 6.0V, 250 oz-in (18.0 kg-cm) 7.4V, 319 oz-in (23 kg-cm) Size: 1.57 x 0.79 x 1.5" (39.88 x 20.07 x 38.10mm) Weight: 2.40oz (68g) COMMENTS: A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

1.595,-

1.795,-

-11%

Hovedbilde Hitec HS-7950TH HV Digital Ultra Torque Coreless TG

Hitec HS-7950TH HV Digital Ultra Torque Coreless TG

Art.nr: 37950S

Copied

Hitec Digital HS-7950TH for 7,4V. Digital servo fra Hitec hvor du kan bruke 2celler lipo direkte til servoen uten regulator. Meget sterk servo som leveres med titanium alloy metal gears, med 2 kulelager. Husk å sjekk at din mottaker takler 7,4V uregulert. Speed: 0,15sec/60grader på 6V, 0,13sec på 7,4V Torque: 29kg-cm på 6V, 35kg-cm på 7,4V Weight: 68gram Size: 40x20x38mm This is the HS-7950TH High Speed, Ultra Torque Digital Servo from Hitec. FEATURES: Ideal for giant scale planes, monster trucks and rock crawlers Coreless motor for precise centering and accuracy G2 programmable digital circuit, programmable features include; Dead Band Width Speed (reduction) Fail Safe Position Direction (CW/CCW) Fail Safe On/Off End Points Overload Protection Resolution High/Low Titanium gears that don't break or develop slop like conventional metal gears Capable of operating on two LiPo packs INCLUDES: HS-7950TH High Speed, Ultra Torque Digital Servo with 1" (25.5mm) single arm horn, 1" (21.5mm) aluminum single arm horn, 0.85" (32mm) heavy duty single arm horn, 2.8" (72mm) heavy duty double arm horn, 2.3" (59mm) double arm horn, 1.8" (45mm) round horn, four eyelets, four rubber grommets, four 2x15mm mounting screws and instruction sheet REQUIRES: Installing in model and connecting to control linkage and receiver SPECS: Size: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm) Weight: 2.40oz (68g) 6.0V 7.4V Speed: 0.15 sec 0.13 sec Torque: 403 oz/in (29kg-cm) 486 oz/in (35kg-cm) Drivetrain Type: Dual ball bearing COMMENTS: This servo can be programmed with any Hitec digital servo programmer. However, the Overload Protection and Resolution High/ Low can only be programmed with the HFP-20, HPP-21 or the HPP-21+ A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

1.759,-

1.995,-

-12%

Hovedbilde Hitec HS-7954SH High Voltage Ultra Torque Dual BB ...

Hitec HS-7954SH High Voltage Ultra Torque Dual BB ...

Art.nr: 37954S

Copied

This is the HS-7954SH High-Voltage Ultra Torque Digital Servo from Hitec. FEATURES: Ideal for giant scale planes, large helicopters, rock crawlers, monster trucks, 1/8 scale trucks and buggies and anywhere a high performance, high torque servo is needed Coreless motor for precise centering and accuracy G2 programmable digital circuit, programmable features include; Dead Band Width Speed (reduction) Fail Safe Position Direction (CW/CCW) Fail Safe On/Off End Points Overload Protection Resolution High/Low Steel gears for much longer life than conventional metal gears Nine O-rings for extra resistance to moisture and dust Capable of operating on two cell LiPo packs INCLUDES: HS-7954SH High-Voltage Ultra Torque Servo, 1.8" (45mm) diameter round horn, 2.3" (59mm) long double sided horn, 2.8" (72mm) long double sided horn, 1.3" (34mm) single sided horn, 0.83" (21mm) single sided aluminum horn, 0.98" (25mm) single sided horn, four each grommets, eyelets and mounting screws, instruction sheet REQUIRES: Installing in model and connecting to control linkage and receiver SPECS: Size: 1.57 x 0.78 x 1.45" (40 x 20 x 37mm) Weight: 2.30oz (65.2g) 6.0V 7.4V Speed: 0.15 sec 0.12 sec Torque: 333 oz/in 403 oz/in Wire Size: 22 gauge twisted wire with gold plated connectors Drivetrain Type: Dual ball bearing COMMENTS: This servo can be programmed with any Hitec digital servo programmer. However, the Overload Protection and Resolution High/ Low can only be programmed with the HFP-20, HPP-21 or the HPP-21+

1.495,-

1.595,-

-6%

Hovedbilde Hitec HS-7955TG Digital HT Titanium Gear Coreless ...

Hitec HS-7955TG Digital HT Titanium Gear Coreless ...

