Hopp til innhold

Verktøy/Lakk/Lim

Art.nr: 53338
Copied
En jigg som lar enklere lime Tamiya dekk og felg sammen, med mindre risiko for søl. Kompatible Tamiya produkter: 50684, 53214, 53220, 53222, 53224, 53227, 53254, 53293, 53294, 53340, 53412, 53433, 53482 og flere.  

179,-

199,-

** Ikke på lager
KJØP
-10%
Art.nr: 53439
Copied
ANTI-WEAR GREASE (3G)

89,-

99,-

På lager 5
KJØP
-10%
Art.nr: 54032
Copied
Tamiya 54032 ANAEROBIC GEL THREAD LOCK DESCRIPTION: Tamiya is now releasing a new easily applied screw lock gel for helping in the prevention of looseness in metal parts in R/C vehicles. It can also be applied on chassis" as well engines.

79,-

På lager 1
KJØP
Art.nr: 54152
Copied
This is the Tamiya Damper Oil Air Remover. FEATURES Draws air bubbles from oil-filled shocks during assembly  Ideal for 1/8 scale glow powered vehicles with long shocks INCLUDES Air Remover, Pump, Sticker and Instruction Manual

519,-

På lager 1
KJØP
Art.nr: 54294
Copied
Denne høyviskositetsoljen er perfekt for bruk i oljefylte (front) differensialer Innhold: 40cc.

199,-

** Ikke på lager
KJØP
Art.nr: 54693
Copied
TAMIYA 54693 - DOUBLE-SIDED TAPE 20MMX2M   This high quality heat-resistant double-sided tape is often used on R/C models to secure and protect equipment. This version comes in roll form compared to Item 50171, which came in individual strips. It’s perfect for frequent users. Double-Sided Tape (20mm x 2m roll) x1

119,-

129,-

** Ikke på lager
KJØP
-8%
Art.nr: 54792
Copied
This polycarbonate reinforcing mesh tape is the perfect solution for hobbyists that are a little more than rough with their bodies. With this tape you can easily reinforce spoilers, fenders and the like with this handy mesh type tape, simply apply clear silicone adhesive to secure the mesh tape in place. • 2-meter roll of mesh tape (35mm width) x1 • Apply to the inside of the body, on the area you wish to reinforce. • Fix into place with separately sold clear silicone adhesive found at local hardware stores.

99,-

** Ikke på lager
KJØP
Art.nr: 54974
Copied
Gjennomsiktig rødt, oransje og gult klistremerke. Klipp og tilpass til forskjellige lykter for ønsket effekt. Mye lettere å få et pent resultat med disse dekalene enn med maling.   Fra produsenten: ★Translucent red, orange and yellow stickers can be used on various lights for super realism, and no worries about inconsistency of finish that can occur if using paint. ★Cut to desired size and apply to the model. ★Sticker sheet size: 400mm x 140mm.  

129,-

På lager 1
KJØP
Art.nr: 69944
Copied
PS Dark Blue er laget spesielt for Tamiya 1/10 R/C Fiat 131 Abarth Rally Olio Fiat. PS Serien er laget spesielt for polykarbonat/lexan karosseriene til radiostyrte biler. Rengjør karosseriet på innsiden med Tamiya sin Body Cleaner. Påfør et lag om gangen på innsiden av karosseriet. Utsiden skal ikke lakkeres. Spray et tynt lag på innsiden, la det tørke. Repeter så prosessen. Det er viktig med flere tynne lag for et bra resultat. Påfører man for mye så begynner lakken å renne. To til tre lag er som regel nødvendig, før man avslutter med et lag hvitt eller svart. En boks på 100ml holder som regel til et karosseri. Lakken tåler olje og drivstoff, så kan trygt brukes på radiostyrte modeller med forbrenningsmotor. Viktig: Bruk aldri PS lakk på plastbyggesett. TS, AS, X og XF kan benyttes til plastbyggesett. 100ml sprayboks   Fra produsenten: ★This tone is perfect for recreating the color used on the 1/10 R/C Fiat 131 Abarth Rally Olio Fiat model. ★Contents: 100ml

