Traxxas 920464 TRX-4 Crawler F150 High Trail Black RTR

Art.nr: TRX 92046-4-BLACK

Copied

Traxxas TRX-4 Ford F-150 Ranger XLT Scale & Trail Crawler Hight Trail Edition - BLACK The Traxxas lineup of exciting and capable High Trail TRX-4® models is expanding with the all-new 1979 Ford® F-150® truck. Sporting top-of-the-line Ranger XLT trim, the Ford F-150 High Trail is equipped with a factory-installed Long Arm Lift Kit and stands over an inch taller than our standard height TRX-4. The exceptional all-terrain capability, smooth running drivetrain, and Traxxas Tough® durability drivers expect from TRX-4 are all there. Black roll bar, chrome light housings, longer wheelbase, and slotted aluminum-finish mags complete the authentic, period correct look. High Trail Edition Large 2.2" slotted mag wheels and Canyon Trail tires tame even the most technical trails to extend your scale adventures farther than ever before. The factory-installed Long Arm Lift Kit raises F-150 High Trail™ Edition over an inch taller for superior ground clearance. Extended 336mm Wheelbase F-150’s extended steel ladder frame lengthens the wheelbase to 336mm to capture the pickup’s real-world proportions perfectly. A longer wheelbase also translates into greater climbing stability and a smoother, more stable ride over rough terrain. Clipless Body Mounting The clipless body’s hidden latching system gives F-150 High Trail Edition clean, flowing lines for new level of scale realism and convenience. On the trail, F-150’s clipless body holds tight when you need it, but releases in just seconds to access the chassis. Specs: Length: 566mm Front Track: 270mm Rear Track: 270mm Center Ground Clearance: 99mm Weight (w/o battery): 3.33kg Height (overall): 275mm Wheelbase: 13.23 inches (336mm) Approach Angle: 73.5° Departure Angle: 49.67° Breakover Angle: 67° Front Shock Length: 110mm Rear Shock Length: 110mm Front Wheels: 2.2 x 1.34 inches (56 x 34mm) Rear Wheels: 2.2 x 1.34 inches (56 x 34mm) Front Tires: 5.3 x 2.14 inches (135 x 54mm) Rear Tires: 5.3 x 2.14 inches (135 x 54mm) Hex Size: 12mm Speed Control: XL-5 HV Motor (electric): 21T Reverse Rotation Transmission: 2-speed High/Low, Remote Shifting Gear Pitch: 32 Pitch Differential Type: 4 Gear, Remote Locking Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Cross-members Brake Type: Electronic “Hill Hold” Drive System: Shaft Driven 4WD Steering: Chassis Mounted Servo Servo: 2075X Metal Gear Transmitter: TQi™ 2.4 GHz 4-Channel Transmitter Receiver: 6533 Skill Level: 1 Battery Tray: L158.8 x W47 x H23/26mm Motor Specs: Type: High-torque brushed motor Size: 550 Weight: 390g Length: 78mm (overall), 57mm (can) Diameter: 38.9mm Turns: 21T reverse rotation Voltage: 16.8V ESC Specs: Motor Limit: 21-turns (550 size) Peak Current - Forward: 100A Peak Current - Reverse: 100A Braking Current: 60A Continuous Current: 18A BEC Voltage: 6.0 VDC BEC Current: 1A Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off) Thermal Protection: Thermal Shutdown Single-button setup: Yes, Traxxas EZ-Set® ESC Profile selections: Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, no REV Training Mode:* 50% FWD, 100% brakes, 50% REV Trail Mode: 100% FWD, 100% Brake, 100% REV, Trail-Tuned Brake on Neutral Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral * Patented What’s In The Box: TRX-4, Ready-To-Explore® model XL-5 HV waterproof electronic speed control Titan® 21T reverse rotation motor TQi™ 2.4GHz radio system with cruise control High quality maintenance tools What You’ll Need: Battery: TRX-4 accepts a wide variety of NiMH (4–7 cell) and LiPo (2s–3s) batteries Charger: Traxxas EZ-Peak® Live charger is recommended for easy and fast charging performance (model #2971) AA Alkaline Batteries: Four AA alkaline batteries for the transmitter Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.

