Traxxas

Servoer Hitec

Populært i denne kategorien

Hovedbilde Hitec 32070 HS-70MG Micro Analog Ultra Torque Metal ...

Hitec 32070 HS-70MG Micro Analog Ultra Torque Metal ...

Art.nr: 32070

Copied

Servo i “Feather” størrelse. Nesten 1 Kg / cm mer kraft enn HS–65mg.Dette er Hitec sin økonomiutgave av HS-65mg. Driftsspenning :4,8 til 6,0 V Kraft Kg /cm på 4,8V :2,3 Kg Kraft Kg / cm på 6,0V :3,0 Kg Hastighet ved 4,8V :0,17 sec/60 ° Hastighet ved 6,0V :0,14 sec/60 ° Mål :23,6 x 11,6 x 28,9 mm

449,-

Hovedbilde Hitec 33785S HS-785HB 3.5 Turn Sail Winch

Hitec 33785S HS-785HB 3.5 Turn Sail Winch

Art.nr: 33785S

Copied

This is the Hitec HS-785HB Sail Winch Servo with Hitec connectors for use in sail boat applications. FEATURES Karbonite gears Ball bearing Water and dust tight INCLUDES One HS-785HB sail winch servo with Hitec connector One winch servo drum Mounting hardware REQUIREMENTS Nothing SPECIFICATIONS Length: 2.32" (59mm) Width: 1.14" (29mm) Height: 1.96" (50mm) Weight: 3.88oz (110g) Speed: 1.68 sec/60° @ 4.8V 1.38 sec/60° @ 6V Torque: 152.75 oz-in (11 kg-cm) @ 4.8V and 183.31 oz-in (13.2 kg-cm) @ 6V Current (at idle): 8mA (6.0V) Current (running): .230mA (6.0V and load) COMMENTS This servo is larger than standard size servo. Its size is equal to that of 1/4 scale servo.

649,-

729,-

-11%

Hovedbilde Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...

Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...

Art.nr: 35565S

Copied

This is the Hitec HS-5565MH High Voltage, High Speed Digital Servo. FEATURES Ideal for 1/10 scale touring cars, buggies and short course vehicles, helicopters up to .90 size, and sport to high performance aircraft up to 25 percent Heavy duty metal gears and dual ball bearings Coreless motor INCLUDES HS-5565MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and Instructions SPECIFICATIONS Operating Voltage: 6.0 - 7.4V DC 6.0V 7.4V Speed: 0.11 sec/60° 0.09 sec/60° Torque: 153 oz-in (11 kg-cm) 194 oz-in (14 kg-cm) Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 37.8mm) Weight: 2.10oz (60g) Wire Length: 11.8" (30mm) Wire Gauge: 25AWG Operating Temperature Range: -4 to 140°F Idle Current: 4mA Stall Current: 2100mA @ 6.0V, 2700mA @ 7.2V Potentionmeter Type: 4 slider 1M cycle COMMENTS A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

995,-

1.095,-

-9%

Hovedbilde Hitec 41920 Standard Heli Gyro Pack HG-5000/HSG-5083MG ...

Hitec 41920 Standard Heli Gyro Pack HG-5000/HSG-5083MG ...

Art.nr: 41920

Copied

This is the Hitec HG-5000 Micro Heading Lock Gyro and HSG-5083MG Micro Digital Tail Rotor Servo. FEATURES Gyro Features; Optimized high response narrow band Hitec signal Universal signal selectable, functions with both analog and digital servos Auto detection for any transmitter and receiver Precision control technology for heading lock Remote gain adjustment Self diagnosis function Low power consumption (20mA) Extreme tolerance against disturbance and vibration Easy data setting and simple LED display Micro Digital Servo Optimized for 400-600 class EP helicopters All metal gear applied (1st MP gear) Non-programmable INCLUDES Hitec HG-5000 Micro Heading Lock Gyro and HSG-5083MG Micro Digital Servo, instructions REQUIREMENTS Assembly and adjustment onto the helicopter SPECIFICATIONS Gyro; Size: 0.86 x 0.86 x 0.43" (22 x 22 x 11mm) Weight: 0.35oz (9.9g) Power Consumption: 20mA Micro Digital Servo; Size: 1.14 x 0.51 x 1.18" (29 x 13 x 30mm) Weight: 0.74oz (21g) Torque: 20.85 oz.in @ 4.8V Speed: 0.07 sec/60° @ 4.8V