149,-

På lager 3
KJØP
Art.nr: 74001
Copied
Dette er en presisjons sidekutter for å fjerne deler fra støpe-treet – altså fra plast brettet – uten å skade dem. Den slagfaste kromvanadiske legeringen er utviklet eksklusivt for plastmodellering og er valgt for lang levetid. Høykvalitets vinylbelegg sikrer godt grep. Dette er ett MUST for modellbyggeren. Denne må du ha for å lykkes med ditt plast sett.

399,-

449,-

** Ikke på lager
KJØP
-11%
Art.nr: 74003
Copied
This is an Angled Tweezers from Tamiya.     FEATURES Handy when handling small parts and adding decals to your models.  The edges of the tweezers are rounded to prevent scratching.  Stainless steel with a Black cationic finish for long life.  Carded packaging.   INCLUDES One Angled Tweezers.   SPECIFICATIONS  Length: 6" (15.2cm)  sdw 10/31/01

129,-

På lager 1
KJØP
Art.nr: 74005
Copied
This is the Tamiya Curved Tip, Lexan Plastic Body Scissors. FEATURES: Curved tip specially designed to cut polycarbonate bodies used             on radio controlled vehicles.  These can also be used for airplane             canopies, helicopter windshields and other plastics.           Black plastic handle for comfort and control.           Stainless steel cutting blades. INCLUDES: One pair of Body Scissors SPECS:    Blade Cutting Area: 1" (25mm) approximately           Overall Length: 5-1/2" (140mm) approximately

199,-

Ikke på lager
Ikke på lager
Art.nr: 74007
Copied
This is a #1 Medium Phillips Screwdriver from Tamiya. FEATURES: Impact resistant Chrome vanadic Alloy material for long life.           Originally designed pentagonal grip molding of acetylcellulose that             has excellent durability and assures a firm grip.           Carded packaging. INCLUDES: One #1 Medium Phillips Screwdriver. SPECS:    Length: 6" (15.2cm)

69,-

79,-

** Ikke på lager
KJØP
-13%
Art.nr: 74008
Copied
Flat trekker fra Tamiya. No. 1 bits – medium. Med ett godt håndtak. Kvalitets verktøy.

59,-

69,-

På lager 2
KJØP
-14%
Art.nr: 74010
Copied
This is the Tamiya Pocket Tool Set MD010 Specs and Features: This is a very handy pocket sized tool set that is neatly packaged in a colorful plastic case. The set included small ( + ) and ( - ) screwdrivers, plus a file . This is a little tool set that can make assembly and adjustments a pleasure.

99,-

119,-

** Ikke på lager
KJØP
-17%
Art.nr: 74016
Copied
This is a Basic Tool Set from Tamiya. FEATURES: Contains the basic indispensable tools for model and craft work.           One pair of side cutters for plastic.           One angled tweezers.           Small phillips screwdriver.           Small slotted screwdriver.           One craft knife.           One metal file.           Packed in a handy plastic case. INCLUDES: One Basic Tool Set.                                 

349,-

379,-

På lager 1
KJØP
-8%
Art.nr: 74017
Copied
     This is a Package of Two Paint Stirrers from Tamiya. FEATURES: Stainless steel tool is designed for stirring bottled paints and for             blending different color shades.           One end is shaped like a small spoon, while the other is flat like             a spatula.           Carded packaging. INCLUDES: Two Metal Paint Stirrers. SPECS:    Length: 5.9" (15cm)