7.995,-

8.495,-

KJØP

-6%

Traxxas 920464 TRX-4 Crawler F150 High Trail Brown RTR

Art.nr: TRX 92046-4-BROWN

Copied

Traxxas TRX-4 Ford F-150 Ranger XLT Scale & Trail Crawler Hight Trail Edition - BROWN The Traxxas lineup of exciting and capable High Trail TRX-4® models is expanding with the all-new 1979 Ford® F-150® truck. Sporting top-of-the-line Ranger XLT trim, the Ford F-150 High Trail is equipped with a factory-installed Long Arm Lift Kit and stands over an inch taller than our standard height TRX-4. The exceptional all-terrain capability, smooth running drivetrain, and Traxxas Tough® durability drivers expect from TRX-4 are all there. Black roll bar, chrome light housings, longer wheelbase, and slotted aluminum-finish mags complete the authentic, period correct look. High Trail Edition Large 2.2" slotted mag wheels and Canyon Trail tires tame even the most technical trails to extend your scale adventures farther than ever before. The factory-installed Long Arm Lift Kit raises F-150 High Trail™ Edition over an inch taller for superior ground clearance. Extended 336mm Wheelbase F-150’s extended steel ladder frame lengthens the wheelbase to 336mm to capture the pickup’s real-world proportions perfectly. A longer wheelbase also translates into greater climbing stability and a smoother, more stable ride over rough terrain. Clipless Body Mounting The clipless body’s hidden latching system gives F-150 High Trail Edition clean, flowing lines for new level of scale realism and convenience. On the trail, F-150’s clipless body holds tight when you need it, but releases in just seconds to access the chassis. Specs: Length: 566mm Front Track: 270mm Rear Track: 270mm Center Ground Clearance: 99mm Weight (w/o battery): 3.33kg Height (overall): 275mm Wheelbase: 13.23 inches (336mm) Approach Angle: 73.5° Departure Angle: 49.67° Breakover Angle: 67° Front Shock Length: 110mm Rear Shock Length: 110mm Front Wheels: 2.2 x 1.34 inches (56 x 34mm) Rear Wheels: 2.2 x 1.34 inches (56 x 34mm) Front Tires: 5.3 x 2.14 inches (135 x 54mm) Rear Tires: 5.3 x 2.14 inches (135 x 54mm) Hex Size: 12mm Speed Control: XL-5 HV Motor (electric): 21T Reverse Rotation Transmission: 2-speed High/Low, Remote Shifting Gear Pitch: 32 Pitch Differential Type: 4 Gear, Remote Locking Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Cross-members Brake Type: Electronic “Hill Hold” Drive System: Shaft Driven 4WD Steering: Chassis Mounted Servo Servo: 2075X Metal Gear Transmitter: TQi™ 2.4 GHz 4-Channel Transmitter Receiver: 6533 Skill Level: 1 Battery Tray: L158.8 x W47 x H23/26mm Motor Specs: Type: High-torque brushed motor Size: 550 Weight: 390g Length: 78mm (overall), 57mm (can) Diameter: 38.9mm Turns: 21T reverse rotation Voltage: 16.8V ESC Specs: Motor Limit: 21-turns (550 size) Peak Current - Forward: 100A Peak Current - Reverse: 100A Braking Current: 60A Continuous Current: 18A BEC Voltage: 6.0 VDC BEC Current: 1A Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off) Thermal Protection: Thermal Shutdown Single-button setup: Yes, Traxxas EZ-Set® ESC Profile selections: Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, no REV Training Mode:* 50% FWD, 100% brakes, 50% REV Trail Mode: 100% FWD, 100% Brake, 100% REV, Trail-Tuned Brake on Neutral Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral * Patented What’s In The Box: TRX-4, Ready-To-Explore® model XL-5 HV waterproof electronic speed control Titan® 21T reverse rotation motor TQi™ 2.4GHz radio system with cruise control High quality maintenance tools What You’ll Need: Battery: TRX-4 accepts a wide variety of NiMH (4–7 cell) and LiPo (2s–3s) batteries Charger: Traxxas EZ-Peak® Live charger is recommended for easy and fast charging performance (model #2971) AA Alkaline Batteries: Four AA alkaline batteries for the transmitter Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.