695,-

895,-

-22%

Hovedbilde Hitec D-625MW Servo

Hitec D-625MW Servo

Art.nr: 36625

Copied

Product Description The metal D-625MW is part of our D-Series dynamo servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market Motor Type: 3 Pole Bearing Type: Dual Ball Bearing Speed (4.8V / 6.0V / 7.4V): 0.20 / 0.15 / 0.13 sec/60º Torque kg-cm (4.8V / 6.0V / 7.4V): 6.3 / 8.8 / 10.0 kg-cm Size in Millimeters: 40.6 x 19.8 x 37.8 mm Weight g: 59.8 g

599,-

649,-

-8%

Hovedbilde Hitec D-645MW Servo

Hitec D-645MW Servo

Art.nr: 36645

Copied

Product Description The metal D-645MW is part of our D-Series dynamo servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market. Specifications Motor Type: 3 Pole Bearing Type: Dual Ball Bearing Speed (4.8V / 6.0V / 7.4V): 0.28 / 0.20 / 0.17 sec/60º Torque kg-cm (4.8V / 6.0V / 7.4V): 8.3 / 11.4 / 13.0 kg-cm Size in Millimeters: 40.6 x 19.8 x 37.8 mm Weight g: 59.8 g

599,-

679,-

-12%

Hovedbilde Hitec D-941TW Servo

Hovedbilde Hitec D-941TW Servo

Hitec D-941TW Servo

Art.nr: 36941

Copied

Product Description: Your ultimate RC weapon is ready. Hitec’s industry-leading technology has created a performance monster – our new D series servos. We developed these servos to satisfy the RC enthusiast seeking ultra response and flexible programming. Through our 32-bit MCU and 12-bit ADC, these servos allow you to realize your true potential with readily accessible programming and a wide voltage functionality which supports 4.8~7.4V (Li-Po 2 cell compatible) operation using any power source. Realize maximum performance with our D series Servos! Powered by Hitec’s new 32-bit MCU and 12-bit ADC technology, these servos provide the best programmable response ever seen within the hobby industry. Hitec’s first Wide Voltage capability supports all types of receiver batteries, from 4.8 to 7.4 volts.(Li-Po 2cell Compatible) Specification: ULTRA SPEED 4.8V Torque : 10.0kg.cm 4.8V Speed : 0.11 sec/60º 6.0V Torque : 13.5kg.cm 6.0V Speed : 0.08sec/60º 7.4V Torque : 16.5kg.cm 7.4V Speed : 0.07sec/60º Operation Voltage : DC 3.5~8.4V Dimensions : 40 x 20 x 38 mm Weight : 80g

1.795,-

1.995,-

-10%

Hovedbilde Hitec D-945TW Servo

Hovedbilde Hitec D-945TW Servo

Hitec D-945TW Servo

Art.nr: 36945

Copied

Product Description The titanium D-945TW is part of our D-Series dynamo servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market. Specifications Motor Type: Coreless Bearing Type: Dual Ball Bearing Speed (4.8V / 6.0V / 7.4V): 0.16 / 0.12 / 0.10 sec/60º Torque kg-cm (4.8V / 6.0V / 7.4V): 14.0 / 18.0 / 23.0 kg-cm Size in Millimeters: 39.9 x 20.1 x 38.1 med mer Weight g: 68.0 g

1.695,-

1.895,-

-11%

Hovedbilde Hitec D840WP 32-Bit, Multi Purpose, Waterproof, Steel ...