Art.nr: 37955S

Copied

Hitec HS-7955TG Digital HT Titanium Gear Coreless Servo This is a Hitec Digital, High Speed, High Resolution, Metal Gear Programmable Servo. FEATURES: Coreless motor Ideal for large airplane models Gold plated contacts Titanium gears Dual ball bearings High speed Water and dust resistant INCLUDES: Digital high speed servo with 12" wire and universal connector. 2" servo arm Blue anodized aluminum 1" servo arm Heavy duty 1-1/2" servo arm Heavy duty 2-3/4" servo arm Black disc servo horn Four 2 x 14mm mounting screws Four brass eyelets Four black rubber vibration isolators Plastic case and programming instruction sheet Hitec decals REQUIRES: Radio system SPECS: Speed: 0.19 sec/60 degrees at 4.8V 0.15 sec/60 degrees at 6.0V Torque: 249.96 oz-in (18 kg-cm) at 4.8V 333.29 oz-in (24.0kg-cm) at 6.0V Length: 1.57" (40mm) Width: 0.78" (20mm) Height: 1.45" (37mm) Weight: 2.29oz (65g) COMMENTS: A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

1.495,-

1.595,-

-6%

Hovedbilde Hitec HS-7980TH Digital Mega Torque HV TG Coreless

Hitec HS-7980TH Digital Mega Torque HV TG Coreless

Art.nr: HS-7980TH

Copied

Hitec HS-7980TH Digital Mega Torque HV TG Coreless This is the HS-7980TH Monster Torque Coreless Motor, Titanium Gear Servo from Hitec. FEATURES: For use in high performance giant scale aircraft, 1/8 scale truggies, buggies, monster trucks, large aircraft, fast power boats and any other application requiring 600+ oz/in of torque High resolution "G2.5" 12 bit generation programmable digital circuit, programmable features include; Dead Band Width Rotation Direction & Speed End Points Neutral Point Fail Safe On/Off Fail Safe Point Resolution* Overload Protection* *These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers Designed to operate on a two cell LiPo Pack 7.4V optimized coreless motor Titanium gear train (MK first gear) Integrated heatsink case with eight O-rings to protect against dust dirt and fuel INCLUDES: HS-7980TH Monster Torque Servo with assorted round, double and single arm servo horns, mounting hardware and programming instruction sheet REQUIRES: Porgramming, installing in application and connecting control linkage SPECS: 6.0V 7.4V Speed: 0.20 sec 0.17 sec Torque: 500 oz/in (38 kg/cm) 611 oz/in (46 kg/cm) Dimensions: 1.72 x 0.88 x 1.57" (43.69 x 22.35 x 39.8mm) Weight: 2.70oz (76.54g)

2.195,-

2.395,-

-8%

Hovedbilde Hitec HS-7985MG Digital High Torque Metal Gear ...

Hitec HS-7985MG Digital High Torque Metal Gear ...

Art.nr: 37985S

Copied

This is a Hitec Digital, High Speed, High Resolution, Metal Gear Programmable Servo. FEATURES: Coreless motor Ideal for high performance aircraft to 1/4 scale, .30 and larger helicopters, and steering and throttle for 1/10 and 1/8 scale vehicles Gold plated contacts Metal gears Dual ball bearings High speed Water and dust resistant INCLUDES: Digital high speed servo with 12" wire and universal connector 2" servo arm Heavy duty 1-1/2" servo arm Heavy duty 2-3/4" servo arm Black disc servo horn Four 2 x 14mm mounting screws Four brass eyelets Four black rubber vibration isolators Plastic case and programming instruction sheet Hitec decals REQUIRES: Radio system SPECS: Speed: 0.16 sec/60 degrees at 4.8V 0.13 sec/60 degrees at 6.0V Torque: 144.42 oz-in at 4.8V (10.4 kg-cm) 172.20 oz-in at 6.0V (12.4kg-cm) Length: 1.57" (40mm) Width: 0.78" (20mm) Height: 1.45" (37mm) Weight: 2.18oz (62g) COMMENTS: A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

869,-

1.069,-

-19%

Hovedbilde Hitec HS-805MG Mega Metal Gear Servo

Hitec HS-805MG Mega Metal Gear Servo

Art.nr: 805MG

Copied

Dette er servo til 1/5 skala biler. 1/5 scale. This is the HS-805MG Analog Mega Scale Servo from Hitec. FEATURES: Dual ball bearings Durable metal gears Heavy duty horn and hardware set Water and dust resistance INCLUDES: One HS-80MG Mega Scale Servo with Preinstalled Round Servo Horn One Y-Harness Four Rubber Grommets Four Brass Eyelets Four 2x15mm Flanged Button Head Screws One One-Armed Servo Horn One X-Shaped Servo Horn SPECS: Operating Speed: 0.19sec/60° at 4.8V 0.14sec/60° at 6.0V Output Torque: 19.8kg-cm (275oz-in) at 4.8V 24.7kg-cm (343oz-in) at 6.0V Weight: 197g (6.95oz) Size: 66 x 30 x 57.6mm (2.59" x 1.18" x 2.26") COMMENTS: Must be used with at least a 1200mAh NiCd/NiMH Battery (5-6 cells) Power must be fed directly to the servo without going through the B.E.C. regulator