7.995,-

8.495,-

KJØP

-6%

Hobbywing QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 ...

Art.nr: HW30120202

Copied

QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 Crawler 2-3S Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate 30120202

699,-

749,-

KJØP

-7%

Multiplex 02488 RR Vulcanair Partenavia Aircraft P-68C

Art.nr: 17-1-02488

Copied

Multiplex RR Vulcanair Partenavia Aircraft P-68C Description The Vulcanair Aircraft P.68C is a twin-engined high-wing aircraft with six seats and a tricycle undercarriage. The machine is employed for pilot training as well as its primary application as a cruising and transport aircraft. Twin engines make the P.68C a stable, good-natured aircraft in all flying conditions, and its excellent flying qualities make it very popular amongst its many pilots. The new Partenavia P.68 from Multiplex spans 1400 mm, and is a semi-scale version of the machine intended for experienced model pilots. The two ROXXY BL Outrunner C28-28-1400 kV contra-rotating brushless motors provide ample power in conjunction with the two MULTIcont BL-20 P68 speed controllers and a 3S 2600 mAh battery, and eliminate the tendency to yaw with varying airspeed. The model is exceptionally docile, but is still capable of aerobatics such as rolls, loops and inverted flight. The CNC-machined noseleg is sprung to eradicate any tendency to bounce on landing, while additional features such as factory-installed LED landing and navigation lights and working landing flaps endow the model with a special charm. The spacious battery compartment accepts 3S batteries from 2200 to 5000 mAh capacity, giving a broad range of performance and flight duration. The perfectly clear windscreen is ideal for the installation of an FPV system for even more flying fun. The bright red color scheme ensures excellent visibility and orientation in the air. Specifications Wingspan in mm: 1400 Overall length in mm: 1066 All up weight in g: 1550 Flight time in minutes: about 10 RC functions: ailerons, elevator, rudder, flaps, motor Contents: ELAPOR®-model largely assembled, incl. 2 motors ROXXY BL Outrunner C28-28-1400kV, 2 speed controllers Multiplex MULTIcont BL-20 P68, propeller 8″ x 5″, servos MS-12015 DIGI, MS-12022, MG DIGI, applied decals and detailed manual

4.695,-

4.995,-

KJØP

-6%

Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ...

Art.nr: 47308

Copied

Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI NO ESC Volkswagen Golf Mk.1 Racing Group 2 byggesett. Racing utgave av førstegenerasjons golf fra 70-tallet. Dekaler til karosseriet medfølger. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere NiMH eller LiPO batteri ESC (fartskontroller) Batterilader PS lakk Anbefales: Tamiya kulelagre Yeah Racing kulelagre Anbefalte farger: PS-1 White PS-6 Yellow PS-7 Orange PS-31 Smoke PS-34 Bright Red TS-12 Oranger TS-16 Yellow TS-26 Pure White TS-29 Semi Gloss Black TS-49 Bright Red Fra produsenten: Length: 329mm. Image shows assembled and painted kit. The Comeback of a Classic! This R/C model assembly kit depicts the striking Kamei-sponsored Group 2 VW Golf which made a splash in 1970s touring car racing. The polycarbonate body accurately captures the form of the racing Golf, with wide front fenders and a sporty front spoiler. Stickers are included to recreate sponsor logos, numbers, etc. M-05: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Racing slick tires feature tire inserts. Specifications ●Length: 329mm, Width: 175mm, Height: 120mm ●Wheelbase: 210mm　●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 25/55mm ●Monocoque Frame ●3-Bevel Differential Gear ●Front-Wheel 2WD ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio = 5.8:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately) Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