Hovedbilde Hitec D840WP 32-Bit, Multi Purpose, Waterproof, Steel ...

Hitec D840WP 32-Bit, Multi Purpose, Waterproof, Steel ...

Art.nr: 36840

Copied

25 tooth HD output spline Hitec D840WP 32-Bit, Multi Purpose, Waterproof, Steel Gear Servo The steel D-840WP is part of our D-Series dynamo servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s 25 tooth HD output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market. D840WP Servo Specifications Performance Specifications Operating Voltage Range (Volts DC) 4.8V ~ 6.0V ~ 7.4V Speed (Second @ 60°) 0.17 ~ 0.14 ~ 0.11 Maximum Torque Range oz. / in. 265 ~ 335 ~ 419 Maximum Torque Range kg. / cm. 19.0 ~ 24.0 ~ 30.0 Current Draw at Idle 30 mA No Load Operating Current Draw 1,600 mA Stall Current Draw 9,000 mA Dead Band Width 2 µs Physical Specifications Dimensions (Inches) 2.59 x 1.26 x 2.44 Dimensions (Metric) 66 x 32 x 62 Weight (Ounces) 8.0 Weight (Gram) 227.0 Circuit Type Digital Amplifier with Mosfet Drive Motor Type 5 Poles Cored Metal Brush Gear Material Steel Bearing Type Dual Ball Bearing Output Shaft (type / Ømm) Mega 15 Case Material Plastic / Aluminum Dust / Water Resistance IP 67 Connector Gauge (AWG) / Strand Count 25 / 80 Radio Control Applications Parkflyer N / A Sport Plane N / A Sailplane N / A 3D Performance N / A Scale > 40% Electric Helicopter N / A Gas Helicopter N / A On Road 1/4th & 1/5th Monster Truck 1/4th & 1/5th Buggies 1/4th & 1/5th Truggies 1/4th & 1/5th Short Course / Truck 1/4th & 1/5th Crawlers N / A Sail Boat = >1M & Scale Power Boat 1/5th & Up Scale

1.549,-

1.649,-

-6%

Hovedbilde Hitec HS-225BB Mighty Mini BB Servo U

Hitec HS-225BB Mighty Mini BB Servo U

Art.nr: 31225S

Copied

This is the Hitec/RCD #31225S HS-225BB Mighty Mini Ball Bearing Servo with Futaba J, Hitec/JR/Airtronics Z style connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES: Mini servo with ball bearing and plastic gears Great for small planes and hand launch gliders. INCLUDES: 1 HS-225BB servo with pre-installed circular horn 1 Straight horn 1 "X" horn 1 Adjustable arm 4 Black rubber grommets 4 Brass servo eyelets 4 Servo mount screws SPECIFICATIONS: Length- 32.4mm (1.3") Weight- 27g (0.95oz) Width - 16.8mm (0.7") Torque- 3.9 kg-cm (56.4 oz-in) Height- 30.8mm (1.2") Speed - 0.14 sec/60°

299,-

329,-

-9%

Hovedbilde Hitec HS-225MG Mighty Mini Metal Gear BB Servo U

Hitec HS-225MG Mighty Mini Metal Gear BB Servo U

Art.nr: 32225S

Copied

This is the HS-225MG Precision Mini Servo from Hitec. This version has the Universal S/Z/JR, Futaba J Connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES Lightweight and small; ideal for sailplane or weight-sensitive applications Ball bearing Metal Gears Indirect drive Hybrid/ Circuit INCLUDES One HS-225MGS metal gear micro servo Four screws, grommets, and eyelets Three servo arms and one wheel SPECIFICATIONS L: 32.4mm x W: 16.8mm x H: 30.8mm (1.27" x 0.66" x 1.21") Transit: 0.14sec/60° (4.8V) 0.11sec/60° (6.0V) Torque @ 4.8V: 3.9 kg-cm, (54.2 oz-in) @ 6.0V: 4.8 kg-cm, (66.7 oz-in) Weight: 31g (1.09oz)