59,-

På lager 2
KJØP
Art.nr: 74019
Copied
Tamiya Mini Razor Saw Spare Blade Set

69,-

På lager 1
KJØP
Art.nr: 74023
Copied
This is a Builders 8" Screwdriver Set from Tamiya. Features: This is a set of 8 screwdrivers of assorted types and sizes. Three phillips screwdrivers. Two slotted screwdrivers. Two nut drivers. One hex wrench. One detachable grip. Packaged in a handy plastic carrying case.       (12)

289,-

299,-

På lager 3
KJØP
-3%
Art.nr: 74024
Copied
The Tamiya Modelling Razor Saw This handy razor saw is ideal for cutting plastic and wood, during modeling   and craft works. The extremely thin blade is made of high quality steel, enabling   sharp finish. Blade length is 160mm, and width is 40mm. Comes with a spare blade.

219,-

På lager 2
KJØP
Art.nr: 74031
Copied
 These are 4-1/2" Decal Scissors from Tamiya. FEATURES: Black plastic handles           Black steel blades INCLUDES: One pair of Hobby Scissors SPECS:    Length: 4-1/2" overall                       1" blade only

239,-

269,-

** Ikke på lager
KJØP
-11%
Art.nr: 74034
Copied
Needle Nose Pliers with Cutter ★These quality long nose pliers with cutter will come in doubly handy when bending wire or holding parts tight during the construction of R/C kits. ★They have a slim jaw to help access hard-to-reach areas.  

389,-

429,-

** Ikke på lager
KJØP
-9%
Art.nr: 74035
Copied
This is a Sharp Pointed Side Cutter from Tamiya.     FEATURES This precision side cutter has thin, pointed blades, and is ideal  for removing delicate plastic parts from the sprue.  The blades are made from quality chrome-vanadic alloy, and are  hand-finished for the utmost sharpness.  Carded packaging.   INCLUDES One Sharp Pointed Side Cutter.   SPECIFICATIONS  Length: 4-1/2" (11.4cm)

399,-

439,-

På lager 1
KJØP
-9%
Art.nr: 74044
Copied
This is a Fine Drill Bit Set from Tamiya. FEATURES Metal drill bits.0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm drill bits. Plastic storage case. INCLUDES One Fine Drill Bit Set.

195,-

** Ikke på lager
KJØP
Art.nr: 74048
Copied
This is an HG Straight Tweezers from Tamiya. FEATURES: These straight tweezers are designed to directly transmit movements             of the fingers right to the extreme tips.           Ideal for minute modeling tasks.           High grade stainless steel.           Finely crafted edges and points.           Carded packaging. INCLUDES: One HG Straight Tweezer. SPECS:    Length: 4-1/2" (11.4cm)

179,-

199,-

På lager 1
KJØP
-10%
Art.nr: 74049
Copied
This is a Basic Drill Bit Set from Tamiya. FEATURES Metal drill bits. 1mm, 1.5mm, 2mm, 2.5mm and 3mm drill bits. Plastic storage case. INCLUDES One Basic Drill Bit Set.

199,-

På lager 1
KJØP
Art.nr: 74050
Copied
Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill bits under 1 mm diameter.

239,-

249,-

På lager 1
KJØP
-4%
Art.nr: 74051
Copied
Tamiya Fine Pin Vise S (0.1-1.0mm)

139,-

149,-

På lager 5
KJØP
-7%
Art.nr: 74052
Copied
Decal Tweezers

209,-

På lager 1
KJØP
Art.nr: 74053
Copied
Tamiya Fine Craft Knife

119,-

På lager 1
KJØP
Art.nr: 74056
Copied
Tamiya 74056 CUTTING MAT (A4/BEIGE)

179,-

På lager 2
KJØP
Art.nr: 74062
Copied
Following the successful release of flat plastic modeling files at the 2004 Shizuoka Hobby Show, Tamiya now introduces a new rounded file specially designed for use with plastic. Featuring all the same aspects as the original flat files, such as wave pattern teeth, chip breaker groove, easy grip etc., this rounded file is perfect for rounded and concave shaped areas. Basic Specifications Dimensions: Length 200mm, Width 15mm, Thickness 3mm, Curve R10 Features wave pattern teeth specially designed to give you a professional finish with plastic. Chip breaker groves prevent teeth from clogging with shavings, ensuring continued high quality finish. Special coating on handle for excellent grip. Designed for plastic only, must not be used with metal.