1.495,-

1.595,-

KJØP

-6%

Traxxas 9749 Suspension Steel Link Set F&B Set TRX-4M

Art.nr: TRX 9749

Copied

Traxxas 9749 Suspension link set, steel (includes 4x53mm front lower links (2), 4x46mm front upper links (2), 4x68mm rear lower or upper links (4)) Take your TRX-4M™ to the next level by replacing the standard suspension links with these heavy-duty steel links. In addition to being virtually indestructible, steel links add valuable ounces to the lowest part of your TRX-4M for improved anti-rollover stability. Links come assembled and ready to mount with rod ends and steel hollow balls. Includes 4x53 mm front lower links (2), 4x46 mm front upper links (2), and 5x56 mm rear upper and lower links (4). Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

469,-

499,-

KJØP

-6%

Proline 3596-00 Body Cliffhanger High Performance ...

Art.nr: 3596-00

Copied

PRO-LINE 1/24 Cliffhanger High Performance Clear Body for SCX24 Introducing Pro-Line's Cliffhanger body for the SCX24™! Just like the larger Cliffhanger for 12.3" Crawlers, this mini-Cliffhanger features a pinched front end and a dove-tailed rear end for maximum tire clearance while still maintaining a true-to-scale appearance. The Cliffhanger is made from a single piece of crystal-clear polycarbonate to save on weight and has a molded-in drop-down bed to make room for you to add your favorite tiny scale accessories. Everything on the Cliffhanger body has been optimized for maximum crawling performance for your SCX24™. This body also includes optional headlight buckets for added scale appearance. Don't get stuck on the rocks, get your very own Cliffhanger body today! Features: Designed Specifically for your SCX24™ Pinched Front End and Dove-tailed Rear End for Max Tire Clearance Maintains True-to-Scale Appearance Made from a Single Piece of Crystal-Clear Polycarbonate Maximum Crawler Performance Optional Headlight Buckets Included Paint-then-peel Overspray Film Built-in Made with Crystal Clear Polycarbonate Made in the USA In The Bag: (1) Cliffhanger High Performance Clear Body for SCX24™ (1) Window Masks (1) Decal Sheet Fits: Axial® SCX24™ Specs: Body Style: Cliffhanger Material: Polycarbonate (clear) Product Height: 60mm Product Length: 187mm Product Width: 79mm Scale: 1/24 Vehicle Type: Rock Crawler Wheelbase: 136 mm

379,-

399,-

Ikke på lager

-5%

Traxxas 9735 Bumper Front & Rear Ford Bronco TRX-4M

Art.nr: TRX 9735

Copied

Traxxas 9735 Bumper, front (1)/ rear (1) Replacement part for these models: TRX-4M 1/18 Ford® Bronco®

69,-

KJØP

Dynomax 9708 XT60 DC Input Leads with Lead-Battery ...

Art.nr: B9708

Copied

This D-Max charger input harness fits many SkyRC chargers at the DC-input socket and is ideal when you want to use your charger with a 12V DC battery. Features: Perfect when you want to use your DC charger out in the field with an 12V Pb battery as a power source Charger connector: XT60 Battery clips: Large enough to grip 12V car battery poles Wires: Flexible 12AWG - 610 mm long Fits: SkyRC D100 (V2) - SK100131 SkyRC D200 - SK100097-03 SkyRC Q200 - SK100104 SkyRC D250 - SK100129-01 SkyRC D400 - SK100123-02 Does NOT fit these (use #B9708B for them): SkyRC B6 Nano - SK100134 SkyRC E4Q - SK100140 SkyRC B6 Lite - SK100151-01 SkyRC T200 - SK100155-02 SkyRC 30A Power Supply - SK200013 SkyRC 50A Power Supply - SK200015

169,-

KJØP

Dynomax 9333B Connector XT30 2mm 50 pair

Art.nr: B9333B

Copied

Dynomax 9333B Connector XT30 2mm 50 pair

729,-

799,-

KJØP

-9%

Nye produkter

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Kategorier

Nylige søk

Søkeresultater

Nye produkter

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler

HPI El-Biler