489,-

529,-

-8%

Hovedbilde Hitec HS-311 Servo Standard U

Hitec HS-311 Servo Standard U

Art.nr: 31311

Copied

This is a Hitec servo that will work with all modern radio systems including Futaba J, Hitec, JR and Airtronics Z. FEATURES Heavy-duty resin gear train Nylon bushing 3-pole ferrite motor INCLUDES One Deluxe Standard servo with nylon bushing. One white small X-shaped servo horn. One white adjustable servo horn. One white offset straight servo horn. One red X-shaped heavy-duty servo horn. Four brass eyelets. One white plastic wheel servo horn. Four black rubber vibration isolators. Four M2x14 mounting screws REQUIREMENTS Universal Futaba J, S/JR/Airtronics Z plug compatible radio system SPECIFICATIONS Speed: 0.19 sec/60° at 4.8V Speed: 0.15 sec/60° at 6.0V Torque: 3.0 kg-cm at 4.8V Torque: 3.7 kg-cm at 6.0V Length: 1.60" (41mm) Width: 0.80" (20mm) Height: 1.40" (37mm) Weight: 1.5oz (43g) NOTE: This is a non-ball bearing servo.

209,-

219,-

-5%

Hovedbilde Hitec HS-325HB Standard Karbonite Gear BB Servo U

Hitec HS-325HB Standard Karbonite Gear BB Servo U

Art.nr: 33325S

Copied

This is the Hitec standard size Ball Bearing Servo with the Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES: NEW Heavy-duty resin gear train Ball bearing 3-pole ferrite motor INCLUDES: One Deluxe Standard servo with nylon bushing One white small X-shaped servo horn. One white adjustable servo horn. One white offset straight servo horn. One white wheel servo horn Four brass eyelets Four black rubber vibration isolators. Four 2 x 14mm mounting screws REQUIRES: Radio system SPECS: Speed: 0.19 sec/60° @ 4.8V Speed: 0.15 sec/60° @ 6.0V Torque: 42.00 oz-in @ 4.8V Torque: 51.00 oz-in @ 6.0V Length: 1.6" (41mm) Width: 0.8" (20mm) Height: 1.4" (37mm) Weight: 1.7oz (48g)

289,-

319,-

-9%

Hovedbilde Hitec HS-40 Economy Nano Servo

Hitec HS-40 Economy Nano Servo

Art.nr: 31040

Copied

This is the Hitec HS40 Economy Nano Servo. FEATURES Ideal for micro airplane, sailplane, and helicopters Slightly larger than the Hitec HS-35HD servo High impact nylon gears Coreless motor Long life potentiometer INCLUDES HS40 Servo with 0.67" (17mm) 4-point horn, 2.2" (55mm) Double Arm Horn, 1.2" (31mm) Double Arm Horn, 1.1" (28mm) Double Arm Horn extra Servo Horn Screw, Two 1.5x7mm Mounting Screws SPECIFICATIONS 4.8V Speed: 0.09 sec/60° Output Torque: 0.6kg/cm (8.4oz/in) Weight: 4.8g (0.17oz) Size: 0.79 x 0.34 x 0.67" (20 x 8.6 x 17mm)

239,-

259,-

-8%

Hovedbilde Hitec HS-422 Standard Deluxe Servo U

Hitec HS-422 Standard Deluxe Servo U

Art.nr: 31422S

Copied

This Servo is used for Standard Applications with a Universal Futaba J, Hitec S, JR and Airtronics Z Connector. FEATURES: Higher Torque than other Standard Servos. Dual Oilite Bearings Good for Cars or Airplanes INCLUDES: One HS-422S Servo w/Universal Connector One Servo Accessory Bag SPECS: Length: 41mm (1.6") Weight: 45.5g (1.605oz) Width: 20mm (0.8") Torque: 3.1 kg-cm (43.4 oz-in) Height: 36.5mm (1.4") Speed: 0.20 sec/60°