219,-

På lager 3
KJØP
Art.nr: 74063
Copied
Following the successful release of flat plastic modeling files at the 2004 Shizuoka Hobby Show, Tamiya now introduces a new rounded file specially designed for use with plastic. Featuring all the same aspects as the original flat files, such as wave pattern teeth, chip breaker groove, easy grip etc., this rounded file is perfect for rounded and concave shaped areas. Basic Specifications Dimensions: Length 200mm, Width 10mm, Thickness 2mm, Curve R7.5 Features wave pattern teeth specially designed to give you a professional finish with plastic. Chip breaker groves prevent teeth from clogging with shavings, ensuring continued high quality finish. Special coating on handle for excellent grip. Designed for plastic only, must not be used with metal.

229,-

På lager 2
KJØP
Art.nr: 74066
Copied
  This is the Tamiya Diamond File for photo etched parts. FEATURES: Comfortable Blue handle           Black vinyl pouch INCLUDES: One Diamond file SPECS:    Length:     7" (174mm)           Diameter: 1/8"   (4mm)

99,-

På lager 1
KJØP
Art.nr: 74068
Copied
This is a pair of Modeling Scissors from Tamiya                         for photo etched parts. FEATURES: Small size blades (1mm) lasts longer than modeling knife for cutting           small parts           Steel construction           Cap included to protect blades INCLUDES: One pair of modeling scissors REQUIRES: Nothing SPECS:    Length overall: 3.470" (88.15mm)           Thickness of blades: 1mm COMMENTS: Not for use on thicker sufaces

239,-

249,-

På lager 3
KJØP
-4%
Art.nr: 74073
Copied
Hard Coated File PRO - Half Round 7.5mm width

359,-

På lager 2
KJØP
Art.nr: 74075
Copied
Tamiya 74075 – Reserveblader til modelleringskniv (25 stk.) Tamiya 74075 Modeler's Knife Replacement Blade er et sett med 25 skarpe reserveblader til Tamiya modelleringskniv 74040. Bladene er utviklet for presisjonsarbeid ved bygging og tilpasning av plastmodeller, RC-modeller og andre hobbyprosjekter. Et skarpt knivblad gir bedre kontroll og gjør det enklere å oppnå rene og nøyaktige kutt. Ved å bytte ut slitte eller sløve blader opprettholder du presisjonen og reduserer behovet for å bruke unødvendig kraft under arbeidet. Egenskaper og fordeler 25 reserveblader: Praktisk pakning som varer gjennom mange modellbyggeprosjekter. Presisjonsblader: Egnet for detaljert skjæring, trimming og tilpasning av plastdeler. Skarp spiss: Gjør det enklere å arbeide med små detaljer og på vanskelig tilgjengelige steder. Enkel utskifting: Bytt blad når det blir sløvt for å opprettholde god kutteytelse. Praktisk oppbevaring: Leveres i en plastbeholder som også kan brukes til oppbevaring av brukte blader. Bruksområder Fjerning av støpegrader og støpelinjer på plastmodeller Trimming og tilpasning av små plastdeler Detaljarbeid på modellbiler, fly og andre byggesett Forming og finjustering av modellbyggingsmaterialer Presisjonsarbeid ved RC- og skalamodellbygging Kompatibilitet Reservebladene er beregnet for Tamiya 74040 Modeler's Knife. De kan også brukes med Tamiya 74098 Modeler's Knife Pro. Merk: Dette produktet inneholder kun reserveblader. Knivhåndtak følger ikke med. Tekniske spesifikasjoner Produsent Tamiya Varenummer 74075 Produktnavn Modeler's Knife Replacement Blade Produkttype Reserveblader til modelleringskniv Antall 25 stk. Kompatible kniver Tamiya 74040 og 74098 Oppbevaring Plastbeholder EAN 4950344062324 Viktig sikkerhetsinformasjon Bladene er svært skarpe og må håndteres med forsiktighet. Oppbevares utilgjengelig for barn. Brukte blader skal oppbevares og kastes på en sikker måte for å unngå kuttskader. English product description Tamiya 74075 – Modeler's Knife Replacement Blade (25 pcs.) This set contains 25 replacement blades for the Tamiya Modeler's Knife, supplied in a convenient plastic container. Sharp replacement blades help maintain precise cutting performance during plastic model construction and other detailed hobby work. Replace worn blades promptly to ensure clean, controlled cutting and trimming. Features 25 replacement knife blades Designed for Tamiya Modeler's Knife (Item 74040) Also compatible with Tamiya Modeler's Knife Pro (Item 74098) Ideal for precision cutting, trimming and removing mold lines Supplied in a plastic storage container Container can also be used to store used blades Specifications Manufacturer: Tamiya Item number: 74075 Quantity: 25 blades Type: Modeler's Knife Replacement Blades Compatible tools: Tamiya 74040 and 74098 Note: Knife handle is not included. Blades are extremely sharp and should be handled and disposed of with care. Keep out of reach of children.