947,-

Hovedbilde Hitec HS-81 Standard Micro Servo U

Hitec HS-81 Standard Micro Servo U

Art.nr: 31081S

Copied

This is a Hitec HS-81S Micro Servo with a Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Connector is compatible with all modern receivers and wiring accessories FEATURES: Compact, Lightweight Design-Ideal for Electric Airplanes and Sailplanes Strong, Dependable Gear Train High Torque and High Speed Mounts with Two Screws INCLUDES: One HS-81S Micro Servo with 6-3/4" connector wire. One 7/8"x7/8" X-shaped servo horn One 1-1/8" long straight servo horn Two brass eyelets Two mounting screws Two servo grommets One servo horn screw REQUIRES: Radio system. SPECS: Transit Speed: 0.11 sec/60° @ 4.8V 0.09 sec/60° @ 6.0V Output Torque: 36.10 oz-in @ 4.8V (2.6 kg-cm) 41.66 oz-in @ 6.0V (3 kg-cm) Length: 1.17" (29.8mm) Width: 0.47" (12mm) Height: 1.16" (29.6mm) Weight: 16.6g (0.58oz) Mounting holes on-center: 1.31"(33.27mm)

269,-

299,-

-10%

Hovedbilde Hitec HS-815BB Mega Sail Arm Control Servo U

Hitec HS-815BB Mega Sail Arm Control Servo U

Art.nr: 31815S

Copied

This is in extremely powerful sail winch servo, with dual ball bearings and Hitec S type connector. Connector is compatible with all modern receivers and wiring accessories SPECS: Indirect drive motor Water tight case Transit time .46 seconds/140° Torque 231 oz-in DIMENSIONS: 66x30x56.7mm, 2.59x1.18x2.23" (L,W,H) INCLUDES: Servo mounting screws, grommets, and eyelets 1 each of the following servo arms. Large wheel, large X, and large straight arm. 1 sail arm, 122mm overall length, 110mm center of mount to outside hole. Special Y- harness for use with BEC receivers (see comments) COMMENTS: This servo consumes 800mAh UNLOADED, Hitec states that it REQUIRES a minimum of 1200mA receiver battery, 6V (5 cell) is STRONGLY recommended. If connecting to a BEC receiver, the Rx battery must be plugged in to one side of the supplied Y harness, the servo into the other side, and then connected to the receiver. IT WILL NOT WORK IF RUN WITH A BEC RX CONNECTED IN ANY OTHER WAY!!!!! Standard Rx's connect as normal

699,-

729,-

-4%

Hovedbilde Hitec HS-82MG Standard Metal Gear Micro Servo

Hovedbilde Hitec HS-82MG Standard Metal Gear Micro Servo

Hitec HS-82MG Standard Metal Gear Micro Servo

Art.nr: 32082S

Copied

Hitec HS-82MG Standard Metal Gear Micro Servo This is the HS-82MG Metal Gear Micro Servo from Hitec. FEATURES: For small planes, gliders, electric helicopters and 1/18 scale cars INCLUDES: HS-82MG Metal Gear Micro Servo with universal connector, 0.67" (17mm) diameter horn, 1.1" (29mm) double arm, 0.90" (23mm) 4-point horn and mounting hardware REQUIRES: Installing in model and connecting to receiver SPECS: Speed: 0.12 sec/60° at 4.8V 0.10 sec/60° at 6.0V Torque: 38.88oz-in (2.8kg-cm) at 4.8V 47.22oz-in (3.4kg-cm) at 6.0V Weight: 0.66oz (19.0g) Size: 1.17 x 0.47 x 1.16" (29.8 x 12.0 x 29.6mm)

419,-

459,-

-9%

Hovedbilde Hitec HS-8330SH HV Hi Res High Speed Steel Gear

Hitec HS-8330SH HV Hi Res High Speed Steel Gear

Art.nr: 38330

Copied

We proudly announce new Hitec's High Response, High Resolution series servos. HS-8330SH, HS-8335SH perform same as our Ultra premium HS-8360/70/80TH series servos that have durable steel gears and light weight street price. The rapid-fire response and decisive action of each servo will elevate your hobby to an entirely new level, whether you are tearing it up with your 1/10th scale on/off-road vehicle or your 600/700-size electric/gas-powered helicopter. Features: - High Voltage, High Response Digital Servo - Durable Steel Gears with Dual Ball Bearings - Ultra Hardness Gear Shaft with 3 Axial Metal Bushings - Heat sink for Motor - Water & Dust Resistant - 3mm Horn Screw ( '+' & HEX Socket Screw Included) - Non Programmable - Applied H25T Horn Gear Vekt: 66g Hastighet: 0.07s Dragkraft: 13.0kg 7.4v Mål: 40 x 20 x 37mm Drev: Stål Kulelager: 2stk/pcs

895,-

995,-

-10%

Viser 26 til 50 (av 64 produkter)