259,-

279,-

-7%

Hovedbilde Hitec HS-430BH Standard Deluxe BB HV Servo

Hitec HS-430BH Standard Deluxe BB HV Servo

Art.nr: 31430S

Copied

This is the Hitec HS-430BH Standard Deluxe High Voltage Servo. FEATURES: For .20-.60 size airplanes, all electric and glow powered 30 class helicopters, and steering and throttle in cars, trucks and boats 6-cell NiMH and 2-cell LiPo compatible Dual ball bearing equipped Direct potentiometer drive INCLUDES: Hitec HS-430BH Servo, 0.92" (23.5mm) Round Horn, 1.2" (30mm) 4-Point Horn, 1.7" (43mm) 4-Point Horn, 1.2" (32mm) Double Arm Horn, 1.2" (30.5mm) Single Arm Horn and Mounting Hardware REQUIRES: Installing in model and connecting linkage SPECS: 6V 7.4V Operating Speed: 0.16 sec/60° 0.14 sec/60° Output Torque: 56.93oz-in (4.1kg-cm) 69.43oz-in (5.0kg-cm) Weight: 1.6oz (45.5g) Size: 1.59 x 0.77 x 1.44" (40.6 x 19.8 x 36.6mm)

279,-

299,-

-7%

Hovedbilde Hitec HS-485HB Deluxe HD BB Karbonite Gear Servo

Hitec HS-485HB Deluxe HD BB Karbonite Gear Servo

Art.nr: 33485S

Copied

This is the HS-485HB Premium Standard Servo from Hitec. FEATURES: Ideal for 1/10 scale vehicle steering and throttle applications, .20- .60 class aircraft, boats and all EP and GP .30-.50 class helis Karbonite gear train that is four times stronger than standard plastic gears Three pole motor and single ball bearing output shaft INCLUDES: HS-485HB Premium Standard Servo, 0.94" (24mm) diameter round horn, 1.2" (31mm) diameter 4-point horn, 1.3" (34mm) double arm horn, 1.2" (30.5mm) single arm horn, four each rubber grommets, eyelets and mounting screws, universal connector REQUIRES: Installing in model and connecting to control linkage and receiver SPECS: Size: 1.57 x 0.78 x 1.49" (40 x 20 x 38mm) Weight: 1.59oz (45g) 4.8V 6.0V Speed: 0.20 sec 0.17 sec Torque: 5.2 kg/cm 6.4 kg/cm Drivetrain Type: Top ball bearing

379,-

Hovedbilde Hitec HS-5055MG Economy Digital Metal Gear Feather

Hitec HS-5055MG Economy Digital Metal Gear Feather

Art.nr: 35055S

Copied

This is the HS-5055MG Sub Micro Digital Feather Servo from Hitec. FEATURES: Programmable Overload protection Metal gears Lightweight Ideal for park flying models, indoor planes, small glider, and micro electric helis INCLUDES: One Hitec HS-5055MG Micro Digital Feather Servo with preinstalled small X-shaped servo horn and screw One 28mm straight servo arm One 31mm servo arm One 54mm servo arm One 1.6x3.75mm button head screw Two 1.7x8mm flanged button head screws SPECS: Speed: 0.20sec/60° at 4.8V 0.17sec/60° at 6V Output Torque: 1.3kg-cm (18.05oz-in) at 4.8V 1.6kg-cm (22.20oz-in) at 6V Weight: 9.5g (0.33oz) Size: 22.8 x 11.6 x 24mm (0.89 x 0.45 x 0.94in)