69,-

På lager 3
KJØP
Art.nr: 74076
Copied
This is the Tamiya Cutting Mat A3 Size.     FEATURES Three layer design features a harder outer layer on the top & bottom  of the mat with a softer center layer  Perfect for cutting parts off of trees, cutting decals or any cutting  with a hobby kife that would damage your table  Metric rulers printed on the face make it easy to measure parts you  are cutting   INCLUDES One Cutting Mat   REQUIREMENTS Nothing is required   SPECIFICATIONS  Length: 17.75" (450mm)  Width: 12.75" (322mm)  Thickness: .80" (2mm)

259,-

279,-

På lager 3
KJØP
-7%
Art.nr: 74077
Copied
Tamiya PAINT JAR STAND Rotating two-tier paint jar stand lets you organize your paints clearly for easy access. It can store up to 7 jars of acrylic “mini” or 9 jars of enamel paints per tray. Each tray has a small groove along its edge, allowing you to also use this as a drying stand simply by using alligator clips (4 included) to hold newly painted parts. *PAINT NOT INCLUDED

289,-

319,-

På lager 2
KJØP
-9%
Art.nr: 74085
Copied
This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. About the Item •No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. •1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. •Size 5 minus (-) screwdriver. •Size 5.5 & 7 box driver. •Comes with a convenient driver stand. Tamiya Craft Tools R/C Tool Set 74085

369,-

399,-

På lager 6
KJØP
-8%
Art.nr: 74111
Copied
This handy tool is perfect for modifying plastic models or Mini 4WD machines, as well as woodcraft. Its blades are slightly thicker than Item 74018 Mini Razor Saw and therefore less prone to distortion or warping. The item includes 2 blades of different width, and features fine teeth which enable it to cut through a variety of materials while leaving a smooth finish. The 2 blades can be inserted into the included plastic grip, which features the Tamiya logo. Includes wide carbon steel blade x1 and slim carbon steel blade x1 Both blades are of .35mm thickness. Wide blade length: 46mm Slim blade length: 43mm

139,-

** Ikke på lager
KJØP
Art.nr: 74112
Copied
The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. Compatible with drill bits of sizes from 0.1-3.2mm. Rotating grip end features built-in ball bearings for smooth movement. Made from nickel-plated brass, with elastomer grip. Features metallic sticker with the Tamiya twin star logo and wording «PIN VISE». The rubber grip is engraved with the wording «TAMIYA».

