Handlekurven er tom

Subtotal: 0,-

Hitec HS-7940TH HV Digital HS Titanium Coreless 2BB 37940S
1.595,- 1.795,- -11%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

På lager: 2

 This is the HS-7940TH High Speed, High Torque Digital Servo from Hitec.

FEATURES: Ideal for larger helicopters and cars needing high speed and plenty
            of torque
          Coreless motor for precise centering and accuracy
          G2 programmable digital circuit, programmable features include;
            Dead Band Width            Speed (reduction)
            Fail Safe Position         Direction (CW/CCW)
            Fail Safe On/Off           End Points
            Overload Protection        Resolution High/Low
          Titanium gears don't break or develop slop like conventional metal
          Capable of operating on two LiPo packs

INCLUDES: HS-7940TH High Speed, High Torque Digital Servo

REQUIRES: Installing in model and connecting to control linkage and receiver

SPECS:    Size: 1.57 x 0.79 x 1.50" (40 x 20 x 38mm)
          Weight: 2.40oz (68g)
                   6.0V                         7.4V
          Speed:  0.07 sec                     0.06 sec
          Torque: 181 oz/in (13.0kg/cm)        222 oz/in (16.0kg/cm)
          Drivetrain Type: Dual ball bearing

COMMENTS: This servo can be programmed with any Hitec digital servo
            programmer. However, the Overload Protection and Resolution High/
            Low can only be programmed with the HFP-20, HPP-21
            or the HPP-21+

          A note on coreless motors-a conventional servo motor has a steel core
            armature wrapped with wire that spins inside the magnets. In a
            Coreless design, the armature uses a wire mesh that forms a cup
            that spins around the outside of the magnet. This arrangement is
            much lighter resulting in smoother operation and faster response


Kunder kjøpte også

Trykk Enter for å søke eller Esc for å lukke