399,-

469,-

-15%

Hovedbilde Hitec HS-5056MG

Hitec HS-5056MG

Art.nr: 5056MG

Copied

The HS-5056MG Premium Digital Feather Servo is the perfect choice for larger indoor R/C, hand launch gliders, small electric Park flyers, and can handle the duties of smaller electric 3D aerobatic aircraft as well. Combined with a programmable digital amplifier, metal gears, and precision components that have been engineered to provide long lasting trouble free service, the HS-5056MG sets the standard for Digital, heavy duty, ultra micro servos. SpecificationsMotor Type:3 PoleBearing Type:Top Ball BearingSpeed (4.8V/6.0V):0.11 / 0.09Torque oz./in. (4.8V/6.0V):21 / 25Torque kg./cm. (4.8V/6.0V):1.5 / 1.8Size in Inches:0.88 x 0.45 x 0.94Size in Millimeters:22.35 x 11.43 x 23.88Weight ounces:0.45Weight grams:12.76 Spare Parts55412 Case Set

335,-

Hovedbilde Hitec HS-5070MH Digital Ultra-Torque Feather Servo

Hitec HS-5070MH Digital Ultra-Torque Feather Servo

Art.nr: 35070

Copied

This is the Hitec HS-5070MG Digital Ultra Torque Feather Servo. FEATURES Ideal for fast park flying models, micro airplanes, MAVs and 1/18 scale R/C cars 7.4V high voltage digital servo 2S LiPo (6-cell NiMH) compatible Four metal gears with one ball bearing Programmable INCLUDES HS-5070MG Digital Ultra Torque Feather Servo, 1.02" (26mm) 4-PointHorn, 1.4" (35mm) Double Arm Horn, 0.79" (20mm) Single Arm Horn Four 1.5 x 17mm Screws SPECIFICATIONS 4.8V 6.0V Speed: 0.15 sec/ 60° 0.17 sec/60° Torque: 43.28oz/in (3.1kg/cm) / 53.06oz/in (3.8kg/cm) Weight: 0.44oz (12.5g) Dimensions: 0.92 x 0.45 x 1.14" (23.6 x 11.6 x 29mm)

527,-

Hovedbilde Hitec HS-5085MG Digital Mighty Micro BB MG Servo

Hitec HS-5085MG Digital Mighty Micro BB MG Servo

Art.nr: 5085MG

Copied

This is the HS-5085MG Mighty Micro Servo from Hitec with Universal Connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES Lightweight and small; ideal for small planes, gliders, electric heli and 1/16, 1/18 cars Metal gears Aluminum output gear Shock protected POT INCLUDES One HS-5085MG mighty micro servo Two screws, grommets and eyelets Two servo arms and one wheel SPECIFICATIONS L: 29mm x W: 13mm x H: 30mm (1.14" x 0.51" x 1.18") Transit: 0.17 sec/60° (4.8V) 0.13 sec/60° (6.0V) Torque @ 4.8V: 3.6 kg-cm, (50.0 oz-in) @ 6.0V: 4.3 kg-cm, (59.71 oz-in) Weight: 21.9g (0.77oz)

589,-

649,-

-9%

Hovedbilde Hitec HS-5086WP Digital Waterproof Metal Gear Top BB

Hitec HS-5086WP Digital Waterproof Metal Gear Top BB

Art.nr: 35086S

Copied

This is the Hitec HS-5086WP Waterproof Digital Micro Servo. FEATURES: All metal gears with dual ball bearings Programmable digital amplifier with MOSFET drive Ideal for 1/8 - 1/14 scale cars and trucks and electric powered boats INCLUDES: HS-5086WP Servo with 1.15" (29.4mm) Two Arm Servo Horn, 0.90" (23mm) Four Point Horn, 0.67" (17mm) Round Horn and Mounting Hardware SPECS: 4.8V 6.0V Speed: 0.18sec/60° 0.15sec/60° Torque: 41.66 oz.in (3.0 kg.cm) 50 oz.in (3.6 kg.cm) Weight: 1.0oz (28.5g) Dimensions: 1.22 x 0.60 x 1.22" (31.0 x 15.2 x 31mm)