279,-

299,-

** Ikke på lager
KJØP
-7%
Art.nr: 74118
Copied
This is the Tamiya A4 Size Cutting Mat. FEATURES Three-ply composition with internal hard layer sandwiched by softer outer layers that increase knife blade longetivity while leaving minimal cut marks 1cm grid pattern with 10° increment angles, 1mm step ruler, curved and circular markings INCLUDES Tamiya A4 Size Cutting Mat SPECIFICATIONS Dimensions: 8.9 x 12.7" (226 x 322mm)

169,-

** Ikke på lager
KJØP
Art.nr: 74119
Copied
This is the Tamiya Pro Medium Phillips Screwdriver.     FEATURES For use 2-2.6mm phillips head screws  Ideal for R/C models, Mini 4WD cars, crafts, hobbies and much more  PH1x100mm bit size  Ergonomic composite plastic handle with hole to hang from pegboard   INCLUDES Tamiya Pro Medium Phillips Screwdriver   SPECIFICATIONS  Length: 7.25" (184mm) including handle

129,-

** Ikke på lager
KJØP
Art.nr: 74120
Copied
This is the Tamiya Pro (L) Phillips Head Screwdriver.     FEATURES Hardened steel shaft with magnetic tip  For use with 3-5mm (JIS M3-M5) phillips head screws  2-color polypropylene (PP) and elastomer grip with hole for hanging  on pegboard hook or nail   INCLUDES Tamiya Pro (L) Phillips Head Screwdriver   SPECIFICATIONS  Total Length: 7.9" (201mm)

169,-

** Ikke på lager
KJØP
Art.nr: 74122
Copied
Use this handy tool to punch out circular pieces of masking tape, or plastic plate up to 0.5mm in thickness. ★Features a rotating grip. ★Exchange 2mm and 3mm bits with ease.

349,-

369,-

På lager 1
KJØP
-5%
Art.nr: 74123
Copied
Tamiya 74123   ★This tool is designed to remove plastic model parts from their sprues. ★The sharp jaw blades offer an excellent cutting edge, with their even slimmer form enabling easier removal of smaller parts with less clearance. ★Features a comfortable black non-slip grip. ★Length: 115mm.

469,-

499,-

** Ikke på lager
KJØP
-6%
Art.nr: 74124
Copied
Tamiya 74124 Craft Scissors For Plastic/Soft Metal These versatile scissors are a must-have addition to every modelers' tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other materials/thicknesses above and beyond the capabilities of standard scissors. • Length: 170mm; blade length: 40mm. • Blade material: anti-rust treated stainless steel. • Features a stylish navy blue grip. Suitable material thicknesses that may be cut: Note: materials and thicknesses are intended as a guideline only. • Tamiya Pla-plate: up to 1.2mm • Tamiya Clear Pla-plate: up to 0.5mm • Polycarbonate: up to 1.0mm • Other plastics: up to 1.0mm • Aluminum: up to 0.5mm • Copper/Brass/Nickel: up to 0.3mm • Leather: up to 2.0mm • Paper: up to 2.0mm • Cardboard/Rubber sheeting: up to 5.0mm

299,-

329,-

På lager 1
KJØP
-9%
Art.nr: 74137
Copied
Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs. • Fine Engraving Blade x1 • Total length: 25mm. Shank diameter: 2mm. • Recommended for use with dedicated holder Item 74139 Engraving Blade Holder. Also, compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112). • Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result. • Each blade comes in a case that can hold up to ten blades. • A color-coded marking on the shank allows easy identification of blade thickness.

379,-

På lager 1
KJØP
Art.nr: 74138
Copied
Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs. • Fine Engraving Blade x1 • Total length: 25mm. Shank diameter: 2mm. • Recommended for use with dedicated holder Item 74139 Engraving Blade Holder. Also, compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112). • Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result. • Each blade comes in a case that can hold up to ten blades. • A color-coded marking on the shank allows easy identification of blade thickness.

379,-

På lager 2
KJØP
Viser 401 til 450 (av 1122 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png