Hopp til innhold

Nye produkter

Art.nr: TRX 8960X
Copied
Motor Mount (for optional motor #3481) Maxx Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1) (for installation of #3481 motor into Maxx®) New front and rear motor mounts allow you to install the powerful 3481 Velineon® 6s 2200kV brushless motor in your Maxx®. (3481 motor also requires VXL-6s ESC)

99,-

109,-

KJØP
-9%
Art.nr: TRX 7876
Copied
Traxxas 7876 Tires & wheels, assembled, glued (XRT™ Race black wheels, Sledgehammer® tires, foam inserts) (left & right) Ultra-rugged Sledgehammer tires provides extreme traction and control for a variety of off-road terrain. At 8.4” tall, the Sledgehammer’s increased diameter gives your X-Truck™ a more powerful stance with even higher ground clearance. The tires' open block tread design clears mud and debris for unmatched traction in loose surfaces. Sledgehammer tires come pre-mounted to massive matte black XRT™ wheels with an ultra-tough 8s-rated glue bead for the most extreme high-speed off-road action. Sold as a left and right pair. Fits 24 mm splined hex, front or rear. Accessory part for these models: X-Maxx® XRT™

899,-

999,-

KJØP
-10%
Art.nr: GTP165
Copied
For: 1/10 RC bil Materiale: plast Farge svart Kontrolleres via APP – Bluetooth. Innebygd 58 typer billyd og passer for nesten alle typer RC-biler Inkludert spesifikk lydeffekt Innebygd mange typer lysmodus Fri programmerbar via programvare Innebygd høy effektiv forsterker med liten størrelse og enkel å installere Spesifikasjon: Inngangsspenning: 4,5V – 6V Høyttalerinngangsspenning: 6V – 26V Lydutgangseffekt: Maks 10W Høyttaler størrelse: 80x57x30mm (Kabel lengde 25 cm) Kontrollbord Størrelse: 66.3x44x14.8mm

1.245,-

1.295,-

KJØP
-4%
Art.nr: GTP164EU
Copied
Dette er ett super smart lys og lyd sett for lastebiler, dette settet er beregnet for Amerikanske lastebiler. For Europeiske, se EU version. Det settes enkelt opp med Bluetooth og en telefon.   Beskrivelse: 1. Low voltage beskyttelse: Hvis du slår på denne funksjonen, slås systemet av når hver cellespenning er lavere enn 3,3V. 2. Det er 2 lydeffekter ved sving, og du kan velge hvilken lydeffekt du vil gjennom denne bryteren. Denne funksjonen vil bare tre i kraft når du starter lydsettet på nytt. 3. Den er enkel å betjene og kan oppnå akkurat den effekten du ønsker. spesifikasjoner: Merke: G.T.POWER Varenavn: Lighting and Voice Vibration System PRO Farge svart Driftsspenningsområde: DC7-14V; Maksimal arbeidsstrøm for hver LED: 30mA; Høyttaler: Indre motstand 4Ω; Strøm ≧ 10W Fjernkontroll: Mer enn 4 kanaler ESC-strøm: Maks 30A Størrelse: 102 x 66 x 12mm Vekt: 99g Pakkeinformasjon: Pakningsstørrelse: 215 x 155 x 48 mm Pakkevekt: 569 g Generell boksepakke Pakke inkludert: 1 x Hovedkontrollboks 1 x Fordelings boks 1 x Vibrasjonsmotor 1 x høyttaler 1 x Lys linjer 1 x Bruksanvisning 1 x sett med tilbehør

3.099,-

KJØP
Art.nr: 47489
Copied
ay Out Style! This assembly kit creates a special Black Edition of the legendary Egress R/C buggy, which originally took the world by storm after its 1989 debut, and was then given a further update in 2013. As the name implies, its color scheme is distinctly black-based, with dampers and front uprights switched to dark titanium anodized finishes, and the six-spoke wheels molded in silver to match a body to be painted black.   Shaft-driven 4WD chassis with carbon components This shaft-driven 4WD chassis features a longitudinally-positioned motor and full ball bearings, while carbon fiber upper and lower decks ensure that the model has superb rigidity. Front and rear ball differentials offer excellent reliability and easy maintenance, working in tandem with the built-in center one-way to provide sure-footed movement, and the one-way can be locked if desired. Universal drive shafts feature the same design as those used in TRF series parts, in order to maximize transmission efficiency and minimize wear and tear. 4-wheel double wishbone suspension is supported by four oil dampers equipped with aluminum cylinders, while the front and rear of the model are fitted with stabilizers. Aluminum front uprights offer excellent reliability, and ball bearings in steering linkage arms combine with 2mm thick carbon fiber plate to offer a linear steering response. The Egress also features a brushless motor.   ★The three-piece steering tie-rod has a 2mm carbon fiber plate that helps to keep handling sharp and crisp.   ★Dark titanium anodized uprights and oil damper parts are employed along with efficient universal shafts.   ★Silver color 6-spoke wheels are paired with high-performance hybrid spike tires for a super drive.   ★Lightweight carbon fiber is employed for the 2mm-thickness decks in the rigid double-deck frame.   ★The model uses a midship motor position with one-way bearing on the gear for linear handling feel. *Motor is sold separately.   ★This image shows the rear suspension, which also uses efficient universal drive shafts.       ★Left: Take a closer look at the combination of high-capacity oil dampers and carbon fiber stay. ★Right: Mirrored stickers such as the rear wing slogan give the model that finishing touch.   Specifications ★Length: 430mm, width: 243mm, height: 157mm ★Wheelbase: 275mm ★Tire width/diameter: 32/88mm (front), 40/88mm (rear) ★2mm carbon fiber double deck frame ★Longitudinally-placed motor, shaft-driven 4WD ★Polycarbonate body and undertray ★Front & rear ball diffferentials, center one-way ★3-piece steering tie-rod ★4-wheel independent double-wishbone suspension ★High-capacity oil dampers with aluminum cylinders ★Gear ratio = 8.33:1 ★Type 540 motor and electronic speed controller (ESC) are sold separately.   Separately Required Items ★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

6.195,-

6.795,-

KJØP
-9%
Art.nr: YB6011M/S10
Copied
Yeah Racing RC Ball Bearing (5x8x2.5mm) 10pcs #YB6011M/S10 Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011MS/10) Ball Bearing (5x8x2.5mm) Material: Metal

89,-

99,-

KJØP
-10%
Art.nr: TRX 7812G
Copied
  Body, XRT™, Green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Tamiya PS-paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the kit.

1.295,-

1.395,-

KJØP
-7%
Art.nr: TRX 7812R
Copied
  Body, XRT™, Red (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Tamiya PS-paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the kit.

1.295,-

1.395,-

KJØP
-7%
Art.nr: TRX 7812T
Copied
  Body, XRT™, Orange (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Tamiya PS-paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the kit.

1.295,-

1.395,-

KJØP
-7%
Art.nr: TRX 7812X
Copied
  Body, XRT™, Prographix (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Tamiya PS-paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the kit.

895,-

995,-

KJØP
-10%
Viser 4041 til 4050 (av 14968 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png