769,-

839,-

-8%

Hovedbilde Hitec HS-5087MH HV Premium Metal Gear Micro Servo

Hitec HS-5087MH HV Premium Metal Gear Micro Servo

Art.nr: 35087

Copied

The HS-5087MH digital, metal gear micro servo is the high voltage version of our ever popular HS-5085MG. Built with a 3-pole ferrite motor and heavy-duty metal gears, this servo will bring maximum performance to your hobby and deliver extra power with a 2-cell 7.4V LiPo battery. Whether you are a beginner or an expert in the RC field, our HS-5087MH will provide the strength and capability you need and want in a micro servo. Drivers will find it the perfect steering servo for their 1/16th scale vehicles. Pilots with .15 to .40-size glow and electric aircraft will relish in its power and reliability. Its precision and performance also make it perfect for 500-size helicopters. Features Top Ball Bearing Programmable Digital Circuit Includes Vertical Mounting Hardware Specifications Motor Type: 3 Pole Ferrite Bearing Type: Top Ball Bearing Support Speed (6.0V/7.4V): 0.17 / 0.13 second Torque oz./in. (6.0V/7.4V): 50 / 60 oz-in Torque kg./cm. (6.0V/7.4V): 3.6 / 4.3 kg-cm Size in Inches: 1.14 x 0.51 x 1.18 in Size in Millimeters: 29 x 13 x 30 mm Weight oz.: 0.77 oz. Weight g.: 21.9 g. Spare Parts 56388 Gear Set 56366 Case Set

549,-

Hovedbilde Hitec HS-5485HB Digital Standard Karbonite Gear Servo

Hitec HS-5485HB Digital Standard Karbonite Gear Servo

Art.nr: 35485S

Copied

This is a Hitec Programmable Standard Digital Servo with Hitec "S" Type Connector. FEATURES: Four heavy duty Karbonite gears Top ball bearing Programmable Digital Designed for .20-.60 Airplanes, Steering & Throttle Servo, and Trucks and Boats INCLUDES: One servo with pre-installed round (disk) servo horn Four grommets Four brass eyelets Four round, flanged, phillips head screws 1.5 x 14mm One adjustable servo horn One large X servo horn 1.7" (43mm) end to end One small X servo horn 1.2" (30mm) end to end One straight servo horn 1.3" (33mm) end to end SPECS: Speed: 0.20sec/60 degrees at 4.8V Torque: 5.2 kg-cm (72 oz-in) at 4.8V Length: 39.8mm (1.57") Width: 19.8mm (0.78") Height: 38.0mm (1.49") Weight: 45g (1.59oz)

399,-

Hovedbilde Hitec HS-5496MH Digital High-Voltage Metal Gear Servo

Hitec HS-5496MH Digital High-Voltage Metal Gear Servo

Art.nr: 35496S

Copied

This is the HS-5496MH High Torque, High Volt Metal Gear Servo from Hitec. FEATURES Designed to be powered from a 2-cell 7.4V LiPo battery for extra speed and power Ideal for 1/10 to 1/8 scale on- and off-road vehicles, larger sport helis and large scale aerobatic aircraft up to 25% Programmable features include; Dead Band Width, Rotation Direction, Rotation Speed, End Points/Neutral Points, Fail Safe On/Off, FailSafe Point, (requires Hitec programmer HFP20, HPP20 or HPP21) Heavy duty metal gear train (MK first gear) INCLUDES HS-5696MH High Torque, High Volt Metal Gear Servo with Connector, 0.94" (24mm) round horn, 1.8" (45mm) round horn, 1.7 (44mm) 4-point horn, 0.98" (25mm) single arm horn, 2.3" (59mm) double arm horn, 0.87" (22mm), mounting hardware and instruction sheet REQUIREMENTS Installing in model and connecting linkage SPECIFICATIONS Speed: 6.0V, 0.20 sec/60° 7.4V, 0.17 sec/60° Torque: 6.0V, 88 oz-in (6.0 kg-cm) 7.4V, 99 oz-in (7.2 kg-cm) Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 38mm) Weight: 1.84oz (52g)

599,-

649,-

-8%

Viser 1 til 25 (av 64 produkter)